Palm Pixi simple question for the pros

How do I block my wireless number from being displayed on an outgoing call, or can it be done?
Post relates to: Pixi p120eww (Sprint)

Hello!
If im interpreting this correctly, you want your number to not be displayed on people's caller ID. In those cases, 2 ways to do this.
1. Use *67 to block calls. On your phone, dial *67, then whatever phone # you want and dial. Would need to do this for every call you want you number blocked.
2. Contact the carrier to put a block on your #. Afterwards if you want your # visible, just dial *87 then the phone #.

Similar Messages

Timeline/work question for the pros

Hey folks,
Looking to assess how long a project would take. I'm a mediocre coder at best so I'm wondering for a skilled flash coder, how long would a menu take to build. All artwork would be provided for the project, but simply linking existing buttons to specific pages and having a launch button on each to fetch a url. What do you think something like this would take (ballpark wise)?

A basic menu with just buttons and links should not take more than an hour if all the artwork is provided as well as accurate requirements definition up front. Considering a usual lack of the well-defined requirements and back and forth I would go two hours for an estimate.
Any estimate needs to be predicated on your understanding of the scope and the client's understanding that a change in that scope means a change in the effort/time/cost. So if the client was answer back to say the number of buttons is quite large but they still won't say how many, I would just say that I charge by the hour.

Question for the pros

Evening all,
This is my first post here, as I'm just starting out with
Dreamweaver. I began making
really basic websites 6 or 7 years ago - hand coding
everything, but as I said, these were basic, simple pages - long
before I'd even heard of CSS, XHTML etc.
I'm getting back into web design after a few years of not
going anywhere near it, so I'm at what I guess you'd call "beginner
beginner" stage!
Like most things, its easy to get disheartened and
pessimistic when faced with the intimidating idea of mastering all
things web design, so my question is for all of the users here who
are at an advanced or professional level - how long did it take you
to get to the stage you're at now? Problems encountered along the
way?
Also, would enrolling in a course be advisable, or is it
possible, given time and dedication, to become accomplished at all
of this using books, online tutorials like Adobe and Lynda.com etc?
Thanks!
C

"freshlysqueezed" <[email protected]> wrote
in message
news:gnta26$qkf$[email protected]..
>
> Like most things, its easy to get disheartened and
pessimistic when
> faced with
> the intimidating idea of mastering all things web
design, so my
> question is
> for all of the users here who are at an advanced or
professional
> level - how
> long did it take you to get to the stage you're at now?
Problems
> encountered
> along the way?
Even after 15 years at this game, I occasionally get
disheartened by
complexity of web development. It's a relatively new
technology and
has developed at an astounding rate. I think it's wise to get
things
in perspective. The basics of web development are easy to
master. HTML
has a relatively small number of tags that are regularly
used; and the
*theory* of CSS is quite simple. Where CSS is difficult is in
practice: properties can be combined in an infinite way.
Getting to
the top level takes a lot of time, patience, and inspiration.
There's also a considerable difference between designers and
programmers. I'm "OK" at design, but it's not my forte. I
much prefer
working on the back end of a website using PHP. Many
independent
developers cooperate with others, subcontracting aspects of
the
website to people with skills in areas they lack.
> Also, would enrolling in a course be advisable, or is it
possible,
> given time
> and dedication, to become accomplished at all of this
using books,
> online
> tutorials like Adobe and Lynda.com etc?
The value of a course depends on the teacher and the
curriculum. I
both teach and write books about Dreamweaver, and would like
to think
my students and readers learn a lot from them. There are some
very
good courses on Lynda.com, and of course you can come here
for help on
specific problems.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com

A question for the Pros!!!

