Oracle Linux-SNA Protocol support

Hello,
We have developed the product with client server architecture with client and server has capability to talk with each other
using either TCP/IP or IBM SNA protocol. Our application is an 32 bit application.
We now need to check whether the Oracle Linux has capability to support SNA protocol.
Can you please let us know whether the following the Oracle linux versions (*Oracle 5 64-bit, Oracle 5 32-bit, Oracle 6 64-bit, Oracle 6 32-bit*) has capability to support SNA protocol?
Thanks in advance.
Regards,
Dayakar
Edited by: user618976 on Nov 14, 2011 1:37 AM

user618976 wrote:
Do we have any document/reference stating the Oracle Linux does not provide SNA protocol support?I have not see the converse - any documentation from Oracle that Oracle Linux (OL) does support SNA. There are no specific SNA download components for OL at Oracle's edelivery site, and not Metalink/Support note found on this subject matter when searching for "Linux" and "SNA protocol".
Oracle itself do (or did) support Gateway products using SNA. From the few support notes on the topic, it seems that these are pretty old and refer to deprecated s/w.
I would be surprised if OL supports SNA. Or even IPX for that matter. IPv4 and IPV6 are the definitive standards. For fabric layers, there are the various Infiniband protocols (SRP, RDMA, RDS, etc). It's hard to see SNA or something like IPX featuring in this.
Best would be to ask this question to Oracle sales/marketing directly. Neither Dude or I work for Oracle and we've only conveyed our opinions in this regard.

Similar Messages

Oracle Linux HCL. Support of Intel Core i3 and H55 chipset

Dear Colleagues.
I'm going to purchase the new desktop for home use and the question which bothers me is the compatiblity of new hardware system with Oracle Linux 5.6.
The system platform supposed to be purchased consists of "Intel Core i3-560" CPU, "ASUS P7H55D-M EVO" motherboard, 4Gb DDR3 1333 MHz and other components. No descrete graphical card is supposed to be purchased since CPU integrated graphical card will be used.
The questions are:
Did somebody installed Intel Core + H55 chipset motherboards?
Was that successfull?
Do you have some hints, good notices regarding Linux installation on such system?
The OS version planned to be installed is ORacle Linux 5.6.
Thank you for your time and assistance!
Best Regards,
Ilya.

Tommy and Dude,
The main reasons of installing Oracle Linux are:
1) Learning administering Oracle Database installed on Linux systems environment.
2) Oracle Linux is supported by Oracle Database 10g.
3) It is free.
There were not much alternatives to choose from. Below you can see the list of supported OSes by Oracle Database 10g:
Asianux 1,2,3. <-- Never heard of this OS before.
Oracle Linux 4,5 <-- My choice. It is free and it uses stable Red Hat kernel (2.6.18 for Oracle Linux 5, 2.6.32 for Oracle Unbreakable Linux.; by the way, i read in some internet article that Linux kernel 2.6.32 contains some code for supporting Intel Core processors (at least theirs old versions which use socket LGA1156), but probably it is not completely right information).
Red Hat Enterprise Linux 4, 5 <-- they are not free of charge.
SUSE Linux Enterprise Server 9 SP2 or later, 10, 11 <-- Seems like they are not free of charge either. 60 days trial is not good option for me.
Oracle VM <-- Probably, it is also a good choice. I'll study this option.Unfortunately, both Ubuntu and Fedora are not in the list and Windows is no good choice for me since Oracle Database is different in the administration under UNIX and Windows environment.
I've got questions regarding the use of VirtualBox and other VM software:
- Would i have the ability to install, run and administer Oracle Database 10g within VirtualBox?
- Is there much differences in administering Oracle Database under real standalone OS and under VM software (VirtlBox, for instance)?
Thank you very much for participation and usefull suggestions!
Best Regards,
Ilya.

