On demand process time limit.

Hello, I would like to know if Apex has time out limit on "On demand process" ? I have a long running insert query in my on demand process and I was hoping that the process will complete when the query finishes, but it doesn't seem that way. Is the time out for an on demand process the same as the time out time for Apex pages?
George

I was hoping that the process will complete when the query finishesWhy should the Ondemand process run after the PLSQL block has completed.
Do you have some kind of infinite loop happening over the ajax call ? Even so you might face something like "too much recursion" error in Javascript.

Similar Messages

How to process very large internal tables and stop time limit

Hello Experts,
I am currently having a problem on how to fix a certain report where we process more than 500 thousand
records in the internal table. I can't think of any solution that can make the below code any faster.
I just checked in our prod server and the error time limit exceeded stops in the loop statement. Anyway,
Below is the code. Any input will be appreciated. Thanks guys and take care!
Get sales document and corresponding line item
SELECT avbeln bposnr a~auart
         avkorg avtweg a~kunnr
         bmatnr bpstyv b~spart
    FROM vbak AS a
   INNER JOIN vbap AS b
      ON avbeln = bvbeln
   APPENDING TABLE lt_vbap
   WHERE a~auart IN lr_auart
     AND a~vbeln IN s_vbeln
     AND a~vbeln IN s_vbill
     AND a~vbtyp EQ p_vbtyp.
LOOP AT lt_vbap ASSIGNING <wa_vbap>.
    IF <wa_vbap>-auart EQ 'ZUCI' OR
       <wa_vbap>-auart EQ 'ZURV' OR
       <wa_vbap>-auart EQ 'ZUPR'.
    Check ifa delivery document has been created
      CLEAR wa_vbill.
      SELECT SINGLE vbeln
        FROM vbfa
        INTO wa_vbill
       WHERE vbelv = <wa_vbap>-vbeln
         AND ( ( vbtyp_n EQ 'J' AND vbtyp_v = 'C' )
          OR ( vbtyp_n EQ 'T' AND vbtyp_v = 'H' ) ).
      IF sy-subrc <> 0.
        <wa_vbap>-del_ind = 'X'.
        CONTINUE.
      ELSE.
      Check if within selection parameters
        CLEAR wa_likp.
        READ TABLE lt_likp INTO wa_likp WITH KEY vbeln = wa_vbill.
        IF sy-subrc <> 0.
          SELECT SINGLE *
            FROM likp
            INTO wa_likp
           WHERE vbeln = wa_vbill.
          APPEND wa_likp TO lt_likp.
        ENDIF.
        IF NOT wa_likp-wadat_ist IN s_erdat.
          <wa_vbap>-del_ind = 'X'.
          CONTINUE.
        ENDIF.
      ENDIF.
    ELSE.
Check if this has already been billed
      CLEAR wa_vbill.
      SELECT SINGLE vbeln
        FROM vbfa
        INTO wa_vbill
       WHERE vbelv = <wa_vbap>-vbeln
         AND ( ( vbtyp_n EQ 'M' AND vbtyp_v = 'C' )
          OR ( vbtyp_n EQ 'O' AND vbtyp_v = 'H' ) ).
      IF sy-subrc <> 0.
        <wa_vbap>-del_ind = 'X'.
        CONTINUE.
      ELSE.
      Check if within selection parameters
        CLEAR wa_vbrk.
        READ TABLE lt_vbrk INTO wa_vbrk WITH KEY vbeln = wa_vbill.
        IF sy-subrc <> 0.
          SELECT SINGLE vbeln fkdat
            FROM vbrk
            INTO wa_vbrk
           WHERE vbeln = wa_vbill.
          APPEND wa_vbrk TO lt_vbrk.
        ENDIF.
        IF NOT wa_vbrk-fkdat IN s_erdat.
          <wa_vbap>-del_ind = 'X'.
          CONTINUE.
        ENDIF.
      ENDIF.
    ENDIF.
Get Material Type and Division
    IF <wa_vbap>-spart IS NOT INITIAL.
      SELECT SINGLE mtart
        FROM mara
        INTO lv_mtart
       WHERE matnr = <wa_vbap>-matnr.
    ELSE.
      SELECT SINGLE mtart spart
        FROM mara
        INTO (lv_mtart,<wa_vbap>-spart)
