Partner field in Sales Order should be greyed out

How can I do the configuration for making a particular partner in Partner Tab of a specific Sales order type greyed out so that it is not open for change

Follow the following steps:
1. Go to transaction "VOPA", next select the radio button for sales document header.
2. Click on Partner procedures [F6]. Select the procedure which is assigned to the sales document.
3. Click on Procedure details [F2].
This would gives you all the partner assigned to this procedure in turn attached to the sales document. One can make configure the partner as "Changeable", Mandatory, etc.
Regards,
Gauravjit.
Reward Points if solution is helpful.

Similar Messages

Sales Order Header Conditions greyed out

Hi All,
For two Sales Organisations and for two Order types (QT and Order) few of the condtion types (Header Condtions) are automatically coming as empty values (0.00) and are greyed out while creating a sales order / Quotaion. Now if user wants to change these values, he has to re-enter the conditions again and give some value (Discount/Freight). Therefore, there are two same condtion types in the sales order / Quotation (one greyed out with empty value and other which user manually entered).
Now my question is, why the system is taking the empty values and why the condtion type is getting greyed out? Can I debug it? if yes, where should i keep the break point or which user exit i need to check the logic (am sure it cannot be controlled by configurations).
Awaiting ur replies.
Thanking you in advance.
Cheers,
Anil.

Hi Ram,
Thanks for patiently replying to my questiosns.
As these are Header condtions no access sequence is maintained. More over, when i try to create a condtion record for these condtion type, system throws me the error.
Am sure it has nothing to do with our standard customizing and must have some logic behind it. But how and where to investigate it? at what part of program i need to debug? which user exit should i refer??

For LUMF - BOM, Plant field in Sales Order should be editable for TAP

Dear Gurus,
I have the following requirement.
Requirement...
TheComponent level BOM (LUMF) should be exploded in sales order with one by default plant when iI enter the main component in Sales order but if I want to change the plant of main item manually system should allow me in order change mode. And this changed plant to be determined automatically for all the components of that BOM.
As we know if we maintain the BOM at component level we will use the Itm Catg Grp "LUMF" so the pricing will be determined on the component level.
In CS01 we maintain the BOM for a main item. I have followed the same process in CS01 by entering Main Item material, Plant and BOM usage (5). whenever i enter the main item in sales order it explodes correctly with components, quantity and Plant.
The Plant field for main item (TAP itm Catg) becomes gray. But now my query is that if I want to change the plant of main item system is not allowing me as I have created BOM for a specific Plant. Same Bom I have maintained with other plants also
I know that We have one more option in CS01 like we can create a BOM without entering Plant also. But before I doing it for trial and error I want to know whether it will work for my latest requirement.
And what is the Group BOM ? how to use it? will it be helpful me in this requirement?
Please help me for the issue, I need to configure it as soon as possible.
regards,
Vojas

Dear Kapil,
Thanks for your suggestion i followed it also but yet I am facing the same problem.
I did as follows
I extended the Main item and components to the different plants.
And also created the same BOM for different plants in CS01.
After doing this if I create a Sales order and enter the Main Item with quantity system asks me for the Plant to explore the BOM, as i enter a plant BOM get explodes and the plant for main item becomes gray which i dont want. Any how I want the this plant field for main item in editable mode.
Let me explain my requirement in short
I maintain the LUMF BOM (Pricing at component level) .
once I enter the BOM material with quantity system should explode the bom with one plant by default. and in change mode of sales order the Plant for main item should be editable instead of gray mode. Becoz decision can be changed later on the delivering plant location.
Please suggest me. Its a high priority issue for me.
regards,
Vojas

Sales order sold to greyed out

Hi,
when i was practicing in IDES i found in sales order change view the sold to part field is grayed out and doesn't allow for change.
can any body help me out in making it to as normal change field.
Thanks
Reddy

Based on the scenario, you require to configure Partner function accordingly.
Normally in sales ordere, if you check not only sold to party, but other fields such as sales area .... are also greyed out.
However, if you want to configure Scenario: Sales order with dummy customer, you will require sold-to-party in editable mode.
You should refer to site: help.sap.com
SAP Best Practice --> Baseline Practice --> For Eg: Based on ECC 5.0 --> Select Country, say India --> Technical Information --> Building Block --> select Country, say India --> List of scenario's & basic configuration.
Regards,
Rajesh Banka

