PO processing Time report

Hi Experts,
Do we have any STD report - which will show PO processing time (in days) -{ from PO date till GR date} per PO??
Regards,
Jackie

Hi,
As such there is no report to list out the days for PO processing to GR. But by executing the reports  which will give you GR for PO and observe the number of dayas taken from creation of PO to Goods receipt in to the inventory. Try MC$4 and MC$G in this regard. Alternatively can try ME2L, ME2M and ME80FN. Thanking you.

Similar Messages

  • MDG CR processing time report

    Hi
    Is there any option in MDG to download the CR processing time , Like Creation time, approved time and activation time of the CR.
    display change request option shows creation and finalized time only.
    thanks in advance
    Regards
    syam

    Hi Syam
    It is available under link as below

  • How to show the processing time taken for a BPEL process in BAM report.

    Hi All,
    I have the data as below in the Data object. I would like to show the time taken for each order to complete in the report.
    instance Id     order Id     product Name     product Code     price     status     instance Time      updaterName
    1360010     ord004     Guitar     prod003     2000     requested     9/22/2008 12:12:11 PM     Invoke_InsertSalesOrder
    1360010     ord004     Guitar     prod003     2000     Approved     9/22/2008 12:15:11 PM     Invoke_OrderStatusUpdate
    This data comes from simple BPEL process where sensors are configured at the start and end of BPEL process. Also have a human task activity in between to create the time difference.
    In Enterprise link design studio, I tried to calculate the time difference using expression calculator and store it as calculated field. But that doesn't seems to work because when I execute the plan, second sensor data reaches only after human approval whereas first sensor data would be waiting for calculation and ultimately nothing comes into data object.
    How and where the calculation be done to show the processing time in the report. Please someone throw some light on this.
    Regards
    Jude.
    Edited by: user600726 on Sep 30, 2008 1:30 AM

    I would suggest modifying your data object so that the data can all be in a single row and use the sensor at the end of the process to upsert (update) the row created by the sensor at the start of the process. The time difference between two fields in the same row is then an easy calculation on a BAM report -- No EL plan should be needed.

  • How to reduce process time in report

    Hi all..
    Is there any technique to reduce process time in report on programmer side??
    Plz help me...

    Hi
    check this and ensure that your code is as per the stds
    1) Dont use nested select statements
    2) If possible use for all entries in addition
    3) In the where addition make sure you give all the primary key
    4) Use Index for the selection criteria.
    5) You can also use inner joins
    6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
    7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
    ABAP performance depends upon various factors and in devicded in three parts:
    1. Database
    2. ABAP
    3. System
    Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
    u can get an interactive grap in SE30 regarding this with a file.
    also if u find runtime of parts of codes then use :
    Switch on RTA Dynamically within ABAP Code
    *To turn runtim analysis on within ABAP code insert the following code
    SET RUN TIME ANALYZER ON.
    *To turn runtim analysis off within ABAP code insert the following code
    SET RUN TIME ANALYZER OFF.
    Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
    Avoid for all entries in JOINS
    Try to avoid joins and use FOR ALL ENTRIES.
    Try to restrict the joins to 1 level only ie only for tables
    Avoid using Select *.
    Avoid having multiple Selects from the same table in the same object.
    Try to minimize the number of variables to save memory.
    The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
    Avoid creation of index as far as possible
    Avoid operators like <>, > , < & like % in where clause conditions
    Avoid select/select single statements in loops.
    Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
    Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
    Avoid using ORDER BY in selects
    Avoid Nested Selects
    Avoid Nested Loops of Internal Tables
    Try to use FIELD SYMBOLS.
    Try to avoid into Corresponding Fields of
    Avoid using Select Distinct, Use DELETE ADJACENT
    Check the following Links
    Re: performance tuning
    Re: Performance tuning of program
    http://www.sapgenie.com/abap/performance.htm
    http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
    check the below link
    http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
    See the following link if it's any help:
    http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
    Check also http://service.sap.com/performance
    and
    books like
    http://www.sap-press.com/product.cfm?account=&product=H951
    http://www.sap-press.com/product.cfm?account=&product=H973
    http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
    http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
    Performance tuning for Data Selection Statement
    http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
    Debugger
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
    http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
    http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
    Run Time Analyser
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
    SQL trace
    http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
    CATT - Computer Aided Testing Too
    http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
    Test Workbench
    http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
    Coverage Analyser
    http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
    Runtime Monitor
    http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
    Memory Inspector
    http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
    ECATT - Extended Computer Aided testing tool.
    http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
    Just refer to these links...
    performance
    Performance
    Performance Guide
    performance issues...
    Performance Tuning
    Performance issues
    performance tuning
    performance tuning
    You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
    1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
    2 Avoid for all entries in JOINS
    3 Try to avoid joins and use FOR ALL ENTRIES.
    4 Try to restrict the joins to 1 level only ie only for 2 tables
    5 Avoid using Select *.
    6 Avoid having multiple Selects from the same table in the same object.
    7 Try to minimize the number of variables to save memory.
    8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
    9 Avoid creation of index as far as possible
    10 Avoid operators like <>, > , < & like % in where clause conditions
    11 Avoid select/select single statements in loops.
    12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
    13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
    14 Avoid using ORDER BY in selects
    15 Avoid Nested Selects
    16 Avoid Nested Loops of Internal Tables
    17 Try to use FIELD SYMBOLS.
    18 Try to avoid into Corresponding Fields of
    19 Avoid using Select Distinct, Use DELETE ADJACENT.
    Regards
    Anji

