Position has 2 users, work item has to go only 1 user

Hi All,
We have a business scenario where the position will have 2 users, however we need to send the workitem to only 1 user.
Please suggest ways to do this.
Thanks and Regards,
Soumya Gayatri.

Hi Soumya
We have a business scenario where the position will have 2 users, however we need to send the workitem to only 1 user.
  Even there are 2 user tagged to one position. There must be only one person would have got high priority to do their job. To get who has got high priority goto table HRP1001 enter these details in the table and check these
OTYPE    =  s
PLVAR    = 01
RSIGN     = A
RELAT     = 008
PRIOX      = 1
PROZT    = 100 %
If there are 2 persons tagged check the fields PRIOX and PROZT would be different for 2 persons. These field would be maintained by functional. Check this fields for  2 persons holding the same position.
Regards
vijay

Similar Messages

  • Work Items to PR Agents (Only one of two agents received)

    Dear all,
    I am facing a problem like this:
    In my PR Workflow, the task TS00007986 is assigned agents by position. There is one position applied for a particular release strategy and there are two agents under this position.
    Now, there is one PR created, it went to the correct release strategy and thus sent to the correct agent. However, only one of the agent is receiving that work item while the other don't. In another words, instead of sending to both the agents, only one received.
    In SWEL, the possible agents are showing both agents' names, but the icon "In User's Inbox" is only appearing on one of the agent.
    I would like to know, what would be the possible error for this and in such cases, how could I trace the errors?
    Thank you very much in all advances.

    Here's an update on this issue:
    For example, the two agents are Agent A and Agent B.
    I think Agent A and Agent B both received the work items. However, Agent A executed the work item but later canceled the action without processing the work item (approved or rejected the PR). When Agent A executed the work item, the same work item would be removed from Agent B's inbox, but it is still in Agent A's inbox.
    The problem is, the work item has yet to be processed. In this case, how this issue should be solved (only processed work item is removed from all the agents' inbox)?
    Thank you very much.

  • SRM Notification sent but user has not received the work item

    The notification is received by the user but the work item is not actually visible in the user's inbox.
    Please suggets what to do?

    Hi
    The user will receive the work-item in few cases only.
    1) Incase the manager has partially rejected the Document.
    2) Incase Buyer has made some changes to the Document.
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Need help in getting proposed approvers for a work item

    Hi All,
        We are trying to get the proposed approvers and the actual approver details for a particular work item.
    Before the work item is actioned we are able to see all the proposed agents for that particular work item.
    But once that work item is actioned then only the agen who has actioned on the work item is appearing in the list. All other agents are not appearing.
    For this we are using the FM BBP_WFL_DIN_APPR_WORKFLOW_GET.
    We have also tried some other FM's and tables, but none of them were helpfull.
    Please let us know if you know any table or FM or class which we can use to get these details.
    Scenario:
    Work Item: 12345    
    Before action on the work item
    Possible(Proposed) agents: Agent 1, Agent 2, Agent 3.
    Actual Agent: blank
    What we want, after action on the work item if "Agent 2" acts on that item.
    Possible(Proposed) agents: Agent 1, Agent 2, Agent 3.
    Actual Agent: Agent 2
    But what we are get is:
    Possible(Proposed) agents: Agent 2.
    Actual Agent: Agent 2
    Thanks a lot.
    Regards,
    Kranthi.

    Hi,
    What did you draw those lines with ???? Just a drawLine() command ????
    If so, it is very difficult to track the exact mouse coordinates that correspond to a click at a particular place and then place an 'X' or an 'O' there !!!!
    Try implementing it with 9 Buttons placed at those specific positions. In this case, it will be very simple to track the user's input when he clicks on any of those buttons...the implementation will become really simpler.
    Check it out !

