Problems in transport of Transfer rules

Hi
I am trying to transport my objects from development to production. The problems is that not all the objects are getting transported. the cubes and infoobjects are going fine but the transfer rules and communication structure are all pointing to my development source system and hence fails during transport.
How can i transport my transfer rules without specifying the source system or point to my prodcution source system?
Regards
Sujai

Source systems are not transport portable. They have to be created in your BW_PRD system.
Assuming you have the source systems created in your BW_PRD system, example R3_PRD. then you need to do the following.
In BW_DEV you have datasources mapped to your R3_DEV system. So you need to tell your BW_PRD system that any transport with a source of R3_DEV, change it to R3_PRD.
Go to your BW_PRD system, log in and go to transaction
Go to RSA1.
Then go to the menu bar and select Tools -> "Conversion of Source System names"
You may have no entries, if you do not, hit "New Entries"
Then in the "OriginalSource System" box type in the name of your development R3 system, example R3_DEV. then in the "Target Source system" type in the name of your production system, example R3_PRD.
Save, exit and re-transport all the parts.
That should do it.
I made the assumtion that you are in 2004s/BI7.0. If not go to the RSLOGSYSMAP table and do the exact same steps.
Note: This is normally a basis function, and you will need pretty elivated rights to do this in your production environment (well you should ).
Hope that helps....
Ali

Similar Messages

  • System copy problem...No transfer rules available

    Hi ,
    We are facing a problem in getting the Transfer Rules...
    1.we did a system copy from PRD system and created a Sandbox system .
    2.After the system copy the problem came from the source system.....i.e for the datasource's in the table RSOLTPSOURCE the mapping is showing for 2 systems....CRM PRD system & CRM SANDBOX system....
    3.Coz of this issue the Transfer rules are not available and the all the DS are inactive......
    4.I tried with the FM RS_TRANSTRUC_ACTIVATE_ALL but im getting message as no transfer structure is available.
    5.When i tried to manually activate the DS from BW side it is asking to create TRANSFER RULE.
    Please help me to sort it out.....
    Thanks in Advance
    BASKAR

    HI ,
    I also raised a OSS to SAP ....what they suggested is....
    According the logs in BWS there was definitely a systemcopy from BWP to BWS, but the BDLS logs looks very strange, which actually did not converted anything, because the administration tables containing some very strange entries.
    Lets take the datasource 0crm_sales_act_1 for example. If you check this datasource in table RSOLTPSOURCE you can see, that it exists currently for both source systems:
    OLTPSOURCE LOGSYS OBJVERS
    0CRM_SALES_ACT_1 CMPCLNT501 A
    0CRM_SALES_ACT_1 CMSCLNT501 A
    Unfortunately the root cause of this is unkown, but most probably it is caused by an improper copy procedure, where the consulting note
    886102 was not followed.
    To solve the problem, please follow the below steps:
    1. Implement note 1405233 and 1336119 to your system 2. Go to RSA1 and delete the source System CMS.
    3. With function module rsar_logical_system_delete delete the source system CMP:
    I_LOGSYS CMPCLNT501
    I_FORCE_DELETE X
    I_NO_TRANSPORT X
    I_NO_AUTHORITY X
    4. In your productive BW (BWP) please create a transport request which contains all the source system dependent objects for CMP. Please check note 886102 scenario B3 step 2 for details.
    5. In BWS, please recreate the source system to CMS and activate it but please do not replicate the datasources yet.
    6. In BWS please maintain the table RSLOGSYSMAP and map CMP to CMS and import the transport request created in step 4.
    Please be aware, that such a constellation happens mostly, if some steps are missed or are not carried out properly from consulting note 886102. Please get in touch with your basis colleagues and provide them this note, so the next time such a problem does not occur.
    I hope this helps to solve the problem.
    Thanks
    BASKAR

  • Problem while transporting transfer rules in BW 3.5

    Hi All,
    I have a problem while transporting transfer rules in BW 3.5.
    I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
    The selections   T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
    Diagnosis
    You need to select an individual DataSource based on the selection conditions
    InfoSource =
    Source System =
    Object Version = T
    Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
    although the select event is not unique.
    Procedure
    Check the objects to which the selection applies.
    Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
    Message no. RSAR436
    Diagnosis
    Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
    However, no DataSource mapping refers to this transfer structure.
    System response
    The transfer structure was not activated or deleted.
    Procedure
    Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
    Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
    Regards
    Lakshmi

