Problem with printing emails with IOS 7.

I installed IOS 7 on my iPad 2 and now have problems printing emails. They come out in a very large print, even if I have disabled 'Larger Print' in Accessibility and have chosen a small print size. There was no such problem with IOS 6. What shall I do to get back a normal print size? Can Apple help please?

Check Settings>Messages>Send & Receive>Start New Conversations From to be sure your phone number is listed and selected.

Similar Messages

Printer won't print email with black ink, how do I correct this?

I am new here, and seek some help. My wife's i-Mac computer has a problem of not printing email with black ink. However, the printer will print email text in all colors, but not with black ink. The printer goes through all the motion/movements like it is printing in black, but only a blank sheet of paper is the result. However, it will print a black horizontal line (topic divider) across the paper in black ink, if that is shown in the email. Strangely, the printer will print using black ink when asked to print a word doc. The ink jet cartridge is new, so it is not an issue of being low on black ink.
I have changed printers, but still experience the very same strange problem. Is this a software problem, or a computer setting that needs to be adjusted? Any help would be greatly appreciated.

rooster2 wrote:
I am new here, and seek some help. My wife's i-Mac computer has a problem of not printing email with black ink. However, the printer will print email text in all colors, but not with black ink. The printer goes through all the motion/movements like it is printing in black, but only a blank sheet of paper is the result. However, it will print a black horizontal line (topic divider) across the paper in black ink, if that is shown in the email. Strangely, the printer will print using black ink when asked to print a word doc. The ink jet cartridge is new, so it is not an issue of being low on black ink.
I have changed printers, but still experience the very same strange problem. Is this a software problem, or a computer setting that needs to be adjusted? Any help would be greatly appreciated.
Your profile indicates you are running 10.0.x
Without knowing your real OS, it's not easy to answer your question
Message was edited by: nerowolfe

Problem in sending email with attachment more than 32kb through utl_mail

Hi friends
I am able to send an email with attachment upto 32kb using utl_mail.
But whenever I increase the size of attachment from 32kb, it prompts me an error.
===============================================
ORA-20001: The following error has occured:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
===============================================
i have also used LONG RAW instead of RAW, bu still the problem is same.
please help me in solving this issue.
Thanks in advance,
Ankur

Yeah that's an issue with UTL_MAIL it only has 3 procedures, and none of them let you send data to the SMTP server incrementally. To send files larger than 32k you will need to switch over to using UTL_SMTP directly or via a helper package such as the [DEMO_MAIL package|http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html] available from otn.

Problems re-sending emails with attachments

I am using Mail 7,0 with Mavericks.
I am having problems resending emails. When I resend an email with one or more attached files, then I am having a lot of problems because the receiver gets everything scrambled!!, the body text is received as an attachment and all the images or logos included in my signautre are also received as an attachment.
I would thank very much if someone has had the same problem and can help me to solve the problem.
Thank you!!!
José Ignacio

Which antivirus software do you run on your computer? Are there any errors posting? Have you shut off any email firewalls temporarily to attempt to isolate your issue? Do you have outlook 2003 on more than 1 pc in your home? Have your tried to attach a small text file and send it to see if that goes thru successfully?
Joe D
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.Follow us on Twitter™!

Resolution problem when printing JPanel with picture on bg

Hellow!
I have some problems with printing JPanel component. I have a picture drawn on the background of the JPanel and several buttons on it. The whole JPanel is about 1600x800px. When i print whole the component with the help of PDF virtual printer, component is printed larger than A4 list. It is strange for me because print resolution is 600 dpi, so whole component must be a rectangle with the size about 2.5x1.5 inches. When I scale the graphics before painting component to fit image to page (i mean ... {color:#ff0000}g2d.scale(sc,sc); panel.paintAll(g2d);{color} ...), the picture's quality becomes very bad.
I understod it so: I draw the component on the paper in screen resolution, then I decrease image size, so quality also decreases.
My question is: how to draw on the graphics of printing paper the component in printers resolution (600dpi), but not in screen resolution.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Problems to print contacts with specific fields under Maverick.

