Problema cassa posteriore sinistra gigaworks s750

Salve, Possiedo delle creative gigaworks 7.1 s750 nuove da 4 mesi e una scheda creative x-fi extreme music nuova. Ieri l'altoparlante sinistro posteriore a smesso di funzionare. Ho fatto delle prove: ho collegato la cassa sinistra posteriore sul canale destro anteriore e la cassa funziona. Ho provato ha reinstallare la scheda sonora e riccolegato?l'altoparlante e il problema non lo risolto. Ho fatto l'ultima prova collegando le gigaworks s750 al decoder DDTS-100 con cavo ottico?alla console e il canale posteriore sinistro non funziona.Ora ho pensato che il guasto e dal subwoffer. Volevo sapere come mai questo problema?

ti consiglio di portarlo alla creative per un controllo, avevo anch'io dei problemi con il sub dei T7900 e alla fine ho perso piu tempo a fare prove che portarlo a loro. Lo porto oggi e mi levo il pensiero. buona fortuna

Similar Messages

  • Problem with gigawork s750 speakers

    I was wondering if someone could help me? I have the gigawork s750 and x-fi elite pro. When I play music only the center,side,rear left and right speakers play all the songs. When I do the check they all work, but I still have no idea how to make them all work at once? anyone help me would be greatly apreciated
    thanks,
    tuggy

    Can you confirm that the individual speakers are all working correctly by swapping them around to see if the fault follows the speakers or remains on the channel where they were. If the speakers are ok, then there maybe a fault with the sub woofer or sound card. You could check this by using different speaker system to verify the sound card or connect the speaker system to another sound card, but both are time consuming tests.

  • How to use GigaWorks S750 to my laptop??? HELP!!

    Hi
    I'm having trouble with finding the right and best solution to connect my GigaWorks S750 to my laptop.
    I havent got enough outputs on my laptop (my system needs 7.1).
    I need a solution so i can use all 8 speakers. Maybe a external soundcard or something like that?
    Please be kind and help me if you know a good solution. Thanks!
    Danni

    Belindasue01, welcome to the forum.
    When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Connecting DVD-Player with GigaWorks S750

    I'm going to buy a GigaWorks S750 system. Will I need an extra decoder like the DDTS-100 when I want to connect the soundsystem with the Computer (with Audigy 2 ZS Platinum Pro) and one of these things: DVD-Player, Radio, Walkman?
    Thank's for your answers!

    No, I wouldn't bother. You can connect both radio and walkman to two of the line-in sockets on the Audigy's external hub. A DVD player can be connected using the coax or optical inputs. One thing you can't do with the Audigy 2 is use Dolby Pro Logic II for PS2 games. If you don't have a PS2 to connect then, that's not really a problem.

  • Is this a genuine gigaworks s750 system?

    A little over a month ago I purchased a GigaWorks S750 system from Dell, which arrived in a regular brown box with Creative's logo, pictures of the S750 and black writing on it. It looks fine. Recently however, I observed that all the pictures I ever saw of the S750 always showed the shipping package as a multi-colored box. Plus, some of the wording on the box I received are a bit different from what are on the multi-colored box.
    Just out of curiosity, I e-mailed Creative about this and they replied stating that all S750 systems are indeed shipped in Creative's multi-colored box (orange/white with blue writing on it). They advised that I should contact Dell about this since Dell might have shipped me a refurbished S750 system.
    I contacted Dell by telephone about what Creative had said and they told me that first of all, they do not refurbish third party products and second, although I ordered the product from Dell, the S750 was actually shipped from Creative's warehouse. (Product was actually shipped from a company named Tech Data Corp., Technology Drive, Swedesboro, NJ 08085. Country of origin: China. Manufactured date: 0/28/05).
    Please note that I have not even hooked up the system yet. In view of the innumerable amount of problems people are having with the S750, I think I should first get some explanation about this discrepancy.
    Am I the only one this has happened to I need to know whether this is a genuine GigaWorks S750 system or is it a fake, a refurbished set or whatever. I really need to know just to put my mind at ease.
    JC

    JC,
    I have seen S700 and S750's shipped in brown boxes so I would not worry. It may be that since these were for a third party a brown box was decided on as the packaging. I am not aware of any "fake" S750's so I think you are safe.
    Jeremy

