Post System Refresh
Hi Guru's,
I needed to know what are important BI steps to go through (for system check up) after the system refresh.
In this case, the testing box has been refreshed from the production.
Thanks, Akash
hello,
After the refresh, the connection with the source system gets lost.You need to:
1.restore source system connection
2.activate and replicate datasources
3.Run program RS_TRANSTRU_ACTIVATE_ALL to activate the transfer struture
4.If you had not transported certain objects from QA to prod. You will need to retransport them.
have a look at 4 possible scenarios and check the strategy at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
Check these notes: 140276 and 325470
to know the other possible notes for this,have a look at:
/message/3030702#3030702 [original link is broken]
Reg,
Dhanya
Similar Messages
-
Post system refresh, "Request IDoc : IDoc with errors added"
Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AMHi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha -
IDOC Tables with Errors Post System Refresh
Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- IshanHi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha -
How can we automate the Post system refresh activities
All,
Just want to know if there is a way to automate most of the post system refresh activities that were done by Basis.
Please note that i am talking about Post System refresh activities.
Appreciate your responses.
Thanks,
GiriIt all depends on what you would like to do: you keep the same SID or is it a rename?
- you could plan 1 jobs on production after event 'Zafterrefresh" with following steps:
that runs a BDLS
that does a cleanup of the spools
cleanup application logs
Trigger the event after the refresh and that starts.
Depending on your system you can run multiple jobs in //
some actions will have to be done manually:
user import
TMS config
etc -
Hi All,
I did system refresh ( from PRD to QAS , platform Windows 2008 R2 and MSsql) the system was up and running fine. The system was absolutely fine for one day and the day after the DB crashed , not sure what happened, is there a way i can find the logs through which i can come to know what exactly happened. Also post refresh when i was trying to run BDLS , the job was getting cancelled , the job log showed there is another conversion already running , when i checked the tables the conversion had already happened . Please tell me can running BDLS which cancelled many times could be the cause for the DB crash, if yes where can i find the logs for this , if not what else could have happened that the DB crashed . Thanks for your responses in advance.
Regards
Mrigank AdityaHi Nainesh,
Thanks for the message , yes system is up and running fine , the DB team did a restore of Production data on Quality again , and i did the post refresh activities again , the issue what had happened last time was we were doing simultaneous refresh of two systems at a time , BI prod to BI qas and ECC prd to ECC qas , we had found a list of tables in BDLS which gets updated when we run BDLS and we run those tables only , unfortunately the files got exchanged , the ECC tables should have run on ECC machine and BI tables should have run on BI machine which didn't happen and it happened the other way round BI tables where run on ECC machine , due to which BDLS failed and the job got cancelled many times, which impacted the whole system conversion and logical update , which crashed the DB( i exactly don't know the reason what happened internally , still searching for it ) . At present the machine is up and running fine.
Regards
Mrigank Aditya -
Post System Refresh Activity - BDLS run
Hi,
We have finished system refresh of a QA system from Production. We need to run BDLS now to convert the original Production logical systems to QA relevant logical systems.
I am short of understanding of this process. Can anyone please help me with the concept and process?
Thanks in advance,
AbdulHi Abdul Rahim Shaik,
BDLS will convert the logical system name for your PROD to QAS.
For eg:
Your source - PRDCLNT100
Your target - QASCLNT100
If you go to SCC4 in your QAS, u will see Prod logical system name for the client.
Once you run BDLS after system copy, logical system name exist in every table for PRDCLNT 100 will change to QASCLNT100.
Refer to below link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/frameset.htm
Cheers,
Nicholas Chang -
Initilization Issue post system refresh
Hello Everyone we are encountering below mentioned ST22 dump when we try to open any IP related and try to delete/re init, can you please suggest applicaple fix?
Thanks
Abhishek ShanbhogueThanks Raman for your response, I have tried replication and activation yet no luck
I am able to open full IPs but when I try to go to delete init requests then it throws this dump
Thanks
Abhishek Shanbhogue -
SDCCN settings after system refresh
Hi,
I am planning to refresh my TST system with PRD.
For post system refresh activates, what I have to do for SDCCN settings.
So that EWA will generate automatically.
Kindly advice.
Our environment Windows 2003, Oracle 10g2 and Netweaver 7.01
Best Regards
SatyaHi Satya,
Once you finish the QAS refresh then login to Solution and perrun a "managed system configutation wizard " and make sure to activate EWA.