All fields in sales orders in display

Hi All,
Upon a certain condition, I need to make all fields in header and item of sales order as display(greyed out).
Can anyone let me know how this can be done.
Thanks in advance,
Regards,
Srikar
Message was edited by: Srikar Nagarajan

hi,
   it can be done through user exit. find suitable user exit for you Tcode and write code using SCREEN table for making the fields gray(display mode) .
try the exit : EXIT_SAPFV45S_002.
in the aboue exit header data will available in I_VBAK, but you have to check is it suitable for your reauirement or not.
the following are the exits available for sales order
Exit Name
SDTRM001
V45A0001
V45A0002
V45A0003
V45A0004
V45E0001
V45E0002
V45L0001
V45P0001
V45S0001
V45S0003
V45S0004
V45W0001
V46H0001
V60F0001
Sudheer.A
Message was edited by: sudheer Addepalli

Field GS_SCR_LIMIT-ONLY_INV should be 'greyed' out

When creating a Shopping Cart the radiobutton Invoice only(Field Name: GS_SCR_LIMIT-ONLY_INV) should be 'greyed' out. Can anybody let me know how can this be achieved by making changes to the HTML template SAPLBBP_SC_UI_ITS 210.

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Item category field in sale order screen to be greyed out

Dear Friends
While creating sale order I have a requirement to make item category field to be uneditable i.e greyed out .
How can I do that ?
Regards
Mahesh.

Hi,
Once there is any subsequent document to sales order item catagory field is going to be grayed out, till that time u can change ur item category. OR if u do nlt maintain manual item categories in the item category determination to ur sales document type it is not possible to change the item category other than the one u specified in the determination.
Regs,
Ravi Duggirala

Clearing the the street,Postal code and city in partner tab at sales order

Hi Experts,
I have a requirement like in sales order header or Item, In partners tab, when they are selecting the particular partner function like CR and the customer number is 500, and if they press enter then automaticaly it fetches the name,street,postal code and city at the right side for that entry. My requirement is like for particular customer 700, they want to hide the customer address in that Partner tab while sales order creation VA01. If they select the partner function CR and customer 700, after pressing enter, it shouldn't fetch the automatic address of that customer. They just want the customer name and remaining fields like street,postal code,city should be blank.
Can you please let me know how to reach this requirement ate sales order creation or change level in partner function tab.
I test these exits EXIT_SAPLV09A_001 to EXIT_SAPLV09A_004 but no use. Let me know possible ways to achieve this?
Any idea on these?
Thanks in advance ,
Edited by: dolly B on Jan 18, 2010 11:36 AM

Hi,
This is happening because you have not maintained your data in sales order.
Billing document takes the reference of order and delivery document for taking the data.
Now if you donu2019t maintain your partner function in order nor in delivery then it wont be determine in billing document.
If you want ZZ to shown in billing document then you have to make that function visible in sales order.
While creating sales order it will take it from customer master data but when you are creating billing it wont search in customer master data it will search in sales order only.
You can do one thing make that function non modifiable in partner determination procedure.
So it cant be change in sales order.
But I want to know why you want that should not be visible in sales order.
Hope so I will be correct with my explanation.
Regards
Raj.

How to include a new Z Partner Function in Sales order header drop down lis

Hello SAP experts,
We have come up with a new requirement to include a custom Partner Function-ZI in dropdown of SO header-Partners field.
Current scenario- Presently we are maintaining this partner function ( Say ZI- Institute ) in customer master data-Sales area tab.There could be more than one partners under this PF in master data. While entering sales Order, all partners associated are displayed in Header- partners tab, where only SP, SH, BP, PY partner functions are displayed.
Requirement- 1. Is to provide Drop down of this ZI-Institute partner function (which I did not find presently) in SO header-partners field and user should be able to provide one of partner function as available in Customer master ( as there are more than one partners that can be set in Customer master data but user need to be able to provide ONE of this ZI partner fucntion in DROPDOWN of PF tab in SO header ).
2. In addition, How can I link this new partner function in related sales reports against that particulat order and invoice?
Kindly suggest your valuable inputs as what should be the procedure to get this.
Many thanks in advance.

Hi,
Go to partner determination by VOPA
OR
IMG >> SD >> Basic function >> Set up partner functions >> set up partner function for sales document header
click on partner function and Maintain partner function ZI and back
Then select your existing partner determination procedure (Standard is TA) and click on PARTNER FUNCTIONS IN PROCEDURE and add partner function. and make it mandatory so even user forget to mention then at the time of saving system can remind user
Then double click on PARTNER DETERMINATION PROCEDURE ASSIGNMENT
Assign partner procedure to sales document
Now when you creating sales order go to header partner tab and enter you institute partner number
For sales order and invoice report
Execute this report by selecting partner function ZI in VA05N and VF05 respectively
kapil

Customer wants to see Discount Field and Quantity field in Sales order Form

Hi Gurus,
Highly appreciate if you provide the solution for below issue:
My customer requirement is to see Discount field in sales order lines screen...They want to know how much percentage of discount they are giving to customer, if they want to modify for respective line they modify in that field.
Standard functionality discount field is NOT there in SO lines for because they manual enter discount in SO form, system should calculate Discounted price.
One more required if they enter Item code, able to see available quantity bottom of the form Sub inventory wise, Availability, resealable.
Current standard functionality supports - Click Availability button to check the availability..Its very difficult for them to check for each and every line item, is there any functionality to support this issue.
Thanks
Satti

Hi,
Both of your requirements should be customised.
There is no standard functionality which attains your requirements.
For my present project, we have customised 2 seperate reports, one which shows the availability of the items in subinventory and locator.
Also a report which shows discount for all the lines and for the entire order.
Thanks
-Arif.

