Palm Touchstone work with Zagg Invisible shield

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

The zagg shield is a thin enough layer that it will not affect the charging at all.

Similar Messages

Zagg invisible shield fix antenna issue?

Does the Zagg invisible shield actually fix the iPhone 4 antenna issue?

My issue is the same with or without any bumper or cover... I believe and have had it somewhat confirmed with at&t that they are having issues with the towers in my area.. and have since March.. If they are upgrading everything to 4G it makes sense to me that until it is all transitioned over and all the bugs are worked out it would give people a less then perfect signal. I have always had full 5 bars and never any complaints and have been with this company since 1993 and have seen them thru approximately 4 or 5 merges and never had anything bad to say until around March. I still was using my 3GS before the ios4 upgrade back then. So I am not convinced it is the new iphone4 antenna problem that everyone thinks it is... I have the same signal strength on my iphone 4 whether I have a cover on or not and if I hold it all different ways the signal does not change to any better or worse.. I am constantly at 1 or 2 bars.. 3 or 4 maybe once a week for a minute or two and get excited to see them. That is sad isn't it??? lol

Something went wrong with the invisible shield application

After putting on the invisible shield, I was really happy because it turned out great. I waited about two to three hours then started using it.
To my horror, I think my nano might have shorted out because when I press play the song changes. sometimes the play/pause button doesnt even do anything when i press on it...when i touch the volume control, it increases and decreases erratically regardless of what im trying to do...sometimes it even seems like my nano has a mind of its own because when i simply move the nano, without touching the controls, the song changes or the volume changes.
this erratic behavior occurs sporadically. sometimes my nano works fine. then right when i think all is well, my nano becomes possessed. is it possible that my nano has shorted out? maybe i should let it dry?

hey carl,
The process of applying the shield requires that I wet the film with soap and water. What do you suggest I do? My mistake was that I did not put on the hold button when I was applying the wet film and thus my ipod turned on while I was putting on the shield. i realize now that my nano should not have turned on for 24 hours. Should I just wait and see if the funky behavior goes away? or should i visit the nearest apple store?

Replacing the nano battery with the invisible shield... How?

Does anyone know how the invisible shield will work when the battery needs to be replaced? I am looking for a permanent solution. While I know that I will be able to peel the Invisible Shield off for the battery replacement, the shield will become stretched and distorted. At this point I will not have a shield, and don't have to want to buy another one. The only solution I think would be possible is if there was a way to slice the shield with a razor (around the seam). Any ideas. Perhaps I shouldn't buy the Invisible shield, it might just be a short term solution.
Anyone?

Actually, I think the more prudent question is whether or not the nano will even be accepted for battery replacement by Apple, or anyone else with a cover like that attached to it.
They could even charge extra money to deal with it, I can see either situation as being realistic.
If that does turn out to be the situation, then it would come down to a matter of costs as far as what you would need to do.
That being said, I personally think it is way too early to even worry about things like that since it is years off at a minimum, and it could very possibly never need to be done.

The Zagg Invisible Shield~Recommended or Not?

Just curious how many people use the invisible shield and if you would recommend it or not for the Iphone 4? I have never used one on my 3G. Only used silicone cases for protection. Just wondering if others liked it an if it's hard to install having to use the spray etc? I fear getting this liquid solution in the speaker etc. Thanks in advance!

I also recommend it for the back only, the texture of the material takes away from the whole touch screen experience. ZAGG makes some awesome skins for the back of the iPhone and you can even load your own pic up to their website and create your own custom skin. I just got my skin last week and the picture quality is awesome! If you sign up for Zagg's iPad giveaway you'll also get a 50% off coupon you can use to get the skin for around $10 instead of over $20.
http://www.zagg.com/community/contest.php