    Hi Lakshmi,
    Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
    Also make sure that the Transfer rules are active before it is transported.
    Hope it helps!
    Regards,
    Pavan

  • Missing Transfer Rules in Selection Window for Transport

    Hello,
    Can somebody tell me why certain transfer rules are missing in the object selection list of the transport connection window?  I am using BW 3.5.
    Problem details:
    I want to transport a transfer rule from a DEV box to a QA box.  In the transport connection window, I clicked on "select objects" from under transfer rules in the middle panel.  The object listing that followed showed only objects that start with numbers; no object we defined locally that starts with Z was included. 
    I also noticed that this appears to be a "funny" problem.  One other computer connected to BW shows the correct listing while still another shows a different listing.  Has this got to do with any setting? 
    Please help.
    Wernel

    Hi Wernel,
    Its better to activate ur transfer rules once again. Also this Z*  TRs would be displayed in last row of the Pop up window in the select Objects list.
    or select them by grouping as before dataflow by selecting InfoSoruce.
    Assign points if it helps...
    Regards,
    ARK

  • Cannot transport transfer rules!

    Hi,
    We have a problem transporting the transfer rules from BWD to BWQ.
    Here are the steps I did :
    New object ZZRANK was added to user exit on R/3 dev. and transported
    New infor object ZZRANK was created in BWD
    ZZRANK was added as attribute to 0PLANT (mater data)
    Transfers were created and comm struc updated.,  
    testing was successful in Dev,  r3 changes were transported to Q and BWD transports to BWQ.  ALL info objects transported successfull but the transfer rules failed.  Cannot determine why.,
       Start of the after-import method for object type R3TR ISMP (Activation Mode)
       Mapping between data source 0PLANT_ATTR and source system PR2200LS is inconsistent
       Field ZZRANK will not be delivered from DataSource 0PLANT_ATTR in source system PR2200LS
       Mapping between data source 0PLANT_TEXT and source system PR2200LS is inconsistent
       Field KEY1 will not be delivered from DataSource 0PLANT_TEXT in source system PR2200LS
       Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
       The errors affect the following components:
          BW-WHM (Warehouse Management)
    Any help is appreciated.

    You may have to replicate your data source on BWQ.
    First replicate and then send your transport again from BWD to BWQ.
    Regards.
    Sanjay
    Message was edited by:
            Sanjay Sinha

  • Transport Error while moving Transfer rules - RS_ISMP_AFTER_IMPORT for object type(s) ISMP ( )

    Hello Experts
    Strucked up with an issue while transporting the Transfer rules that are created for an UPFILE source system.
    Transport is included with  list of Data source Replica, Transfer rules, Transfer structure and Info Package.
    My data Source : ZVPRCRDT for an UPFILE
    Below is my error screen :
    Tried to resolve the error by moving the Data source Replica as an individual Transport.
    Still see the same error and my data source is active in the current system.
    Looking for a resolution to find out the root cause.
    Any help is appreciated...

    Thanks for your response Ram.
    My Source System UPFILE is in active mode.
    Unsure why system is throwing error as source system assignement was inconsistency.
    All fields are mapped perfect with one-one relation.
    Worked by reassigning the UPFILE - source system to the data source but still i m seeing the same error : Data Source doesnt exist in source system of version A.
    Transported the DS alone to Quality initially where i m unable to find the transported data source in my quality(target). DO i need to perform replicate meta data ...something like that in quality so that imported data sources will get refreshed?
    If so can you let me know the approach.
    Thanks

  • Two issues: activation of transfer rules and data load performance

    hi,
    I have two problems I face very often and would like to get some more info on that topics:
    1. Transfer rules activation. I just finished transport my cubes, ETL etc. on productive system and start filling cubes with data. Very often during data load it occurs that transfer rules need to be activated even if I transport them active and (I think) did not do anything after transportation. Then I again create transfer rules transports on dev, transport changes on prod and have to execute data load again.
    It is very annoying. What do you suggest to do with this problem? Activate all transfer rules again before executing process chain?
    2. Differences between dev and prod systems in data load time.
    On dev system (copy of production made about 8 months ago) I have checked how long it takes me to extract data from source system and it was about 0,5h for 50000 records but when I executed load on production it was 2h for 200000 records, so it was twice slower than dev!
    I thought it will be at least so fast as dev system. What can influence on data load performance and how I can predict it?
    Regards,
    Andrzej

