Posting Across Controlling Areas
Hi,
We have 3 Controlling Areas for 3 geographical regions. US, EU and APAC. However, now we want to move the valuated stock items from one plant in the US region to another plant in EU region. Obviously we do have some cost associated with these materails and also, some transportation costs as well. Do we know how we can get this sorted out in SAP please. SAP OSS note clearly says that the cross-controlling area posting in SAP is not supported.
Any inputs please, always appreciated.
Thank you,
Subash Krishna
Hi,
I am not sure what you meant by that. I have 4 controlling areas linked to the same operating concern. The movement of valuated materials with their transport charges is between regions (Each region has separate controlling area). Somewhere on one OSS note we read that SAP does not support cross-controlling area posting as it is against the normal design of the SAP system. Are you saying that the derivation in CO-PA would help to get over this limitation?
Please could you throw some more light on this issue?
Thank you,
Subash Krishna
Similar Messages
-
Posting in Controlling Area Currency
Hi
We have the following Scenario
Actual Balance in WBS Elements X is 15000.00 AUD (Object Currency) and 12000.00 USD(Controlling Area Currency)
We have transffered the balance from X WBS Element to Y WBS Element by netting of the Object Currency to Zero.
Resulting that the revised balance as below :
Object Currency = 0.00 AUD
Controlling Area Currency = 1000.00 USD.
We like to net of the Controlling Area Currency also in WBS Element X.
Is there any way of posting the same in Controlling Area Currency Alone.
We want the solution urgently.
Thanks and Regards
Ramesh KRthanks for your reply.
But there is no Tcode with Fbb0. Can you provide me the correct Tcode. -
MIGO Posting problem controlling area
hi Gurus,
In doing a migo i got the error message as below as
( Control indicators for controlling area 2681 do not exist
Message no. KI102
Diagnosis
No control indicators exist in fiscal year 2008 for controlling area 2681.
System Response
No further processing is possible without valid control indicators in the controlling area.
Procedure
Check your entries or define control indicators for controlling area 2681, fiscal year 2008 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year.)
please help me out
Regards
MaashishGo to OKKP Controlling area and Select your Controlling area 2681 and Activate the same and Save.
-
Activating C&V Profile in Controlling Area Error URGENT
Hi Experts,
I'm having problems in activating C&V Profile. I have done all the set up in FI, CO, and PCA. They are all consistent but when i am activating it says the following errors:
Create a results analysis version for valuation view ID01
Version 0 in controlling area ID01 does not allow variance calculation
Actual data already posted in controlling area ID01
What should i do?
Please help me.Hi
Please check if you have define the version in IMG
Controlling->General Controlling->Multiple Valuation Approaches/Transfer Prices->Basic Settings->Create Versions for Valuation Methods->
If yes
Then in transaction code OKG9 Check the same version if its not reflecting create the same for controlling area ID01 for (WIP)
If the answer if helpful kindly assign points
Thanks & Regards
Mahesh -
Posting across GAAPs error in GR
Dear Gurus:
Trying to make a goods receipt (MIGO 101) I got the error: "Posting across GAAPs are not permitted". which would be the causes?
Thank you!!!
JFSHi,
NOOOOO.
Why would you recommend configuring a stochastic block?
What has that got to do with anything?
A stochastic block will block random invoices above a certain threshhold. Why would you recommend someone setting up a function that is purely and completely optional. How can you think that setting this would have anything to do with posting a goods receipt.
Please just ensure that the company code and plant involved have been set up correctly. This will solve the problem.
You could try the "copy, create and check" function for the company code and plant to run a check to see if there are missing config entries.
Steve B -
Posting period locked in controlling area
Hi
I am getting error while closing order ( posting period is locked in the controlling area xxxx for the period 11 in 2007)
i am able to post periods up to 10
how to rectify this
regards\
prasadHi,
See the tcode OB52 and OMSY
Regards,
Sankar -
Allowing trasaction currency post to the Controlling area
Hi All,
My Exisiting Configuration is as follows:
local curr: MYR
CO AR CURR: MYR (ALL OTHER COMPANY CODES ARE ASSIGND TO THE CO AREA)
OBJECT CURR:MYR,
NOW WE ARE RESETTING THE COMPANY CODE, AND CHANGE CONFIGURATION AS FOLLOWS
LOCAL CURR : USD
SEC PARAL CURR: MYR (HARD CURRENCY)
CO AR CURR : MYR
BUT THE OBJECT CURRENCY IS MYR,WHEN I POST THE TRANSACTION IN USD THE "ERROR COMES UP OBJECT CURRENCY MAINTAINED IN MYR"
IF I WAN TO MAKE THE CONTROLLING AREA TO ALLOW THE TRANSACTION CURRENCY WHAT IS THE SETTING TO BE MADE,(THE SYSTEM IS IN PRODUCTION)
YOUR INPUT NEEDED ON THIS ........