For all the folks who pre-order the ZAGG invisible shield for the iPhone 3G

My shield did not fit properly, so I emailed ZAGG. Here is what I got back:
"When we created the design for the Apple iPhone 3G we had very limited access to the actual device. We were able to complete a design for it and get this shipped for our customers so they would have protection for their Apple iPhone 3G as soon as possible. After having more time with the Apple iPhone 3G we have improved our design by making a slight change. This change makes the installation process easier and provides more protection, including covering both bevels fully.
If you would like a replacement invisibleSHIELD for your Apple iPhone 3G for the new design, we would be happy to send you a free warranty replacement.
Per the Lifetime Replacement Guarantee, your replacement invisibleSHIELD is free! The minimal reshipping and handling charge is $3.95 for an estimated 1 - 2 week delivery service for domestic and European orders (three weeks internationally) and includes free application solution and squeegee. If you would like to purchase a faster shipping method, one of our associates would be happy to provide further details.
For the quickest possible service, please call us at 801-263-0699 or toll free at 888-940-9663 and we can take your credit card information over the phone. Our office hours are Monday through Friday, 9 AM to 5 PM, Mountain Time. If it is more convenient, you can provide us with a telephone number where we can reach you, and a customer service representative will contact you. If you would like to use PayPal, please contact us and we will be happy to provide detailed information on that process. Also, if you do not have a PayPal account and are not easily reached via phone, we can email you a money request where you would be able to enter in your credit card information to send us a payment.
After receiving your replacement, we will request that you send your original invisibleSHIELD back to us with your order # or registration number. This will ensure that your lifetime replacement guarantee remains valid"
This is really bad customer service. Because they had to guess on the iPhone 3G measurements, I need to pay out of pocket to get a replacement (shipping cost)??

EVERYONE... I pre-ordered also and got the original one on but it didn't look great so I called and got the new redesigned one sent to me.
IT IS TERRIBLE. The redesigned one is worse than the first one. The front screen wraps around the edges of the phone. If you haven't looked there is a seam that runs around the front glass piece. This causes major air bubbles and making it impossible to put the redesigned on on.
Also the back has its problems too.
Best solutions.
1. return it all and get your money back.
2. get another one reshipped but make sure it is the original.
I got the original one shipped to me again and got it on correctly but after a few days it keeps fraying up. Whats next......

ZAGG Invisible Shield

http://www.zagg.com/invisibleshield/apple-iphone-4-cases-screen-protectors-covers-skins-shields.php
Is anyone using this, or plan on using this, for their new iphone? How hard is this to put on?

I have used this for my Droid X, Droid, and Fascinate. However, I would not go with it. It has an orange peel effect. I would check out ghost armor, that is a good bet. Like it a lot, doesn't scratch or leave many fingerprints, has a lifetime warranty, and makes it look like there is nothing on your phone. No orange peel effect like zagg. And, it's only about $15 bucks or so.
The site is ghostarmor.com I think. I got mine at a mall kiosk.
ing_cayman wrote:
http://www.zagg.com/invisibleshield/apple-iphone-4-cases-screen-protectors-covers-skins-shields.php
Is anyone using this, or plan on using this, for their new iphone? How hard is this to put on?

Does Zagg Invisible Shield help against glare?

Wondering if it's a good anti-glare "shield." Thanks!

The Zagg film has a slight "orange peel" finish that does break up the reflections and more importantly, it really helps reduce finger print smudges. I have used their products on my iPhone and MacBook Pro cases but never on the display. I applied it last night to my iPad and really spent a lot of time smoothing out the film to clear out the air bubbles. This morning after drying, it was crystal clear and I'm very pleased with the appearance.
So bottom line:
1) Install carefully to get in the correct position and avoid bubbles
2) Expect some nominal reduction in glare and reflections
3) Expect a tremendous reduction in finger print smudges!