Hi everybody,
First, i'm a LogicExpress user. Not that i want to underestimate the people at the LE forum, but i guessed that i could get a more informative answer over here. In the plug-in PDF manual of LE, they always show the reverb plug-ins with a "mix" parameter of 20 or 50% . If i put it on a buss to use it as a send return, should the mix be 100%? I read somewhere that send-return FXs should be 100%, but does that apply to reverb also? When i do this, i get a lot of reverb with a very small buss amount(send) which is kind of difficult to work with. I find it hard to get a different amount to different instruments or audio tracks since any amount of buss value returns me a lot of reverb.
I don't know if what i write makes any sense, but if any of you PRO guys or girls have 5 minutes to spare, i could need some light!!! Thanks.

Yes, reverb on a buss should be set at 100%. This way, you can control the amount going to the individual tracks from the send control. Not that you can't do it the other way, it's just that this is the more common usage.
This is also the way Logic Pro's Space Designer reverb is implemented. When opened on a track, the direct parameter (akin to a wet/dry parameter) is set on 100%, so that 100% of the direct signal is fed through the reverb.
When the same reverb is opened on a buss or aux, the direct parameter is automatically set at 0%, meaning no amount of direct signal passes through.
Logic senses where in the signal chain Space Designer is being used, and adjusts itself accordingly.

Downconvert question for the Pro's

My original sequence was 720p 59.94 with a mix of HD and SD footage. The SD footage was scaled up using the motion tab to fill the screen. Now since I am ready for SD output, I created a uncompressed 8-bit easy set up and created a new sequence. The resulting sequence is 720 by 486 and CCIR 601 (40:27) aspect ratio, and the pixel aspect ratio is also CCIR 601 40:27.
All of my SD footage has black pillars on either side. My HD shots come over nicely with a letterbox but play back nasty and jittery because of the frame rate. BTW my SD footage is 720x486 CCIR 601 29.97fps.
How can I marry these two worlds in one timeline and get a full picture and optimal frame rate playback?
Thanks!

Two things you could try...
1) Output a QT Movie of your 720p sequence and then nest that into the 480i sequence.
2) Instead of nesting the 720p sequence into the 480i sequence, just select all the clips in the 720p sequence and copy them into the 480i sequence. If the SD clips are still pillarboxed, then you can select them all and remove attributes (get rid of Basic Motion and Distort) and they will snap back into the proper size.

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

Can anyone answer a very simple question for me ive heard the apple was giving a free iphone 4 or 4s bumper away is there any truth to that?

can anyone answer a very simple question for me ive heard the apple was giving away iphone 4 or 4s bumpers is there any truth to that?

Not any more, no. There was a free bumper program back when the iPhone 4 originally came out. It has long since expired.

I have created a .png logo to use on my video. It has it's own storyline so the logo is shown overthe whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

Final Cut Pro 10.0.8
I have created a .png logo to use on my video. It has it's own storyline so the logo is shown over the whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I got logic pro and i was wondering if possible paying a little less for an upgrade!! or do i have to pay the full price for the pro x?!!!

I got logic pro and i was wondering if possible paying a little less for an upgrade!! or do i have to pay the full price for the pro x?!!!
Or if apple would work around this some way or another?

If you bought Logic 9 less than a month ago then Apple will most likely refund you so that you can buy Logic X instead.
The full (only) price of Logic X is as staed on the App Store. This price (whether people agree or disagree, like it or not like it) is still less than any upgrade price for any other DAW.
A lot of people here are saying they bought Logic 9 6 months or a year ago and want a cheaper price. For me, I started on Logic 5.5. Logic 6, you could pay an upgrade price that was way over what the full app is now but you had to add costs as things like Space Designer were extra. Their serial numbers, once purchased, got added to you XS Key, which was a dongle that never got hacked in 6 and a half years.
Apple, on acquiring Emagic, dropped the price from $1000 to $499, included all the things you had to pay extra for then dropped the price to what it is now once they went over to the App Store. They also dropped the un-cracked dongle.
So myself and a lot of other people here went 5.5 to 6 (added the goodies that were extra) to 7 to 8 and to 9. When there was an upgrade price, the price was around what the app is now.
I'm amazed at how many people see this as a full price and want money off whereas in reality a complete piece of softwaser is being offered for an upgrade price.
My first paragraph will answer your question and you probably won't care about the rest of the post. $199 or £139 IS an upgrade price.