SNA / 3270 support

Hi Folks,
Does anyone know of a package that will run under 10.4.6 to support an SNA connection to a mainframe using 3270 terminal mode. I found one package but it runs under a combination of Clasic and 10.4
Any help would be appreciated.
Thanks.
PowerBook Mac OS X (10.4.6)

user618976 wrote:
Do we have any document/reference stating the Oracle Linux does not provide SNA protocol support?I have not see the converse - any documentation from Oracle that Oracle Linux (OL) does support SNA. There are no specific SNA download components for OL at Oracle's edelivery site, and not Metalink/Support note found on this subject matter when searching for "Linux" and "SNA protocol".
Oracle itself do (or did) support Gateway products using SNA. From the few support notes on the topic, it seems that these are pretty old and refer to deprecated s/w.
I would be surprised if OL supports SNA. Or even IPX for that matter. IPv4 and IPV6 are the definitive standards. For fabric layers, there are the various Infiniband protocols (SRP, RDMA, RDS, etc). It's hard to see SNA or something like IPX featuring in this.
Best would be to ask this question to Oracle sales/marketing directly. Neither Dude or I work for Oracle and we've only conveyed our opinions in this regard.

Memory hot plug supported in Oracle linux 6.0 ?

hi,
I am testing Oracle Linux 6.0 on a vm, I tried to hot add memory, but i noticed that the respective modules like acpiphp and acpi_memhotplug not present.
Also i got the below information from the site, http://blogs.oracle.com/wim/2010/10/playing_with_sr_iov_in_oracle.html
"----------To enable pci hotplug in the guest, please do the following :
in the guest you have to load both pciehp and acpiphp
you can do this easily by doing :
**echo "modprobe pciehp" >> /etc/rc.modules
echo "modprobe acpiphp" >> /etc/rc.modules
chmod 755 /etc/rc.modules**
note - this is for testing purposes only. We do not currently have official support in the product for this.--------".
I tried doing the above mentioned procedure, then also the mem-hot plug is not working.
So I feel mem-hot plug is not supported.
Can any oone confirm me about this.
Edited by: 817795 on Feb 17, 2011 3:07 AM
Edited by: 817795 on Feb 17, 2011 3:07 AM

Not apparently.
$ fgrep HOTPLUG /lib/modules/$(uname -r)/build/.config
CONFIG_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=mNote that CONFIG_MEMORY_HOTPLUG being not set is the same has having the kernel feature disabled.

Does weblogic server 10.3.6 & 10.3.5 supported on oracle linux 5.8 ?

I am trying to install weblogic server 10.3.6 on Oracle linux 5.8 (64-bit) platform. While creating domain , it does not take any input in password & conform password fields on "configure administrator username and password page". The field remains blank. I am stuck at this point and not able to create domain. The same issue is with weblogic 10.3.5 server. The java i used is jdk1.7 update 3 and jdk 1.6 update 27. In Both the cases i am not to create domain.
Can anyone of you tell me if weblogic 10.3.6 is supported on Oracle linux 5.8 platform. If it is supported any idea how to resolve this issue?
Thanks in advance,
Padma

Yes. Please refer
System Requirements and Supported Platforms for Oracle WebLogic Server 10.3 ( xls)
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html

Oracle Linux as Guest OS in Oracle VM (which all kernel are supported.)

Hi,
currently Oracle packages two different kernels with Oracle Linux (Redhat compatible kernel and UEK). so when running Oracle Linux as guest on Oracle VM server which are the kernel are supported???
Thanks,
Inbaraj

Thanks for your reply... i understand that Oracle kernel is better than Red Hat compatible kernel, but RHCK is still bundled with OL , that's where my question started whether RHCK is supported as guest in OVM?

Oracle Linux support subscription. for Oracle employees

I am using RHEL 5 but could not find wireshark trace and I beleive that you need to have Oracle Linux support subscription to access yum repositories. How an Oracle employee can update the software?

Here is a previous link that could be interesting to you:
Re: Employee Access to ULN or Public Yum?
You can also install wireshark and dependend packages using oracle public yum by following the instructions on
http://public-yum.oracle.com/
# yum install wireshark
# yum install wireshark-gnome

Does Oracle Linux Server-uek Kernel support KVM? (OL6)

Hi,
I've installed Oracle Linux 6. Does it support kvm? How do i check if module kvm is running? modprobe kvm does not show me anything, neither in /var/log/messages or dmesg.
Regards
Ricardo

Just boot with the base kernel... instead of unbreakable enterprise kernel. after that if you modprobe kvm the check dmesg and you'll see something like this:
kvm: 4864: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079
Joao

