Problem connecting as instructor and student. Admin is ok though.

I am trying to set up instructor & student access and I can not log in. The admin account works fine. What am I doing wrong?
Thanks in advance.
Here is the debug info:
Received
Destination blah.edu
Identity "Mark lastname" <[email protected]> (me)
Credentials Instructor@urn:mace:itunesu.com:sites:blah.edu:BIO224-01-08-SP
Time 1210942998
Signature e9c4d894ada73656c6b93ea0e64eecbb5a319b752831e58758799aff2162902f
Analysis
The destination string *is valid* and the corresponding destination item was found.
The identity string *is valid* and provides the following information:
Display Name Mark lastname
Email Address [email protected]
Username me
User Identifier None
The credential string *is valid* and contains the following recognized credential:
Instructor@urn:mace:itunesu.com:sites:blah.edu:BIO224-01-08-SP
The time string *is valid* and corresponds to 2008-05-16 13:03:18Z.
The format of the signature string is valid, but *its value is not valid* for the shared secret of the destination and for the received identity, credentials, and time.
To verify that your signature generation algorithm is correct, try using it with a shared secret of "SHARED-SECRET-FOR-ACCESS-TESTING" (hexadecimal value 0x5348415245442d5345435245542d464f522d4143434553532d54455354494e47). When you use that test shared secret, this debug page will indicate when you have successfully generated a valid signature for it. If you are seeing this paragraph, you have not yet generated such a signature.

I have attempted to find the differences between my script and Woolamaloo. They are bolded below. My first item is to be able to get instructors to log in, then i'll focus on permissions.
*My script:*
https://deimos.apple.com/WebObjects/Core.woa/Browse/blah.edu?credentials=Instruc tor%40urn%3Amace%3Aitunesu.com%3Asites%3Ablah.edu%3ABIO224%2D01%2D08%2DSP&
identity =%22MarkLastname%22 %3CMyUsername%40blah.edu%3E+%28MyUsername%29&time=1211310910&signature=568aab02 ed3f213957aa85775c3166d3a4e2bf433ecb239c9eb3c55f8cefd0fd
Woolamaloo:
https://deimos.apple.com/WebObjects/Core.woa/Browse/blah.edu/tec548?credentials= Instructor%40urn%3Amace%3Aitunesu.com%3Asites%3Ablah.edu%3ABIO22401-08-SP&identi ty= %23Mark+Lastname%23 %3CMyUsername%40blah.edu%3E%28MyUsername%29 %5BMyUsername%5D &time=1211311249&signature=4711cf5efea6497f860472c611ea4a79aa79bf9842acb1f9e404 4024d8a627c2

Similar Messages

  • Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

    Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

    Download iOS 5.1
    iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
    iPad 1
    iPad 2 Wi-Fi
    iPad 2 GSM (AT&T)
    iPad 2 CDMA (Verizon)
    iPad 2,4
    iPhone 3GS
    iPhone 4 GSM (AT&T)
    iPhone 4 CDMA (Verizon)
    iPhone 4S
    iPod touch 3G
    iPod touch 4G
    iPad 3 Wi-Fi
    iPad 3 GSM
    iPad 3 CDMA
    Apple TV 2 (9B179b1)
    Apple TV 3 (9B179b1)
    Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

  • Hi I am having problem connecting my mac and iphone6 through AirDrop

    HI I am having problem connecting my mac and iphone6 through Air Drop

    You don't give any information about your Mac but note the quote below which states that it must be a 2012 or later model with Yosemite installed. The quote is from Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support which also contains some other things that may help.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.

  • Problems connecting 1 monitor and 1 TV to 2gb DDR3 AMD Radeon 7570 video card.