I have a new email address and my old email keeps coming up on icloud when trying to update apps and i don't know the password or security questions for the old email. I can sign in with my apple id which is tied to another email but not itunes how to fix

I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Questions for the end users in Building an application.

Questions for the end users in Building an application.
Hello,
I am assigned a project in building a CF application. As far
as the business requirements, I have an idea from the MIS people.
However, I have a meeting with direct users and I have to ask
questions to add to my requirements. I am still a beginner in this
but I need to ask questions.
Can anyone give me tips? what basic / important questions?

For starters,
DO:
Ask them to discuss what they want to do with the application
Try to understand their level of computer literacy
Keep your conversation non-technical
Continue to interact with the users during the design and
development process
Try to identify a "champion" with whom you can interface as the
project progresses
DON'T:
Use technical terms or discuss technical issues
Talk down to them
Promise delivery dates until you have documented their
requirements and they have approved them

I have a question for the Adobe customer service dept., not for the "community" as a whole!

I have a question for the Adobe Customer Serice Dept., not the "community" as a whole. And I expect an answer! I want to know why I am expected to sign up for another service package when I just paid $25+ yesterday to be able to convert files back and forth from a PDF to a Word file and then back to a PDF. What kind of rip-off is this?

Hi,
I am very sorry that you had unpleasant experiences with our customer service.
If you would like to export your PDF files to MS Word files then ExportPDF tool will do the job.
If you would like to convert MS Word files to PDF then ConvertPDF tool will the the job.
If you would like to export your PDF files to Word file then convert the Word files back to PDF then PDF Pack service is required which includes ExportPDF/Convert to PDF/Combine Files tools.
Please let me know if you have any questions/issues.
Thank you.
Hisami

I having problem with the answer question for the App Store. And I forgot the answer

I having problem with the answer question for the App Store. And I forgot the answer

Pleae call 1800MYAPPLE ask to speak to account security

Simple name for the portal path

Hello.
Is is possible to setup Apache as to have a simple name for the http:\\servername\pls\etc.etc.etc. address? How do i set this up?
Thx.

Thx, but i wanted something like this:
the address
http://<servername>:<portnumber>/pls/portal30/etc.etc.etc.
should be contacted only by typing the following address:
http:/portal
The homepage of Portal should be shown then. I managed it now, but that is not the right way. Normally, when you type the servername, you will see an information page on Apache. I edited that page, so that it redirects in zero seconds to the url where portal is running.
But that is not a real nice way to do it. Any ideas?

Turn off the Printers color management function for the Pro-100

I've tried everything to get this printer to print realistic colors. I had the Pro-9000 MK II and it was spot on. I'm running Mac OS 10.9.1 and downloaded all the current drivers for the Pro-100. The colors are way off. I am using Print Studio Pro, Under color management I'm selecting the ICC profile for the paper being used, the printer profile was downloaded from Canon's web site and that's selected the same paper type. Color matching is grayed out.
My monitor has been calibrated so I know that's not the issue. Especially since the Pro-9000 was right on the mark. Any suggestions???
Thanks in advance.
Rob
Mesa, AZ

Rob:
“I am using Print Studio Pro, under color management I'm selecting the ICC profile for the paper being used, the printer profile was downloaded from Canon's web site and that's selected the same paper type. Color matching is grayed out.”
I use the same setup as you and I print with, Print Studio Pro and LR4. My monitor is not calibrated. I only use Canon ink and Canon paper and the corresponding ICC profiles. My color output is exceptional. Black & white is good but not exceptional.
When I purchased this printer (a couple of months ago) I just followed the installation instructions and it worked great (for color prints) right out of the box. You may want to try a reinstall to see if that solves the issue. The Pro-100 is a very good printer.
Tinman
Mesa, AZ
Nikon D600; Nikkor 50mm f/1.8G, 85mm f/1.8G, 70-300mmG f/4.5 - 5.6 VR

Palm Pixi simple question for the pros

Similar Messages

Maybe you are looking for