Partial Delivery in Sales Order with Different Delivery Dates

Dear All,
In Sales Order we need to specify the different delivery dates for the items ( Partial Delivery ).
Ex: If I add one sales order for 20 qty of an item today.I need to specify 5 nums to be delivered on immediately
and next 10 qty i need delivered on after 15 days and rest of the remaining qty delivered on after another 15 days.
How we configure in SAP B1 Sales Order.
Please guide me.
Thanks in advance.
- Rajesh

Enable 'Del Date' in Form Settings of the Delivery.
In the First Row, select the Item, Qty 5 and type Del Date Immediately
In the Second Row, select the Same Item, Qty 10 and type Del Date after 10 Days
In the Thrid Row, select the Same Item, Qty 5 and type Del Date after 15 Days

Similar Messages

Sales order with different Distribution channels

Hi experts,
how can i create a sales order with different distribution channels.
I mean item level 10 = one distribution channel.
Item level 20 = another distribution channel.
also in Item level 30 also.... is it posible .?? how can i create ??
because we have the material in different distribution channel in differen plant with different price ..
Thanksin Advance,
Anthyodaya.

Hi Anthyodaya,
As already answered by others, the distribution channel is only on header level(VBAK), so it is not possble to have different distribution channels in one sales order.
Could you please consider using different division?
Item division could be different than header.
Go->item->Sales B->Division
Hope it helps.
Best regards,
Smile

Creditreport that displays Sales Orders with Material Availability Date as

Hi
I need input if the following requirement can be met in FSCM credit mgmnt.
Currently In FDK43 there is a total sales figure that represents the Sales that are consuming the Credit Limit assigned to the customer, unfortunately there is no drill down on this number to see which sales orders are responsible for the consumption of credit
Do we have any sales report that displays Sales Orders with Material Availability Date as an output in conjunction with Credit limit .

Not in standard provided. Custom program is required.
Regards
Hein

Delivery is pulling items with different delivery dates from sales order

hi all,
i have a sales order with two line items with different delivery dates(eg 1st and 21st). material availability date for them is different. when i tried to create the delivery on 1st it is pulling the 2nd item whose delivery date is on 21st.
where can i control this.
thanks in advance
harini

Hi,
let us take one example>materials A and B,
A delivery date is 22.01.2008(maintained in schedule lines in SO)
B delivery date is 30.01.2008(maintained in schedule lines in SO)
now i want to deliver material A on 22.01.2008
by default system will give you only material A in the item line
material B will not be displaced in the second line item
now i want to deliver material B on 30.01.2008
by default system will show me material B in delivery line item
if in case material A is not delivered then delivery will show you two line items
i.e., Material A and B
i think you have understood the difference
regards,
US

Partial delivery of sales order with some line items

Hi all,
Please help me in the issue i want to create delivery against sales order partially for some line items of the sales order . Can any one suggest me the procedure how to do it through programing .
Thanks in advance,

Hi,
You have several methods of doing same.
Method 1
Go to VL01N, and given your sales order number.
Without giving the line item, just press Enter
Now inside the delivery, you can delete unwanted line items, and you can adjust quantities under Item overview tab.
After that do picking and PGI.
Method 2
Go to VL10E,
Give your sales order number and execute.
Mark relevant schedule lines only and press execute,
then those line items with marked schedule lines will copied to the delivery document.
Best regards,
Anupa

Combine stock transfer orders with different delivery dates into 1 delivery

Hello,
In transaction VL10B, the system normally combines stock transfer orders that have the same ship-to-party and same delivery date (if the combination indicator in the customer master specific to sales and distribution is checked). My business requirement is to combine stock transfer orders that have the same ship-to-party but different delivery dates. Is this possible through standard configuration? Is there a user exit that can allow this?
At the moment the system is creating different outbound deliveries according to the delivery dates specified in the stock transfer orders.
Please advice a solution.
Regards,
Felipe

Felipe, please have a look at OSS note 386340, it may help to solve your problem about combining STO items with different delivery dates to one delivery (as I understand the code correction overwrites the delivery dates...).
Edited by: Csaba Szommer on Jan 21, 2011 5:06 PM

Sales order with different divsions...