    I recently purchased an Hp h8-1360t computer with a 2gb DDR3 AMD Radeon 7570 video card and an Hp 2711 LED monitor. I am having problems connecting both the monitor (dvi) and a 50" Sony LCD TV (hdmi) with a 50' hdmi cable. When starting the computer, once the initial Win 7 boot up is finished, the monitor screen goes blank, except for the mouse pointer. When I turn on the tv and select the correct input source a normal Win 7 screen with icons appears on the tv. Only the wallpaper picture displays on the monitor and no icons. If play a dvd movie it will only show up on the tv with the sound coming from the speakers attached to the computer.
    I would like to retain control of the computer using the monitor. I tried to set the monitor up as the primary display source using the monitor configuration menu,but it won't allow me to save the dvi connection as the primary display source. The documentation that came with the computer and what I was able to find on the Hp site is lacking....to say the least.
    Any assistance with this problem will be greatly appreciated.
    Thanks,
    Tony

    First I would disconnect the TV HDMI cable from the computer.  That should return the PC screen to normal.  May have to reboot to get normal.  Then reconnect the TV HDMI and go into the screen setup routine, paying attention to which screen is supposed to display what information.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Problems connecting Logitech keyboard and iPad2

    I have problems connecting a logitech keyboard to my iPad2. I've succeed in pairing the same keyboard both with an iPad1 and my MacBook Pro, so the keyboard is OK.

    I am having the same problem as well. I would like to use my new iPad AIR as my primary computer for meetings and travel. I use teamviewer to remote in to my office work station and my logitech keyboard does not work at all. Have you found any resolution to this problem?
    Thanks.

  • Reissue:  Connection Timed Out and Airport Admin Utility Issues

    I put this post last November, but no one seemed to have a solution to it, so I thought I would try again...
    Our lab has and Airport Extreme (802.11g). Intermittently (once a week to a couple of times a day) our airport extreme will stop allowing new connections. Here's what appears to happen. The airport still appears in the the list of networks in the airport icon in the menu bar (ie it still broadcasts SSID), but when I try to connect it whirls for a while and then says connection timed out. If I go to the Airport Admin Utility the base station doesn't appear there even though all of the rest of the ones on our network do (I should at this point, mention that we have both ethernet and WiFi layers on our network--the base station operates as an access point in bridge mode). The only solution is to power cycle the base station. A couple of extra tidbits.
    * Base station firmware is current at version 5.7.
    * We never have more than about 8 users connected to the base station.
    * This inability to connect is independent of what computer is trying to connect and even occurs with iPod touches.
    * This problem has occurred for a couple of years (multiple firmware versions).
    * I also have similar problems on a network at home that has the new Airport express/extreme N arrangement on a cable internet connection.
    * Sometimes this seems to fix itself after 30 minutes or so of just ignoring it. Other times it does not.
    * The restoration of the ability of the airport to accept connections after the power cycle is always immediate.
    * We only have 6-10 connections, less than the max supported.
    * The Airport usually continues to work for those computers that are connected to it before it stops allowing connections.
    So couple of questions:
    1) Do other people see this problem?
    2) Is this some problem with the WAN network connection impairing the ability of the base station to establish WiFi connection that eventually resets itself after something times our or resets?
    3) Any suggestions as to what to do about it?

    Two reasons I don't think that this is likely the issue. Both are based on my assumptions about how noise would affect the working of a WAP. If these assumptions are erroneous, please let me know.
    The first is that I have tried both automatic channel selection and manual channel assignment based on an unused channel that was several channels away from other WAPs. Kind of circumstantial since other devices can emit noise in the same region of the spectrum (our phones are 5.8GHz and the microwave is no where near the base station.
    The second though, is that I can stand literally a foot away from the base station with my notebook or iPod touch and still have the same problem. It would seem the the noise would have to be enormous to interfere with a device that close the the base station. Also, why would the other connected devices continue to work?
    In the interest of providing a complete picture, I would say I have thought quite a lot about whether noise is a problem. This base station is installed in a lab, with lots of electrical equipment whirring away and to make matters worse, the base station itself needed to be installed right next to (Within inches) a circuit breaker box. I winced when I did this.
    Interestingly, the thing normally does work and the signal strength & signal to noise (reported by airport utility) and transfer rates are quite good when you can connect.
    Thanks,
    Michael