       WHERE matnr = <wa_vbap>-matnr.
    ENDIF.
If material division is same as parameter division
    IF <wa_vbap>-spart = p_spart.
If material is subsidiary-owned
   IF <wa_vbap>-spart in lr_spart.
    If customer is the same as that of parameter division
      IF <wa_vbap>-kunnr NE lr_kunnr OR <wa_vbap>-auart EQ 'ZUDO' OR <wa_vbap>-auart EQ 'ZUS3'.
      If item is a free good, tag order type as 'ZUPR' to treat
      the item the same way as 'ZUPR'
        IF <wa_vbap>-pstyv = 'TANN' OR
           <wa_vbap>-pstyv = 'ZKNF' OR
           <wa_vbap>-pstyv = 'ZKNN' OR
           <wa_vbap>-pstyv = 'ZFLO' OR
           <wa_vbap>-pstyv = 'ZKBF' OR
           <wa_vbap>-pstyv = 'ZKLN' OR
           <wa_vbap>-pstyv = 'ZREN'.
          lv_auart = <wa_vbap>-auart.
          IF lv_auart EQ 'ZUPR'.
            CLEAR <wa_vbap>-pstyv.
          ENDIF.
          <wa_vbap>-auart = 'ZUPR'.
          CLEAR: lv_mtart.
        ENDIF.
      Set Cost of Goods Sold Account
        <wa_vbap>-cogshkont = '0050000010'.
        CASE <wa_vbap>-auart.
          WHEN 'ZUPR'.
            CASE lv_mtart.
              WHEN 'ZUL4'.
                <wa_vbap>-del_ind = 'X'.
                CONTINUE.
              WHEN OTHERS.
              Check if division is defined in mapping table
                READ TABLE lt_ulsub INTO wa_ulsub
                     WITH KEY spart = <wa_vbap>-spart.
                IF sy-subrc = 0.
                  <wa_vbap>-kostl = wa_ulsub-kostlp.
                  <wa_vbap>-bukrs = wa_ulsub-bukrsp.
                  <wa_vbap>-type = 'TP'.
                Set Cost of Goods Sold Account
                  IF lv_auart = 'ZUPR'.
                    <wa_vbap>-cogshkont = '0050000006'.
                  ENDIF.
                ELSE.
                  <wa_vbap>-del_ind = 'X'.
                  CONTINUE.
                ENDIF.
            ENDCASE.
          WHEN 'ZUCI' OR 'ZUDO' OR 'ZURD' OR 'ZUS3'.
        Get cost center from header text
            PERFORM get_cost_center USING <wa_vbap>-vbeln
                                 CHANGING <wa_vbap>-kostl.
* Change by LGTE 11-02-2006
        Check if Medvale sales
            IF <wa_vbap>-auart EQ 'ZUCI' AND <wa_vbap>-kostl IS INITIAL.
              <wa_vbap>-del_ind = 'X'.
              CONTINUE.
        Check if UL Cost Center
            ELSEIF <wa_vbap>-kostl NE gv_ul_kostl.
           IF <wa_vbap>-kostl NE gv_ul_kostl.
* End change.
          Get material division and check if subsidiary product
             SELECT SINGLE spart FROM mara INTO <wa_vbap>-spart
             WHERE matnr = <wa_vbap>-matnr.
              READ TABLE lt_ulsub INTO wa_ulsub
                   WITH KEY spart = <wa_vbap>-spart.
              IF sy-subrc = 0.
              Get requestor's company code from cost center data
                SELECT SINGLE bukrs
                  FROM csks
                  INTO <wa_vbap>-bukrs
                 WHERE kokrs = lc_kokrs
                   AND kostl = <wa_vbap>-kostl
                   AND datbi GE sy-datum
                   AND datab LE sy-datum.
                IF sy-subrc = 0.
                For donations, only include if a subsidiary company is donating
                  IF <wa_vbap>-auart EQ 'ZUDO' OR <wa_vbap>-auart EQ 'ZUS3'.
                    IF NOT <wa_vbap>-kunnr IN lr_kunnrnt.
                      <wa_vbap>-del_ind = 'X'.
                      CONTINUE.
                    ENDIF.
                   CHECK <wa_vbap>-kunnr IN lr_kunnrnt.
                  ENDIF.
                For ZUCI, if the company code of the costcenter is UL, do not include