After you finish the above said wizards sucessfully then schedule EWA under "EarlyWatch Alert Management" (SOlman SP10).
I'm sure this would assistance you to enable EWA in QAS .
Regards
Mani -
System copy post DB refresh error
Hi,
I am doing a post db refresh (Oracle/Solaris) and while creating control file getting error
SQL> CREATE CONTROLFILE SET DATABASE "XXX" RESETLOGS ARCHIVELOG;
CREATE CONTROLFILE SET DATABASE "XXX" RESETLOGS ARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file '?/dbs/[email protected]'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ALSO
SQL> startup nomount
ORACLE instance started.
Total System Global Area 2214592512 bytes
Fixed Size 2053640 bytes
Variable Size 1174407672 bytes
Database Buffers 1006632960 bytes
Redo Buffers 31498240 bytes
SQL> @control.sql
SP2-0310: unable to open file "control.sql"
Please help.Hi Anshul,
First please refer System copy guide for successful procedure http://www.basisconsultant.com/j/index.php?option=com_k2&view=item&layout=item&id=1&Itemid=185 .In addition please follow SAP Note 546006 - Problems with Oracle due to operating system errors
and try to execute SQL command create spfile from pfile ; ( ORA-01565: error in identifying file ‘?/dbs/[email protected] )
Regards,
Gaurav -
Post BI System Refresh steps- RSA1 issue
Hello All,
I am doing the post system copy for BI system. We did our system copy for both BI and ECC in parallel.
Now I am unable to Restore the Source system in RSA1 by right clicking, when i do that it i can get upto the steps where it prompts me to log in as admin to the source system which is fine, checked rfc is also fine. In the final step i get a message that says "Source system does not exist" . All the logical names have been changed using BDLS and RFC connections are reconfigured too.
This is what I have done so far:
-Ran BDLS (both in Target EEC/BI) , same in ECC.
-Changed Source system logical name for Mysource.
-I also changed the entries in Table RSLOGSYSDEST in Target BI.
After doing some research I found that table RSBASIDOC table in Target (ECC) system, there are still entries copied from u201CSource u201D systems , and we need to deleted those old source system connections by running RSAP_BIW_DISCONNECT functional module with the following parameters in ECC (target ECC):
I_BIW_LOGSYS = <RLOGSYS>
I_OLTP_LOGSYS = <SLOGSYS>
I_FORCE_DELETE = 'X'
I tried doing this .....when i execute this FM in ECC (target system) it prompts me to log on to the Source BI system , is this normal? I am little hesitant about this if it would delete some tables/objects in BI sytems.. can anyone pls tell me if this is normal?
Since there are stilll some entries in RSBASIDOC in Target ECC systems with old connections entries, could this be the reason why I am unable to restore the Source system in Target BI system in RSA1.? if not what else could be the issue here?
Please suggest...i would appreciate your help...
Thanks,
Edited by: DK MJ on Jul 19, 2010 9:54 PM
Edited by: DK MJ on Jul 19, 2010 9:55 PMhello all,
I found out that the source system client setting was closed in SCC4, after changing i could get pass this hurdle...now i am in RSA1 trying to restore the sourece sysem. I tried to do restore and it asked me if i wanted to activate/replicate datasources too..and i chose yes..it took about 3-4 hours and was still running so i finally killed the session. Should i delete the existing Source sytem or Restore? can anyone tell me if i Restoer the source system then do i also need to select Reactivat/Replicate Datasourcess too? please give me some suggestions thanks. -
SRM - System Refresh (Post Refresh steps)
Hi,
Can anyone tell me the steps to execute after SRM system refresh using file copy method ?
Thanks & Regards,
JagI have seen this somewhere in the forum: See if this helps you
BDLS: Convertion of logical system (SRM).
Check entry in table TWPURLSVR.
Check RFC connections (R/3 and SRM)
SPRO, check or set the following points:
Set up Distribution Model and distribute it
Define backend system
Define backend sytem per product category
Setting for vendor synchronization
Numbe ranges
Define object in backend sytem
Define external services (catalogs)
Check WF customizing: SWU3, settings for tasks
SICF: maintain the service BBPSTART, SAPCONNECT
SE38:
Run SIAC_PUBLISH_ALL_INTERNAL
Run BBP_LOCATIONS_GET_ALL
Update vendor BBPUPDVD
Check Middleware if used.
