Problem exporting graphics to XML - dpi vs. impsize

Hi,
FM 7.2b128, exporting XML using schema.
I've had a structured app that I've used for a while that exports an impsize attribute (which I want) and does not export the dpi. The read/write rule is:
element "image"
is fm graphic element;
attribute "impsize" is fm property import size;
attribute "impby" is fm property import by reference or copy;
attribute "sideways" is fm property sideways;
attribute "impang" is fm property import angle;
attribute "xoffset" is fm property horizontal offset;
attribute "yoffset" is fm property vertical offset;
attribute "position" is fm property position;
attribute "align" is fm property alignment;
attribute "cropped" is fm property cropped;
attribute "float" is fm property floating;
attribute "width" is fm property width;
attribute "height" is fm property height;
attribute "angle" is fm property angle;
attribute "nsoffset" is fm property near-side offset;
However, I've been making some schema/EDD updates and other changes and suddenly impsize is no longer exported, only dpi. I can't figure out anything I might have changed to cause this to happen. In the documentation, it suggests that I should put in a "specify size as" rule, so I did that, but I still can't get the impsize back unless I put in a rule to drop the dpi, such as:
element "image"
is fm graphic element;
writer facet default
specify size in in;
attribute "impsize" is fm property import size;
attribute "dpi" drop;
attribute "impby" is fm property import by reference or copy;
attribute "sideways" is fm property sideways;
attribute "impang" is fm property import angle;
attribute "xoffset" is fm property horizontal offset;
attribute "yoffset" is fm property vertical offset;
attribute "position" is fm property position;
attribute "align" is fm property alignment;
attribute "cropped" is fm property cropped;
attribute "float" is fm property floating;
attribute "width" is fm property width;
attribute "height" is fm property height;
attribute "angle" is fm property angle;
attribute "nsoffset" is fm property near-side offset;
So, is this is working, but is it the right way to do it? Did I just get lucky before that impsize was exported instead of dpi?
Thanks,
Russ

For what it is worth...
I do not do much XML exporting, but started a project that needed it. I am creating an XSLT to convert the exported XML into HTML for a company intranet. I also noticed that I could not get Frame to export the impsize instead of dpi. I also tried the specify size in command, which did not work. I did not think to try dropping the dpi. Thanks for the suggestion.
So, this is not a question, but just to confirm that Frame is not doing what its documentation says it should. Maybe this is another bug that got overlooked in the testing.
(For the record, I DID discover a change in the way things work that DID get corrected in the last update. It would be nice if Adobe acknowledged these misbehaviors and let us know that they are trying to fix them.)
Van

Similar Messages

EIS Problem: Exporting OLAP to XML

Hi everyone,We are having some problems exporting our OLAP models to XML from within EIS (using the XML Import/Export function).We receive the following error:"Error -1: Contact your EIS administrator because the Java runtime environment may not be set appropriately on the server machine...java.lang.NoClassDefFoundError: org/apache/crimson/tree/XmlDocument at hisjapi.HISModel.exportXML(HISModel.java:1085)"The machine is running Windows 2003 server. We actually had a hyperion consultant in yesterday working with us but he was unsure how to correct this error.Any help greatly appreciated!!Many thanks,Brian

I had a similar problem and fould that if I stopped and restarted the EIS service, I could do the exports. I've also read elsewhere that stopping the EIS server from running as a service and running it in foregraound helps, but have not proven that yet. I do have a problem importing the metadata xml files to another server thatI am working with support on. I will let you know the results. (Version 7.1)