                  IF <wa_vbap>-bukrs EQ gc_ul_bukrs.
                    <wa_vbap>-del_ind = 'X'.
                    CONTINUE.
                  ENDIF.
                  IF <wa_vbap>-bukrs = wa_ulsub-bukrsp.
                    <wa_vbap>-type = 'RV'.
                  ELSE.
                    <wa_vbap>-type = 'RV'.
                  ENDIF.
                ELSE.
                Check if customer defined in table ZFI_DONATIONS
                  SELECT SINGLE kunnr FROM zfi_donations INTO <wa_vbap>-kostl
                    WHERE kunnr = <wa_vbap>-kostl.
                  IF sy-subrc <> 0.
                    lv_error = 'X'.
                    CONCATENATE 'Cost center/Customer' <wa_vbap>-kostl
                                'does not exist. Please check Sales Order'
                                <wa_vbap>-vbeln
                                INTO lt_disp-message SEPARATED BY space.
                    lt_disp-type = 'E'.
                    <wa_vbap>-del_ind = 'X'.
                    APPEND lt_disp.
                    CONTINUE.
                  ELSE.
                    <wa_vbap>-type = 'RV'.
                  ENDIF.
                ENDIF.
              ELSE.
                <wa_vbap>-del_ind = 'X'.
                CONTINUE.
              ENDIF.
            ELSE.
              <wa_vbap>-del_ind = 'X'.
              CONTINUE.
            ENDIF.
          WHEN OTHERS.
            <wa_vbap>-del_ind = 'X'.
            CONTINUE.
        ENDCASE.
      ELSE.
        <wa_vbap>-del_ind = 'X'.
        CONTINUE.
      ENDIF.
    ELSE.
      <wa_vbap>-del_ind = 'X'.
      CONTINUE.
    ENDIF.
Get company code description
    SELECT SINGLE butxt FROM t001 INTO <wa_vbap>-butxt
     WHERE bukrs = <wa_vbap>-bukrs.
    IF sy-subrc <> 0.
      SELECT SINGLE name1 FROM kna1 INTO <wa_vbap>-butxt
       WHERE kunnr = <wa_vbap>-kostl.
    ENDIF.
Change by LGTE on 11-02-2006
Get Transaction Type
    CASE <wa_vbap>-auart.
      WHEN 'ZUPR'. "UL Promo/Samples
        IF <wa_vbap>-pstyv = 'TANN' OR
           <wa_vbap>-pstyv = 'ZKNF' OR
           <wa_vbap>-pstyv = 'ZKNN' OR
           <wa_vbap>-pstyv = 'ZFLO' OR
           <wa_vbap>-pstyv = 'ZKBF' OR
           <wa_vbap>-pstyv = 'ZKLN' OR
           <wa_vbap>-pstyv = 'ZREN'.
          <wa_vbap>-ltext = 'Free Goods'.
        ELSE.
          <wa_vbap>-ltext = 'Product Samples'.
        ENDIF.
      WHEN 'ZUDO'. "Donations - R/3
        <wa_vbap>-ltext = 'Donations - R/3'.
      WHEN 'ZUCI'. "Donations - ZUCI
        <wa_vbap>-ltext = 'Donations - ZUCI'.
      WHEN 'ZURD' OR 'ZUS3'. "UL Returns - Donation
        <wa_vbap>-ltext = 'UL Returns - Donation'.
    ENDCASE.
Get material description
    SELECT SINGLE maktx
      FROM makt
      INTO <wa_vbap>-maktx
     WHERE matnr = <wa_vbap>-matnr
       AND spras = sy-langu.
Get division from material master
   SELECT SINGLE spart FROM mara INTO <wa_vbap>-spart
    WHERE matnr = <wa_vbap>-matnr.
Get division description
    SELECT SINGLE vtext
      FROM tspat
      INTO <wa_vbap>-vtext
     WHERE spras = sy-langu
       AND spart = <wa_vbap>-spart.
Get Valuation Class
    SELECT SINGLE bklas
      FROM mbew
      INTO lv_bklas
     WHERE matnr = <wa_vbap>-matnr.
Determine G/L of FG Based on Valuation Class
    READ TABLE lt_val_cls INTO wa_val_cls WITH TABLE KEY bklas = lv_bklas.
    <wa_vbap>-fghkont = wa_val_cls-hkont.
Determine Cost Center of Cogs Account
    READ TABLE lt_ulsub INTO wa_ulsub WITH TABLE KEY spart = <wa_vbap>-spart.
    <wa_vbap>-cogskostl = wa_ulsub-kostlp.

