Panasonic link2cell home phone system - opinions and voicemail number?

I recently bought a Panasonic KX-TG742 link2cell home phone so that I can receive my cellphone calls on standard handsets around the house.
It's a bit clunky, but it does work, including the Talking Caller ID (once the phonebook is filled in).
Has anyone had any experience with this system?  Could I replace my landline with this system without too much hassle or loss of quality?
Also:  I am supposed to insert the phone number to call to reach my cellphone voicemail, but have not been able to find it? Anyone know how to do this?  Thanks

Yes, you are right 1.9GHz range should not interfere with the router as your router works on 2.4GHz Frequency...however, if there is any interference you should place your phone furthur away from your router...

Similar Messages

  • Are there any known good home phone systems for the Home Phone Connect

    I've had the Home Phone Connect now for several months.  I have had a Panasonic KX-TG7641 for a good while now.  I bought this system to connect a cell phone through the Bluetooth to make a receive calls at home.  This cell phone stayed docked in the charger next to the Panasonic base station.  There were a few extra steps involved in order to make calls using the Bluetooth and every time my mother-in-law visits it is an extensive training process to show her how to use the phone.  Every. Time. She. Makes. A. Call.
    I saw the HPC and figured I could simplify the system and since the cell we kept connected was off contract, I got the HPC for free and signed up for 2 years with it. This was a mistake.  While I can always hear the callers on the line, they sometimes report that I am too garbled to understand.  Today I knew I was going to be on the phone on hold for a while, so I used my home phone handset for comfort (vice holding my Galaxy up to my head for an extended period of time)
    After a 30 minute on-hold with the Veterans Administration I finally got through to an operator who informed me she could barely hear me/broken and garbled.  Where I have my HPC at it is right in a window and I have steady 2 bars on it always.  I told her I could call back on my cell phone, but she insisted we power through it so I wouldn't have to wait again on hold.  Well we eventually made it through the call. 
    After hanging up I used my Google powers to see what the issue it/how to fix it.  It appears that the people that have issues when using the HPC also have Panasonic phones/base stations connected to it.       This might be because Panasonic phones are widely available and are the most common ones in use, but it might also be in that something is incompatible between the 2 systems.  Odd, since the way it connects is similar to an old POTS.  Could it have something to do with the DECT 6.0 that hey use (on the 1.9GHz band) where other older devices use standard 2.4 or 5.8?

    Thank you for the tip.  Sorry if it's the wrong forum.  I don't post here often.  I searched for the Home Phone Connect under devices and found it under "Other" so figured this was the best place to post it.  Could you point me to the correct place for the HPC discussions? 
    I'll double check later when I'm home on my computer to see iff the problems being reported are all using the DECT 6.0 (1.9GHz).  Might be causing some interference of some sort.

  • Verizon canceled my home phone by mistake and are clueless

    Verizon is the most frustrating organization I think that I have ever had to deal with.
    They canceled my home phone service because of a transpositon error. It took a long time to get them to admit that!!  My wife is sick with cancer and her doctors can not get a hold of her. Verizon knows this and still will not fix their mistake. I can never get a hold of the same person.
    I have now spent over 12 hours on my own cell phone and can not get any progress. I am so frustrated -- maybe it is time to walk away!!
    A medical emergency is not enough to get them to fix their mistake.
    UNBELIEVABLE

    Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".  You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information.  This should be checked on a frequent basis  as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • Systems Machine and Model Number. Any permanent solution ?