  • Browse work item on WAS

    Hi,
    I would like to know how to browse work item through browser where WAS only installed in non-production environment.
    We deployed custom travel management application which was developed by using WD Java. Once user submits a trip request, work flow will be triggered in R3 and displayed in his Managers UWL inbox. This functionality only works in Prod environment as Portal installed.
    Is there any way to browse work item ..
    http://abcd.in.com:59100/webdynpro/dispatcher/mytrak.com/dc~travel/ApprovalApp?app.claims=n&app.wi_id= workitem_id
    Appreciate your inputs.
    Thank you,
    Ajay

    Hi Girish,
    I understood your problem.
    A method can be Synchronous or ASynchronous. You can check this by double clicking on the method in your business object (a check box for Synchronous ).
    If the method your calling is synchronous then inspite of creation or cancellation or any kind of action you take the workitem will be gone since its an Synchronous method.
    If the method is ASynchronous, the work item will be gone only when some conditions are satisfied.
    Now the question is how to set those conditions.
    1. Create your method as ASynchronous (Remove the check box).
    2. Go the your workflow and create an activity with task having this ASynchronous method. There is a tab in your task called "Termination Events" Give the events for which you want your workitem to get terminated.
    Please check what is the event available for Posting/Parking the document and use that event in the termination tab of Task.
    if there is no event then you need to create an event and trigger it manually in some user exits when the document is parked.
    Hope i have clearly explained you. If you didnt understand anything, revert back to me.
    Regards,
    Gautham Paspala

  • Closing Collections Work Items based on FI-CA Transactions

    Hello Colleagues,
    We have a requirement to close Collections Work Items when certain transactions are performed, e.g. Creation of Instalment Plan, Write-off, Payments to name just a few.
    Because some of  these items involve clearings,  Dunning  will not be triggered for the cleared items. Therefore I assume the Dunning BRF configuration cannot be used to close the Work items.
    Is the  only way to close work items when these FICA transactions are performed is by coding FICA Event logic that is specific to each of the transactions? (e.g. use a Write-Off Event to close work items when items are written off, an Installment Plan Event  when Installment Plan is created, and so on? )
    Your insights will be very helpful.
    Thanks in advance,
    Ivor Martin

    Thanks Bill.
    I understand and agree with  the expectation gap about Instalment Plans.
    Some good news on clearing of dunned items:
    We did some more testing after un-checking the  "Enforcement" Work item in the Work item category configuration.
    Now the work item is closed when the document that is in dunning is cleared (i.e. via payments, write-offs, reversals, acct maintence, etc). The Work item Status turns to "G" (closed due to incoming payment).
    I have logged an OSS in regards to the Instalment Plan on the request of my client - I would  be surprised if they send us a fix to close the work item upon creation of an Instalment Plan. I think we will end up coding our work item closing logic in FI-CA Event 3040 (after the Instalment Plan is created).
    Regards,
    Ivor

  • Need to set "Title", "Display Name" and "Name" fields to custom string property "RMA Number" for each instance of custom work item

    Hi,
    We have a custom Work Item we use to track RMA's. I've created a string property called RMA Number which is also used as a key.
    RMAs do not have titles or any other identifying properties other than the unique RMA number (think incident number).
    I was wondering what the best approach would be to set these other fields ("Title", "Display Name" and "Name") to the RMA Number value (RMAXXX), as I'm currently investigating using a powershell script via a workflow.
    Thanks,
    Pietro

    Hi Marcel,
    I've come up with the following:
    # Load the SMlets module
    Import-Module SMlets
    # Get the RMA Class
    $RMAClass = Get-SCSMObject -Class (Get-SCSMClass -Name MyWorkItem$)
    foreach ($RMA in $RMAClass)
    $RMANumber = $RMA.RMANumber
    $RMA | Set-SCSMObject -PropertyHashtable @{"DisplayName" = $RMANumber; “Title” = $RMANumber; ”Description” = $RMANumber; }
    Is it possible to make it aware of which RMA work item executed it, and only update that one? Updating all the records each time a new one is created will cause some problems in the future.
    Thanks,
    Pietro

  • User who is informed when a work item or workflow has been fully processed

    Hallo,
    message recipient for completion:
    User who is informed when a work item or workflow has been fully processed and its status is set to completed.
    Where I can change the word "Notif. of Completion:" for e-mail (in german "Endebenachrichtigung")?
    I don't want to change the text.
    I want change only a word.
    If the e-mail is created, the word is automatically written completion text  "Notif. of Completion:" ("Endebenachrichtigung:").
    Thank you for your help.
    Best regards.
    Edelgard Kubsch
    Edited by: Edelgard Kubsch on Dec 17, 2010 11:10 AM

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

  • Forward work item that has been completed

    Can I know if there is anyway that I can forward the work item to someone even though the transaction has already completed?
    Also I would like to know if I can forward the work item to someone when it's not in a dialog step?

