Order Date should not be modifiable by the user

Hi,
I want  to do ordered date is don't modifiable by the user when they selected  order type in Order Management Super User Responsibility ,Please help me  If anybody done earlier I am not aware of form
personalization .
Thanks&Regards,
Mannala Krishna.

Hi Nagesh
Thanks for your replay,
I had done this through form personalization and moved into Prod it is working fine
Thanks,
Krishna Mannala

Similar Messages

  • Proposed delivery date should not get copied to the target document

    Hi gurus,
    I am creating a quotation and it is taking proposed delivery date as creation date and confirming a schedule line. When i create the sales order the same data is coped to the sale order. I have a different delivery date in sales order , but the system dose not allow me to change the date saying that a schedule line already confirmed for this line item.
    I have unticked the copy schedule line the copay control of item category from quotation to order. still the same problem...pls help

    Hi,
    If you carefully look at the problem, the root cause is not at the schedule line but at the document header where the delivery date is given.
    So if you really dont want the delivery date to be copied, you should do that in a new copying routine and in that routine, you should copy all the details except the delivery date. This means that even if you create with reference, system will ask you for requested delivery date. Now you can give the delivery date of your choice and further scheduling will happen automatically.

  • Order QTY should not exceed than reference document

    Dear Gurus,
    I am creating a Release order with reference to Contract. Ex. order qty is 100 in Contract, while doing sale order it should not allow to change the order qty more than 100 [not more than Ref. document qty]. I have tried in VTAA, completion rule.. but it still allows.
    Pls thro some light on this.
    Regards
    Praveen...

    Hi Sreebha,
    DO NOT COPY PASTE OTHERS STATEMENT
    Check the below link from where it is copied:[Lock Quotation Changes when Sales Order is already Created;
    Regards,
    Amitesh Anand

  • System should not allow to do the changes in PO once the ID created.

    Hi All,
    Once the Inbound Delivery is Created based on the Purchse Order, System should not allow to do the changes in the Purchase Order like Deletion of Item, etc..
    Any Configuration Changes is avaliable. ?
    Regards,
    Sudhakar

    Dear,
    Please check the staus in order
    Current order status xxxx does not allow goods receipt (Message no. C6009)? is this the message?
    This will not allow you to do GR for production order when you activate status profile "SAT1" in the production order. After that when you confirm order it will automatically assign next user status i.e. "SAT2" (if not assign it manually in CO02) it will allow you to do GR for that production order.
    Regards,
    R.Brahmankar

  • AR Invoice date should not be less than delivery date

    How can i make an alert for user when they will prepare AR Invoice?
    Example:
    If Delivery date is 01-10-2010 and Invoice date should be later or same but not less than delivery date(01-10-2010).
    if Invoice date is less than delivery date then This data should not be added into the database.
    So there is any way to stop this error.
    Thanks
    Mizan

    Dear Bala,
    Here is the SP:
    set ANSI_NULLS ON
    set QUOTED_IDENTIFIER ON
    go
    ALTER proc [dbo].[SBO_SP_PostTransactionNotice]
    @object_type nvarchar(20),                     -- SBO Object Type
    @transaction_type nchar(1),               -- [A]dd, <u>pdate, [D]elete, [C]ancel, C[L]ose
    @num_of_cols_in_key int,
    @list_of_key_cols_tab_del nvarchar(255),
    @list_of_cols_val_tab_del nvarchar(255)
    AS
    begin
    -- Return values
    declare @error  int                    -- Result (0 for no error)
    declare @error_message nvarchar (200)           -- Error string to be displayed
    select @error = 0
    select @error_message = N'Ok'
    --     ADD     YOUR     CODE     HERE
    If @object_type='13' and @transaction_type='A'
    BEGIN
    If Exists (Select distinct 'error' from [dbo].[OINV] T0 Inner Join INV1 T1
    On T0.DocEntry=T1.DocEntry Inner Join DLN1 T2 On T1.BaseEntry=T2.DocEntry
    Where T0.DocDate<T2.DocDate
    And T0.DocEntry = @list_of_cols_val_tab_del)
    BEGIN
    Select @error = -1,
    @error_message = 'DocDate for Invoice Should not be Less than Del. Date. So You can not Add this Doc'
    End
    End
    -- Select the return values
    select  @error,@error_message
    end
    Regards,
    Mizan