    Aksik
    1 How freequently this activation problem occurs. If it is one time replicate the datasource and activate thetransfer structure( But in general as you know activation of transfer structure should be done automatically after transport of the object)
    2 One thing for difference of time is environmental as you know in production system so many jobs will run at the same time so obiously system performance will be slow compare to Dev System. In your case both the systems are performing equally. You said in dev system for 50000 records half an hour and in production 200000 records 2hrs so records are more in Production system and it took longer time. If it is really causing problem then you have to do some performance activities.
    Hope this helps
    Thnaks
    Sat

  • Transfer rules of export datasource will not activate

    We are on BW 3.5
    We have an export datasource from an ODS that existed that we are regenerating and ultimately pointing to a different cube.  When the transport was created in development, the infosource, transfer rules, transfer structure and communication structure were all on the transport.
    When it got to test, the transport got a '12'.  The transfer rules said active, but the datasource was not.  Runnint RS_TRANSTRU_ACTIVATE_ALL yielded (and still does) the error:  "No versioning for PSA table"  Error Message: RSAR023
    We tried regenerating the export datasource.  That took the transfer rule reference out of table RSISOSMAP and made RS_TRANSTRU_ACTIVATE_ALL fail because it couldn't find the transfer rules at all.
    We have tried reimporting. 
    We have tried replicating.
    We have tried regenerating.
    We have tried sending the datasource replica and datasource.
    Nothing is working and it's holding up a large effort underway.
    Any thoughts???
    Note - we had another ODS with the same situation and we did the same thing and it is active.  The only difference is that for the problem export datasource the underlyingn ODS itself was also transported.

    Hi,
       First transport the ODS and Replica of the datasource to quality. Check whether the ODs and replica 8* object is active.
    Replicate them and regenerate them.
    Then transport the transfer rules and update rules in the next transport and try activating them.
    Thanks,
    Arun.

  • Transports(transfer rule)Problem

    Hi Experts,
    Bi Patch :16   BI_CONT :8
    We are moving from DEV to QA.i ve transported infoareas,infoobject catalogs and infoobjects.
    now im trying to transport master data infosources UR and transfer rules.
    im collecting the objects in the following manner.
    Ex:0material
    Grouping :in data flow before
    collection mode : automatic
    Here im unable see the transfer rules but UR and infosources are there.(in transport connection screen)
    Conversion of logical system names
    in Dev i didnt maintain any thing
    in QA i ve mainted Conversion of logical system names as
    *Original S S            Target S S
    BI DEV                     BI QA
    R3 DEV                    QA DEV
    I havnt chkd the box 7.0.
    Assgnment of source system to  source system id
    here i clicked on suggest source system ids
    i ve AU and AU.
    Even i did a trail with transporting the request to QA but no luck it ended with error 4,but not getting anything even info source or UR etc.........
    Plz help me,suggest me solution its very urgent.
    Thanks,
    Yunus

    hii check the foll links and award some points
    Re: Transfer rule error
    Re: Transfer structure problem

  • Error when transporting transfer rules

    Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
    Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
    AND
    Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
    I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
    Thanks in advance.
    Diego Lombardini

    Hello Diego
    Do you choose the correct Transfer Structure in DEV?
    I mean the one that is assigned to EMP300.
    Are you saying that your PROD have the following:
    0customer_text_BA
    And that your DEV only have the following:
    0customer_text_BB
    If the answer to the above questions is YES;
    Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
    I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
    Use it with caution and do not mass transport when you use this option.
    Good luck
    /FZA
    Message was edited by: Fariborz Zangoui
    Message was edited by: Fariborz Zangoui

  • Problem in activating Transfer rules

    Hi Experts,
                          I could not able to activate transfer rules using program "RS_TRANSTRU_ACTIVATE_ALL" by giving source system name and Infosource in Quality system.I am getting success status "No Transfer Structure Selected" but still transfer rules are in inactivate.I tried replicating  data sources also still problem persists.
    Please provide any suggestion how can i go about it.
    Edited by: Sunilbm on Oct 30, 2009 12:16 PM

    Hi,
    Is there any error message when the transfer rules are transported from Dev to Quality?
    Are the transfer rules transported from Dev to Quality successfully.
    Post the message if any when the transport request is moved from Dev to Quality.
    Regards,
    Rama Murthy.