  • Why UPD processes execute report RSM13000 for very long time?

    Hi,
    When I use sm50 or sm51 to check my CRM system which version is 5.0, I found some UPD processes execute report RSM13000 for very long time. And some DIA processes are executing report SAPMSSY1 for verly long time too. They are occupy lot of processes of system. How does this happen? What's the reason and how to solve it? Thanks for your help!
    Many thanks and Best regards,
    Long

    Please check the configurtion of your system.As per your reply it seems that the work processes are not sufficient in the system.
    Hi wait time and response time  ,is  problem in the system.Either you have a lot of load on the system or you CPU's are over loaded.
    Please check the system status from st06 and look for the cpu utilisation /memory utilisation.
    SM66 to see the long running online and background jobs.
    St03n - look for the workload and wait times for all transactions.
    st02-may help in checking the memory paramaetrs.
    Hope it will help you in resolving the issue.
    Thanks
    Amit

  • Max processing time or Max records limit reached (Crystal Reports Server)

    Although my report runs fine from with Crystal Reports (designer), I get an error when I try to run it from the Crystal Reports Server portal.
    I get an error u201CMax processing time or Max records limit reachedu201D.
    How can I solve this problem?
    Iu2019m accessing a DB2 database on an iSeries Server thru ODBC. I know that the report uses a lot of data. Therefore I have set u201Callow query timeout yesu201D within the ODBC data source. The data connection itself is not the problem, I have no problem running other reports on the same connection.
    PS. A do not know whether or not this is the right forum for my post. I first posted within "Java Development - BusinessObjects Enterprise, BusinessObjects Edge, Crystal Reports Server" but I did not get any response.

    I found the answer to my problem:
    1) Log onto the CMC
    2) Goto "Servers" in the dropdown menu
    3) Expand "Service Categories"
    4) Select "Crystal Reports Services
    5) In the right window will be listed the currently running services.  The 2 services that Dell mentioned are in there under "Description":  CrystalReportsProcessingServer and CrystalReports2013ProcessingServer
    Hope this helps somebody else.

  • How to calculate the Processing time for material based on its route ?

    Hello experts,
    I would like to calculate the Scheduled in-house production time based on route.
    Actually this is done in the prod. route in tcode CA02. (via menu Extras => scheduling => schedule).
    After getting the schedule table press the 'scheduling results' button I received the Processing time, Setup and teardown time,... Scheduled in-house production time.
    So I'm looking for a function or any tool to use it in report.
    thanks,
    Eli

    hi,
    from routing screen,extras>scheduling>schedule(give a variant name)>scheduling results>update material master.this writes the info in the temp file.use tcode CA96 to update material master.this updates lot size dependent in house production time in work scheduling view of material master and  deletes the lot size independent inhouse prod, time in MRP2 view.this tool gives more accurate results  for your  inhouse prod. time.
    > Hello experts,
    > I would like to calculate the Scheduled in-house
    > production time based on route.
    > Actually this is done in the prod. route in tcode
    > CA02. (via menu Extras => scheduling => schedule).
    > After getting the schedule table press the
    > 'scheduling results' button I received the Processing
    > time, Setup and teardown time,... Scheduled in-house
    > production time.
    > So I'm looking for a function or any tool to use it
    > in report.
    >
    > thanks,
    > Eli