Problem exporting mixdown audio XML document from Soundtrack to Final Cut P

I am writing this up at the suggestion of FCP Tech Support.
I treated a multiclip audio track I had sent (along with the video) from FCP using the Compressor (Effects Tab>Dynamics>Compressor). I then sent the mixdown back to FCP automatically (following the instructions on page 209, Vol III, FCP User Manual.pdf). In FCP I got an error message: “ERROR: Critical Error aborted the processing an XML document…”
I noticed, however, that the sequence with the mixdown audio was listed in the Browser. Opening it in the Time Line, the mixdown audio was there along with the muted original audio tracks; however, the video track appeared with all of its cuts, but white and unrendered. So I copied the video from the original sequence and pasted it in the new sequence, in effect replacing the problematic video track. It played back fine. I saved and closed the project, quit FCP and shut down my computer.
When I reopened the project later on, I got a General Error 34 message. I called TS to find out what it means. After creating a new project and reopening it and another current project, neither of which displayed a General Error 34, the problem seemed to be unique to that particular project.
FYI that project was a multiclip one with 4 camera angles. The audio from one of the camera angles was used through out, except for one clip when the audio of another angle was temporarily used. The project was shot on Mini-DV using 2 Panasonic HVX-200’s and two consumer DV camcorders.

Thank you for anyone who read my question. I found the results on another posting. The posting was titled, "Export results in silent audio file."
Thank you,
Brian

Problem exporting graphics

Hi everyone,
I have had a reoccurring problem with my latest FCP projects when I export them through Compressor to DVDSP. My opening title is centered on the screen; my closing title is left justified. Everything is rendered and looks fine in FCP but when it gets to DVDSP, all the graphics are left justified. Any ideas on this? Not sure where I'm running into the problem... FCP, Compressor, or DVDSP.
Thanks for your help.
Lucy

This was answered in the FCP forum.

XML PROBLEM EXPORT PREMIERE PRO CS6

hello to all, the program is not running Premiere Pro CS6 upgrades and does not export more in XML format, there is the option in the dropdown menu of exporting premiere.
com and I need to know I can do to reappear the option to export XML in premiere pro CS6
thanks to those who will help me

I have a similar issue. This is the article you should probably read: http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premiere-pro.html

Indesign CS5 crash during startup - problem with Graphics.rpln

I work in an architectural company and already several of our computers have experienced this very rare and unusual behaviour. During start up of Indesign (not clicking on any file but just launching Indesign) it crashes with the following error:
"Adobe Indesign CS5 has stopped working"
We use Windows 7 64bit, so the first step I did - I went into Application Log which says, so appears to be a problem with Graphics.rpln.
-=-=-=-=-=-=-=-=-=-=-===-=-
Fault bucket 1848500921, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: InDesign.exe
P2: 7.0.0.355
P3: 4bad00be
P4: GRAPHICS.RPLN
P5: 7.0.0.355
P6: 4bad03d3
P7: c0000005
P8: 0004e1e2
P9:
P10:
Attached files:
C:\Users\User\AppData\Local\Temp\WER162E.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\User\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_InDesign.exe_b042 ec9a818cb8fb57eefe0aacb41c22fdcbb8_10c12aa8
Analysis symbol:
Rechecking for solution: 0
Report Id: 9e59fc2c-5b68-11e3-908c-f46d0497fc9b
Report Status: 0
-=-=-=-=-=-=-=-=-=-=-===-=-
I have tried everything I could think of - removed and reinstalled Adobe CS5, manually removed Adobe folders under %Appdata%\Local and %Appdata%\Remote folders (why can't Adobe delete those things during uninstallation is always a total mystery), changed video adapter drivers, cleaned Temp folders, everything I knew...
None of the other apps like Photoshop or Illustrator CS5 malfunction - only Indesign. What is going on?
Can it conflict with other software we use? We have Bentley Microstation, 3D Max, Office 2010, Kaspersky Antivirus and LOGMEIN installed on this computer...Any clues, guys?

Looks to me like you've never installed any of the patches. Last patch for CS5 was 7.0.4, so I'd start with that and see if ti helps.