Oracle Protocol support info required

Hi,
I’m using Oracle 10g r2,on windows ,my question is Oracle supports following protocol on windows environment.
TCP
TCPS
IPC
NMP
If yes then how I can change my current TCP protocol in my Oracle.
Thanks
Faheem

Hi,
I’m using Oracle 10g r2,on windows ,my question is
Oracle supports following protocol on windows
environment.
TCP
TCPS
IPC
NMP
If yes then how I can change my current TCP protocol
in my Oracle.
Thanks
FaheemOracle supports many, many protocols. You are specifically asking for Networking protocols. Perhaps unsurprising, then, that the question is one about the Oracle Net Services.
The answer is in the Net Services Administrator's Guide and the Net Services Reference documents found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3#index-NET In particular, look at Chapter 4 of the Reference.
There is additional information in the Oracle® Database Platform Guide, 10g Release 2 (10.2) for Microsoft Windows (32-Bit) as well.

[Comm] LinuxCertified announces support for Oracle Linux on its laptops

Hello,
LinuxCertified is pleased to announce that its Linux laptops are now available with Oracle Enterprise Linux 4 Update 4 pre-installed.
For more details, please visit: http://www.linuxcertified.com/
Thanks
LinuxCertified Team
-

user6029797 wrote:
•oracleasmlib-2.0.4-1.el5.x86_64.rpm -- I need this oneThis requires Oracle Linux support, as it is not GPL software and is only available to subscribers.
•oracleasm-2.6.18-164.el5-2.0.5-1.el5.x86_64.rpm -- I need this oneNo, you don't. This is built into the kernel for OL6U1.
Or does it mean that I must pay Oracle in order to be able to get these packages in order to learn ASM at home ??
Why would Oracle allow us to use their RDBMS/RAC/ASM/Linux software at home learning for free and not supply the above two packages??If you want to use ASM for free, install Oracle Linux 5 Update 7 and download the RHEL5 oracleasmlib package from here:
http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html
Keep in mind that Database is NOT certified on Oracle Linux 6 anyway, so it is challenging to install. The very article you link to uses Oracle Linux 5. It also links to these very same RPMs. If you follow the article more carefully, you won't have any issues.

Oracle Linux CURL support?

How do you get CURL to work with Oracle Linux?
I can't find php5-curl or php-curl in the Repository?

981499 wrote:
How do you get CURL to work with Oracle Linux?
I can't find php5-curl or php-curl in the Repository?You mean, how do you get cURL to work with PHP on Oracle Linux. If you just want cURL, install it:
# yum install curlIf you are actually talking about cURL, the default php package in OL6 includes cURL support without any additional RPMs:
$ php -i | grep cURL
cURL support => enabled
cURL Information => 7.19.7

Oracle 8i - no protocal support shown

I am currently installing Oracle8i on RedHat Linux 6.1. Within the Universal Installer, a page is shown for "Oracle Protocol Support" with a box showing the protocols supported by my Linux box. However, there is nothing listed. Are there special RPMs that I have to install for this native protocol software? For my Linux installation, I chose the easy path and did a "KDE Workstation" installation that the RedHat installer offers. I would have thought this includes the necessary network protocol software....

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Kathryn Gomm ([email protected]):
I am currently installing Oracle8i on RedHat Linux 6.1. Within the Universal Installer, a page is shown for "Oracle Protocol Support" with a box showing the protocols supported by my Linux box. However, there is nothing listed. Are there special RPMs that I have to install for this native protocol software? For my Linux installation, I chose the easy path and did a "KDE Workstation" installation that the RedHat installer offers. I would have thought this includes the necessary network protocol software....<HR></BLOCKQUOTE>
Ignore the empty list. It works fine. Once you run dbassist it will configure the listner with IPC and tcp connections for the instance. Haven't tried a second instance yet, but assume it will correctly change the listener.ora file..
--kamie
null

Installing Oracle Linux 5.8 on Virtual Box

I'm trying to install Oracle Linux 5.8 on Virtual Box. I have downloaded V31120-01 and burned to the DVD, I think successfully.
However, when I start the Virtual machine, I get the Opening screen, "Oracle Linux" the little picture of the penguin guy, etc, so I think my DVD is good.
The screen says, "To install or upgrade in graphical mode, press the <enter> key." So I do.
Several lines of text flow across the screen, but then the process seems to stop with no prompt on what to do next or any indication that an error has occurred, it just stops.
The last lines I can see are:
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 5 devices
usbcore: registered new driver usbfs
usbcore: registerd new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try 'pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPS0v4
NetLabel: unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMC northbridge found.
NET: Registered protocol family 2
I'm not sure if it's waiting for some input from me, or if there is a problem, but nothing happens beyond this point until I power down the virtual machine.