    Like many purchasers of refurbished ThinkPads, I find my Machine (2007) and Model (WUK) was not registered into the Systems Board by the technician during refurbishment. The result is that ThinkVantage Tool " Update and Drivers" cannot recognize this ThinkPad, therefore no updates resulting "Error 75".
    Solving this issue by renaming the HKEY (TP-79__ which is incorrect) to "2007WUK", but this is only temporary, it reverts back to TP-79__ after reboot which basically defeats Schedule Updates. To be able to input the Machine and Model Number into the Systems Board, it is necessary to use System Machine Maintenance Disc which is not readily available to us Users, Software download was also withdrawn from Lenovo Site.
    It is inconvenient to edit the Registry every time in order to check updates, therefore I feel Lenovo is denying us full accessibility to the product they are selling.
    Question:- Is there a solution to fix this issue to permanently register the machine and model number into the system without sending the product back to Maintenance/Repairs ?
    Or is this a necessity due to company procedure for extra revenue ?
    T60p 2008HA8:T7600:BHV150UX1-100:FireGLv5250:Atheros N : DVD Multi III:NMB Kbd.Samsung840EVO 250GB:4GB RAM:Wins8.1 Pro+MC.
    T60p 2007WUK:T7600:BHV150UX1-100:FireGLv5200:Atheros N.Samsung840EVO 250GB:4GB RAM:Wins7 Ult.

    Lenovo doesn’t release a whole lot of updates, especially for the older models. So you might be able to just bypass the limitation by bookmarking the downloads and drivers page for your specific machine, and checking back for new updates once a month or so.
    Definitely not a ‘true’ solution, but it’s one way to ensure that you’re getting the updates you need without having to dig deeper into the system.

  • Phone not ringing and voicemail notificati​ons on SMS not occurring

    Can someone help with this issue as it is beginning to drive me nuts !  Phone is not ringing and any voicemail message is not being notified by SMS.  This seems to have been happening since late 2013 but can't be sure of that.  Is this a SIM card issue, or a possible software issue.

    Could be either. 
    Are you using a Q10?  Your profile doesn't show a device or carrier.  it really helps us if you have that info added to your profile.  Since you're posting in the Q10 forum I'll assume you have a Q10.
    I would do a security wipe on the device first:
    To perform a Security Wipe please follow the instructions below. Be sure and use BB Link to make a full backup before proceeding with the wipe:
    http://www.blackberry.com/btsc/KB33591
    Once the wipe is complete you can restore your backup. Keep in mind that data in the backup may be the source of the original problem and restoring it may restore the problem, as well. To alleviate this I recommend not restoring the Settings portion of the backup.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • I want my appletv to play through my Panasonic DVD home theater system

    I can't get sound through the entertainment system

    It's hooked up to (haier) but I get the surround system through hdmi 1 with the cable.. The appletv is connected to hdmi2

  • I am unable to change my credit card number, because my profile shows United States therefore it does not accept the phone area code, and zip number, because I live in Switzerland. Please inform me how to do it. Many thanks.

    I am unable to change my credit card number because my apple profile shows me as a resident of the United States, although I live in Switzerland. Consequently I cannot edit my area code, zip number, State info, etc. Please advise me how to do it. Many thanks.

    Hello Luis,
    To update your billing information, you would need to change your iTunes Store country to be able to enter the information for Switzerland.  I found an article with the steps to update this:
    Change your iTunes Store country
    Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
    Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
    You can find the full article here:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • Need Help choosing a new tv and home theater system.

    I can never really keep up with all the new stuff coming out but i am not really looking for anything too fancy just simple. I looking for something around 50" and a blue ray home theater system. My budget is roughly around $2000 or so. the less i spend the better hahhahaha. anyways the only thing i will be hooking up to the tv is the new home theater system, cable and Xbox 360. Any suggestions?

    All the 50" tvs are plasma, so I would recommend:
    Model: PN50C680G5F | SKU: 120138 Model: YHT-493BL | SKU: 987545 Model: 114011-00 | SKU: 9343356 Model: 114011-00 | SKU: 9343356 Model: BD-C5900 | SKU: 1012858
    That's a Samsung 50" 3D Plasma, Blu-ray player, Yamaha Home Theater system, and your 2 HDMI cables.  You'll need another HDMI cable for Xbox 360 if you don't have one already to connect to the receiver. 