Resolution problems exporting to DVD

I am brand new to FCP 5 and everything I have learned has been within the past two weeks. I have read MANY posts on resolution settings, square pixels vs. retangular pixels, iDVD problems, exporting problems, etc. However I have not found an answer to my problem, but many helped.
I am currently trying to project video from a DVD. The projection needs to be an EXACT size. After exporting and viewing with projection in QT Fullscreen, the video is exactly what I want.
However, when I burn a DVD using iDVD and project it from a DVD player, the projection is slightly stretched horizontally. Why is that?
The sequence is originally from HD and the export settings are -
-Frame Size: 640x480 (4:3)
-Pixel Aspect Ratio: 1440x1080
-Exported using QT Conversion NO COMPRESSION
(There are many other combinations of frame size and pixel aspect ratio's that also work initially, but they project with the same problem.)
I had to have missed something.
ANY suggestions are greatly appreciated.
Eric
Power MAC G5 Mac OS X (10.4.7)

The footage did come from an HDV from Sony.
I use QT Conversion because if I export it as an QT Movie, the video is distorted. However, when exported through Quicktime conversion/quicktime movie/no compression, the movie is exported in the correct dimensions, though the DVD play back issue still persists.
I am running off of iDVD v 5.0.1 and could not find a place where I could choose a 16:9 option, if that is what you meant.
The sequence does include a PSD mask which was imported as a Layered Graphic Sequence. That shouldn't have any impact on the burning issue though.

PDF quality problems exporting from InDesign and Photoshop

Hi There.
I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
I have also noticed the same problem when I export to a PDF from Photoshop.
I really need to create interactive and high quality print PDFs from my InDesign files.
Please can you advise.
Thanks
Karen

I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
Does anyone have any suggestions?

Advice on ADDT Export Recordset as XML Tutorial

Hello all,
I recently had a situation where I needed to use ADDT's "Export Recordset as XML" behavior. However, the "Export Recordset as XML" behavior creates a php page that generates the XML when the php script is run and the resulting XML is published to the browser.
Unfortunately, I needed the php page to not publish to the browser, but to write the generated XML to a real XML file. I looked for help in the forums, but I was unable to find any information regarding this and it seemed some people had been looking for this ability.
I was able to figure out how to use ADDT's "Export Recordset as XML" to write the XML to a file when the ADDT created Export XML php page is run.
I want to share a brief description on how I did this. However, I had to modify the ADDT file "XMLExport.class.php" to get this to work. The modifications are are very simple and easy. You just have to comment out a few lines and change an echo to a return in the "XMLExport.class.php" file.
Before I take the time to write this up, I wanted to be sure it's ok to explain in these forums how to edit ADDT files. I know the license agreement allows me to modify the code for my own use. But does the license agreement allow me tell other's how to modify the code?
At the top of the Adobe "XMLExport.class.php" page you see this:
Adobe permits you to use, modify, and distribute this file in accordance with the terms of the Adobe license agreement accompanying it.
Rather than try and decipher a license agreement, I thought someone, probably Gunter :), might be able to let me know before I go to the trouble.
Thanks,
Shane

Hi Shane,
But does the license agreement allow me tell other's how to modify the code?
As this snenario isn´t explicitely mentioned respectively prohibited, I don´t see any problem at all with telling folks how to modify an ADDT "includes" file, though I´m not sure about the "distribution" aspect, as - to my understanding - an original or modified ADDT file can´t be offered for download or sent to others per email or whatever else might qualify as "distribution".
My suggestion for remaining on the safe side :: just write a tutorial and tell folks how to modify whatever file, because merely providing an information about a modification certainly doesn´t tangent the "use, modify, and distribute" definition of the license at all -- however, it´s the reader of your tutorial who´s having to decide whether the suggested modification is in accordance with the terms of the Adobe license agreement, though this shouldn´t be a problem as well, as they´re going to modify the code for their own use :-)
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Export EDL or XML for seq with speed change

Hi,
I am trying to export an EDL or XML of a 30 sec sequence of 10 clips. 5 of them have speed change. Basic speed change, not variable. They are UC 10bit from a DigiBeta captured with a Kona 2.
The problem is that the exported EDL or XML doesn't get the right clips in and out points for recapture on other systems. Any clue?

As long as there are speedchanges in the sequence, FCP will screw the EDL timecodes for source clip in/out and position in the timeline....and it's way off.
And the problem is not with Flame, if I open the XML or EDL in TextEdit, I see the TC mistakes. We do that all the time with the Avid MC and it works very well. Even if the speed changes wouldn't go through, I would expect clips coordonates and in/out to be ok.