There is no need to burn a DVD because Virtualbox can directly mount and boot from the .iso image you downloaded. It is usually a good idea to check the md5 checksum of your download with the number provided by the download page to verify your download is not corrupted. There are no problems installing any version of Oracle Linux under Virtualbox provided you have the right hardware. I suggest to check the Virtualbox documentation.
Note: This is not a Virtualbox forum.

Oracle RAC Failover (CTF) support

hi! every developers.
I am running Portal 6.0
In the WAS6.40 JDBC configuration,
Is this JDBC driver THIN?
and Is this connection String effective on failover (CTF) with Oracle RAC?
below is our current configration for reference.
Connection conn =
DriverManager.getConnection("jdbc:oracle:thin:@(DESCRIPTION =
(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = *.*.*.11) (PORT = 1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = *.*.*.12) (PORT = 1521))) (CONNECT_DATA =
(SERVICE_NAME = HIDB))) ", "scott", "tiger");
Does anything to need in my configuration WAS6.40?
thanks in advance.

Considering Oracle wrote DIF/DIX support for Linux, yes it does. It requires the use of ASMlib as well.
See Preventing Silent Data Corruption in Oracle Linux for more information.

My IBM blade server Lost all the Interfaces its running oracle linux 6.3

Hi am moses i installed oracle linux on ibm blade server and installed the ethernet, iscsi and fcoe drivers and it worked fine. but after there was an electrical blackout my oracle Linux server lost all
the eth* interfaces. Please assist on what to do because it contains installed application and we don't need to format it.