  • Connection Timed Out and Airport Admin Utility Issues

    Our lab has and Airport Extreme (802.11g). Intermittently (once a week to a couple of times a day) our airport extreme will stop allowing new connections. Here's what appears to happen. The airport still appears in the the list of networks in the airport icon in the menu bar, but when I try to connect it whirls for a while and then says connection timed out. If I go to the Airport Admin Utility the base station doesn't appear there even though all of the rest of the ones on our network do (I should at this point, mention that we both ethernet and WiFi layers on our network--the base station operates as an access point in bridge mode). The only solution is to power cycle the base station. A couple of extra tidbits.
    * Base station firmware is current at version 5.7.
    * We never have more than about 8 users connected to the base station.
    * This inability to connect is independent of what computer is trying to connect and even occurs with iPod touches.
    * This problem has occurred for a couple of years (multiple firmware versions).
    * I also have similar problems on a network at home that has the new Airport express/extreme N arrangement on a cable internet connection.
    * Sometimes this seems to fix itself after 30 minutes or so of just ignoring it.
    * The restoration of the ability of the airport to accept connections after the power cycle is always immediate.
    So couple of questions:
    1) Do other people see this problem?
    2) Is this some problem with the WAN network connection impairing the ability of the base station to establish WiFi connection that eventually resets itself after something times our or resets?
    3) Any suggestions as to what to do about it?

    Yes, I have the exact same problem.
    It's intriguing because I share the connection with my landlord who is often away. The base station is connected in his suite and we seem to never have any problem when only my wife and I are connected on it. I use a iMac 21.5" and my wife a 13" White MacBook (5.2). When he is home (about 1 week per month), that's when the connection will randomly disconnect exactly as you described. He uses a iMac 24" and occasionally an old iBook.

  • Problem connecting Firewire device and external HD at the same time

    Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
    The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
    I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?

    Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.

  • Problems connecting to itunes and windows

    I have a 4th generation 20gig ipod and since i ran the most recent update (2005-6-26), itunes wont recognize my ipod. i plug it in and it says do not disconnect, and itunes slows up for a bit like it always does when it recognizes my ipod, and then my ipod isnt recognized. Sometimes it will ask that i update the software. When I tried updating my ipod again, the updater wont recognize my ipod. it just gets stuck on initializing and it stops responding. To see if windows recognizes it, i went to my computer. When i click on the icon for my ipod (which now looks like a little music player with headphones), my computer (the box, not all of windows) stops responding. I reset my ipod by holding down the menu and center buttons, and now all my music is gone, except my ipod says that it has the capacity for 18.4 gb but only has 13.4 gb of space remaining. this makes me wonder what is taking up 5 gb of space on my ipod, since there is no music . Also when i attempt to disconnect my ipod through safely remove hardware, the safely remove hardware box freezes and stops responding, so as of now, to disconnect my ipod, im just physically disconnecting it, and i dont think thats good for the ipod. Help would be greatly appreciated.
    -ray

    I turned off the laptop and it still won't connect. We have comcast, we put our new modem in 2 weeks ago, the laptop is new from Friday. Everything was working fine until I downloaded iTunes. This happened yesterday and my mom clicked on the apple software update and then my wifi connected, so I tried that today, everything is update and it still won't connect. My dads android still connects and the two iPod touches we have still connect. Could it possible be my phone that's the problem? thanks for your help!

  • Problems connecting to iTunes and verifying cc info

    I Just upgraded to an iPad 2 for the original.  When I try to purchase apps it says I need to verify my cc info.  Once I input it it says that iTunes can not process my request and to try later.  My daughter is sitting next to me with her iPad 2 which is connected to the same iTunes account and is having no trouble at all! It also will not hold my cc info.  Wipes it all out after it says it can't process it!   So frustrated! Help!

    Hi Shean,
    OK I followed all those steps and was able to get iTunes to reset, install the newest version of iTunes and set up again like normal. However, still didn't recognize my iPod!
    I remembered then that I had installed an older version of iTunes onto my work computer, which had recognized my nano. So for kicks I decided to again, follow all those steps to uninstall the newest version of iTunes, reboot, and then install the older version of iTunes (from my original CD) onto my laptop. When I tried doing that, I got the following error message:
    "Error 1335. The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-Rom, or a problem with this package."
    What does that mean?! Also, I remember I started having these recognition problems after I had decided to "upgrade" my old iTunes to the new version (6.0.1) - could it be the new version that is causing the problem? And now I can't seem to install a previous version.
    Thanks for your prompt responses!