Hi!
First of all, don't use SELECT SINGLE inside of LOOP,
instead SELECT all relevated rows before LOOP in intertal tables (using FOR ALL ENTRIES) and then use
READ TABLE WITH KEY BINARY SEARCH.
it will match faster.
for example:
IF NOT lt_vbap[] IS INITIAL.
SELECT vbeln
FROM vbfa
INTO lt_vbill
FOR ALL ENTRIES IN lt_vbap
WHERE vbelv = lt_vbap-vbeln.
ENDIF.
SORT lt_vbap BY vbeln.
READ TABLE lt_vbill WITH KEY vbeln = <wa_vbap>-vbeln
BINARY SEARCH.

Roll back process after certain time limit

Hi All,
I am using Oracle 11g. I am calling one stored procedure (MainProc) from my application. Through this procedure I am calling internally three more procedure (Insert recordProc1, InsertRecordProc2 and DeleteRecProc).
The third stored procedure (DeleteRecProc) is taking more than 5 minutes. But if these process crossings more than 5 minutes, have to stop the process and roll back all three stored procedures functions.
I don’t have any commit statement inside of these stored procedures. But I have EXECUTE IMMEDIATE Inside of stored DeleteRecProc.
Help required: Help me to make a counter / Timer. I have a parameter, which has the assigned time limit. How to check whether the process crossing the time limit? How to stop the process and call Rollback?
Thanks in advance.
Manian

Don't know if this helps your situation.
http://docs.info.apple.com/article.html?artnum=301579
here is the entire thread
http://discussions.apple.com/message.jspa?messageID=1237801#1237801

Error: Max processing time or Max records limit reached

Hi All,
While I run the report in Infoview, I get the below error:
Unable to retrieve object:
Max processing time or Max records limit reached
Kindly suggest me.
Thanks,
Meena

There is a default limit on the number of records returned and on the time out of an 'idle' connection..These could be set in the CMC , however first try to check the query for that report and see if it is applying your record selection criteria at the database level ( use the Show Sql option and see if all your selection criteria have been turned into WHERE clauses)
- this will drastically reduces both the number of records returned to the Crystal and the time it takes for...
You can find setting here:
CMC>servers>page server>properties
Its always not recommended to set it to unlimited as page server is not a robust server, you need to schedule such reports that uses job server which is more robust.
Regards,
Parsa.

Max processing time or Max records limit reached (Crystal Reports Server)

Although my report runs fine from with Crystal Reports (designer), I get an error when I try to run it from the Crystal Reports Server portal.
I get an error u201CMax processing time or Max records limit reachedu201D.
How can I solve this problem?
Iu2019m accessing a DB2 database on an iSeries Server thru ODBC. I know that the report uses a lot of data. Therefore I have set u201Callow query timeout yesu201D within the ODBC data source. The data connection itself is not the problem, I have no problem running other reports on the same connection.
PS. A do not know whether or not this is the right forum for my post. I first posted within "Java Development - BusinessObjects Enterprise, BusinessObjects Edge, Crystal Reports Server" but I did not get any response.

I found the answer to my problem:
1) Log onto the CMC
2) Goto "Servers" in the dropdown menu
3) Expand "Service Categories"
4) Select "Crystal Reports Services
5) In the right window will be listed the currently running services. The 2 services that Dell mentioned are in there under "Description": CrystalReportsProcessingServer and CrystalReports2013ProcessingServer
Hope this helps somebody else.

