Pension payment period record issue in Retiree Payroll

Dear Experts,
We are implementing Retiree payroll with new set of wagetypes and payroll area. Now requirement is that there needs to be a provision of recording the balance period of pension payment and further it should be displayed in the form of report. That means say employee has the eligibility of receiving pension from 01.12.1998 to 14.11.2015 and he has received it till Oct, 2010, remaining balance period needs to be projected in month and days like 60.14/98.12 etc.
Now please suggest how to achieve it, should we create a custom infotype for storing it or any other way is there.
Thanks and regards
Tan

It is Indian payroll.
Requirement is to store the balance period of pension payment, like if one employee is eligible to get pension ( as per our pension benefit scheme) for 10 years 3months 15 days since his retirement date and has already received for 36 months i.e. 3years, we need to store and display that he is eligible to get pension for another 7years 3months 15 days in 87.15 format (i.e. 7*12+3= 87months and 15days) on monthly basis.
This will be also captured in a report later on.
Please suggest
Regards
Tan

Similar Messages

Control record issue !

Hi All,
I am handling UK Payroll and got an issues related to payroll run and control record,
Issue 1: The payroll driver (RPCALCG0) has skipped around 1500 Employees against payroll run for particular period
Issue 2: How control record allowed user to Exit control record for period in which EE's skipped in payroll
Please provide your valuable suggesting in regard to resolve the above two issues,
Thanks in advance.
Regards,
Devendra Reddy D.

Hi,
Issue 1: The payroll driver (RPCALCG0) has skipped around 1500 Employees against payroll run for particular period
Say you want to run payroll for FEB..
But payroll control record may not be in FEB... It may be in March..
Issue 2: How control record allowed user to Exit control record for period in which EE's skipped in payroll
Payroll control record may have been deleted on the month of Jan..& been set in Release mode in March month directly...
So feb month gets skipped & Exit mode in Feb is skipped too...
For detailed info.. Go to PA03 enter payroll ares & click display option..
Under Go To tab.. look for Control Record Log..
Regards,
Veeram

PENSION PAYMENT INDIA

Friends,
My client want to pay pension to some senior retired officers from company fund. (Other than pension trust) For this I have created one wage type and maintained in IT0569 and table V-T512Z (Permitted wagetypes).
When I am trying to run payroll for the employee, an error message coming "No record in Info Type 0007" .
The employee is already retired but we are using the same personal No, addresses, bank details for that employee, if an employee retires then no need of maintaining Infotype 0007.
Please guide me to overcome this issue.
Regards
Pratyush

Hi Hemant,
Thanks for the reply.
This is not one time pension payment. Company wants to pay monthly pension.
If we delimit planned working hours IT0007 to employee's termination date then while running payroll system showing message in the payrol log selected personnel No as '1' Successful '0'
In infotype 0003 I have entered the date 31.12.9999 in the feild Run payroll up to
Please explain.
Regards
Pratyush

Performance issue in HR Payroll Report

Hi Experts
I having performance issue in HR payroll report
My issue as follows
I have selection period to select date range
if I select start date & end date Which is giving EMP name, wage type,wage text, amount, etc
whenever I excute it takes morethan one hour to get the resust
my code is some wht like this
loop at GT_REDIR where
begda(start date) ge pnpbegda and
endat(end date) le pnpendat and
paytyp eq ''
move gt-sqnr to lv_sqnr
call function PYXX_READ_PAYROLL_RESULT
here i am passing pernr and sequence number
please give me some idea to fix this issue
Thanks in Advance
Gopinath Subramanyam

Hi Jhings
Thanks for Your immediate reply
data is coming from cluster table and also I am using Logical database
I will post my code here soon
Regards
Gopinath subramayam

Error posting asset to company ''Specify payment period baseline date''

Hi All,
Please some can advise on the below error msg.
While posting the asset in to company I will get error like ''Specify payment period baseline date'' and i cant go further.
Please advise ASAP.
Many Thanks
Balaji A S

Dear:
This error message normally appears if In the payment terms that you are using (can be seen in OBB8) there is no any default date assigned to the payment term. If it is then assign one like Posting Date or Document Date in OBB8 against the payment term you using. I am a bot confused in your case that why are you getting this error while acquiring the asset. Would you please elaborate the process you are using for asset acquisition.
Regards

Payment cancellation records with debit amount 0 can't be extracted to BW?

