Printing Issue in Hierarchical ALV
Hi Guys,
I am using SALV_DEMO_HIERSEQ_SIMPLE in my program.
From the output I need to print box by box in new pages.
ie if there are 5 boxes in the output,I need to print them in 5 pages.
There is a option to print complete output,but I did not find any where how to print box by box.
How to do this.
Thanks in Advance,
Prasad.
Guys Any Idea.
Or else can I do it in another way.
My Final ITAB looks some thing like below.
PN TKNUM POSNR BRGEW VOLUM
1 1111 10 100 50
1 1111 20 100 50
1 1112 10 100 50
2 1211 10 100 50
2 1211 20 100 50
3 1311 10 100 50
My print is dependent on PN value
For same PN I should get print in one page and if the PN changes it should print in second page and so on.....
NOTE: My PN has many values this is only the sample data I have provided.
Thanks,
Prasad.
Similar Messages
-
Print Issue with Sorted ALV Grid
Hi Team,
I am using ALV display for my Program. Iam using REUSE_ALV_GRID_DISPLAY. Also i have a Sorting condition for my ALV grid. So iam filling the Sort table & passing it to the Function module. The data is displayed correctly with Sorting as required in the Output.
Now the issue is with: Print from this ALV. When we try to print the data, The requirement is that the Print should be same as how it is displayed in the ALV. "Grouped Columns"..... But now, the Print is that all the data is filled in all the columns. But user wants the Print also to appear same as it is shown in a Sorted ALV display.(With some similar column data missing in succeding sort columns until new entry starts)
Please suggest a solution to acheive the same.
Thanks & regards,
ChaitanyaLook at Q#19 in the note 1009650. Merging functionality is available only for ALV grid display.
Related Note: 447055
Work around would be to display the excel in the SAP window (Excel in Place) and print it from Excel. Read the following thread to make the necessary settings to make it work. Download Report exactly same as seems with Layout set !!
Edited by: Jeevan Sagar on Jan 19, 2012 12:38 AM -
Urgent: Add a custom line in Hierarchical ALV.
Hi
I am using the FM 'REUSE_ALV_HIERSEQ_LIST_DISPLAY' to display the header and item table details. However I would like to add a custom line below the item details of each section so that I can calculate the total (total of a particular field in the item table) and print it in this line....How do I do this....
Thanks..
VijayHi,
See the attached report which is used to display Hierarchial display for header and item;
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
zhu_to_link,
zpallettr,
vttk,
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel,
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor,
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route,
zzexproute LIKE likp-zzexproute,
zzroute2 LIKE likp-zzroute2,
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE,
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03
ELSE. "AS03
t_data_tab-lvsta = 'C'. "AS03
ENDIF. "AS03
ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
INTO (t_data_tab-zpallet_no, "Jvdm01-
t_data_tab-zcount_check) "Jvdm01-
WHERE exidv EQ w_vekp-exidv. "Jvdm01-
PERFORM read_pallet. "MB01+
SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
FROM zpallettr "Jvdm01+
INTO (t_data_tab-zpallet_no, "Jvdm01+
t_data_tab-zcount_check, "Jvdm01+
t_data_tab-zdep_point) "Jvdm01+
WHERE exidv EQ w_vekp-exidv. "Jvdm01+
WHERE exidv EQ w_vekp-exidv "MB -
Urgent:Grand total in hierarchical alv
I am printing a hierarchical alv with subtotals. I want to print the grand total for the whole numeric columns ...
Can anyone explain me how i can do this.
Thanks and regards,
SubhakarHi,
In this case you not only require the totals but the subtotals also.
For achieving this output you will have to sort the alv on the first column and also give subtotals there.
use
data: SORTF TYPE SLIS_SORTINFO_ALV,
TSORT TYPE SLIS_T_SORTINFO_ALV.
in the function module reuse_alv_grid_display give
it_sort = tsort.
eg:
FORM ALV_SHOW.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT-BOX_TABNAME = 'IT_DISPLAY'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-ZEBRA = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = LAYOUT
IT_FIELDCAT = TCATALOG
IS_VARIANT = VAR1
I_SAVE = 'A'
IT_SORT = TSORT
IT_EVENTS = TEVENT[]
TABLES
T_OUTTAB = IT_DISPLAY.