  • Loss of sound with the Gigaworks S750 system

    Hi,
    I just recently purchased a Gigaworks S750 speaker system and I ran into a problem. Every-so-often, randomly, my entire system will just stop playing any sound. This last for a random amount of time (5 second to 30 mins). I've triple checked the wires and even taken the system down and re-set it up. I know it'ss not the sound card (recently purchased Audigy 2 ZS) and it'ss not the drivers (updated them many times). I know it'ss a problem with the speaker system itself as I split the signal from my soundcard out to both my headphones and my speakers and my headphones continue to work during the outages. When I plug my headphones into the jack on the control unit of the S750 during an outage, the sound plays through them. Any help you can give me will be greatly appreciated!
    Thanks,
    Riley
    Message Edited by RileyKash on 02-02-2005 02:28 AM
    Message Edited by RileyKash on 02-02-2005 02:28 AM

    It turns out that I was wrong about one thing, once the USB port on the right side of my computer stops working for the US-122, it seems to shut down until I restart the computer. I thought that it worked after the US-122 went down and was unplugged because another device will receive power from the port when plugged in. It turns out that although the new device will power up, it won't be recognized by the computer. I appreciate any help or ideas. Thanks.
    ---Will.

  • How to connect Gigaworks S750 with AUDIGY 2 ZS

    Hello,
    I'm a french user so please apologize for my bad english ;-)
    Well, let's talk about the problem.
    I've bought a GIGAWORKS S750 (occasion) and AUDIGY 2ZS. I tried to connect them but i'm having problem. Let me explain :
    The cable used to connect the GIGAWORKS to the Audigy 2zs have 4 plugs on each side. On the subwoofer i connect the pink/green/black/grey and then on my audigy 2 zs i have to connect 3 plugs (black, grey & pink). But there one more (the grey) which is "alone" and i'm not able to connect it on my audigy 2zs. Moreover, I don't have sound "side" when i used the THX Setup Console, and when i make a test the Rear speakers correspond to the Side speakers...
    So my question is : is there something wrong with the cable i used to connect the gigaworks to my audigy 2zs ? (as i'm able to connect 3 plug on my audigy, why is there 4 plug ?!).
    The guy who sold me gigaworks have maybe forget the good cable ?!
    I can post a pict of this cable if needed !
    Any help would be great...;-)
    Thanks,
    Florian

    well, if you buy a new set of gigaworks speakers, there is a special cable in the box to connect the audigy 2zs (3 to 4 pin connector), which I also use, because I have the same setup.
    you should contact the person you bought the set from, and ask for that cable.
    regards
    K

  • Help connect X-fi Elite Pro with DDTS-100 and Gigaworks s750

    Hi,
    I purchased a brand new Gigaworks s750 speakers system, DDTS-100 decoder and X-fi Elite Pro. I connected the DDTS-100 and Elite Pro using Optical Fibre output from the audio console of X-fi Elite Pro to the optical digital input of DDTS-100. With the cables supplied with s750, I connected it to the Decoder DDTS-100. The problem is I am not getting any sound from the rear speakers and the front speakers. Only the centre speakers and the side speakers are producing sound. I could hear loud hissing sound and very very low volume of the music from the front speakers and no sound from the rear speakers. I can hear good quality sound from the centre speakers and average quality sound from the side speakers. What could possibly have gone wrong with my setup ? Somebody please help me. Thanx in advance.

    Hi Richie,
    Thanq for your response. But unlike what you have mentioned, ("what may be happining is the soundcard is decoding the signal and then the ddts is trying to decode it with disatrous results"), In my setup the signal is not getting decoded two times, once by Soundcard and once by the DDTS-100. As I have mentioned that I am taking out an Optical Signal from the sound card to the DDTS-100, the signal comming out from the sound card to the DDTS is Encoded signal only. So there doesnt arise a chance that the signal is getting decoded twice. Can you think of any other reason why my setup is not working? Please let me know.
    regards,
    Rahul M