Payment cancellation records with debit amount 0 can't be extracted to BW?
We use 0FI_AP_4 to extract R3 data to an ODS. We restrict the data selection in the ODS start routine of update rule to select company code range and accounting document types. Today R3 people added one new accounting document type with 10 records generated. Run RSA3 can see the 10 records with new accounting document types. But somehow the 10 new records can't be brought into BW and we have tried many different ways by even just restrict company code range inside the start routine, but still not helpful. All other document type records can be brought in except the 10 new records for the new document types which reflect payment cancellation. We run RSA3 to compare the field value difference between the new doc type and other types, find the difference is on the debit amount value that all the new records debit amount values are null but with positive credit values and other doc types of records are the opposite that their debit amounts are positive and their credit amounts are 0. The new records are not even in PSA.
Is this the way SAP set up that only debit amount with values can be extracted to BW?
Thanks
Message was edited by: Kevin Smith

hi Diego,
We have tried almost everything like refresh the load from Initial, but still no help.
A hint is that R3 people posted the records today which is 8/18 and the variant they used is V6 (July - June, 4 +1 year), the fiscal year for these new records are 2007. The problem we found is on DEV and we found actually all transactions in the fiscal year 2007 have failed to be extracted to our DEV BW, but on our TEST system, all the transactions in the fiscal year 2007 have been extracted to BW.
Any idea?
Thanks

Customer payment history record error

Hi
I have a query related to the customer payment history record.
Actually in customer master data I have not click in payment history record check box field, thats why system not calculated customer payment history in report S_ALR_87012177 and table KNB4. But after when i click on payment history recor , then when I create a invoice and payment system calculate the data in customer payment history record.and table.
My query is How to display the data in payment history reocrd which was enetered before the before the check box payment history was enable in customer master
Please advise
Stop Cross-Posting

Hi,
Customer payment history record is not getting displayed. We have selected payment history check box in customer master, but payment records prior to enabling customer history check box are not getting displayed.
Is there a way to display customer payment history records prior to enabling customer payment history check box in customer master

Error on invoice "specify payment period baseline date".

Hi Experts,
When I create ZMIRO, ZMIRO it keeps
asking for a baseline date which we have never had to do before
Payment terms filled blank, but teh system throughs error message "specify payment period baseline date".
I
Please help.
Thanks,

Dear,
System will want to calculate due for payment to vendor for this invoice it must know baseline date from which it should start calculating the due date. Generally baseline date is determined from payment term but it is empty in your case. Enter a payment term in vendor master so that system will default the baseline date from settings done in payment term.
Baseline date has to exist in the invoice document.
Regards,
Chintan Joshi

G/l master record issue

HI Gurus,
i have some issues in g/l master record issue,
1what is TRANSFER and REVALUATION of new g/l.regards
jana

Revaluations : at a particular date(month end/ year end) we revaluate our foreign currency balances and open items, that time system posts forex gain/loss entries.
be clear whenever you ask questions in the forum.
i couldn't understand your requirement.

Soundbooth CS4 MacBook Line In Recording Issue

I have looked through all the forums and not found a working solution to my problem.
After recent complete re-install of both OS X and my entire Adobe Suite, I am no longer able to record in SouthBooth using the Line In option.
It ALWAYS continues to record the built in microphone.
I have gone into the OS X Preferences and set Line In as Input Device and it detects and responds just fine.
In SoundBooth I open the Preferences and select the Line In option as well and designate it in the recording pop up window too. But still, it records the built in microphone.
It didn't do this before. Everything used to work properly. So I am curious if something went foul when installing SoundBooth and if I should re-install it? Or is there a known update / patch that addresses recording issues?
I'm running OS X 10.6.8 and SoundBooth CS4 2.0.1
Thanks for any help you all have!
Jeremy

try muting the built in mic.