  • Purchase efficiency and processing time in purchasing

    Hi friends,
    here purchase efficiency they want to find out, please suggest me any report and please do let me know use of  processing time in purchasing
    Thanks and regards,
    Balakrishna R.V

    Processing time-
    It is the time required by buyer to convert PR into PO.
    You can maintain the Processing time on plant basis.
    The processing time is taken into account during the scheduling process for externally procured materials within the framework of materials planning and control
    for example- Planng time (to produce the material at vendor end)  + Processing time (time required by buyer) +GR processing (after receiving the material at plant) = the material available date ...Forward scheduling
    in reverse scheduleing it will bve otherway round to calculate the date on which I should communicate the vendor so that my schedules are met.
    You can see the details in SPRO > MM >Pur Req

  • Error in File IC Work Order Report_v3-3: Max processing time or Max records

    Hello Friends,
                          While running the Crystal report in Business Object Infoview, I am getting the below mentioned error when i am trying to go to the next page or trying to export all pages of report into PDF and any other format. I can see the first page in output and can export 1st page into PDF.
    2010-12-29 17:28:05
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error in File IC Work Order Report_v3-3:
    Max processing time or Max records limit reached---- Error code:-2147215357 Error code name:internal
         at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.getPage(Unknown Source)
         at com.businessobjects.report.web.event.q.a(Unknown Source)
         at com.businessobjects.report.web.event.q.a(Unknown Source)
         at com.businessobjects.report.web.event.bq.a(Unknown Source)
         at com.businessobjects.report.web.event.bt.broadcast(Unknown Source)
         at com.businessobjects.report.web.event.ak.a(Unknown Source)
         at com.businessobjects.report.web.a.p.if(Unknown Source)
         at com.businessobjects.report.web.e.a(Unknown Source)
         at com.businessobjects.report.web.e.a(Unknown Source)
         at com.businessobjects.report.web.e.if(Unknown Source)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerUpdater.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.do(Unknown Source)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
         at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
         at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
         at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
         at java.lang.Thread.run(Thread.java:595)
    Please Help.
    Thanks,
    Ziad Khan

    Ok it looks to me that there are more than 20000 rows in your backend system that have to be fetched.
    You can change this limit in the Central Management Console . Login as administrator and go to Servers . Double-click on the Crystal Processign server and change the value in the field Database Records Read When Previewing or Refreshing (0 for unlimited) according to your needs. AFter the change you have to restart the Crystal processing server.
    Regards,
    Stratos

  • What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?

    What is Microsoft's official policy regarding the processing time for HCK2.1 Driver Submissions?
    Can someone point me to a document that states the official policy stating their maximum review time?  This info used to be in the WLK1.6 FAQ but I don't see it for the HCK2.1 suite.
    Thanks!
    Al

    Ian,
    Thanks for your reply. Yes, I'm sure LabVIEW uses the (default) Windows timer. And yes, 1 mS is not guaranteed due to the preemptive nature of Windows (and even "RTOSs" to varying degrees), which is why I see about plus or minus 2 mS. 
    Apparently the Windows timer can be set by API calls. See: http://www.lucashale.com/timer-resolution/. Here's a screen shot of his TimerResolution.exe on a Windows 7 PC:
    Here it is on my Windows XP PC after I set it to "Maximum" (initially it was 15.625 mS):
    Notice that it sets the Maximum to less than 1 mS, which is supposed to be the max, so there are some bugs. Plus the Default button does not reset it in XP, but does work on Windows 7 or 8. (I know this is not the place to "debug" non-LabVIEW applications!)
    I'll bet LabVIEW sets it, too. The only caveat, as I said, is it looks like another application can change it, since the hardware timer is a "global" timer. I have not seen this issue in my LabVIEW applications, have you?
    I guess I need to do some more digging to see the code to set the timer, but it looks like the developers of LabVIEW have it figured it out.
    (FYI, I did notice that running my LabVIEW app (which gives about 2 mS resolution) or a C# app, which gives 15.625 mS resolution, does not affect what TimerResolution.exe reports, so I'm not sure if it's really working correctly. If I figure it out I'll post the results.)
    Ed