  • GigaWorks S750 7.1 - Interference and Volume issue

    Please provide assistance,
    I recently purchased a the Gigaworks s750 along with Creative's Sound Blaster Audigy 2 ZS.
    Here is the problem I am encountering:
    When using it for any type of audio, DVD playback being the worst, I get a great deal of interference when turned up past 50% volume on the Gigaworks controller. And to get any sound, I have to have the volume of the controller connected to the sub at a minimum of 50%. If there is no audio, when turned up the interference is totally unbearable.
    I have the audio on my PC turned up to 100%, and this goes for every form of audio controller on my PC. If any one of these audio controllers on my PC are turned down, I get very little audio out of the speakers at all?
    Is there anyway to get rid of this noise? I would like to have my DVD movies or games with the ability to play at a reasonable volume and be able to hear the fine noises that make a surround sound system worth purchasing. At this point when turned up, 80-100% of volume on sub volume controller, I get so much interference that the only time I can hear decent quality sound is when the sub and music are loud enough to cancel out the annoying interference?
    Please help?
    Sincerely,
    Poor creative customer

    I would recommend the G550W if you don't want to risk the S750, I have an S750 set, had to have the sub replaced a single time, but was no trouble at all and only took like 4 or 5 days for the new one to arri've, sets been running perfect for more than a year now

  • Gigaworks S750 + Audigy1 - Only hear left channel in left and right speakers

    Since last week I'm the proud owner of a gigaworks S750. Since my new computer went RMA I decided to hook it up on my old computer with an Audigy (SB Audigy E400) audio card.
    The original Audigy drivers come with this test program that tests all channels saying "front left", "front right" etc etc through the respecti've speakers.
    However, when running this test program I hear the "front left" message through both the front speakers, and the "rear left" message through both the side speakers.
    The "front right" and "rear right" messages I don't hear.
    I've been looking through the settings of the audigy and reading the manual of the Gigaworks set, but nothing turned up.
    My old Philips 4.1 speakerset did not have this problem, so my guess is it's something with the gigaworks.
    Thanks

    U sure the speakers are set to 7.1 ? BTW u need Audigy 2 ZS or Audigy 2 Platinum to make all your speakers make the correct sounds. BUY A NEW SOUNDCARD!!!
    Message Edited by DexterLabs on 02-06-2005 01:30 AM

  • GIGAWORKS S750 7.1 malfunction solved?

    Hellow everybody!
    I have read a lot about GIGAWORKS S750 7.1 sub malfunction. I would like to buy a sound system, and I think this is a great one but as I said there are a lot of post with the same malfunction.
    Is this malfunction solved, or it have the same problem yet?
    In spite of buying 7.1, would be better to buy the GIGAWORKS G500 5.1 Does G500 5.1 have the same problem?
    THANKS!

    I would recommend the G550W if you don't want to risk the S750, I have an S750 set, had to have the sub replaced a single time, but was no trouble at all and only took like 4 or 5 days for the new one to arri've, sets been running perfect for more than a year now

  • Gigaworks S750 front channels cutting out/clipping

    I'm having a problem with my Gigaworks S750. It works perfectly at low volume (~30% or less). Above that, I get horrible clipping, cutouts, and digital chatter out of the front channels. Audio passed out the headphone jack is fine regardless of volume.
    I cracked open the sub and looked for burnt electronics and popped capacitors... didn't find any. I did notice that the plastic wrap on 2 of the 3 transformers looked darker than normal.
    Any suggestions?

    I have exactly the same problem, but I still didn't open the sub, i think everything fine there too...
    I li've in Moscow, Russia and I don't know where to get fixed it even for money, anybody help!
    I really love this speaker system and i don't want to have anything instead of it....

  • Gigaworks S750 Power Requirements

    Hi,
    I'm planning to purchase the Gigaworks S750 to use in my car, which I can link up to the X-Fi PCI Card I have in my car's computer system and I was wondering what the power requirments were.
    Could someone please post details on the Gigaworks S750 power supply:-
    Input and Output; Voltage, Current, Frequency and any other possible details.
    Hopefully this system might be able to run of the power inverter I currently have installed, which takes 2V from the battery, converts it up to 240V then the PC and Power Supply for my current Inspire System converts it to the required amounts for input.
    I was expecting to have to upgrade my power inverter, as it's only 600W constant and 800W at peaks. The PC System takes away around 250-350W leaving only 250-350W for the speaker system.
    I expect I'll be upgrading to a KW Power Inverter, but if needed I can always go with the 2.5KW Inverter; just hope my cars alternator can produce enough juce.