I am unable to print contacts with specific, selected fields like `firm´ or `position´under Mavericks. The selected fields will not show up in the printing preview and not be printed at all. Any ideas?

Thanks, John! It seems you guessed correct, partly at least. I turned some of the problamatic fields off and on again an these are showing up now and I can print them. Great!
However, I can see the field "firma" (German = company in English) in the previewed sample card but not in the pull down menu "Add Field". That means, I am unable to turn it off/on. The intersting thing: The field is visible and selectable even in the printer dialog were you can select the fields you would like to print but it remains unprintable.
Again, many thanks, John!

Problem of sending email with attachment by SO_NEW_DOCUMENT_ATT_SEND_API1

Hi experts,
When I sent email with FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' with TXT attachment, I found the there were no new line after each row of the content of TXT file attachment . All the rows in the internal table are concatenated into a string without any new line mark. It damaged the format of my attachment.

You need to concatenate your text with l_c_cr_lf (For enter button or new line) after every 255 char to get new line. Below is the code. Let me know in case of ny clarifications.
CONSTANTS: l_c_cr_lf    TYPE abap_cr_lf VALUE cl_abap_char_utilities=>cr_lf,
              l_c_255 TYPE char3 VALUE '255'.
DATA: l_v_cr_lf TYPE abap_cr_lf,
        l_v_n TYPE i,
        l_v_dif TYPE i,
        l_v_strlen TYPE i.
l_v_cr_lf = l_c_cr_lf.
l_v_n = 0.
LOOP AT fp_i_mail_out INTO wa_mail_out.
    l_v_strlen = STRLEN( wa_mail_out ).
    CLEAR l_v_n.
    DO.
      l_v_dif = l_v_strlen - l_v_n.
      IF l_v_dif < l_c_255.
        EXIT.
      ELSE.
        l_wa_attachment = wa_mail_out+l_v_n(255).
        APPEND l_wa_attachment TO l_i_attachment.
        CLEAR l_wa_attachment.
        l_v_n = l_v_n + 255.
      ENDIF.
    ENDDO.
    IF l_v_strlen > l_v_n.
      l_v_dif = l_v_strlen - l_v_n.
      l_wa_attachment = wa_mail_out+l_v_n(l_v_dif).
      APPEND l_wa_attachment TO l_i_attachment.
      CLEAR l_wa_attachment.
    ENDIF.
    DESCRIBE TABLE l_i_attachment LINES l_v_lines.
    LOOP AT l_i_attachment ASSIGNING <l_fs_attach>.
      IF sy-tabix = l_v_lines.
        CONCATENATE <l_fs_attach>-line l_v_cr_lf INTO <l_fs_attach>-line.
      ENDIF.
    ENDLOOP.
ENDLOOP.

Trouble with sending emails with Road Runner

I have had little luck with sending email from my iPad with Wifi through my Road Runner Account (Central Florida). Apple Support got it to work with the AT&T 3G set as a secondary Outbound server, but I am still looking for a way to send emails with RR with WiFi. The problem may be that there is no way to turn off the authenication feature in the iPad mail setup, and RR here does not require or permit authentication for its outbound mail servers. Has anyone had this problem and found a solution? Why is there not a selection available in the setup for "no authentication" since I can see that there are accounts which do not support it?

If you had the AT&T network set up and on, and the RR still did not work, there must be another problem with sending emails through RR than I have guessed. I have thought the problem was the incompatible Authentication setting, but if you had the AT&T on as an alternative, that should have resolved the Authentication issue. In any event, I have discussed with Bright House (RR), and they do not seem to acknowledge any compatibility issues with the iPad. Hopefully, it can be resolved.

Unable to communicate with printer error with HP Envy 4500

Hi I am having trouble printing with my Envy 4500 printer. My computer system is Windows 8.1. I installed the driver per instruction from the website and use the usb cable to connect the printer. However when I tried to print a pdf document it says "Unable to communicate with printer" and I can't get the test page to print either. Please help! Thanks in advance!