  • LTP run ignoring GR processing time and Lead time

    Hi,
    I am trying to find out way to create a planning scenario (MS31) and run LTP (MS01) which will ignore the GR processing times and Lead times from Material master.
    I would like to use MCEC report (after running MS70 valuation) which will show the values only in my new fiscal year - for budgeting purposes. Currently because of the long GR processing times and Lead times in material master (sometimes even 60 days) - some planned values show in MCEC report 2 or 3 months before the new fiscal year and the last two periods of new fiscla year are empty.
    I would be grateful if you could help me with getting rid of these additional Times and adjusting the periods only for Report purpose. The desired final output should be that S012 table for this specific planning scenario has the values only in periods of the Fiscal year - without hitting previous Fiscal year last periods (due to lead /GR processing times).
    Thank you,
    Karol
    Edited by: Karol on Oct 12, 2010 2:50 PM

    Dear,
    Master data is taken from normal MRP views. there is no other setting is available. you can create a different matrerial number for LTP planning.
    Raj

  • GR Processing Time

    Dear Experts,
    Is there any default report available in SAP in which it shows GR Processing time of any Material ?
    Thanks,
    Farrukh khan

    Hi
    GR Processing time data is stored in Purchasing and MRP2 view of material master at PLANT Level.
    So you can get this data from table MARC .I dont think any standard report gives this data.
    Regards
    Virender Singh

  • GR Processing Time on Inbound Delivery

    Hi,
    I Have a Material with GR Processing time  which was carried to my PO Well.
    When i Create a Confirmation for that PO and raised a Inbound Delivery against the PO.
    Now my GR Processing time Changes to 1 automatically in PO.
    Why?
    If it is Correct can u Explain?
    Tks/Rgds
    Ganapathysubramanian.V

    Hi Prasobh,
    I looked at the note 101262 and it seems that it is suggesting us to create a new Z report by copying existing report and then modify the WRITE Bloack in new report to display GR Time and Del. Time.
    Is my understanding correct? If yes can you share with me the steps in some more details then mentioned in note 101262 that I need to follow for addressing this requirement.
    If no can you suggest any solution that you know by which it is possible to include GR Time and Del. Time in CS11 output without Z development.
    Regards,

  • Error: Max processing time or Max records limit reached

    Hi All,
    While I run the report in Infoview, I get the below error:
    Unable to retrieve object:
    Max processing time or Max records limit reached
    Kindly suggest me.
    Thanks,
    Meena

    There is a default limit on the number of records returned and on the time out of an 'idle' connection..These could be set in the CMC , however first try to check the query for that report and see if it is applying your record selection criteria at the database level  ( use the Show Sql option and see if all your selection criteria have been turned into WHERE clauses)
    - this will drastically reduces both the number of records returned to the Crystal and the time it takes for...
    You can find setting here:
    CMC>servers>page server>properties
    Its always not recommended to set it to unlimited as page server is not a robust server, you need to schedule such reports that uses job server which is more robust.
    Regards,
    Parsa.

  • BPM Total Processing Time

    Hi,
    I am trying to calculate total processing time of the BPM. I am capturing start and the end time in BPM.Now the issue is that how di I get the difference between these two times Plesae let me know if you have any ideas on this. Also let me know is there any other standard way to acheive the same.
    Thanks
    Anand

    Hi,
    the standard way would be to use PMI (performance monitoring)
    but as far as I remember you cannot select a BPM name to monitor... only loose messsages
    BTW
    it even gives you the opportunity to save to data in a file... for audit for instance
    so the only way would be to try to create a report
    this data has to be stored somewhere...
    no other idea - sorry
    Regards,
    michal
    Message was edited by: Michal Krawczyk

Maybe you are looking for