Run BBP_GET_EXRATE.
Schedule jobs (bbp_get_status2, clean_reqreq_up)
Convert attributes with RHOM_ATTRIBUTE_REPLACE
BR
Muthu -
Unable to login in EP 6.0 after system refresh
After performing the system refresh of EP 6.0, completed the post system copy steps.
Imported the new certificated as well, when I try to login the page is getting refresh but remains on the same page.
please help me what could be the reason.Hi Abdul.
I think you have selected the Algorithm as RSA, which is the default one.<br />
Please change it to DSA and hope the issue will be solved.
Regards,
Satish -
Windows 8.1 will not activate on HP19-2113w after system refresh.
Everything was working fine on my PC. Then the other day it crashed and said there was a disk error and that it had to scan the whole drive to find the error. It finished scanning, but windows 8.1 would not load sucessfully. Therefore I did a system refresh thru HP recovery. After doing that windows would start up normally, but I lost my activation. When I tried to activate the response was "Key doesn't work try again later" or something like that. Kept trying, no luck. I thought it may have been an error with the system refresh, so I did the total system reset (after saving personal data). Now I am having the same problem with activation, and If I try to navigate the normal way to the activation screen, the screen disapears. I can get to activation using command prompt. but key still does not work. The key I am using I retrived from my BIOS data. Also, I ran the refresh and reset from the origional hard drive partition. I hope someone has a solution to this. Thanks is advance Bill
Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards -
Hello,
I am new to CUA and need help in determining the pre and Post steps for CUA during the System Refresh. The System Refresh is performed on the Child System and after the Refresh my original users and Role assignments have to overwrite the users and Role Assignments of the Copying System.How do I retain my original User data ?
Are their any guidelines to this process ?
I am researching oss and forums,and so far I don't have any clear procedure.
thanks,
FarahHello Farah,
I think by system refresh you mean system copy.
From system copy perspective follwing steps need to be taken:
pre copy steps:
1. Disconnect CUA. Please go to the child system. Go to TRANSACTION BD64 and delete the ALE model view for CUA.
Subsequently go to parent system. Then to transaction SCUA. In menu bar go to Distribution model and then to Delete. Choose the radiobutton Child System and then give the logical name of the child system.
Post system copy activties:
1. in case the system copy has been performed from parent system of CUA to child system then go to child system and then goto BD64. Delete the exisitng ALE model for CUA. If parent system is not the source system of CUA you can ignore this step. Next Login to parent system. Go to SCUA then change mode and then add the logical system name of child system to it.Next go to SCUG and do user master reconcilliation.for this double click on child system and then under do transfer users wherver it is available.
Frankly these are ideal steps after system copy ahich I follow since there is not much disparity in user master data across systems in my CUA. So even if system copy happens the user master data in child system remains more or less the same.
If at all there is a minor difference I adjust it through SU01 or SU10. However in case there is a major difference then you it becomes a bit complicated. reasons being system copy wil overwrite entire stuff. Whether it is CUA or any other data. Say for example a child role exisits in child system but is not in the source system of system copy then it wont be present after system copy. if there are such issues then let us know. May be we can think
something. otherwise this approach should do the job for you.
Please award points if you found the anwers useful.
regards.
Ruchit. -
Dear All;
I am in the post activities of SAP system refresh.