    Thanks for the info, that's all I needed to know. Looks like the Gigaworks S750 is going to need between 660W-720W of power, so a KW inverter should cover it.
    I've considered using a car audio set-up, but they typicaly only have 2 channels. Atleast with the Gigaworks S750 I'll be able to expereince the full 7.1 surround sound experience. I'm probably not going to be going to keep my X-Fi card for long though, it's entertainment proccesor has gone faulty and I no longer have any Rear-Left sound for some strange reason? So I've switched it to the gaming mode proccesor for the time being and all channels are now working once again.
    Personally, I think the X-Fi is too advanced for it's own good, so I'm going to RMA it and downgrade to a slightly less advanced 7.1 sound card, which hopefully won't encounter those sorts of problems. As I've done some re-search and people have had all kind's of problems with X-Fi sound cards.
    Thanks for the recomendation though, but I find the computer far more usefull than any other car audio set-up's. I have wireless internet access which automattically connects to the nearest wireless access point, typically with-in 50 meters, using a 9Dbi antenna. The computer also has a DVD player, TV and FM Radio, a 60GB hard disk, a small touch screen LCD mounted on the dash, GPS with voice directions and many other random features which I personally would rather not do with out.

  • Sound Blaster Sound Cards and Gigaworks S750

    I recently purchased a Sound Blaster Zx sound card and found that it only supports up to 5.1 speaker configurations. That means I don't have sound from my side speakers in my Gigaworks S750 7.1 system. Needless to say I am very disappointed with Creative Labs engineers wondering why 7.1 support has been dropped from their very own speaker systems. I am posting hoping some more knowledgeable forum members can offer a better solution to my dilemma.
    I could go back to my X-Fi Extreme Music card which has all of the 3.5 mm minijack speaker connectors but I would rather not do this as support for this card has been dropped and I am doubtful that there will be many more driver and/or software updates available. I would also rather not buy a new speaker system b/c I am happy with the Gigaworks and don't really want to replace it.
    I looked going back to an older Titanium HD soundcard but it only has RCA connectors on the back of the soundcard and the Gigaworks connectors are 3.5 mm minijacks. The Gigaworks has no optical or HDMI connectors anywhere. I wonder....can I connect the 3.5 mm jacks from the Gigaworks to the RCA or optical ports on the ZX or Titanium HD with an adapter or converter? Does Creative sell new cables or adaptors, or any special audio shop for that matter, that would make the connections work?
    Can anyone help please?
    Thanks!

    As I said, that upmix is only a workaround, you still have just 5.1 discrete channels, just that the rear and sidespeakers emit the same sound.
    I don't have any experience with Asus or Auzentech. Both have their issues as well but they are both very good and only the very best creative cards (X-Fi Titanium HD, ZxR and perhaps X-Fi Elite Pro) can compete.
    On the other side Asus has most of their cards in production for half a decade without alteration and doesn't update their drivers very often as well. Their don't be as many issues as with creative cards, but you will find people having problems as well, it's not like they work flawlessly for everyone.
    Same for Auzentech, only they didn't produce as highend cards as Asus and some Creatives (Titanium HD and ZxR only) plus while their dirver support seems to be good, their other support is nonexistant, especially since they seem to have stopped producing soundcards. Additionaly I have heard of the X-Fi Forte mysteriously dying on many people after some years.
    The differences aren't great, though, and in my opinion you won't find a soundcard combining everything to perfection. The ZxR nearly does, only lacking 7.1 output.
    The Asus Xonar STX is very similar, but can only ouput analoge stereo, while the PCI-based ST can output the very best analoge 7.1 available with a additional daughtercard (but who wants a PCI card nowadays?).
    The best 7.1 cards from Asus, D2 and D2X, lack a Headphone-Amp, while the Xonar Xense and Phoebus, being nearly identical to each other, have one but use a slightly lesser DAC for all channels apart from Stereo, similar to the Auzentech X-Fi Forte and Bravura.
    The D1 and DX finally are only slightly better than the X-Fi Music and Titanium, because they use a slightly better DAC for Stereo, which is used on Audigy 4 Pro and X-Fi Elite Pro for all channels and for stereo on the soundblaster Z and Zx.
    Everything below (Xonar DG(X) and DS(X)) ist far inferior, though the DG(X) sports a cheap headphone-amp even the D2X lacks.
    So, if you only want 7.1 as good as possible, the Xonar D2X is the best solution, followed by the D2, Auzentech X-Fi Prelude and Creative X-Fi Elite Pro.
    But, if you want to drive very good headphones, too, the Xonar Xense, Phoebus and Auzentech X-Fi Forte will be the better solution.
    None of them will be as good as the ZxR, if you can live with discrete 5.1 only.
    The minijack cables aren't an option. Just when you connect your Gigaworks to any Asus, Auzentech, Creative X-Fi Titanium card or most onboard codecs you have to use 4 stereo minijack cables, while for any Creative 6.1/7.1 card from Audigy 2 to X-Fi PCI-series you have to use a special 4 stereo to 3 4-pin minijack cable, which probably came with your gigawarks set.
    If you want to use any "normal" sound card you don't need any special cable, it's just 4x any normal stereo minijack cable.