Hi @Casey_Z , and welcome to the HP Forums!
I see you're having issues printing. I would like to help!
I'd recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd then suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problem with Print Email from Web IC

Hello Experts,
I am currently working on CRM 6.0. When i try to print an EMail from Web IC using Print Message Button at the bottom of Email body, I can only find this email in spool rather than printing on printer.
Also I have assigned the printer to my user. Even though `m not able to get the print of the email using Print Message Button. Please Advice.
Thank you.

I have a same problem. I've turned on print immediately, but it still prints E-mails to spool and not to printer. Printing from GUI works ok. Do you have any other advice?
Best regards,
Duško Šorak

Printed emails with skipped lines in message

Printed page has a blank space down the length of a line when printing an email. This happens on the 2nd or 3rd line of th message and ocurrs evry 4-6 lines there after. Unt is about 3 years old and worked prefectly withou any problem until now.

Hi @jimbo525, I would be more than happy to help you with issue you having with your HP Officejet 4500 missing lines of text.
It sound like you are describing Horizontal streaks in your printouts. This document Fixing Print Quality Problems for the HP Officejet 4500 All-in-One Printer Series has the troubleshooting steps to follow if your printout contains horizontal streaks, or other print quality issues. If you determine that it is an issue with the cartridge; you can review the Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies. If the problem cartridge is under warranty, please Contact HP Support for further assistance. Fill in the model number and the form to receive a case number for quicker assistance. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Question #2, following my first: I've now upgraded to Firefox 5.0, but it hasn't helped with printing email.

Despite warnings that downloading 5.0 might do irreparable harm to my Dell laptop, I took the plunge. (A side question on how to double check which version my laptop now has....) That may have helped me to be able to print some downloads obtained from email on Firefox, but I still can't seem to print the emails themselves, even if I save them and then try to print out the download from opening them. To repeat: Dell Inspiron 1545, Windows 7, HP all-in-one wireless printer. Hope I'm expressing all this correctly.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

Problems accessing Yahoo email with Mail on iMac

Hi, I can happily access my emails from Yahoo using my iPhone and iPad. However, neither my MacBook Pro or my iMac (both running Mavericks) can access my emails using "Mail". I can use Webmail on Safari ok, but whenever I try to access Yahoo mail with "Mail", I get a message saying I should re-enter my password, or that the Server is unavailable. I have 2 stage authorisation activated, and "Keychain", and I had to enter a special 'Yahoo-generated' password to allow my iOS units to work. However, each time I use my OSX units, an email says an unauthorised attempt to access my mails has been made.
I've tried deleting the account and reinstalling and rebooting etc, to no avail. I think that Yahoo needs to authorise the iMac and Macbook, but I can't work out how to do it.

Ive found the solution to this problem. Its the secondary sign in system used at Yahoo for unauthorised sign-ins. While its possible to authorise an iPad or iPhone using a special one off password, this cannot be done on a desk top. The simple solution is to switch off the secondary security sign-in option.

Having problem to send email with POP account ...

Hi,
I didn't have that problem before upgrading to my new 3GS iPHone. I have 3 email accounts on my iPhone: POP (videotron.ca), GMail and MobileMe. They all work fine except my POP account.
From the POP account I can receive my email but I cannot send any. Funny enough, my emails are sent when the account is desactivated from my «Mail, contacts and Calendar» preferences on my iPhone.
Can somebody help me ? Regards.
Robert

Hi Robert,
I upgraded with the Iphone 3Gs a week ago and got the same problem with Videotron. The problem is with videotron as usual. If you want to be able to send email from your Iphone just go to Gmail, open an account FREE with them and then use this account to send Email...Work perfectly OK with me. Then of course you will have to phone videotron to make sure your account is fully available when you go on there Web site open the read email and be able to read your email if not solve the problem with them by phone. unless you will be able to send email easily with gmail and mather of fact it is free.
Hope this will help from Quebec to Quebec!!!

I cannot print emails with the recent update of Firefox on my Mac os10.8.5 but I can on my Macbook Pro os 10.5.8 and Firefox 16.0.2. How can I print with #1?

I followed the "HELP" suggestion but it said "server not found"

Hello  ,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
<b>WARNING:</b>Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. 
Please report back to say if this helped you!
Thank you.

Problem with printing emails with IOS 7.

Similar Messages

Maybe you are looking for