How to avoid water damage when installing invisible shield

Just wondering what you have to do to avoid water damage when installing Zagg invisible shield? What precautions should I take so that I do not damage the iPhone when installing Zagg Invisible shield?
Thanks and I look forward to your replies.
...B

Hi BGmail,
I would stay away from invisible shield by zagg or similar products. I tried it, waste of £15, could have got myself a dock stand for my phone for that ****!! The problem with IS(invisible shield) is that the screen protector has a rubber feel which makes it annoying when swiping your finger on it + it's not scratch proof at all!! Mine scratched 2 days after the installation so badly that I had to remove it. The back it's hard to apply, does not cover everything you'd like to, also a dust trap that could get between tha film and the phone causing it to scratch, some people reporting the film going yellow after a while(on white iPhones).
What I think of IS: A poor american product heavily/aggressive advertised!! Mine is off, using a hard clear plastic shell and a good screen protector, might look bulky but it's safe, only using the shell while at work, the iPhone is pretty tough, don't forget.
Your choice... Good luck !!

ANYONE KNOW WHERE TO GET Invisible Shield FROM A UK SITE?

I want to get this: http://www.shieldzone.com/item_description/APPMCBF.html
But anyone know where to get it from in the UK?
I've also seen this:
http://cgi.ebay.co.uk/MacBook-Palmrest-Shield-palm-hand-wrist-rest-protection_W0 QQitemZ180135792711QQihZ008QQcategoryZ141177QQssPageNameZWDVWQQrdZ1QQcmdZViewIte m
and this: http://cgi.ebay.co.uk/MacBook-13-Top-case-Anti-Scratch-Protector-cover_W0QQitemZ 180136037644QQihZ008QQcategoryZ4601QQtcZphotoQQcmdZViewItem
But can anyone help with the Invisible Shield please...
And has anyone used it before, how good is it?
Thanks.

get a total body skin from www.bestskinsever.com
they also ship internationally.
they are exactly the same thing as the invisible shield but cheaper and they have
great support if u mess up the application. (ie they will send you a replacement)
i have it on my blackbook and it looks great.

Invisible Shield

Anyone have the Zagg invisible shield for the 3G Iphone

I've been using the full-body InvisibleShield for over a year.
The front has minor, almost unseen, scratches, cause unknown; the back has an obvious scratch from dropping it. It hit a box while falling. I will claim the lifetime warranty later.
No issues whatsoever with peeling. I applied it carefully and allowed it to set properly.
The back cover does provide better gripping. The original iphone was very slippery otherwise.
I am certain that the shield reduces touch sensitivity very slightly. However, there is greater sensitivity reduction since I began using a stylus three weeks ago. Nonetheless, this does not deter me from having screen protection. I can only imagine how many scratches I may have without the shield.
No regrets buying InvisibleShield despite my scratches versus their scratch-proof claim. I rate the product as very good. Note: if anyone ever needs to open the 1st gen phone's back cover, you must slice the shield. This is because there is a top and bottom (battery) cover. Fortunately, I have not done this though, but I know some people want a resale 1st gen phone, not 3G.
BTW, I use InvisibleShield on my digital camera screen and handheld GPS/PDA also. No scratches, no peeling. No sensitivity issues with my GPS and stylus. On the camera, slight brightness challenge. The shield acts like a glare filter.
Hope this helps your decision.

Invisible Shield...to install or not to install.

I've been reading up on the invisible shield online and in this forum for about a week, I ordered mine last Tuesday, and I expect it to be in the mail today when I get home.
A couple things from my reading and talking to a friend who saw a black nano with the invisible shield:
Pros: Sleek, shows the ipod the way it was meant to be (sort of)
Cons:
A) I'm kind of scared putting a wet piece of plastic on my nano.
B) Leaves a lot of residue, in case I have to return nano to apple for service (very likely) will be a hassle.
C) Doesn't look as clean as would like
D) Can't use ipod for 24hours (yea, it's only a day, but after only having my nano for a week, this thing goes where I go, blasting constantly).
E) Deliberately putting water on my nano.....kind of freaks me out.
F) The back piece is a pain in the *** to put on from what i've read, and if I did this I might not put on the back, which kinds of conflicts the original point of buying one in the first place.
I'm currently using ipod socks on my nano and works pretty good. Only problem is that it slips out of the sock in my pocket sometimes. My friend said I should wash my sock and dry it in the dryer, and it will shrink and be a perfect fit.
I'm also kind of interested in a zcover but that has mixed reviews also, or an icondom.
Ultimately I will need to use my nano in an armband at the gym.
So give me some input. Should I use the invisible shield or return it? Should I continue to use the sock until something better comes along?
Any constructive input appreciated.