ENDFORM . "ALV_SHOW
and write a subroutine for sort...
form sort.
CLEAR SORTF.
SORTF-spos = 1.
SORTF-fieldname = 'column_1'.
SORTF-tabname = 'IT_table used for display in alv'.
SORTF-up = 'X'.
SORTF-subtot = 'X'.
APPEND SORTF TO TSORT.
endform.
If this doesn't help I will send you the whole source of a sample program..
Abdullah -
How to find item wise totals and header wise total using hierarchical ALV
Hi Friends,
I came across an issue of finding item wise total using hierarchical ALV. I am getting header wise total by setting the field catalog. May you help me in finding Item wise total.
Regards
Nikhil.hi,
you must use "w_fieldcat-do_sum = 'X'" and change your layout like :
w_sort-fieldname = 'FIELD'.
w_sort-tabname = 'TABNEME'.
w_sort-up = 'X'.
w_sort-subtot = 'X'.
APPEND w_sort TO i_sort.
CLEAR w_sort.
you can use detailed code from http://wiki.sdn.sap.com/wiki/display/Snippets/Subtotalsinhirarchial+report.
regards,
orhan
Edited by: goktasor on Jun 1, 2010 11:03 AM (need points : ) ) -
Printing Issues with HP OfficeJet 100 and Windows 8.1
We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.
Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
HP ENVY 100 D410 Printing issues...
I have an HP ENVY 100 that has recently started having printing issues. We recently upgraded to Mountain Lion and had no problems in the upgrade nor have we had any other software that we've changed. The problem seems to be somewhat random and the results are always the same. When commanded to print the printer acts as if it is running out of ink and then distorts the fonts creating vertical lines on the page and skipping rows creating what almost looks like a bar code. It's most peculiar and the only way I can find to solve the issue is to completely restart both my system and the printer. Thinking that I had a driver issue on my Mac I used the utility on the printer to update drivers and none were found. To insure that the problems wasn't isolated to just my machine I tried our laptop as well and it seems to have the same problem. Has anyone had a similar problem?
Hi Talon,
That more liekly related to the software indeed, I would suggest trying the following steps:
Reset the printing system as listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01371980
Open the Applications folder, then Hewlett-Packard and then open the Device Utilities folder, launch the HP Setup Asisistant and follow the steps to reconfigure the device.
If there is no Hewlett-Packard folder simply re-add the printer by clicking the plus button under Print & Scan.
Now try printing and follow for any difference.
If the same persists uninstall any HP Software by following the HP Uninstaller under the Hewlett-Packard folder.
If there is no Hewlett-Packard folder follow the steps listed under Mac OS X 10.6, 10.7, and 10.8 > I used Apple Software Updates to install the product software below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02440673&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=5157536#N1305
Download and isntall the latest Lion Software below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-97934-2 &cc=us&dlc=en&lc=en&os=219&product=4073738&sw_lang=
Once completing the installation click the Apple icon and install any available Software Update.
Shlomi -
How to print some data in alv which is not in table.
hi all,
Please can any one tell me how to print some text in the existing alv program to the second line of every record.
the header is there but it is empty.In the data,
there are two lines printing for a normal alv.the same text should be printed in every second line of each record.Please reply soon.its urgent.This is not possible in ALV.
When you say some text I assume the text is not in the same columnar format as the list is.
ALV supports only a columnar format (except for subtotals).
You can add the text to the ITAB by parsing the text to the record. It is not going to look good if you do that. -
New airport extreme and printer issues
OK here is the deal
I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. ThanksThere have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
Sorry to be so vague, just thought it might be a start for you. -
I just replaced my b/w cartridge which was working for about 10 copies and now trying to print a colored copy and while the color print is fine, the black ink is coming out blurry/smudged. The screen indicates "Print cartridge problem (Black) Refer to device documntatnion to troubleshoot" I took out the cartridge, shook it, put it back in - no luck - help! Thanks
Hi @LYNNHAAG , and welcome to the HP Forums!