The out put for dmesg is this:
io scheduler cfq registered
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:02.2: setting latency timer to 64
pcieport 0000:00:02.2: irq 67 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 68 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
pcieport 0000:00:11.0: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 70 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:16:00.0: Signaling PME through PCIe PME interrupt
pci 0000:16:00.1: Signaling PME through PCIe PME interrupt
pci 0000:16:00.2: Signaling PME through PCIe PME interrupt
pci 0000:16:00.3: Signaling PME through PCIe PME interrupt
pci 0000:16:00.4: Signaling PME through PCIe PME interrupt
pci 0000:16:00.5: Signaling PME through PCIe PME interrupt
pci 0000:16:00.6: Signaling PME through PCIe PME interrupt
pci 0000:16:00.7: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcieport 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
efifb: probing for efifb
efifb: framebuffer at 0x90000000, mapped to 0xffffc90027900000, using 6144k, total 16384k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7ed3b038/3/0]
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0x92301000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.39-200.24.1.el6uek.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0x92300000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.39-200.24.1.el6uek.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
Refined TSC clocksource calibration: 1999.993 MHz.
Switching to clocksource tsc
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new high speed USB device number 3 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=04b4, idProduct=6560
usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 2 ports detected
usb 2-1.1: new high speed USB device number 3 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=ffff, idProduct=0248
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Gadget USB HUB
usb 2-1.1: Manufacturer: no manufacturer
usb 2-1.1: SerialNumber: 0123456789
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 6 ports detected
usb 2-1.3: new full speed USB device number 4 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=04b3, idProduct=4002
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: IBM MM2
usb 2-1.3: Manufacturer: IBM
usb 2-1.3: SerialNumber: 0000003012214
usb 1-1.2.2: new high speed USB device number 4 using ehci_hcd
usb 1-1.2.2: New USB device found, idVendor=04b4, idProduct=6560
usb 1-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.2.2:1.0: USB hub found
hub 1-1.2.2:1.0: 4 ports detected
usb 2-1.1.5: new high speed USB device number 5 using ehci_hcd
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
usb 1-1.2.2.3: new high speed USB device number 5 using ehci_hcd
usb 1-1.2.2.3: New USB device found, idVendor=0928, idProduct=0007
usb 1-1.2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.3: Product: Mass Storage Plus
usb 1-1.2.2.3: Manufacturer: OEM
usb 1-1.2.2.3: SerialNumber: R8RQ6GKC900D1Z
usb 2-1.1.5: USB disconnect, device number 5
usb 2-1.1.5: new high speed USB device number 6 using ehci_hcd
input: IBM IBM MM2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input1
generic-usb 0003:04B3:4002.0001: input,hidraw0: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:00:1d.0-1.3/input0
input: IBM IBM MM2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input2
generic-usb 0003:04B3:4002.0002: input,hidraw1: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:00:1d.0-1.3/input1
input: OEM Mass Storage Plus as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2.3/1-1.2.2.3:1.1/input/input3
generic-usb 0003:0928:0007.0003: input,hidraw2: USB HID v1.11 Device [OEM Mass Storage Plus] on usb-0000:00:1a.0-1.2.2.3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:03: setting system clock to 2013-09-03 14:54:17 UTC (1378220057)
Initializing network drop monitor service
Freeing unused kernel memory: 1508k freed
dracut: dracut-004-283.0.1.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
udev: starting version 147
udevd (141): /proc/141/oom_adj is deprecated, please use /proc/141/oom_score_adj instead.
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
mpt2sas version 13.100.00.00 loaded
scsi0 : Fusion MPT SAS Host
mpt2sas 0000:0c:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mpt2sas 0000:0c:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (41134540 kB)
mpt2sas 0000:0c:00.0: irq 71 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 71
mpt2sas0: iomem(0x0000000092240000), mapped(0xffffc900100d8000), size(16384)
mpt2sas0: ioport(0x0000000000002000), size(256)
mpt2sas0: Allocated physical memory: size(4219 kB)
mpt2sas0: Current Controller Queue Depth(1865), Max Controller Queue Depth(2040)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2004: FWVersion(10.00.08.00), ChipRevision(0x03), BiosVersion(07.18.04.02)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
Emulex LightPulse Fibre Channel SCSI driver 8.3.5.68.6p