REGARDS
RAJHi,
Go to maintain controlling area. Double click it then in assignment control maintain " cross - company-code cost accounting. Then try to give controlling area currency as 20.
Now you try to post the document in USD. If it does not happen...no other clue...
That is why at the time of original implementation among many things Currency type & currency also to be discussed and frozen out.
Regards,
Velumani -
2 Controlling areas - Intercompany postings
Hello Experts,
Our client is looking at the possibility of having more than One Controlling area and Chart of Accounts. Say for instance, the Production Plants are in different Controlling area and using different COA, whereas the Sales companies located in different countries having a Separate Controlling area and Chart of accounts.
I do certainly understand that the system will be very very complex. However, we would like to know if there would be any issues while doing Intercompany transactions like delivering from Production plants to Sales companies / Delivery directly to the customers located in sales company's country.
I came across some write ups saying Cross controlling area costing is not possible.. But would that restrict the Intercompany billing as well?
I do not understand this clearly. Can anyone please explain the Pros and Cons of following the above Org structure.
Thanks
PrasadHi
I dont have any doc as such.. But, it will be the usual inter co billing scenario which I am sure, your SD guy would be aware of.. there is no spl process for your case..
In Inter co scenario, you have 2 choices
1. To follow the sale-purchase route
2. To use an inter company STO
in (1), you create SO in seling company and PO in purchasing company... Using IDOCS it can be automated... I am not detailing it here
(1) is used when the Material No is not same in both the companies.... Another drawback of this is that you cannot see Stock in Transit when your goods have been despatched from A but have not reached B
(2) is used when Mat No is same in both the companies... Adv is that you get to see stock in transit till the time B posts Goods receipt in his system
The no of transactions are also less in this case
I personally prefer (2)... Your SD/MM guys wud be aware of both.. I guess you should not worry on that front
Regards
Ajay M -
I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.
-
Downpayments in Controlling Area
Hi Experts,
I am posting down payment with reference to purchase order inturn purchase order has order as account assingment. now the downpayments will be transfered to controlling area through default cost element(OKEP). Can anyone suggest how this downpayments are treated in controlling area i.e posting entries, settlement, cost objects etc., and also what is the configuration required from controlling area end for the transfer of down payments other than default cost element in OKEP.
Thanks
SrinivasPlease check if master data is activated , there could be two records one in M version and second in A version , right click infoobject and activate master data.
- Monika -
Payment History upload in Credit control area
HI
I am working on implementation project and my client requires to upload the Payment History in the credit control area. We are only updating the A/R opening balance from the legacy system and no transactions data are uploaded. Please advise how to upload the payment history from the legacy system.
Regards
MuraliHi Ravi
Thanks for the info.
The payment history is not an input field in FD32 and it is updated through an internal program based on FI payment posting in A/R. My question was to find out whether there is any standard transaction to upload the payment history
Regards
Murail -
COPA Assessment Cycle using KEU5 for multiple controlling areas
Hello All,
There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
Regards,
SoumyaHi Soumya,
Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
Pls find the following text from SAP Help...
Parallel Processing of Cycles of an Allocation Type
Use
Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
Srikanth Munnaluri -
Hello,
We're starting to set up MSS My Budget. When I try to run a BW cost center report from within My Budget, I get an error indicating that the application can't determine a value for "My Controlling Area". Please advise how I can fix this. Authorization? User Exit?
Thanks in advance.
Regards,
DennisHello,
This problem has occurred AGAIN! I am at a loss of how to resolve.
E.g.
Hours posted = 168 (@ 50 Eur/hr)
Eur = 8,517.60
GBP = 75,396.72
The object currency is Eur however the controlling area currency is GBP. When converting back to GBP it is completely incorrect. Any help would be much appreciated!
Many thanks,
NVSpace -
User exit for merging the credit limit in different credit control area.
Dear All,
Please provide user exit for the merging the credit limit in different credit control area as well as logic for the same.