  • Problems connecting between ipad and hudl for vide...

    Hi,
    I've managed to video chat to my dad from an ipad to a hudl afew times since setting us both a skype account.
    I travelled to Turkey last week, and we could not manage to connect ok. My dad from the uk hudl got messages about connecting to a uk number. And from my ipad, it just looked like it was trying to connect, then said I had no credit. I put it down to having a low wifi connection in my hotel.
    Since returning to the uk, we have since managed to be able to connect. On my dads Hudl it makes a normal ringing out noise, not the bubbly skype noise. I don't get any ringing connection at my end. And also when I try and connect to him I don't get any ringing noise....
    I am right with thinking that all video calls should be free, whether your in the same country or not. Why am I being asked for credit?
    Can anyone help,?
    Many thanks

    On the iPad tap Settings > iCloud
    Swtich Documents & Data off then back on.
    On your Mac open Syetem Preferences > iCloud
    Deselect the box next to Documemnts & Data then re select it.
    Give iCloud  a minute or two to re sync the Keynote data.

  • Problem connecting the WIi and linksys WRT160N

    I recently bought a new linksys WRT160N so that i can give my wii wi-fi however my wii is still unable to connect to the internet. My wii can find my router but when it is performing a connection test i get an error. The error code is 51330. Any help will be appreciated, thank you.

    To fix this error message there are a few things you can try:
    Set your router to Mixed Mode.
    If it is set to G-Only it will not work.
    Set the channel on your router to either 1 or 11.
    Set the Wireless Security to WEP(not WPA?WPA2).Also make sure you enter the correct WEP/Network Key when prompted...
    All these settings can be found in the wireless tab and wireless security subtab on your router.

  • Does anyone else have problems connecting their iphone and i tunes not recognise it have reinstalled itunes 8 times now

    can you help my iphone wont recognise in itunes

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
    BTW, iTunes 10.3.1 is not a beta release. Only the iTunes in the Cloud service is beta.
    Regards.

  • Problem connecting wirelessly with home hub 3.

    Kodak gave me advice onthis problem. Entered security key in upper case instead of lower and it solved the problem . No help from BT on this.

    paulweekspat wrote:
    trying to connect kodak printer. i have resolved the issue with help from kodak. bt was no help at all. thanks anyway.
    What john46 says is quite correct, also Kodak would give you NO support for setting up the Home Hub..
    Thats not to say you would not have been given help on these forums if you had a problem connecting your printer and if we could not help,at least we might have been able to point you in the right direction.
    http://support.en.kodak.co.uk/app/home/selected/true
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • PE13 on Windows 8.1 and non-admin or UAC issues?

    Before I try to evaluate Premiere Elements 13 64-bit, I want to ask if lingering problems related to UAC and non-admin user accounts were resolved since version 11.
    It's good to see a 64-bit version of Elements come out since then.

    Gordon Fecyk
    On what computer operating system is your Premiere Elements 13 running? For now I will assume Windows 7, 8, or 8.1 64 bit.
    Not sure what you mean by:
    It's good to see a 64-bit version of Elements come out since then.
    assume you mean version 11. So in that case....
    Premiere Elements Windows 10, 11, 12, and 13 are 64 bit applications when installed and run on specifically on Windows 7, 8, or 8.1 64 bit. Other Windows versions are 32 bit applications in 32 bit system or 32 bit application running in the 32 bit compatibility mode of 64 bit system. On the Mac side of things,  it is my recollection that Premiere Elements 11 Mac was the first to be a 64 bit application when run on Mac 64 bit system.
    It is my understanding that nothing has changed over the versions with regard to Premiere Elements and the matter of "UAC and non-admin accounts". Probably Microsoft would be a good source on that. Recent threads seem to suggest that Premiere Elements is not working with Domain accounts.
    This is not Adobe. Rather a user to user forum. If you want to contact Adobe about your feature requests, you could consider the Adobe Feature Request Bug Report Form.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
    When you have specific problems with aspects of your Premiere Elements 13 purchased or tryout, we would be glad for the opportunity to be of assistance. Definitely recommend tryout before purchase to assure the compatibility of your program with your specific computer environment and your project goals.
    ATR

Maybe you are looking for