Orders stuck in "Released to Warehouse" in Shipping transaction screen

Hi,
we used the RO to transfer inventory between different org, 1 order was stucked in shipping transaction screen:
Line status: Released to warehouse
Next step: Transact Move Order
But I can see move order number in shipping transaction screen, the item also reserved, the order line showing allocate.
In Transact Move Order, I can not find any record.
In pending transaction screen, I can find those records, but no error message, can not submit there.
Can anyone please advice what is the next step i need to do to process to the Pick Released status.
Thanks,

If your shipping delivery details are at 'Released to Warehouse' then the pick release has already taken place. Depending on your setups, you may also find that you have generated pick slips for these orders.
If it's correct that those 300 orders should have been released, then you need to take the following steps to pick confirm. You don't mention if you are using mobile apps so we'll assume you're using the forms in which case you'd go to the Transact Move Orders form in Inventory and using either the pick slip or the move order (printed on the pick slip and visible in the Shipping Txns Form) or the order number (Pick Wave tab), query back the pick release suggestions/allocations and either confirm or amend as appropriate. If you're using lot or serial control then you will need to supply this information also. This will change the status for the confirmed lines to 'Staged/Pick Confirmed' in the STF.
If you didn't intend to release some or all of those orders then you will still need to query back the move orders in the Transact Move Orders form but you should then either backorder or cancel the allocation for each line as appropriate (Tools menu).
If you expected your lines to be automatically pick confirmed on release, then your problem lies in not having used a pick release rule with Auto Pick Confirm = Yes.
Regards,
Jon

Similar Messages

  • Sales order stuck in interface with line status shipped in transaction form

    Hi All
    Can anyone tell me the reason for the sales orders getting stuck in the interface with line status Shipped in the shipping transaction form.
    I ran the Interface trip stop -SRS and mode All for this delivery Id. I checked the log file of it. The error showing in the log file is ORA-20001; ORA-20120 none of the Registers have Balances greater or equal to the excisable amount -> 350 or education cess amount ->7.
    Please tell me the set up where to check the register balances and how to proceed with this order. can we manually update the registers if required to process this order.
    Thanks in advance
    Prem.

    Hi,
    HOLD status
    This is an EOIO message whose predecessor was not processed successfully yet. The status is retained until all predecessors are delivered successfully. If a predecessor has the "System error" status and is restarted, all successors are also restarted provided that the delivery of the predecessor is successful.
    If a predecessor has the "canceled with errors" status, further processing is not possible in systems before Support Package 11 for the adapter framework and Support Package 10 for the adapter framework core patch 02. In higher version systems, the status of predecessors can only be set to "canceled with errors" in a manual way. Successors that have the "Holding" status can be restarted after you have set the "canceled with errors" status (see related note 811864).
    Regards,
    Sreenivas

  • Release Sales Order Form & Shipping Transaction

    Hi,
    What is the Difference between Release Sales Order Form & Shipping Transaction Form.
    Pick Release can be done from both the forms.What is the difference.
    Regards.
    AK.

    Hi,
    Your question :  What is the difference between Release Sales Order Form & Shipping Transaction Form?
    In Apps, Release Sales Order Form is basically used to move Material from Inventory to your staging area e.g stock yard (pick release activity), at this point the material is still inside your premises..
    Shipping Transaction Form is basically used to move material from staging area to customer site..
    Your 2nd question is : Pick Release can be done from both the forms.What is the difference.??
    Through Pick release form you can do pick release where you don't need any grants... and to do the same through Shipping Transaction form you need to have access rights to do ship confirm and pick release.. In other words, Through Shipping Transaction form you can restrict/allow user to do pick release where as in Pick release form no such restrictions are there..
    Shipping Transaction form is basically a combo package :) through which you can control Pick release, Ship confirm, Delivery etc..
    For the Grants and Role you can check details under : Setup --> Grants and Role Definitions --> check Grants & Define Roles form..
    Roles form will let you what are the actvities can be done and can be assigned to users..
    Hope this will help...
    Regards
    S.P DASH
    Edited by: spdash12 on Oct 27, 2009 10:43 PM

  • Quantity Baed Order Type for Release from ASCP

    Hi All,
    I have got requirement where the order type for release is defined based on the quantity. For certain set of items, they can be made warehouse with some base items if the quantity to be shipped is less than a threshold quantity ( say 15). But they need to be drop ship from plant if the quantity s greater than this.
    How can setup this in ASCP.
    Current solution that I am evaluating is using release hooks. Using release hooks I am evaluating the change in order type based on quantity.
    Any suggestions or simpler way to do this?
    Regards,
    Yash

    Dear Sunny
    Have you solve the problem?
    When I use J3AT for allocating stock, I meet the same error with you, Just for some of the Sales orders.
    Thanks.