Pension payment India Payroll

Dear Gurus,
When we change the status as retiree and we need to pay pension why cant we pay through IT0008 and need to pay through IT0014/15.
Also in case of death of the employee pension needs to be paid to nominee.Now where do we maintain nominee bank details.Since IT0009 is basically for employee data can we store nominee bank details also here.
Please advice.

Hi,
1-Copy IT0008 from the date of retirement ie if retired on 31.07.2011,copy from 01.08.2011 and make the record as blank so that no amount is displayed if he comes in normal payroll. OR
2-Maintain IT0003 column Run payroll upto till 31.07.2011.OR
3-Maintain IT 0001 payroll area separately so that he is not included in other payroll.
If these match your scenario check if not again post your query if any.
Salil

Down payments country spec. issue

This is one more country specific posting problem and it is related to down payment processing. When I receive down payment from customer I have to report it on separate GL account (DP on current assets). But difference then standard settings is that I have to report VAT in down payments on separate GL account too. So, postings are like this:
430 DP on current assets -118;
241 Bank account 118;
472 VAT in down payments - 18;
289 Clearing VAT in DP 18;
Next step is when I issue invoice to customer, I have regular posting;
202 Customer recon. account 118;
602 Sales revenue -100;
470 VAT in invoices - 18;
When I do clearing, system is doing this postings for me:
430 DP on current assets 118;
202 Customer receon. account -118;
472 VAT in down payments 18;
289 Clearing VAT in DP - 18;
So, when invoice and down payment are occurring in same month this approach is correct, because in VAT report I need to show VAT in outgoing invoices. But, problem is when I have down payment in one, and invoice in other month (fiscal period). When this situation occurs I have to pay VAT based on down payment and not based on issued invoice. So, in this case posting should look like this:
430 DP on current assets 118;
202 Customer recon. account -118;
470 VAT in invoices 18; (because VAT is paid in previous month based on down payment and that account should not have a balance!!!)
289 Clearing VAT in DP - 18;
I really can not see how to configure system to behave like this only in case if different periods. Has anybody any idea?
Thanks in advance

Because of the legal requirements. If down payment is in one, and invoice is in other period (month) it is shown as two separate items on VAT report, and also it has to be on two separate accounts. I know that in both cases I will have correct VAT amount (tell it to our gouverment), and my question is not at all about calculation of any amount. Problem is, for i.e, if we didn't send invoice and we have to pay taxes to goverment, then postings are simmilar to this:
472 VAT in down payments 18;
241 Bank account -18;
So, when I (or tax inspector) look at account 472, I can see that I don't have anything to pay anymore, balance is zero.
But if I in next month I issue invoice and do clearing with regular SAP procedure, I will have following posting:
430 DP on current assets 118;
202 Customer recon. account -118;
472 VAT in down payments 18;
289 Clearing VAT in DP - 18;
So, when I look in account 472, I will see balance of 18 on debit side from current month. That posting does not belong on that account at all in next period because I already payed taxes based on down payments in previous month.
I found one solution, during closing, I need to post 472 credit and 470 debit, effect is like reversing 472. But this is something I would like to avoid, and I'm not sure how it would be possible to do it during F.13...
Substitution seems to me as cleanest solution, but don't see how it would occur...

Automatic Intercompany Payment/Collection postings Issue

Hi All,
We have an intercompany scenario where we need to make actual payments between two company codes: Both the Company Codes are in SAP and in Same Client.
1) Intercompany receivables in company code A matching payables in company code B.
2) Payment run in company code B generates a payment from company B to company code A.
3) This payment run is supposed to create 2 idocs, 1. Out bound Idoc in Company B 2. Inbound Idoc. Which triggers a Posting (Dr. Bank Transitory Cr. Interco. Customer)
I am able to generate the Outbound Idoc through F110 (Payment Run). But inbound Idoc. is not getting generated in Company A. I managed to post an incoming payment advice IDOC using the test tool WE19. I just copied the outbound IDoc changed the sending / receiving ports etc, and changed the direction field in the control record- it posted without problems.
Necessary settings have been maintained in WE20, OBCA and OBDG and also in the Posting Rule. But I am still not successful in creating an incoming idoc. through F110.
WE20- Message Type REMADV & IDoc Type used is PEXR2002.
kindly share the details
Thanks & Regards,
Vikram K