Dear All,
I am creating a sales order with one sales area (1000-01-01), materials are 3 different divisions (01.02.03), but in all SIS reports system is updating with only one division i.e 01. But, I want to know the sales report for all the divisions.
What all are the settings need to be done.
Note: I tried by using common division also (00), but facing the same problem.
Could any one plz suggest me.
Regards,
Ramu

Hi
If the header division and item division are different the system can react in various ways
If you make some entry in check division in VOV8 depending on the control that you have set the system will react
Assuming that if you maintain check division in VOV8 BLANK and if the item division is ticked the system will not accept your order as the header div and item div differs
Assuming that if you maintain check division in VOV8 BLANK and if the item division is not ticked Then you should have a SH defined in the material divisions sales area
E.g
1000,10,01 say this is ordering sales area customer is X
Say three materials A in Div 01,B in div 02 and C in div 03
Now your order for material A is no problem as the header div and item div are same both 01 and 01
Now your order for material B then there is problem as the header div 01 and item div 02 differs
In this case if you want to save the order then there should be a ship to party in sales area 1000,10,02 who is assigned to this customer X (SP) in the sales area 1000,10,01 or alternatively you have to extend this customer X who is in sales area 1000,10,01 to sales area 1000,10,02 also in XD01
Same is the case for material C
To do smooth processing of your sales order check div should be BLANK in VOV8
Item div not to be ticked in VOV8
CMR should be extended to all sales areas
It is better to leave item div unticked and check div blank then the header div and item div are allowed to vary in sales orders and remember to tick business data at item category so that at item level also bothe can vary
Common div will not work in your case as it will not check the MMR as the division is a field in MMR not an organizational unt
In VOR2 itself you can see it is for conditions and customers only
The same is the qn of Mr.Pankaj a few days back and i remember your post regarding my answer
What is exactly the problem you have?
Regards
Raja

Sales Order with different sold to party & ship to party

Hi experts,
We have one sold to party customer code DE0009 . There is no other ship to party code assigned with this customer in the masters. but still user can make Sales order with Sold to party DE0009 & another ship to party code ( DN0020 ) which is not assigned.
Ideally , system should restrict it .
Please guide us how to control.
Regards,
( Rajneesh Gulati )

Hello Rajneesh Gulati,
Ship-to party doesn't have to be assigned to the sold-to party in the master data.
You can kindly refer to Note 380507 which can provides you with more info.
Best regards,
Miri Shimony
Solution Management
Globalization Services

Transfer posting to special stock sales order with different material

I am able to MB1B a material (Transfer posting) using mvt 412 E and transfer from own stock to sales order stock ,where Sales order belongs to a different material.
It should not allow posting to a "E" stock to a sales order of different material. (anyway system allows that without any warning/error?)
MB1B:Only stock type change (within same storage location).

Hi ,
I tried replicating your Query and observed it as a standard Behaviour
When you use 412 E for posting stock to sales order , system is not validating whether the Material is available in Sales order or
Material Check is only happening against the Plant and storage location but not at sales order level
if you want the check to happen, may be you can try to put a code in this Include
MGV_MATNR_LAMA_SAPLMATL which will Read the Material
regards,
santosh

Replication of Sales order with Credit Card data from CRM to R/3

Hi,
We are on CRM 4.0 version.
We are getting the sales order management system implemented in CRM 4.0.
Simulation for credit card authorization has been set up CRM system.
When we maintain the credit card in the sales order,the replication does not take place.The outbound Queue in the R/3 system is getting stuck with the error 'VBERROR'.
Can you please advice if we can replicate the sales order with the credit card maintained on them to R/3 system.
thanks
Meraj

Hi Bokhal,
Please consider my answer from your recent thread dealing with apparently the same issue :
Hi Bhokal,
For filters in uploads please consider below:
For Filtering the BP-upload, use the Administration Console
(tx. SMOEAC) in the corresponding subscription of the "All Business
Partners (MESG)" publication assigned to the R/3 site.
Some publications (and the replication objects they are based on) are
delivered as type "Simple bulk" which does not give you the opportunity
to assign criteria values for filtering.
You might have to re-create the publication. To do that:
1) First delete the subscriptions "All Business Partners (MESG)" and its
publications & the replication object.
2) Recreate the replication object as type "Simple intelligent".
3) Afterwards you can create a new publication via wizard of type
"Simple intelligent (msg)" assigned to the BDOC-Type BUPA_MAIN. Then,
you will be able to select some "filter criteria".
The reason for deleting the "old" publication is, that you
are not allowed to assign a BDOC-Type to more than one publication.
4) But please keep in mind that there is no realignment supported. So
you should only use fields for filtering, which cannot be changed
afterwards.
This is the "simple" solution for filtering on fields. This
will not provide complex filter criteria.
If you need this, you shall create a filter function in R/3- and/or
CRM-Inbound and -outbound.
If you want to keep the control about the upload trigger, you can add an
additional module in transaction CRMC_BUT_CALL_FU, position > 200000.
BUPA_MWX_BDOC_BPS_FILL_CENTRAL. Within this new module, you can delete
all partners within the complex structure that you don't want to upload.
Hoping that above will be helpful.
Best regards
Christophe Sturzel