  • Blocked sales order is not released from VKM3

    Hi
    We are using credit management and when a sales order is created with the amount, which is more than credit limit, system is blocking the sales order for delivery. Values are getting updated in FD32 and S066 and S067. When i tried to release the sales order from VKM3, sales order was displayed, but when i selected the release flag and saved it, still the order is not released. Order is having credit limit block in sales order in shipping tab at header level. Why system is not releasing the sales order even it is displayed in VKM3
    Please respond
    Regards
    Srinivas

    hi,
    check the following steps of assignment you did right or not
    1)first check in  t- code FD32 U  assigned authorization person & each credit limit U shud assign
    an authorization person along with credit limit
    2) check - conditon records with KRML output is there or not
    please read standard SAP config help as a check point doc.....[Credit mgmt|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf]
    let me know if it is soling your issue
    Regards,
    Rajeev

  • How to setup to change status line sale order via shipping transaction

    Hi all,
    When create sale order Qty = 10 and Lot_xx = 10 but i want to reserve qty = 7 and . In this business will be reservation Qty order for jot and lot only
    acction plan below 2 case :
    Case (1)
    Via Release sale order form :
    Enter sale order number and check box prior reservation only.
    Via Shipping Transaction form :
    Line sale order will be slip 2 line
    Line 1 status is stage/Pick Confirm Qty = 7
    Line 2 status id Redy to Release Qty = 3
    Go to ship confirm
    ---> Line 1 status is Interface
    Line 2status is cancle
    ***** I dont want Line 2 is cancle i want this line backorder. I believe oracle will be can setup option to choose backorder or cancle line sale order after release sale order. But i don't know to setup this.
    Case (2)
    Via Release sale order form :
    Enter sale order number and dont dont check box prior reservation only.
    Via Shipping Transaction form :
    Line sale order will be slip 2 line
    Line 1 status is stage/Pick Confirm Qty = 7 Lot_xx
    Line 2 status id stage/Pick Confirm Qty = 3 Lot_yy Automatic select Lot other
    ******* In face I think when reserve spacific and release sale order will be release Qty = 7 only and Qty = 3 is get backorder. But in face Line Qty = 3 status is stage/pick confirm and seletc Lot_yy, i don't want this and how to best solution.
    Best Regards,
    Prathana.

    You can write a simple pl/sql logic to get the correct org id. I am assuming that you have two responsibilities in the same operating unit and one should default with A and one should default with C. Both use the same order type.
    When the resp that is responsible for org A, will have org A from order type.
    For resp that is responsible for org C, you can create a pl/sql logic where you read the current responsibility using fnd_profile.value('RESP_ID'). If the resp_id is responsible for C then return organization_id of C.
    You can find example code for order line entity for attribute tax code.
    Let me know if you need anymore info.
    Thanks
    Nagamohan

  • Sales order line split in shipping transaction

    hi all :-
    1- i have an order line with quantity 110 , and book this order
    2- go to shipping transaction to pick release this line. it split it in two lines with diffrent Sub Inventories
    3- re Query to Make Ship Confirm , and make ship confirm
    at this point , by default the order line also Splits to two lines
    i find the order line not splitted yet and is one line with 110
    Please , I want Clearness For This Point
    thanks

    Hello
    you may wish to come back with more info
    1. Item type
    2. Lot enabled / disabled?
    3. what quantity for each line?
    this info will help to find out root cause for this behaviour
    Cheers
    kamal

  • Purchase order Revision and Releases

    Hello All
    Can any one tell me the keyfig for Purchase order Revisions and Releases.I am trying to built a report that has PO Revision count and PO Releases count.
    Any help would be appreciated
    Thanks

    Hi,
    PO release is a approval procedure. If a PO fulfills certain conditions (e.g. the total order value exceeds $10,000), it has to be approved (by the cost center manager, for instance) before it can be processed further. This process of approving is knows as release procedure.
    PO revision refers to changes made to PO. If an existing PO is changed, the system can print an amended PO displaying the changes. The first change is printed as 'amendment no. 1", the second as 'amendment no. 2" and so on.
    Hope this helps.

  • Reversal of a maint. order which was released through a maintenance plan?