    Hello Shreya,
                You can forward the workitem from the transaction code SWIA.
                 You can also forward the non-dialog work item too from the same transaction code.
    Regards,
    S.Suresh
    Edited by: Suresh Subramanian on Jun 17, 2010 10:33 AM

  • Executing Batch work Item: Transaction brackets of the workflow has been da

    Hi,
    I am integrating workflow with the HR Processes and Forms using HCM.
    The process is new hiring and in configuration I have given the workflow name which is copy of the standard workflow(WS18900008). The event used is draft_created.
    When I execute the process and press the Save Draft, everything goes fine, the workflow gets completed but for the step Save Form Data(WS17900260) throws the following error:
    Executing Batch work Item: Transaction brackets of the workflow has been damaged.
    The task is TS17900108.
    Not able to understand what is this error and to which it is related.
    Pls help.

    Look for SAP Notes as this is SAP standard code.
    Short Text
    Transaction brackets of the workflow has been damaged
    Diagnosis
    When executing the workflow with the ID , the transaction brackets were destroyed by a commit command ('C') or a rollback work command ('R'). This command ('') was stopped from the implementation program of the object type. Access takes place, for example, when a condition is evaluated or when the container operation is executed. Access may only have a read character which is why a commit or rollback work command is not necessary.
    System Response
    The system has written a log entry. Uncontrolled commit or rollback work commands can affect the restart function of the workflow system. This restart function is only necessary in the case of errors. The current workflow instance is executed further.
    Procedure
    Check the implementation program of the object types and remove the corresponding ABAP instructions.

  • Delete credit memo work item created in VA01 when the user change value

    Hi,
    In T.code VA01 Credit memo request is creating, this document will automatically create  work item.  Based on Net value in credit memo request, the work item should go for 5 levels of approval. After 1st person is approved, the workflow initiator realized that the net value in created Credit Memo request is wrong; he is going to VA02 and correcting the net value. Again we have to create new work item for this and delete the already created work item. Client has clearly mentioned when ever there is change in 5 critical fields in VA02 then only create fresh work item otherwise no need to create SECOND TIME work item. Net value is one of the critical field in the list.
    How to track already created credit memo request and how to delete the previously created work item. What is the feasibility of this requirement and how to handle this situation?
    Regards
    Vijay

    Hi,
    Just put a Fork and put 1 out of 2 outcomes and in the first alternative, you put your witem that goes to user B. In the 2nd alternative, put a Wait for event "CHANGED". And after this, put a process control step with "Set workitems to Obsolete" or "Cancel workflow" etc., depending on your requirement.
    Pl note that this will only take out old witems, but you need to send a new witem for which you need to trigger another instance of the workflow as well. pl put CHANGED event also as one of the triggering events and use condition editor to restrict the fields that triggers the workflow.
    Also, look into the IMG config of the following path. This might be a fitting solution.
    In SPRO, go to Financial Accounting (New)---> Financial Accounting Global settings(New) -
    >Tools --->Workflow ---> Workflow for Document Parking -->Reset Release Approvals(Customers).
    Here, you can list down the fields, the workflow should restart. But, then you need to give the workflow details etc., in the relevant config settings.
    We have used this in restarting workflows for General Ledger(GL) documents' workflow when some important fields are changed.
    For this config settings, look into the following help link.
    http://help.sap.com/erp2005_ehp_02/helpdata/en/01/a9cdd8455711d182b40000e829fbfe/frameset.htm
    Hope this helps.
    venu

  • Send notification to external mail id when work item reach users inbox

    hi all ,
              i would like to know wat are all the settings required for sending an external mail when a user recieves a work item. i think it can be done by running the program rswuwfml .but wat are all the settings required to be done before running the program .....
    Useful answers will be rewarded.......