  • Gigaworks S750's and X-Fi Titanium

    I have noticed that the X-Fi Titanium card has the same speaker connection system on the card as it does on the back of the subwoofer on the Gigaworks S750s ie there are 4 connections to on each labeled the same on each device........the problem is my 7.1 surround sound chord that came with my speakers a few years back have the 4 prongs on one end but only have 3 prongs on the end that connects into soundcard.....these speakers were made with the non pci-e version of the soundcard in mind while the new pci-e card supports all 4 connections on the back. Hpow do I go about in getting an updated cable to fit the new soundcard with all 4 connectoins? I want a cable that has all for connections on each end. The old chord has 4 on one side and 3 on the other.....the side that has the 3 prongs had the gray colored prong merged. Im looking for a new 7.1 sourround sound connection cord that connects the soundcard to back of the subwoofer with all 4 connections on each end/ Does Creative make such a chord now that the new pci-e soundcards are out? If so is there a way to purchase it seperately without having to buy a whole new set of speakers again? Ive had these speakers basically for about 3 years and absolutely love them but I will not spend 500 bucks on a new set to simply get an updated chord.............

    Sorry to be a bit blund on this but why don't you just go to the next hifi shop and get yourself some suitable piece of cable? or get some good audio-cable with 8 wires and solder the connectors (which you can also get at any hifi store). this is very cheap and saves you a lot of hassle with the not very supportive creative support...
    The selfmade stuff has of course not as high a quality as a good, proffesional audio cable (which usually is very expensive) I would probably compromise and buy 4 stereo 3.5mm male to male cables like these and just tie them together with some velcor cable ties or something like that. this is relatively cheap and still you get sort of acceptable quality.

Maybe you are looking for

  • How do I open a Crystal Report from Microsoft Access?

    I'm looking for step-by-step instructions on how to launch a Crystal Report from a Microsoft Access application (for a dummy like me). My Crystal Report uses a connection to the Access database as the data. I have Microsoft Access 2002 with Microsoft

  • Using dbms_metadata to get defination of large table

    Hi, I have very very large table definition table with partitions and sub-partitions and I want to create that table in some other db. I am trying below spooled query but its not retrieving complete definition of the table, any other setting I should

  • No Results after build a Parent-Child Hierarchy in OBIEE11G

    Hi All: Here's an problem. I followed the "http://sandybi.wordpress.com/2010/08/17/hierarchies-in-obiee-11g-part-1/" this article step by step to create a parent-child hierarchy in admin tool in OBIEE11G. But after check in and try to retrieve the hi

  • Import error IMP-00058

    Hi, I am importing a dump file into oracle 9.2.0.4 using import utility. I fired this import utility in nohup mode. It imported 5 tables and then took about 6-8 hours to import the biggest table and failed with the following error messages: IMP-00058

  • VIDEO CONVERTER & ALBUM ART...someone help me ple

    i have troubles with my video converter...it always show me the error thing...but not saying why cannot be converter only that it cant...and also i wanna know how to put album art thank u[img"]http://forums.creative.com/i/smilies/6x6_smiley-very-happ