    Hi All,
    Is there a way to do reversal of a maintenance order that was released through a maintenance plan?
    Because I do not want to process the order; as such I would like to put a reversal indicator for that order and go ahead with the next order that was called through a maintenance plan.
    If YES, kindly let me know how to do it?
    Many thanks in advance.
    Kannan J

    Hi Thyagarajan, Thanks for the response!
    When I want to skip the maintenance call object that was generated through a plan, the system gives me the following message.
    "CALL CAN NO LONGER BE SKIPPED"
    When I press for further help, system gives me the following message:
    "Call can no longer be skipped
    Message no. IP405
    Diagnosis
    You have tried to skip a date that has already been called.
    System Response
    Since maintenance call objects, for example, maintenance orders, already exist for the dates that have been called, you can no longer skip a date within the scheduling process.
    Procedure
    If you do not want to perform the maintenance call objects due on that date, you must reverse the orders that have been called.
    You can select the maintenance call objects that have been called using the list editing functions in maintenance processing."
    Which means there should be a way to reverse the order, isn't it?
    May be with this message you may be able to throw some help on this.
    Many thanks in advance
    Kannan J

  • Purchase order yet not released

    Hi sap gurus,
    i have done purchse order .then i am creating goods receipt for that purchase order but i am getting these error purchase order yet not released.plz tell me how can i solve these problem

    Hi Prasad
    Its simple prasad ur PO is suject to release strategy (Approval process) so the authorized person has to release the PO through the following process -
    Just go to Transaction ME29N or ME28, enter ur PO no.
    If u follow ME28 give ur release grp / code enetr PO no. and execute ur PO will be reflected in the list put the cursor there and press Release+Save Iconit will release the PO and then u will able make the GR.
    If u follow ME29N then give ur PO no. and go to release tab at the header level and press release icon.
    Best regards
    Vineet Baweja

  • How do I get iTunes to arrange movies (from a series) in the order they were released

    Bottom line, we all download movies into iTunes and regardless of if you view them as a list or as cover art, they are always in alphabetical order.   But when you have a series of movies (pick any of your favorites... Harry Potter, Twilight, Transformers, whatever.) as part of your collection, is there a way to get those movies to show in the order they were released?

    You asked if there is a way to impose a more useful order, and there is, but it requires a little effort on your part. Doing so via the sort fields (in the iTunes Get Info window) means you keep the original display names but just influence the sort order. An alternative, but still effort, is to tell iTunes that a series of movies is a TV Show, and then use the Episode ID field to control order.
    And no, local changes don't get mirrored to iCloud, so if you have a device that shows cloudly links to your purchases they will display with the original store metadata. In fact if you enable Show All Music and Show All Videos on your device the store metadata can sometimes be shown in preference to your edits even when you have the content in question loaded onto the device from your own library.
    There aren't any features that would made the process easier. Use iTunes Feedback if you would like to suggest improvements.
    tt2

  • Sales Order Number is not picked in the shipping trasaction.

    Hi,
    After creating a sales order,then navigating to shipping trasaction and giving sales order number and then
    when i am clicking find button,the following error is coming in OM R12.1.1
    APP-WSH-231210:An unexpected Error Occured for line 388298.The Error is:ORA-04062:signature of package "APPS.WSH_DELIVERY_DETAILS_INV" has been changed.
    why i am getting this error?
    Thanks in advance.
    Regards,
    Bharathi.S

    Hi,
    The package WSH_DELIVERY_DETAILS_INV is invalid in your instance as you are getting "Signature of package apps.WSH_DELIVERY_DETAILS_INV has
    changed" error message...
    Recompile the Invalid objects and hope this will solve your Shipping transaction issue...
    Regards,
    S.P DASH
    Edited by: spdash12 on Sep 15, 2009 5:33 AM

  • How do I get iTunes to organize albums in the order they were released

    iTunes displays the albums in the order of the tile. It should display the albums in the order they were released how are you supposed to do this I've played with sort order and it makes no difference. This seems pretty basic way of organizing an artists music has Apple lost their collective mind with this release of Itunes?

    Why does it absolutely have to display albums by the order they were released?  It can do what the programers want it to do.
    You can sort by album, but then by multiple clicks on the album column header you can get album by artist and album by year.

  • Purchase order changes after release

    Hi,
    How can I block a purchase order to any changes after release it and then, in case of need, mark for deletion the purchase order itens?
    Regards,
    Maria

    Hi,
    To block any changes in the purchase order to after release, set Changeability  indicator as 1 for  Release ID "R" in following path & save.:
    SPRO ->MM - Purchasing -> PO -> Rlease Procedure for PO -> Define Release for PO -> Release Indicator
    NOTE:If you set  Changeability  indicator as 3, PO can be changed after release and trigger a  new release strategy based on value changes.
    Regards,
    Biju K

  • API for Work Order status from Released to Unreleased or any user defined s

    Dear All
    Is there any API for to change work order status from Released to Unreleased or any user defined status.
    Take care
    Aamir

    Hi Ben,
    As query is resolved, you should close the Thread after rewarding to the Concerned
    Thanks,
    Manish

Maybe you are looking for