  • ADF table: How to find out which rows were modified by the user

    Hi,
    I am using ADF table to display data that can be modified by the user (ReadOnly = false in the input text). I need to find out which rows were modified by the user, and only update (persist) those rows in the database.
    Is there an easy way to find out which rows were modified by the user.
    I am NOT particularly concerned with which columns were modified as I would update the entire row (if any data in that row is modified).
    I am using Oracle JDeveloper version 11.1.1.3.
    Thanks,
    Ash K

    Thanks Timo.
    I am using ADF Data Control (which are created from Web Service proxy) to display/update the data.
    In the backing bean, the operation that is invoked at the time persisting data is as follows:
    public void commitOperation {
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding = bindings.getOperationBinding("operationA");
    DCIteratorBinding dciter = (DCIteratorBinding)bindings.get("someIterator");
    for(int i=0; i<dciter.getViewObject().getEstimatedRowCount(); i++)
    Row row=dciter.getRowAtRangeIndex(i);
    SomeObject someObject= new SomeObject ();
    someObject.setAttr1(row.getAttribute("Attrbute1").toString());
    someObject.setAttr2(row.getAttribute("Attribute2").toString());
    objectList.add(someObject);
    operationBinding.getParamsMap().put("param1", objectList);
    ResultObject result = (ResultObject) operationBinding.execute();
    Inside the for loop (or any other place in the backing bean), I would like to figure out if the row was modified by the user. Please let me know if how to get that. If ADF provides this automatically, that would be GREAT.
    Thanks,
    Ash K

  • Billing date in sales order should not be modifiable to backwards dates

    hi gurus
    I have a requirement where in few users while creating a sales order , they should not be able to modify the billing dates to previous dates . So that particular field shd not be modifiable . Could use some help here .
    Regards
    JNM

    Dear JaganNM,
    While creating the billing document in VF01 the billing date will be changed manually by the user.
    This change will not applicable in sales order.
    Once you save the billing document you can't change the billing date in sales order ,it will be graded out.
    Before saving the billing document only the date can be changed in sales order.
    Let me know if you have any further clarifications.
    Thnaks&Regards
    Raghu.K

  • How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

    How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

    Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that  being the studio/rights-holder hasn't feel inclined to provide the date.

  • The delivery date should not flow from PR to PO.

    Dear Gurus,
    While creating a P.O with reference to PR.
    The delivery date should not flow from PR to PO.
    Any settings are there for this

    there is no planning.
    this is a utilites industry.
    if there is any way to do.The delivery date should not flow from PR to PO.
    please share ur  ideas

  • Purchase Req Should not be created if the order is Delivery blocked

    Hello All,
    I have a requirement in third party sales where the Purchase requistion should not be created if the sales order is delivery Blocked, as and when the delivery block is removed then only the PR should be created.
    Please help to fulfill the requirement
    Regards
    kiran

    Hi,
    Please check the field purchase req with delivery scheduling in scheduling line configuration.
    thanks
    Kuntla

  • Need By Date Should be equal or after the effective start date- error in po_requisitions_interface_all

    Hi All,
    We have created a manual planned order for one buy item in ASCP workbench for some qty and released it.
    But, we are not able to get its requisition created in source.
    When we check the PO_Interface _Errors table, we found that it is errored out with error as --
    Need By Date Should be equal or after the effective start date .
    Can anyone please help me out to find the cause of this issue. Any help/pointer in this regard will be highly appreciated.
    Thanks,
    Avinash

    Hi Abhishek,
    We found the root cause of the issue.
    Its BPA was not having any Effective start date mentioned in its terms. So we put it as BPA creation date and ran the data collection and plan run.
    After that we were able to see its BPA release created without any error.
    Thanks,
    Avinash

  • After creation of PO system should not allow to change the price in PO

    Hi There,
    In my scenario once PO is created then after send to vendor PO print document,Users are changing the price in PO.so system should not allow to change the price in PO once PO got saved.
    So please advice.