APO atp on sales orders with complete delivery.

Hello all.
We run ATP in APO for sales orders on a lot of products. Often a sales order will contain many different products & often Complete delivery will be chosen. When we do the ATP check one of the products may have a long delivery time compared to the rest of the products on the order, and since we have chosen complete delivery the delivery date for the entire order will be pushed back.
Is there a way to find out which of the products in a given order causes the delay or do we have to have something coded you think?
As is the users have to remove complete delivery and then do the ATP for each of the products to find out and that's expensive timewise.
Any ideas welcome.
Regards
Simon Pedersen.

Hi Simon,
Is there any specific reason to choose "complete delivery" option. You can use delivery proposal option and this will provide delivery date to each schedule line as per material availability.
In R3 go to SPRO->Sales and distribution->baisc function->Availability Check and Transfer of Requirements->Availability Check->Availability Check with ATP Logic or Against Planning->Define Default Settings In this transaction maintain availability check rule as "C"
Regrds,
Vaibhav

Is it possible to create outbound delivery for sales order with FM: GN_DEL*

Hi all,
Is it possible to create an outbound delivery for a sales order using the FM: GN_DELIVERY_CREATE. I am choosing this over a BAPI as I also needed to fill the bill of lading and inco terms.
Thanks

Hi Gurus, is there any function module / Bapi that updates the BOL in a outbound delivery header created for a sales order

Sales Order with different Profit Center

Hi All Experts,
   In material master, i was created profit center PBB2K for part A but it is showing different profit center when sales order created
   Please kindly advise why different profit center show in sales order?
   Thanks
Regards,
shirley

Hi ,
check 0KEM for any sales order substitution for profit center.
In genreral the material master profit center defaults to profit center , But at sales order you can change the profit center other wise check 0KEM
If helpful asign points.
regards
Prabhat

Sales order with differing order UoM and pricing UoM

Hi
I need to create a sales order where the unit of measurement for the ordered quantity differs from the unit of measurement in the pricing condition PR00. This works fine if you have a fixed conversion, because you can simply set up the conversion in the material master of the sold material. My problem is that this conversion is flexible and can be changed by the sales representative. How do I do this? I remember that this isn't a problem at all in MM-purchase orders, you simply enter the conversion in the conditions tab directly. That doesn't seem to work in sales. Any hints?
Example for spreading services for farming.
Sales order for service "spreading", order qty = 17.600 HA, price = 21.00 GBP per 1 KGH (kilogram per hectar), conversion = 17.600 HA = 723 KGH if 12.720 KG of fertilizer is spread on the field. Problem is that tonnage and the field size are changeable. As well the theoretical application rate of 723KGH can be overwritten manually as required.
thx
Bj

Make sure the quantity conversion flags are checked, and then allow manual condition processing. This should open up the fields to allow for manual adjustment of the quantity relationship.
You will still need to maintain a default UoM ratio that will be proposed on the sales order, but that relationship will then be able to be changed at order entry time (or after save in change mode).
Bill Wood

Purchase requisition to purchase order with different delivery dates

Hi, Could any body explaon me , when ever a Purchase order is created with ref to purchase requisition the delivery dates can not be split up .(system shows an error message : error in net px calculation).
Please revert back with your suggestions.
Regards
Bheema

Enable 'Del Date' in Form Settings of the Delivery.
In the First Row, select the Item, Qty 5 and type Del Date Immediately
In the Second Row, select the Same Item, Qty 10 and type Del Date after 10 Days
In the Thrid Row, select the Same Item, Qty 5 and type Del Date after 15 Days

Partial Delivery in Sales Order with Different Delivery Dates

Similar Messages

Maybe you are looking for