  • Re Verizon Wireless Home Phone Connect garbled voice problems

    I hooked up a Verizon Wireless Home Phone Connect device and plugged my Panasonic KX-TG5665 5.8 GHz Digital Gigarance phone base into the home phone connect device in the center of my home.  We have several Panasonic extension phones in different rooms in the house.  This changed the quality of my phone service to terrible , to the point where we don't even want to answer the phone.  Incoming callers are complaining that we are "garbled" and difficult to hear and understand.  It also sounds like the callers are garbled as well.  We can no longer use the "speaker" on the phones because the voices are so garbled. I plugged in a wired phone to the Verizon device (which meant answering the phone at the Verizon device, which is not convenient) and the incoming callers say that our voices are "less garbled".   I need to know how to fix this problem.  I hesitate to go out and buy new phones until I know if this is a Verizon device problem.  What phone systems work well with this device?  We have a large 2-story home and live in an area with a lot of oak trees, and need to have reliable phone service (not just in one room with a corded phone).

    I had to check and see if this was a recording of one of many calls I made to Verizon about my problems. I have had it almost 2 yrs now and HATE IT!! No one can fix it talking on it is as tyvm518 and pete92833 have said, it is so "garbled" The worse thing is that when places put  you on hold and play music ! OMG I feel like I will bawl it is so  horrible! No one understands that at all! I have changed phones, bought phones and even borrowed phones from family to check it out. Little or no change at all. The last tech that I spoke with even went so far as to say that "I should never been connected with this set up because when she checked it out I had little to no signals in my area. But nothing was done about it. I was told a couple of times that they would send someone out to check it for me. I have MS, am disabled and elderly. My husband is ill and 74. I rely on my phone and my PC a lot. I wanted to get out of my contract after she told me that it was basically they who were in the wrong to set me up. After all I only had a few mo to go. But she said that I would have to pay a "FINE TO CANCEL EARLY"!! I did tell her that I hate it and and will not be resigning another contract! Maybe that is why they do not call back? I NEVER lose my temper, use bad language or nor disrespectful. I use my daughters AT&T cell phone most of the time now.

  • How i fix the error 1015 for my iphone3g coz my phone i opining

    how i fix the error 1015 for my iphone3g coz my phone i opining and also i can use since i face that problem

    Yes, if it has been jailbroken, then there is probably nothing that you can do and you will never be able to use it, so ditch it and buy a new phone.
    If it's an iPhone 3g, then it is a very old phone anyway and you shoud consider buying a new one.

  • Same FI and SD number ranges

    Hi,
    How can in the system FI and SD number range for billing documents be made same.
    thanks
    Rekha

    Hi,
    FI and SD number ranges can be made same for billing documents. SD number range should be made internal and FI number range should be made external.
    Thanks
    G.Bharathi

  • FI and SD number range same

    Hi,
    How can in the system FI and SD number range for billing documents be made same.
    thanks
    Sekhar

    Hi,
    FI and SD number ranges can be made same for billing documents. SD number range should be made internal and FI number range should be made external.
    Thanks
    G.Bharathi

  • Routing issue with ASA and UC540 phone system - at ASA???