I restored the system using brtools successfully as you can see below:
then I went with the rest of the steps based on sap recomendations, and reached to SAP sql queries:
CREATE USER "OPS$<DOMAIN>\<SID>ADM" DEFAULT TABLESPACE SYSTEM TEMPORARY TABLESPACE PSAPTEMP IDENTIFIED EXTERNALLY;
CREATE USER "OPS$<DOMAIN>\SAPSERVICE<SID>" DEFAULT TABLESPACE SYSTEM TEMPORARY TABLESPACE PSAPTEMP IDENTIFIED EXTERNALLY;
GRANT CONNECT, RESOURCE, SAPDBA TO "OPS$<DOMAIN>\<SID>ADM";
GRANT CONNECT, RESOURCE, SAPDBA TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
CREATE TABLE "OPS$<DOMAIN>\<SID>ADM".SAPUSER (USERID VARCHAR2(256), PASSWD VARCHAR2(256));
INSERT INTO "OPS$<DOMAIN>\<SID>ADM".SAPUSER VALUES ('SAPSR3', '<Password>');
CREATE SYNONYM "OPS$<DOMAIN>\SAPSERVICE<SID>".SAPUSER FOR "OPS$<DOMAIN>\<SID>ADM".SAPUSER;
CONNECT /
GRANT SELECT, UPDATE ON "OPS$<DOMAIN>\<SID>ADM".SAPUSER TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
CONNECT /as sysdba
GRANT CONNECT, RESOURCE TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
GRANT CONNECT, RESOURCE TO "OPS$<DOMAIN>\<SID>ADM";
I checked if all users are on opened state using select USERNAME,ACCOUNT_STATUS from dba_users;
The database is running file, and it is opened, but when I run R3trans -d it gives me RC 12 and i get this error:
*** ERROR => CONNECT failed with sql error '1017'
set_ocica() -> SQL error code 1017
-->oci_get_errmsg (con=0, rc=1017)
OCIErrorGet -> SQL error code: 1017
ORA-01017: invalid username/password; logon denied
DbSlConnect(con=0) -> orc=0, 99=DBSL_ERR_DB
***LOG BY2=>sql error 1017 performing CON
***LOG BY0=>ORA-01017: invalid username/password; logon denied
I used brconnect -u / -f chpass -o PSAPSR3 -p sap so i can reset the password, but still I am getting the same invalid username or password error.
I checked the listener status, and it is running.
Kindly let me know how I can fix my error
Best Regards
~Amal AlounDear Gaurav;
I am running SAP Kernel 720 64bit unicode PL300
The content of my trans log file is the following:
4 ETW000 r3trans version 6.23 (release 720 - 15.05.12 - 20:12:03).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 05.08.2014 - 17:50:30
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Tue Aug 05 17:50:30 2014 149 0.000149
4 ETW000 [ dev trc,00000] db_con_init called 27 0.000176
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): rsdb/ssfs_connect not set => ssfs not used 41 0.000217