I have to merge the overall credit limit of the customer for some divisions. At this time in one company code we have created 9 credit control area as per product line. While creating customer master data and Credit management (FD32) user has assigned the different limit with respective to credit control area e. g Customeru2019s total limit assigned is 10 laks. For credit control 1100 Limit is Rs. 3 laks and for credit control area 2200 limit is 7 laks. Now the user wants to merge the credit limit for only above two credit control area. The sales orders should get created in any credit control area up to 10 laks.
Regards,
SureshDear Damodhar/All,
Would you please explain me prerequisite setting from functional side for these user exit?
I want complete functional setting prior to ABAP application so that it work properly post configuration.
Regards,
Suresh -
CSKA & CSKB Tables -Cost Element+ Controlling Area, Cost Element Category
I have few questions on Chart Of Accounts and Controlling Areas and CSKA(Cost elements (data dependent on chart of accounts)) and CSKB (Cost elements (data dependent on controlling area)) Tables--
1) One Chart Of Accounts has one or more Controlling Areas. Is there any situation where One Controlling Area contains many Chart Of Accounts.
2) CSKA Table contains all the Cost Elements under the Chart Of Accounts. So does all these Cost Elements appear under CSKB Table. Are there any Cost Elements which doesn't fall under any of the Controlling Area and only exists under Chart Of Accounts Level in CSKA Table.
3) In CSKB Table How do we know the corresponding Chart Of Accounts for the Cost Element.
4) In CSKB Table Cost Element Category depends on both Cost Element and Controlling Area. So does a Cost Element can be Primary Cost Element for one Controlling Area which happens to be GL Account and Secondary Cost Element for some controlling Areas.
5) Are there any Company Codes under the Chart Of Accounts which doesn't belong to any of the Controlling Area and doesn't have any Cost Elements.Hi,
1) One Chart Of Accounts has one or more Controlling Areas. Is there any situation where One Controlling Area contains many Chart Of Accounts. Never
One controlling area can be assigned to many company codes, but all must have been assigned to the same chart of accounts only. This is the pre requisite for the so called cross company controlling
2) CSKA Table contains all the Cost Elements under the Chart Of Accounts. So does all these Cost Elements appear under CSKB Table. Are there any Cost Elements which doesn't fall under any of the Controlling Area and only exists under Chart Of Accounts Level in CSKA Table.
If some data exists in CSKA table, it mean that, it must have been created as a CE in any of the controlling area
3) In CSKB Table How do we know the corresponding Chart Of Accounts for the Cost Element.
In CSKB, you wont get the correspondant COA for the given controlling area. If you want to know it pass field value CSKB-KOKRS to table field TKA01-KTOPL to get the assigned COA
4) In CSKB Table Cost Element Category depends on both Cost Element and Controlling Area. So does a Cost Element can be Primary Cost Element for one Controlling Area which happens to be GL Account and Secondary Cost Element for some controlling Areas.
You cannot create a secondary cost elemant using a key matching with an GL code in cross company controlling. In case of both company codes assigned to different controlling areas this can be possible
5) Are there any Company Codes under the Chart Of Accounts which doesn't belong to any of the Controlling Area and doesn't have any Cost Elements.
Only In case of CO module is not active for the a company code
Note: If you have more queries, post it separately rather than asking all in one thread. and be specific with your requirement with the actual scenario.
Thanks,
Srinu
Maybe you are looking for
-
Disable certain fields during the creation of SC using "create limit item"
Hi, I have a requirement to disable certain fields from the role "SHOP" associated with the operational purchaser role. I would like to disable the fields "Unlimited check box", "Service Agent", " Invoice Only radio button", "Unknown account assignme
-
Search using Firefox Help for disable WebGL returned the following question: How does one disable Webgl ? and a subsequent solution. Unfortunately, when trying to use the solution in FF5.0, it fails in step 3 when a "find" fails to locate "webgl". So
-
Transparency on pasted photos / objects?
Every time I paste a photograph into illustrator, it pastes with a decreased opacity (looks approx 70% transparent). The transparency of the object is set to 100% Does anyone know how I can switch off this annoying feature? Thank you!
-
I just got a Nano 3rd gen from someone and it's not doing as I wish. When I connect it to a computer, sometimes it will be recognised and sometimes it won't. When it's not recognised, the Apple logo will just flash on and off for hours. I kept it plu
-
Sales Employee wise Profitability in COPA
Experts, Below mentioned are COPA characteristics in current structure. Mentioned in RED are characteristics based on Derivation Logic. Company Code Plant Sales Org. Distr. Channel Division Customer Product Sales employee Supervisor Manager Segment I