    Having an issue with routing from the PC at .242 to the CUE server at 10.1.10.1. The CUE server is built into the UC540 phone system. It is an internal piece of software that is used for voicemail and management. The UC540 is not only a call router, it is also an IOS router. It has it's own WAN connection as does the ASA.
    Here are some facts:
    1. Can ping the UC540's internal CUE server from the PC ( ping to 10.1.10.1 )
    2. Can ping the UC540's VLAN 1 address from the PC ( ping to 10.1.10.1 )
    3. The ASA is the default gateway for the PC.
    4. I have a route inserted at the asa that is:
                   route 10.1.10.1 255.255.255.0 10.19.250.254 1
    5. I have a nat statement that prevents NAT from occuring but I don't think this is necessary as the 10.1.10.0/24 network isn't otherwise defined on the      ASA.
    6. I cannot pull up a web page when I point the browser on the PC to the 10.1.10.1 address
    7. I CAN pull up a web page on the PC when I create a static route on the PC iteslf :
                   route add 10.1.10.1 mask 255.255.255.0 10.19.250.254
         Is is only with this route that I am able to get to the web GUI on the phone system.
    8. The phone system has a loopback interface at 10.1.10.2 that serves as the gateway for the internal CUE server, the internal CUE server is at      10.1.10.1
    9. The switch is a 2960 and has a trunk port to the phone system to allow for the voice vlan which is at 10.1.1.0/24, no issues with this vlan and phones      are connecting to the system fine.
    Since I can get the GUI to come up when I set a static route on the PC, then I would assume that the routing in the phone system with it's internal server is fine as it wouldn't work otherwise. Since I can successfully ping the CUE server from the PC, that would lead me to believe that the ASA's routing is setup correctly..... TCP traffic doesn't seem to get to/from the CUE server.
    Here are the routing tables:
    ASA:
    Gateway of last resort is xxx.xxx.xxx.xxx to network 0.0.0.0
    C    xxx.xxx.xxx.xxx 255.255.255.252 is directly connected, outside
    S    172.16.100.100 255.255.255.255 [1/0] via 38.97.193.65, outside
    S    10.1.10.0 255.255.255.252 [1/0] via 10.19.250.254, inside
    C    10.19.250.0 255.255.254.0 is directly connected, inside
    S*   0.0.0.0 0.0.0.0 [1/0] via xx.xx.xx.xx, outside
    The UC540 phone system's router side:
    Gateway of last resort is xx.xx.xx.xx to network 0.0.0.0
    S*    0.0.0.0/0 [1/0] via xx.xx.xx.xx
          10.0.0.0/8 is variably subnetted, 7 subnets, 4 masks
    C        10.1.1.0/24 is directly connected, BVI100
    L        10.1.1.1/32 is directly connected, BVI100
    C        10.1.10.0/30 is directly connected, Loopback0
    S        10.1.10.1/32 is directly connected, Integrated-Service-Engine0/0
    L        10.1.10.2/32 is directly connected, Loopback0
    C        10.19.250.0/23 is directly connected, BVI1
    L        10.19.250.254/32 is directly connected, BVI1
          XX.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
    C       XX.XX.XX.XX/29 is directly connected, FastEthernet0/0
    L        XX.XX.XX.XX/32 is directly connected, FastEthernet0/0
          172.16.0.0/24 is subnetted, 1 subnets
    S        172.16.100.0 [1/0] via 10.19.250.1
    The UC540's internal CUE server:
    Main Routing Table:
               DEST            GATE            MASK                     IFACE
          10.1.10.0            0.0.0.0           255.255.255.252       eth0
            0.0.0.0             10.1.10.2         0.0.0.0                    eth0
    Any help appreciated!!!
    Thanks!

    Hello,
    Where you able to solve this problem? It does sound like an issue with TCP state checking on the ASA. The Firewall needs to see both sides of the traffic but the return traffic is going from your UC540 direct to the PC. The firewall essentially kills the traffic.
    I would recommend disabling TCP state checking on the ASA and see if it works. Otherwise, you will need to stub route the UC540 as a separate VLAN off the ASA which needs to route through the ASA to reach the PC.
    Here is a info page on the TCP State Bypass:
    http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/111986-asa-tcp-bypass-00.html
    Please let me know how it works out.

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • Could the Panasonic 5.1 3D Home Theater System Blu-ray Disc Player be used as speakers on a windows

    Could a 
    Panasonic - 5.1 3D Home Theater System - 600 W RMS - Blu-ray Disc Player be used as only speakers on a windows 8.1 desktop? And if so would it use bluetooth?

    Hello coltyn-
    Based on the product description, it certainly looks like it may be able to be used as the speakers for your desktop set up.  Most likely you will need to buy some additional materials.  Unfortunately, I’m not an expert on this, so I would either recommend waiting to see if one of our community members comments on this or you can check with the experts at your local Best Buy store.
    Thanks for posting!
    Bill|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

Maybe you are looking for