Copyright(c) 2004-2011 Emulex. All rights reserved.
lpfc 0000:16:00.2: enabling device (0040 -> 0042)
lpfc 0000:16:00.2: PCI INT C -> GSI 36 (level, low) -> IRQ 36
lpfc 0000:16:00.2: setting latency timer to 64
lpfc 0000:16:00.2: 0:1408 Port Failed POST - portsmphr=0x80000400, perr=x1, sfi=x0, nip=x0, ipc=x0, scr1=x0, scr2=x0, hscratch=x0, pstatus=x400
lpfc 0000:16:00.2: 0:1412 Failed to set up driver resource.
lpfc 0000:16:00.2: PCI INT C disabled
lpfc 0000:16:00.3: enabling device (0040 -> 0042)
lpfc 0000:16:00.3: PCI INT D -> GSI 38 (level, low) -> IRQ 38
lpfc 0000:16:00.3: setting latency timer to 64
lpfc 0000:16:00.3: 0:1408 Port Failed POST - portsmphr=0x80000400, perr=x1, sfi=x0, nip=x0, ipc=x0, scr1=x0, scr2=x0, hscratch=x0, pstatus=x400
lpfc 0000:16:00.3: 0:1412 Failed to set up driver resource.
lpfc 0000:16:00.3: PCI INT D disabled
Initializing USB Mass Storage driver...
scsi1 : usb-storage 1-1.2.2.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi: waiting for bus probes to complete ...
scsi 1:0:0:0: CD-ROM            IBM SATA DEVICE 81Y3658 IB01 PQ: 0 ANSI: 0
mpt2sas0: host_add: handle(0x0001), sas_addr(0x500507604d0112dc), phys(4)
mpt2sas0: port enable: SUCCESS
scsi 0:1:0:0: Direct-Access     LSI      Logical Volume   3000 PQ: 0 ANSI: 6
scsi 0:1:0:0: RAID1: handle(0x00b5), wwid(0x098d6d2781629507), pd_count(2), type(SSP)
scsi 0:1:0:0: qdepth(128), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:0:0: Direct-Access     IBM-ESXS MK1401GRRB       SC27 PQ: 0 ANSI: 6
scsi 0:0:0:0: SSP: handle(0x0005), sas_addr(0x5000039428005452), phy(0), device_name(0x5000039428005451)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x500507604d0112dc), slot(0)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:1:0: Direct-Access     IBM-ESXS MK1401GRRB       SC27 PQ: 0 ANSI: 6
scsi 0:0:1:0: SSP: handle(0x0006), sas_addr(0x500003942802c216), phy(1), device_name(0x500003942802c215)
scsi 0:0:1:0: SSP: enclosure_logical_id(0x500507604d0112dc), slot(1)
scsi 0:0:1:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 0:1:0:0: [sda] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 0:1:0:0: [sda] Write Protect is off
sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sd 0:1:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda3 for LVM logical volumes vg_sspaswl11g3/lv_root vg_sspaswl11g3/lv_swap
dracut: inactive '/dev/vg_sspaswl11g3/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_home' [15.00 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_swap' [19.68 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_oracle' [50.00 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/vg_sspaswl11g3-lv_root
dracut: Loading SELinux policy
type=1404 audit(1378220065.747:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 250819 rules.
SELinux: 2048 avtab hash slots, 250819 rules.
SELinux: 9 users, 12 roles, 3762 types, 187 bools, 1 sens, 1024 cats
SELinux: 81 classes, 250819 rules
SELinux: Permission audit_access in class file not defined in policy.
SELinux: Permission audit_access in class dir not defined in policy.
SELinux: Permission execmod in class dir not defined in policy.
SELinux: Permission audit_access in class lnk_file not defined in policy.
SELinux: Permission open in class lnk_file not defined in policy.
SELinux: Permission execmod in class lnk_file not defined in policy.
SELinux: Permission audit_access in class chr_file not defined in policy.
SELinux: Permission audit_access in class blk_file not defined in policy.
SELinux: Permission execmod in class blk_file not defined in policy.
SELinux: Permission audit_access in class sock_file not defined in policy.
SELinux: Permission execmod in class sock_file not defined in policy.
SELinux: Permission audit_access in class fifo_file not defined in policy.
SELinux: Permission execmod in class fifo_file not defined in policy.
SELinux: Permission syslog in class capability2 not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev dm-0, type ext4), uses xattr
type=1403 audit(1378220066.125:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
be2net 0000:16:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
be2net 0000:16:00.0: setting latency timer to 64
be2net 0000:16:00.0: POST error; stage=0x400
be2net 0000:16:00.0: PCI INT A disabled
be2net 0000:16:00.0: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.0 failed with error -1
be2net 0000:16:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
be2net 0000:16:00.1: setting latency timer to 64
be2net 0000:16:00.1: POST error; stage=0x400
be2net 0000:16:00.1: PCI INT B disabled
be2net 0000:16:00.1: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.1 failed with error -1
be2net 0000:16:00.4: PCI INT A -> GSI 34 (level, low) -> IRQ 34
be2net 0000:16:00.4: setting latency timer to 64
be2net 0000:16:00.4: POST error; stage=0x400
be2net 0000:16:00.4: PCI INT A disabled
be2net 0000:16:00.4: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.4 failed with error -1