Dear:
I guess you trying to tell that your company code deals with a customer A who
is your vendor B and that you want to set off your receivables
against dues owed by you? If yes then please proceed as under
I assume that your company code is yet to collect 600 $ from customer A
whereas you owe 800 $ to vendor B.
In customer master (control data screen), activate
a check box called vendor (T Code:FD02 or XD02)
Similarly, activate the check box called customer in the vendor master
screen(T Code :FK02 or XK02)
By doing so you have let SAP system know that your
customer A is also vendor B. You have done this at client level and this
relationship applies to all company codes dealing with customer A and vendor
B which is your basic requirement.
Now move on to the company code section of your customer master ( T code
FD02 or XD02) and activate a check box called clearing with vendor. Do the same thing with
your vendor master (T Code FK02 or XK02) and activate a check box called clearing
with customer.
This means that your company code wishes to set off receivables from
customer A against dues payable to your vendor B.
In F110 now you would be paying 200 $ to vendor B.
Hopefully this will resolve your issue.
Regards

Grace period calculation Issue

Hi Gurus,
in oba3 i created a tolerance group for which the grace period is 3.
i assigned this tolerance group to my customer,so that the due date is extended to 3 days from the due date.
i have a payment term which gives 5% cash discount when paid within 15 days and item due in 15 days.
i have a customer invoice whose baseline date is 18.08.2010. The item should be due only on 18.08.2010 + 15 + 3 = 05.09.2010, with the cash discount.
05.09.2010 is a sunday.
my query is, my customer decides to pay the item on next business day,06.09.2010,monday and looses his cash discount. which should not have happend.
how can we solve this issue.ie, the due date calculation by adding grace period should exclude weekends and public holidays.
what i have tried is, maintaining entry in obba for my house bank which calculates the value date.
but it didn't prove succesufull. i am using f-28 to manually clear the customer invoice created using f-22.
someone sleep over this and help me
thanks and regards,
ficoguy.

Hi,
Try function module HOLIDAY_GET, snippet of code:
CALL FUNCTION 'HOLIDAY_GET'
       EXPORTING
            holiday_calendar           = 'ZA' - (Country e.g. South Africa)
            factory_calendar           = 'ZA' - (Country e.g. South Africa)
            date_from                      = HOLIDAY_DATE_FROM
            date_to                           = HOLIDAY_DATE_TO
       IMPORTING
            returncode                      = return_code
       TABLES
            holidays                          = holiday_tab
       EXCEPTIONS
            factory_calendar_not_found = 1
            holiday_calendar_not_found = 2
            date_has_invalid_format    = 3
            date_inconsistency         = 4
            OTHERS                     = 5.
Regards,
Vuyo

Payments throug Cheque Issue

We are using transcation F-58 and FBZ5 for cheque Printing.Have already gone through SDN -Google .
How F-58 is linked to SAP-script and Print programe (name ). How to find custamized programes with F-58.
I excuted a programe YRFFOUS_C with parameters :
Program run date
Identification feature
Paying company code
Sending company code
Business area
House bank
Account ID
Check lot number
YRFFOUS_C: No records selected
or
Production run 27.05.2011 00001 has not yet been carried out
Thanks & Regards

Thanks sir.
Plant is in india. All cheques are issued with same scenarios and all are giving correct amount ( 100000.00).
But when , payment cheque for NEPAL it is giving (100.000,00)
It's only for one customer.
I cheked the user settings SU01 : 1,234,567.89
and also checked T005X table
India
Decimal point format   X
date format               1
Nepal
Decimal point format
date format               1
And in script there is no SET COUNTRY COMAND used.
Thanks & Regards

Pension payment period record issue in Retiree Payroll

Similar Messages

Maybe you are looking for