    Hi,
    you could set in customizing for field selection keys the net price      
    to display for ME22N so that changes can not be made         
    (transaction OLME -> purchase order -> Define Screen Layout at Document Level).
    Please check that you have set all the relevant field selection      
    groups to display: AKTV, ME22, ME22N... (read and apply note 30316)                                                                               
    Other workaround is try to do by yourself with the badi                      
    ME_PROCESS_PO_CUST and send your own error message.    
    Regards,
    Edit

  • "The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?

    I don't know what's wrong with my Mac Mozilla Firefox, version 3.6.8, but today, it started alerting me about an error message on the "Error Console". In every website I visit, it tells me: "The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?
    I saw a pop-up which did not allow me to click it when I scatter the windows on my Mac. I was using Private Browsing, with pop-ups disabled, but one pop-up managed to get passed my settings, and open in another window. It would not allow me to select it, so all I did was to close Firefox, and start a new session. So far, everything has been normal, I also deleted the cookies it installed.
    But, I still keep seeing that "Error Console" notice under my "Tools" on the Menu Bar, and when I clicked on it, it listed errors (such as what I listed above).
    Would someone explain this to me?
    Thanks for your help!

    The messages you see in the Error Console are mostly to assist the web site's author in resolving compatibility problems. Some of them can assist you in determining why a web site doesn't work as intended. The one you mentioned doesn't sound that suspicious, except that it occurs on many sites. Perhaps one of your add-ons is trying to monitor what you type?
    To diagnose whether this is caused by an add-on or one of your settings, you could try the following:
    First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
    Next, try starting Firefox in Firefox
    [http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
    Does that resolve the errors? If so, then an add-on usually is the culprit. If not, try creating a new (blank) profile: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
    If the new profile works correctly, you can choose between further research on your old profile or moving key settings like bookmarks from your old profile to the new one. [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
    Hope this helps.

  • USER EXIT/ BADI (The price should not be changed in the billing document)

    Hi all,
    We have given manual entry provision for pricing in Sales order level. But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing. 
    Kindly help me for finding USER EXIT/ BADI to achieve my requirement.
    Thanks.

    Hi,
    Please refer to OSS notes:
    105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
        USEREXIT_FIELD_MODIFICATION
        USEREXIT_PRICING_CHECK
        USEREXIT_FIELD_MODIFIC_LEER
        USEREXIT_FIELD_MODIFIC_KZWI
        USEREXIT_FIELD_MODIFIC_KOPF
    1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
    Regards,
    Marcin

  • Price should not be visible to other user's in sales order..

    hi friends ...
    my client requirement :
    price should not be visible to other user's in sales order level, it should be visible after invoice only ...
    eg : gurgoan user should not be able to see the sales order price of hyderabad user raised sales order ... but gurgoan user should able to raise the sales order for his customer ..
    plz reply me in detail with configuration steps  .... thanks in advance ....

    Hi
    If you are talking about pricing condition control through authorizations in sales transaction VA01, VA02 etc. - please check SAP Note 105621: Suppressing display of Sales Order Conditions.I would suggest that you search for this auth object and note and work accordingly) and it shall enable you to restrict display to specific conditon type (for example VPRS: cost).
    For this you need to know the pricing procedure and step number relevant to your sales order. Please seek guidance from functional consultant on it.
    Secondly as you want to restrict access on geography you have to use org level controls as applicable along with the above auth object.
    Hope this helps
    Prashant

Maybe you are looking for