I see you're experiencing print issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Need help diagnosing cause of printing issue w/ image distortion
Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- IanHello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian -
Date Field in Hierarchical ALV
Hello Friends,
I have a few fields in my Hierarchical ALV output which are initially hidden.
When I choose to display these fields by changing the Layout the date fields come out in the form
MMDDYYYY
I need those fields as
MM/DD/YYYY
The date fields which are NOT hidden initially are in the format MM/DD/YYYY. No problem there.
When I go to settings and choose column width optimize I am then able to see these date fields as MM/DD/YYYY.
In My code I already set this col width to optimize. It is also working . But for fields which are hidden initially I have to explicitly set the width optimize again .
This problem is not there in GRID ALV.
Why is the HIER ALV not putting the date fields in MM/DD/YYYY format.Hi,
Just pass the Edit option of the fieldcatalog for those specific fields...
fcat-edit = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND' "<---- pass this
i_callback_top_of_page = 'TOP'
is_layout = it_layout
it_fieldcat = it_fcat
i_default = 'X'
i_save = 'A'
it_events = it_event
TABLES
t_outtab = it_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
*& Form USER_COMMAND
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&DATA_SAVE'. "<-------check this
PERFORM save_data.
ENDCASE.
ENDFORM. "USER_COMMAND -
Changing totals value in hierarchical alv for a particular level/row
Hi,
I am displaying a hierarchical ALV having 4 levels.
Using field catalog, totals for all dynamic columns are found out.
I have a requirement not to display totals value for first and second levels.
And if possible, to display another value.
Tried using CL_GUI_ALV_TREE->change_node.
But it not updating.
Please suggest a solution.
Thanks,
Nisha Vengal.Hi Ten Mariga,
I wonder why the second select Query is needed at all instead you can use
---> Not Needed
FORM DATA_RETRIEVAL1.
SELECT * FROM zcontact INTO TABLE it_zcontact WHERE id EQ wa_zcontact-id.
ENDFORM.
----> Instead you can do
READ TABLE it_zcontact INTO wa_zcontact INDEX p_seltab-tabindex.
Append wa_zcontact to Second_table.
And you can use the Second_table to display the second ALV. The second Select Query will affect the performance too.
Cheers,
Krishnakumar B. -
Switching between Hierarchical ALV and List/Grid ALV
Hello!
I was checking out the List of GR/IR Balances report (tcode MB5S), which uses Hierarchical ALV. I noticed that there's a button in the output toolbar that enables you to switch from Hierarchical ALV to Grid ALV. Is there a specific setting in the ALV that you need to define in order to use this feature?
Thanks in advance.Hi,
there is no need of any specific settings.
those properties will came when u use the related function module.all the code for this will exist in the function module u r using for creating the hierarchial display.
regards,
bharat. -
Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, BelgiumHi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.
Maybe you are looking for
-
Can I update my ibook G4 to work with my ipod touch?
My ibook is running OS X 10.4.11 and I have itunes 9.2.1. When I try and sync my ipod touch 3rd generation, I get a message saying that I need a newer version of itunes to sync my ipod. When i check for updates in itunes, nothing comes up. When I go
-
Can't restore system (with Time Machine) after Hard Drive recall
Hi, so first a bit of history... - Purchased my iMac in 2010 - Upgraded iMac to Mountain Lion in 2012 (I downloaded it so don't have install disks) - iMac hard drive was recalled 2013 (Seagate 1TB) – before taking the iMac back, I made sure Time Mac
-
Where can I find good ID pocket folder templates?
My ID software came with a huge folder of templates for all kinds of projects, but strangely enough, there are no pocket folder templates. I wonder why? Aside from printer's websites, are there any ID pocket folder templates in some obvious places th
-
I have recently updated iPhoto and also had to restore my iPhone 4s. Since then, I noticed that my iPhoto albums on my iPhone no longer have the correct photos in them. The albums are correct in iPhoto. I also noticed that the last 12 months album
-
X-lite Sip Phone Registration Rejected
I have an x-lite sip phone that i added as a third party(basic) sip device on cisco call manager, settings are: UserID: <Extn No on CUCM> Domain:<ip address of the CUCM> Password:<CUCM Digest Credentials> Authorization Name: <UserID on CUCM> No Domai