Access - can't export schema to xml

omwb 10.1.0.4
windows 2000 work station.
can't export schema to xml.
waited for an hour and the omwb2000.mde just hung there with no response.
while with 10.1.0.2 it only takes several seconds

hi hilary,
I've noticed that another instance of access was up.
But it's not minimized.
And I've also noticed that omwb created three temp tables in the source mdb.
( all starting with '_'. can't remember the names. maybe acctables, acccolumns etc )
And the source schema data was stored in the temp tables above.
Then the access instance opening source mdb seems hanging somewhere waiting for something.
And the omwb2000.mde seems to be waiting for the other instance to end.
I don't know whether the source mdb has any security settings.
( omwb doc doesn't tell me the way to check that)
But I did the import which omwb doc said will eliminate secure setting problem.

Multi channel audio not exporting from fcpx xml as mono to logic always comes in a mixed surround

I have a long edit cut with 24 bit multi channel wav files (i.e 6 microphones on separate tracks but in a single wav file.)
This is very a very common production practice.
when i import into fcpx it defaults to seeing the files as surround. I change this to mono so i can mix and spit the audio between each mic.
The last step in the edit is to hand the mix off to the sound designer in logic.
however no matter how i export the xml file for logic. it always comes in as a surround file again instead of mixed mono files.
it shows up in logic as 6 tracks but all but generally only the top track has a mono mix of all 6 and the rest are blank.
it shows that all 6 are seen as 5.1 surround indicated by the icon.
interestingly if i just import the file directly into logic it comes in as 6 mono files. (the icon for mono showing and all are separate microphones)
Any ideas on how to get fcpx not to export the audio xml as surround? (it seems that it is locked to that on import no matter how i modify after)

Ok so i order to help anyone who is interested.
The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
i then imported this into premiere pro.
this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
this is the only way i was able to send stems with all the edit points and fades for the sound editor.
If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
Fingers crossed Apple fixes the fcpx xml export.

Hi, I'm trying to to export/import a XML file in the CP8, but it keeps telling me "Cannot import XML".

Hi, I'm trying to to export/import a XML file in the CP8, but it keeps telling me "Cannot import XML". To solve the problem I already tried following things:
1. Exported the file and then attempted to reimport the unedited file into a copy of the CP-project
2. Edited only a single character (using Notepad++) and once again tried to import the XML-file in the project.
3. Renamed the XML-file and the CP-project. Is there anyone who has solved this problem?
/J

Pasted this same reply/reference in your LinkedIn group post...
Try this thread (re: Run As Admin)
Import Captions in Captivate 5 - not working?

CPM error: Graphic: Invalid XML data format

Hi guru's
When I execute a cockpit the system shows the error: "Graphic: Invalid XML data format"
We have BI 7.0 and SEM-BW 600 SAPKGS6014
What can I do.
Thanks
Jose

Hi guru's
I still with the problem, I found a Note 768114 - Message 'Invalid XML format' if chart should be displayed. the note decribe my proble exactly. But the correction in the note are only until version 400 of SEM any our company is in 600.
With this clue, maybe you can help me.
Jose

_pageflow folder creation problems with generated build.xml

I currently have a Workshop project with a web app that builds my ear file just fine. But the problem is, when I export the build.xml file from the project and try to run it with ant, it doesn't generate the _pageflow folders that I would expect. Consequently, it doesn't get packaged in and causes errors when I deploy it. The funny thing is that if I generate the ear file from Workshop, it builds, deploys, and runs just fine.
Anybody encountered this before? Does anyone know how the pageflow folders get built? I narrowed it down the to build.xml <apt> task which seems to be one responsible for creating the pageflow folders. It also seems to be looking for jar file references in the .factorypath file, but I don't quite know which ones I'm supposed to use.
Any help?

No help from anyone?

Problem exporting graphics to XML - dpi vs. impsize

Similar Messages

Maybe you are looking for