Query0;Runtime error time limit exceeded,with parallel processing via RFC

Dear experts,
I have created a report on 0cca_c11 cube and while running my report when i give cost center group which contains many cost centers , my report executes for long time and at last gives message
"Error while reading data;navigation is possible" and
"Query0;Runtime error time limit exceeded,with parallel processing via RFC"
please tell me what is the problem and how can i solve this
Regards
Shweta

hI,
Execute the Query in RSRT with Execute and Debug option.
Select SQL statements toknow where exactly it's taking time.
Let us know the details once you done.
Reg
Pra

TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP

Hi gurus,
I Have got an error while executing
The errors are as follows.
1.Time limit exceeded. No return of the split processes
2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
3.Resource error. No batch process available. Process terminated
Note: Iam not executing the DTP as a back ground job.
As it is of higher priority the answers Asap Is appreciated.
Regards
Amar.

Hi,
how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
Additional take a look at table RSBATCHPARALLEL and
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
Regards
Andreas

Time Limit exceeded error in ALV report

I am gettting error "Time Limit Exceeded" when i execute ALV report. Can i run the program in background and how to do that?. I had already optimized my query in the program but even then i am facing the same issue.

You can process the alv in background by pressing F9...I guess that the output would be available as a spool in SP01.
You may need to re-check your query...And also, review the alv catalog and any events you are using....
Greetings,
Blag.

Time Limit exceeded Error while updating huge number of records in MARC

Hi experts,
I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
as we want to update.
Below is the part of code in my proxy
Call the BAPI update the safety stock Value.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata                    = gs_headdata
        CLIENTDATA                  =
        CLIENTDATAX                 =
       plantdata                   = gs_plantdata
       plantdatax                  = gs_plantdatax
       IMPORTING
          return              = ls_return.
    IF ls_return-type <> 'S'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      MOVE ls_return-message TO lv_message.
Populate the error table and process next record.
      CALL METHOD me->populate_error
        EXPORTING
          message = lv_message.
      CONTINUE.
    ENDIF.
Can any one please let me know what could be the best possible approach for this issue.
Thanks in Advance,
Jitender
Hi experts,
I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
as we want to update.
Below is the part of code in my proxy
Call the BAPI update the safety stock Value.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata                    = gs_headdata
        CLIENTDATA                  =
        CLIENTDATAX                 =
       plantdata                   = gs_plantdata
       plantdatax                  = gs_plantdatax
       IMPORTING
          return              = ls_return.
    IF ls_return-type <> 'S'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      MOVE ls_return-message TO lv_message.
Populate the error table and process next record.
      CALL METHOD me->populate_error
        EXPORTING
          message = lv_message.
      CONTINUE.
    ENDIF.
Can any one please let me know what could be the best possible approach for this issue.
Thanks in Advance,
Jitender

Hi Raju,
Use the following routine to get fiscal year/period using calday.
*Data definition:
DATA: l_Arg1 TYPE RSFISCPER ,
      l_Arg2 TYPE RSFO_DATE ,
      l_Arg3 TYPE T009B-PERIV .
*Calculation:
l_Arg2 = TRAN_STRUCTURE-POST_DATE. (<b> This is the date that u have to give</b>)
l_Arg3 = 'V3'.
CALL METHOD CL_RSAR_FUNCTION=>DATE_FISCPER(
EXPORTING I_DATE = l_Arg2
            I_PER = l_Arg3
IMPORTING E_FISCPER = l_Arg1 ).
RESULT = l_Arg1 .
Hope it will sove ur problem....!
Please Assign points.......
Best Regards,
SG

Time Limit Exceeded in File - java- IDOC

Hello,
I have an interface which reads a text file in XI and uses a java mapping to produce IDOCs in an R3 system synchronously, the interface was running fine for more than 2 years . Since the text file is larger than 20 MB, we are splitting into small text files (2mb each) for easier processing. While processing, each file will hold the outbound queue (SMQ2) until it gets completed. after 2 years of using this interface, it started giving errors in the queue (Time Limit Exceeded) for files larger than 1mb.
Any hint ??

Swarup,
increasing the RFC adapter time out from the visual admin has solve the problem,
thank you for that.
but what I was looking for is a way to find out what could be the root cause, since it was running 2 years with (300000 ms time out) without a problem. Now I must increase this time out which mean my system is not performing well!
Agasthuri,
as I mentioned, it was running fine with 2mb, now even 1mb cannot be proccessed,
Thanks again.