Create a new field in sales order

HI folks i want to create a new field in sales order item level how can i create

Hi,
Hope this will help you,
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.

Can we edit Gross Price field in Sales Order

Hi experts,
According Help document (help - under Sales A/R/Sales Order-Sales document content tab ) as follows, userwe should be able to edit gross price field in Sales order
Enter in this field the unit price including tax. SAP Business One calculates automatically the unit price before tax and the tax amount, based on the tax code in the row. After pressing the TAB key, the Unit Price field and the Tax/Unit field are updated accordingly.
The tax amount is calculated as follows:
*Gross Price / (1 + Tax %) * Tax % = Tax Amount*
But when I set up in form setting visible and active for Gross Price, though I AM NOT ABLE TO EDIT GROSS PRICE FIELD
Is it bug in SAP ? I
BR
Samir Gandhi

Hi Samir Gandhi,
You may check SAP Note Number: 1060666 to see if it applies to you.
Thanks,
Gordon

How to add three fields in Sales order item level and supress/hide many

Hi Gurus,
My client requirement is :
1. Three fields to be added at Sales order Item level and they should flow till billing.
2. Supress/hide most of the fields in Sales order, so that end user will be happy( thru SHDO how to do)
Please share your experiences and help me.
BEST REGARDS
Srikanth

Hi Subba Rao
in VA01 screen - Material /qty/ after entering this client wants to enter three more details say X/Y/Z
and after that he dont want to see maximum fields displayed in VA01 Screen.
I think it makes sense.
Regards
Srikanth

Multiple bill to partner function in sales order

How can a partner function be setup that it can appear more than once in a sales order ?
Need to make a sales orders with more than one "bill to partner". When I add the same partner function with another customer in the header of the sales order I get error message VPD012 : "partner function ZX can only occur 1 times in procedure ZEXP (sales document header) .
I searched OSS, and debugged for a while to try to find where that "1" is coming from.
In function SD_PCHECK_PARVW_COUNT_OK, a counter is set to "1" based on the field TPAER-PAREI (line 86). Allthough the flag "unique" is not set in partner function ZX, I get this error.
Some further in the function, there is the comment :
102 * currently uniqueness of a partner is mandatory in sales docs, so
103 * if no CAS-Doc, partner has to be unique if not AA or AW
Perhaps, in sales orders it is not at all possible to use multiple partners with the same partner function in sales orders ?
Anyone having experience with this ?
Thanks,

Hi Dries,
Even after you created your order you can maintain different bill to party.
Go to VA02 screen
Enter your order number.Enter.
Goto item details Partners tab:
Now all the details are in editable mode.enter your bill to party.Make sure your bill to party is in same sales area and company code as of sold to party.After entering the taxes will be redetermined message will come.
Enter.
Save.
Now You do the same for all other items.
Regards,
Mohan.

Partner selection at sales order entry: ship-to's flagged for deletion

Hi All,
I need some inputs for the following issue.
For Partner selection at sales order entry level: ship-to's flagged for deletion are also proposed as it is entered in customer master. I dont want to delete the ship-to's marked for deletion in the customer master.
In short - only the ship-to's that are not marked for deletion should get populated.
Kindly suggest if there is an userexit for the same.
Regards
KCB

Hi,
You can try Blocking option for the particular Ship to Party.
But this will not disable it appearing in the Partner Function Selection Pop up.
Once you block it; though it appear in the selection pop up, you cannot select & proceed, as it gives a error message.
You can set this block in 2 ways.
1 - Tx: XD05
Go to the Tx give the customer number, sales area & Pres enter.
There you can set different type of blocks depend on your scenario.
Save
2 - Tx: XD02
Go to TX, Give the Customer number (Ship to Party) & go in. Since you have marked him as a delete, you'll get a warning message there too.
Select Menu option -> Extras -> Blocking Data
You'll coime to the same screen as above.
Maintain relevant blocks & Save
Check whether it satisfy your requirement.
Best regards,
Anupa

Partner field in Sales Order should be greyed out

Similar Messages

Maybe you are looking for