be2net 0000:16:00.5: PCI INT B -> GSI 37 (level, low) -> IRQ 37
be2net 0000:16:00.5: setting latency timer to 64
be2net 0000:16:00.5: POST error; stage=0x400
be2net 0000:16:00.5: PCI INT B disabled
be2net 0000:16:00.5: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.5 failed with error -1
be2net 0000:16:00.6: PCI INT C -> GSI 36 (level, low) -> IRQ 36
be2net 0000:16:00.6: setting latency timer to 64
be2net 0000:16:00.6: POST error; stage=0x400
be2net 0000:16:00.6: PCI INT C disabled
be2net 0000:16:00.6: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.6 failed with error -1
be2net 0000:16:00.7: PCI INT D -> GSI 38 (level, low) -> IRQ 38
be2net 0000:16:00.7: setting latency timer to 64
be2net 0000:16:00.7: POST error; stage=0x400
be2net 0000:16:00.7: PCI INT D disabled
be2net 0000:16:00.7: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.7 failed with error -1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
cdc_ether 2-1.1.5:1.0: usb0: register 'cdc_ether' at usb-0000:00:1d.0-1.1.5, CDC Ethernet Device, 36:40:b5:d1:00:67
usbcore: registered new interface driver cdc_ether
sd 0:1:0:0: Attached scsi generic sg0 type 0
scsi 0:0:0:0: Attached scsi generic sg1 type 0
scsi 0:0:1:0: Attached scsi generic sg2 type 0
sr 1:0:0:0: Attached scsi generic sg3 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input4
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70b
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-2, type ext4), uses xattr
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-3, type ext4), uses xattr
Adding 20635644k swap on /dev/mapper/vg_sspaswl11g3-lv_swap. Priority:-1 extents:1 across:20635644k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
NET: Registered protocol family 10
iscsi: registered transport (iser)
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
usb0: no IPv6 routers present
802.1Q VLAN Support v1.8
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.10 (Jan 22, 2011)
TARGET_CORE[0]: Loading Generic Kernel Storage Engine: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.39-200.24.1.el6uek.x86_64
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
TARGET_CORE[0]: Initialized ConfigFS Fabric Infrastructure: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.39-200.24.1.el6uek.x86_64
TCM: Registered subsystem plugin: rd_dr struct module:           (null)
TCM: Registered subsystem plugin: rd_mcp struct module:           (null)
CORE_HBA[0] - TCM Ramdisk HBA Driver v4.0 on Generic Target Core Stack v4.0.0-rc7-ml
CORE_HBA[0] - Attached Ramdisk HBA: 0 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024
CORE_HBA[0] - Attached HBA to Generic Target Core
RAMDISK: Referencing Page Count: 8
CORE_RD[0] - Built Ramdisk Device ID: 0 space of 8 pages in 1 tables
rd_dr: Using SPC_PASSTHROUGH, no reservation emulation
rd_dr: Using SPC_ALUA_PASSTHROUGH, no ALUA emulation
Vendor: LIO-ORG   Model: RAMDISK-DR        Revision: 4.0
Type:   Direct-Access                      ANSI SCSI revision: 05
CORE_RD[0] - Added TCM DIRECT Ramdisk Device ID: 0 of 8 pages in 1 tables, 32768 total bytes
TCM: Registered subsystem plugin: pscsi struct module: ffffffffa056ece0
TCM: Registered subsystem plugin: fileio struct module: ffffffffa0575700
TCM: Registered subsystem plugin: iblock struct module: ffffffffa057a740
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
fuse init (API version 7.16)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
usb 1-1.2.2.1: new high speed USB device number 6 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Mass Storage
usb 1-1.2.2.1: Manufacturer: Generic
usb 1-1.2.2.1: SerialNumber: 68204C70
scsi2 : usb-storage 1-1.2.2.1:1.0
scsi 2:0:0:0: Direct-Access     Generic Flash Disk       8.07 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg4 type 0
sd 2:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
udev: starting version 147
udev: starting version 147
udev: starting version 147
udev: starting version 147
usb0: no IPv6 routers present
usb 1-1.2.2.1: USB disconnect, device number 6
usb 1-1.2.2.1: new high speed USB device number 7 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Mass Storage
usb 1-1.2.2.1: Manufacturer: Generic
usb 1-1.2.2.1: SerialNumber: 68204C70
scsi3 : usb-storage 1-1.2.2.1:1.0
scsi 3:0:0:0: Direct-Access     Generic Flash Disk       8.07 PQ: 0 ANSI: 2
sd 3:0:0:0: Attached scsi generic sg4 type 0
sd 3:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 1-1.2.2.1: USB disconnect, device number 7
usb 1-1.2.2.1: new high speed USB device number 8 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=1e3d, idProduct=2093
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Flash Disk
usb 1-1.2.2.1: Manufacturer: USB 2.0
usb 1-1.2.2.1: SerialNumber: 0719440042B25701
scsi4 : usb-storage 1-1.2.2.1:1.0
scsi 4:0:0:0: Direct-Access     USB 2.0 Flash Disk       5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
[root@sspaswl11g3 Desktop]#

Oracle Linux-SNA Protocol support

Similar Messages

Maybe you are looking for