PI 7.0: IDOCs struck in IDX5 with error "Time Limit Exceeded".

Hi All,
We have a File to IDOC scenario in PI 7.0. After mapping the IDOCs are posted from PI to ECC System.
On a normal day this interface works good, yesterday we received a huge file which resulted in the creation of about 25000 IDOCs from one single file. The mapping went fine, however the IDOCs created were not posted into ECC System. When we monitor the IDOCs using transaction code IDX5 in PI system, we found the error message as "Time limit exceeded", the user shown was "PIAFUSER". To overcome this error, we increased the time limit of PIAFUSER from default to about 1500 seconds.
Now, I want to push these IDOCs from PI into ECC System. Could you please let us know, how to push these IDOCs sitting in PI system to ECC?
We do not want to reprocess the file from the beginning. Please let us know if it is possible to push the IDOCs without processing the file? If yes, how to reprocess?
Thanks in advance.
Regards,
Manohar Dubbaka.

Hi,
the help documentation is as follows:
Check the tRFC Status
Use
tRFC calls which transfer IDocs use the function module IDOC_INBOUND_ASYNCHRONOUS at reception (before release 4.0: INBOUND_IDOC_PROCESS).
If an IDoc in the sending system has been passed to tRFC (IDoc status "03"), but has not yet been input in the receiving system, this means that the tRFC call has not yet been executed.
Activities
To check the status of the tRFC calls, choose Tools ® IDoc Interface/ALE ® Administration ® Monitoring ® Troubleshooting ® RFC Queue (SM58) and specify any additional selection criteria.
The program RSARFCEX restarts unsuccessful tRFC calls.
You cannot choose the option is being executed in background processing.
Best Regards,
Erik Hubers

Message getting stuck in XBQO queue - Time limit exceeded

Hi All,
We have a BPM scenario in our project (on PI 7.0 SP18), where bundle of PEXR2002 Payment IDocs are received as a single flat file. This file is then consumed by the BPM, to split the message into multiple payments using Java Mapping.
However, when we get an IDoc file of size greater than 5 MB (more than 500 IDocs), the message gets stuck in XBQO queue and eventually giving a SYSFAIL with the message "Time limit exceeded". Could you please let us know if you have encountered a similar issue and are aware of a possible solution.
Any pointers to this will be really appreciated.
Thanks & Regards,
ROSIE SASIDHARAN

H Rosie,
1) Goto SXMB_ADM-> Integration Engine Configuration->Parameter EO_MSG_SIZE_LIMIT->possible values 0 - 2,097,151 (KB)
The parameter EO_MSG_SIZE_LIMIT enables serial processing of messages of a particular size. This applies for messages with the quality of service Exactly Once (EO). If the message is larger than the parameter value, the message is processed in a separate queue.
2) Goto SXMB_ADM-> Integration Engine Configuration->Parameter HTTP_TIMEOUT->possible values n Seconds, where n is a whole number.
The parameter Specifies the timeout for HTTP connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
See SAP Note 335162 for sysfail issue....
Hope these will help u....
Regds,
Pinangshuk.

SMQ2 Time limit exceeded

Hi Experts,
IDOC to IDOC Scenarion--There are some entries in SMQ2 are showing "time limit exceeded". i tried to unlok the Queue every time i get the error and after that queue is going into Running status for some time and again it is giving the same error and status is "SYSFAIL". Queue registration is also done.we are facing this problem in production.
All other interfaces messages are processing fine except for one interface. some IDocs are processed even for the same interface. I assumed that the size of the message is large. so it is not processing, mapping step is not executed.
see the example below for one message which is not processed from XI
<SAP:MessageSizePayload>467228</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>479041</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>467228</SAP:PayloadSizeRequest>
We have restarted the complete XI server after Kernal upgrade and after that we are getting this problem, can any body give me the suggestion how can we solve the problem.