    What the??!!!! I totally missed this before and actually found it quite acidentally....
    >Yep true! Totally agree with Kjtetil, it adds to an already noisy forum and I am >afraid if others start aping it will be brought down on level with the XYZ forum. >And we don't want that!
    >Anyone volunteering to have the 'M' flag?
    Though I cannot comprehend what you are trying to get at or say I will, attempt to set the record straight.
    Yes I have said that on another thread. I am not asking for points anywhere, I am happy to receive and happier to solve someone's problem.
    The issue with this thread is the author obviously has not bothered to do any investigation. I am not for spoon feeding just for the sake of some points, I am willing to help those who do some bit from their end as well who encounter a genuine stumbling block.
    My reference to "reward" was with a bit of sarcasm, if you know what that means.

  • Issue with Work Items for a User

    HI All,
    I have an issue with workflow.
    One of my user stopped receiving work items in his inbox. I checked table SWWUSERWI and found 0 entries for the user. So i guess there is no problem with the display setting in SBWP.
    What could be the probable reason and where can i find if those workitems that are generated for him that he has not received.
    Regards,
    Rohit

    There can be many many reasons. You need to understand the workflow and work with an example (an item the user says they should have received). Then try to follow the agent determination logic based on the data contained in that example and verify that everything matches up.

  • How to retain the work item in inbox of user if user press the icon cancel?

    HI,
    we  are using a text editor in approval section of workflow where the user needs to enter the reason for apporval or rejection.
    the requirement is how to retain the work item in inbox of user if user press the icon cancel? there are two icons in editor,one is ok(tick marg) and cancel(cross mark).
    so when user dont enter any text in the editor and press on cancel icon,then approval/rejection should not authorize and work item will remain in the user's inbox .unless and untill he enters the text.
    i have tried   LEAVE TO TRANSACTION 'SBWP'.leave program etc but nothing is working.
    please guide me.
    thanks
    prsahu

    Hi,
    Go with Sangvir Singh suggestion.
    It also looks neater from a Business Process Modeling perspective. You continue the process flow only when a change has occurred.
    Kind regards, Rob Dielemans

  • One of the user is unable to remove obsolete Tags from new work items and search query

    Hi I am new to TFS Administration, User has some obsolete Tags in TFS site which is removed on the Backlogs but user can see those tags when he is creating new work items and while querying the Work Items but he is not able to see any obsolete tags in Backlogs.
    TFS version: TFS 2013 SP2
    Steps followed:
    we queried each tags, we see 0 work items associated with the tags
    As per MSDN, we have to remove associated tags which automatically removes the Tags after 3 days
    The user is facing the same from past week
    Am i missing something? or will the list of Tags be available in new work items and  querying WITs? Please help
    Thanks in Advance

    Hi BE,  
    I tested this scenario in my TFS 2013 Update 4 Server, and found that Tags will disappear  from Tags dropdown list automatically after serverl days, if there’s no any work item associated that Tags. 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What's the fastest way to look up a User's Work Items?

    Hi, my SCSM environment has a few different service desks and plenty of customer drive-by's.  Sometimes when a customer comes up and asks for a status, the SD personnel can't find their ticket quickly. The fastest way right now is to 1.) click on CONFIGUATION
    ITEMS; 2.) Search for the Affected User; 3.) Click on the Affected User; 4.) Click on the Affected User's Related Items; 5.) Search the related items for the proper Work Item; 6.) Load the Work Item.
    It's not bad, but it's a lot of steps and I'm wondering if anybody has a faster method in place.

    Just to poke holes in the salesmanship, Consider that you might have an easier time in doing any of the following:
    Create a view that lists all open incidents, and make the first column Affected User. Analysts can filter or sort by this column to get quick info
    The search box in the top right corner can be set to users, right click the down arrow to see all options. 
    the search box in the top right can be used to search work item IDs or titles.

Maybe you are looking for