I spent a lot of time reading up on nano protectors before finally ordering the invisible shield. I had gotten over the fear of putting water on the nano after hearing about one that survived a washing machine. Follow the instructions on the website and you should be fine. Don't be afraid to readjust it several times when applying it, that did not appear to affect it at all. I did have a few air bubbles under the front piece(I did apply that first) but now after a week all but one has disappeared. The back was a little tricky but it actually came out looking better(no airbubbles at all). I have read about a lot of people leaving the back off because they don't care if that gets scratched. Granted it has only been a week but I have very happy with it so far. According to the site for invisible shield it will not leave residue when removed though I have not tested it myself. Hope this helps!

Invisible shield left a sticky residue...how do i remove it

Hi everyone, I had a problem with my invisible shield so i called them up and they sent me a replacement. I just riped off the front of my invisible shield off of my 30gb ipod video i did it very slowly, but damm this thing was stuck down. Now it left a lot of sticky residue that i can not seem to remove. I have checked there website but found nothing regarding this. All they say is that it will remove with out leaving anything behind. Can someone give me some insight on how to remove this. I have tried spraying it with applicator solution and letting rubbing it, i have also tried rubbing it dry with my thumb in hopes to ball it up. None of this has been effective all it is doing is making it worse... please help

just did this yesterday on my ipod and mine also left a residue. I just used the applicator solution and those soft cleaning cloths that you use to clean glasses. It took a while but it eventually all came off, leaving a few new scratches. I had some old polish from an old ipod i had, and used that to mask the scratches. After I put the new sheild on, i could not see any more scratches. Just give it a little elbow greese.

Invisible Shield and 3G dock?

Does anyone know if a 3G iPhone with an Invisible Shield will fit in an Apple iPhone 3G Dock?

I've had them on a few devices over the years and have managed to achieve a pretty good finish. Just set aside an hour to do it as you need patience to get the back and corners to go well as it is best to leave them for a bit to allow them to get "sticky" before fixing them.

Feedback on Invisible Shield & Question

after doing some major research I decided to go with the invisible shield to protect the screen of my iPod. It arrived promptly and while not much instructions came with the shield, it had a business card with a web-address for more information.
From there it was rather easy to get an understanding of what to do and how to do it. As many people mentioned, make sure the shield is really "wet" with the soapy water. It makes applying the shield and possitioning so much easier.
I first did the front and had to start three times. The key is to place it as perfect as possible and then slightly adjust it. Use a credit card and start from the middle to the edges and push the film onto the iPod and get the air off underneath. I ended up with one small bubble on the very bottom. No big deal to me.
Let it try for 24 hours!
The next day I did the back-side and that was more tricky because of the side pieces. But again, it too me maybe 10 minutes and it was on.
Now 48 hours after I started it's all dry and looks really nice. The feel is slightly different (pretty good grip). The screen looks as great as without any covering. But I feel so much better now and don't have to be afraid of getting scratches onto the screen.
I do have a question for all of you...
Any good recommondations on a battery pack for the 5G 60GB?
Rd

There are a number of threads here on the subject, here's a link to a current one:
http://discussions.apple.com/thread.jspa?threadID=167730&tstart=25
Also if you Google iPod battery pack you'll get lots of hits on suppliers, here's one:
http://www.walmart.com/catalog/product_listing.gsp?cat=426595&path=0%3A3944%3A39 64%3A133271%3A133257%3A426595

Palm Touchstone work with Zagg Invisible shield

Similar Messages

Maybe you are looking for