Hi
The size of the messages also not huge, we have tested it testing system and it is taking less than one minute to process the message. And we have checked at the Gate way & JCO connections are working fine. The problem is still there as i explained in my first post.
Every time it is giving time limit exceeded after unlocking the Queue.
Is there any other suggestions to resolve this issue.
Thanks in Advance
Neeru
Edited by: neeru on Mar 3, 2010 2:57 PM

Time limit exceeded in inbound qRfc

Hi all!
Please I need your help with this timeout issue. I have the following scenario:
FTP --> XI (Java mapping) --> R3 (Idoc)
Where from that Java mapping I do some RFC's to R3 in order to make conversions and validations.
When I test this interface in development environment with a 1Mb flat file, it took 5 minutes to process. However, i did the same test in QA environment, it took pretty much more than 5 minutes and I got this "time limit exceeded" in the qRfc inbound queue (sxmb_moni t-code).
I was told that the hardware beneath development and QA are different but theorically, the later should be faster.
Anyone has any suggestion to resolve this? I will really appreciate it.
Best regards!
Vanesa.

Hi,
have a look on this doc called "HowTou2026 Investigate Timeouts in Synchronous XI/PI Scenario"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
You will certainly find your answer.
Regards.
Mickael

Program terminated: Time limit exceeded, ABAP performance, max_wprun_time

Hi,
I am running an ABAP program, and I get the following short dump:
Time limit exceeded. The program has exceeded the maximum permitted runtime and has therefore been terminated. After a certain time, the program terminates to free the work processfor other users who are waiting. This is to stop work processes being blocked for too long by
- Endless loops (DO, WHILE, ...),
- Database acceses with large result sets,
- Database accesses without an apporpriate index (full table scan)
- database accesses producing an excessively large result set,
The maximum runtime of a program is set by the profile parameter "rdisp/max_wprun_time". The current setting is 10000 seconds. After this, the system gives the program a second chance. During the first half (>= 10000 seconds), a call that is blocking the work process (such as a long-running SQLstatement) can occur. While the statement is being processed, the database layer will not allow it to be interrupted. However, to stop the program terminating immediately after the statement has been successfully processed, the system gives it another 10000 seconds. Hence the maximum runtime of a program is at least twice the value of the system profile parameter "rdisp/max_wprun_time".
Last error logged in SAP kernel
Component............ "NI (network interface)"
Place................ "SAP-Dispatcher ok1a11cs_P06_00 on host ok1a11e0"
Version.............. 34
Error code........... "-6"
Error text........... "connection to partner broken"
Description.......... "NiPRead"
System call.......... "recv"
Module............... "niuxi.c"
Line................. 1186
Long-running programs should be started as background jobs. If this is not possible, you can increase the value of the system profile parameter "rdisp/max_wprun_time".
Program cannot be started as a background job. We have now identified two options to solve the problem:
- Increase the value of the system profile parameter "rdisp/max_wprun_time"
- Improve the performance of the following SELECT statement in the program:
SELECT ps_psp_pnr ebeln ebelp zekkn sakto FROM ekkn
INTO CORRESPONDING FIELDS OF TABLE i_ekkn
FOR ALL ENTRIES IN p_lt_proj
WHERE ps_psp_pnr = p_lt_proj-pspnr
AND ps_psp_pnr > 0.
In EKKN we have 200 000 entries.
Is there any other options we could try?
Regards,
Jarmo

Thanks for your help, this problem seems to be quite challenging...
In EKKN we have 200 000 entries. 199 999 entries have value of 00000000 in column ps_psp_pnr, and only one has a value which identifies a WBS element.
I believe the problem is that there isn't any WBS element in PRPS which has the value of 00000000. I guess that is the reason why EKKN is read sequantially.
I also tried this one, but it doesn't help at all. Before the SELECT statement is executed, there are 594 entries in internal table p_lt_proj_sel:
DATA p_lt_proj_sel LIKE p_lt_proj OCCURS 0 WITH HEADER LINE.
p_lt_proj_sel[] = p_lt_proj[].
DELETE p_lt_proj_sel WHERE pspnr = 0.
SORT p_lt_proj_sel by pspnr.
SELECT ps_psp_pnr ebeln ebelp zekkn sakto FROM ekkn
INTO CORRESPONDING FIELDS OF TABLE i_ekkn
FOR ALL ENTRIES IN p_lt_proj_sel
WHERE ps_psp_pnr = p_lt_proj_sel-pspnr.
I also checked that the index P in EKKN is active.
Can I somehow force the optimizer to use the index?
Regards,
Jarmo

On demand process time limit.

Similar Messages

Maybe you are looking for