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 28 0.000245
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 14 0.000259
4 ETW000 [ dev trc,00000] Loading DB library 'dboraslib.dll' ... 44 0.000303
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 000007FEF1650000
4 ETW000 947 0.001250
4 ETW000 [ dev trc,00000] using "E:\usr\sap\TST\SYS\exe\uc\NTAMD64\dboraslib.dll" 18 0.001268
4 ETW000 [ dev trc,00000] Library 'dboraslib.dll' loaded 19 0.001287
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dboraslib.dll 23 0.001310
4 ETW000 [ dev trc,00000] Version of 'dboraslib.dll' is "720.00", patchlevel (0.215) 242 0.001552
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dboraslib.dll 26 0.001578
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dboraslib.dll 34 0.001612
4 ETW000 [ dev trc,00000] New connection 0 created 237 0.001849
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 56 0.001905
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 20 0.001925
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 25 0.001950
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 16 0.001966
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 36 0.002002
4 ETW000 [ dev trc,00000] -->DbSlConnect(vers=-1, type=0, env='[default env]', userid='[default usr]')
4 ETW000 53 0.002055
4 ETW000 [ dev trc,00000] DIR_CLIENT_ORAHOME is not set as profile nor env. parameter. 574 0.002629
4 ETW000 Assuming using instant client with unspecified location.
4 ETW000 [ dev trc,00000] Register application info. 97 0.002726
4 ETW000 [ dev trc,00000] Oracle client version: 10.2.0.4.0, (dbsl 720 220612, UNICODE[2]) 10033 0.012759
4 ETW000 [ dev trc,00000] Detailed Oracle client (patch) info not available. 30 0.012789
4 ETW000 [ dev trc,00000] Default connection: tnsname ='TST' 73 0.012862
4 ETW000 [ dev trc,00000] -->oci_initialize(con=0, char='UTF16', nchar='AL16UTF16', nls=-1),uc_ln=2
4 ETW000 50 0.012912
4 ETW000 [ dev trc,00000] OCIEnvCreate(mode=16384=OCI_UTF16) returned 0 (for default NLS handle)
4 ETW000 1828 0.014740
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrHp=027944B0) 58 0.014798
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrBt=02796088) 36 0.014834
4 ETW000 [ dev trc,00000] NLS env. settings: lang=41004D00450052004900430041004E00 167 0.015001
4 ETW000 [ dev trc,00000] terr=41004D0045005200490043004100 29 0.015030
4 ETW000 [ dev trc,00000] char=55005400460031003600 22 0.015052
4 ETW000 [ dev trc,00000] Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'
4 ETW000 43 0.015095
4 ETW000 [ dev trc,00000] charset='UTF16', ncharset='AL16UTF16', UNI_ASC=FALSE 19 0.015114
4 ETW000 [ dev trc,00000] Logon as OPS$-user to get SAPSR3's password 28 0.015142
4 ETW000 [ dev trc,00000] Connecting as /@TST on connection 0 (nls 0) ... (dbsl 720 220612, UNICODE[2])
4 ETW000 61 0.015203
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_SVCCTX, con=0, svchp=02795F48) 370 0.015573
4 ETW000 [ dev trc,00000] Allocating server context handle 31 0.015604
4 ETW000 [ dev trc,00000] Attaching to database server TST (con=0, svchp=02795F48, srvhp=0279EFF8)
4 ETW000 74 0.015678
4 ETW000 [ dev trc,00000] Assigning server context 0279EFF8 to service context 02795F48 30008 0.045686
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_SESSION, con=0, usrhp=027ABBE0) 86 0.045772
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='/', svc=02795F48, srv=0279EFF8, usr=027ABBE0)
4 ETW000 40 0.045812
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 28164 0.073976
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 95 0.074071
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 39 0.074110
4 ETW000 [ dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017' 38 0.074148
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 1017 19 0.074167
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=1017) 20 0.074187
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 1017 57 0.074244
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 39 0.074283
4 ETW000 [ dev trc,00000] Info: 99=DBSL_ERR_DB, oerr=1017, try to connect with default password.
4 ETW000 38 0.074321
4 ETW000 [ dev trc,00000] Connecting as SAPSR3/<pwd>@TST on connection 0 (nls 0) ... (dbsl 720 220612, UNICODE[2])
4 ETW000 30 0.074351
4 ETW000 [ dev trc,00000] Assigning username to user session: con=0, usrhp= 027ABBE0 23 0.074374
4 ETW000 [ dev trc,00000] Assigning password to user session: con=0, usrhp=027ABBE0 36 0.074410
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='SAPSR3', svc=02795F48, srv=0279EFF8, usr=027ABBE0)
4 ETW000 133 0.074543
4 ETW000 [ dev trc,00000] Tue Aug 05 17:50:40 2014 9992977 10.067520
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 33 10.067553
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 85 10.067638
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 37 10.067675
4 ETW000 [ dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017' 29 10.067704
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 1017 19 10.067723
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=1017) 18 10.067741
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 1017 55 10.067796
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 52 10.067848
4 ETW000 [ dev trc,00000] DbSlConnect(con=0) -> orc=0, 99=DBSL_ERR_DB 22 10.067870
4 ETW000 [ dblink ,00000] ***LOG BY2=>sql error 1017 performing CON 58 10.067928
4 ETW000 [ dblink ,00000] ***LOG BY0=>ORA-01017: invalid username/password; logon denied 22 10.067950
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'TST'"
Best Regards
~Amal Aloun
Maybe you are looking for
-
Error in purchase order creation
Hi, While doing me21n systyem throwing error message. "purchase order unit "TO" allows fewer decimal places only" i want to enter purchase order quantity as 100.200 Tonnes but system is not allow this quantity how to rectify this error. regards, meh
-
60i (DV) to 24p Tutorial
Hi, I was wondering if anybody can help me converting 60i video to 24p wiht compressor 2. A step by step process would be greatly appreciated. thank you
-
Reading from .CSV and storing it into a collection
Hi folks, Is there a way to make a dynamic procedure to work with .CSV documents and store it into a collection? For example you have to make a procedure to read from .CSV but users upload 10 different version that have different number of columns. N
-
CMS Configuration in XI/PI-7.0 inSunsolaris & Oracle Database
Hello, I am trying to configure CMS in XI/PI-7.0 inSunsolaris & Oracle Database, I downloaded all components from SMP,1.)DI_DTR 2.) DI_CBS 3.) DI_CMS these are zip files i am unable apply through SDM, pls let me know the procedure and any guide, i
-
What to write in update button?
Hi, I m creating a screen to modify data. I m able to query on my screen and able to modify one of the value (e.g name), I have created a button to save changes <h:commandButton value="Save Changes" actionListener="#{myBean.update}"/> but dont know w