  • Problem in mapping Infoobjects in Transfer Rules

    Hello Friends,
    I need your help regarding following issue:
    I installed ODS named STABILITY STUDY : INSPECTION RESULTS QUANT. DATA  (0QM_DS02) from Business Content.
    The ODS & Update Rules have been installed properly.
    Few infoproviders had been already installed at the time of implementation, hence majority of the infoobjects existed from before. Only few were new.
    Now when i tried to map transfer rules, newly installed infoobjects are not seen in data source.
    The data source is 2LIS_05_QE2 and few of the infoobjects not being mapped are:
    Sum of Target Value (0SUMSOLLW)
    Target Val.Available (0IND_SOLLW)
    Phys. Sample Number (0PHYS_SP)
    Inspect.Lot Origin (0LOT_HERK)
    Inspection Method (0PMETHODE)
    Plant of Insp. Meth. (0PPLANT)
    Insp. Meth. Version (0PMTVERSION)
    Can any one suggest me how should i proceed??
    Regards,
    Anuradha Vakil

    Dear Anuradha,
    Before installing transfer Rules or infosource first u have to install the datasource in source system and replicate it into bw.
    If u have done this already then u want to map some objects in transfer rules then u have to check whether those fields available in the datasource , If they are available then goto transfer structure click datasource/transfer strucature tab there right side box u can see the unmapped fields in black colour move them to right side then go to transfer rules map those fields to infoobjects.
    If the fields are not there in the datasource u cant do any thing just activate the transferrules.
    Assign points if it solves ur problem...........or clearly reply what is ur problem.
    Best Regards,
    SG

  • Unable to find the Transfer Rules in Transport Connection

    Hi Guys,
    I am on BW 3.5.
    I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
    I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
    Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
    Please help me on how to include this object in the Transport request created.
    Thanks in advance.
    Regards,
    Tyson

    Another way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
    Cheers,
    shana
    Assigning pts is the way of saying thanks in SDN

  • Problem with the active version of the transfer rule ABAP program with sour

    Hi,
    I have a problem with the active version of the transfer rule ABAP program with source system EXCEL. 
    The system does not react to changes done in the transfer rule coding. For FISCPER I have hardcoded the result 'BABABA' and still the results delivered are those from the CSV.
    Resetting the system buffers does not help. The problem is systematic in combination with source system EXCEL (i.e. not only 1 InfoSource).  Checking the active program Extras->Display Program shows the coding (result='BABABA') being there, but
    as stated, the system does not produce the result BABABA, but instead the result of the CSV.
    It seems as if the original version from the very first activation of the transfer rule program remains somewhere and continues to be used.  Does anybody know how to flush it out and get the system to actually use the coding appearing as the active program.
    I have posted an OSS note, but SAP takes it time to answer and I am under time pressure so I figured that maybe one of you know who to solve it before SAP does.
    Greetings and thanks,
    Martin

    Hi martin,
    just try to go out the RSA1 and then return to your infopac. ...
    sometimes there some "cache" trouble

  • Cannot See Transfer Rules in Transport Connection

    Hello,
    I have searched Notes and Forums and have not found a solution for this!
    I performed some configuration in our newly upgraded BI system. We
    were on BW 3.5 and upgraded to BI 7.0
    We also change how our landscape was interconnected.
    Our BW Dev system used to connect to our R3 Sandbox system.
    Now our BIDev system connects to our ECC Dev system.
    This is the first project i have worked on since the upgrade was
    successful. What I am finding is that I get the following transport
    error when I look at the STMS logs from BID to BIQ.
    Transport Error
    Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
    There is no DataSource with these attributes
    Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
    No activation possible.
    Here are the details when I click to get more info on the error message:
    Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
    activation possible.
    Message no. RSAR436
    Diagnosis
    Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
    system.
    However, no DataSource mapping refers to this transfer structure.
    System Response
    The transfer structure was not activated or deleted.
    Procedure
    Ensure that DataSource mapping, with a reference to the transfer
    structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
    the transport connection to create a consistent request.
    Wierd Behavior
    The big issue now is that when i go to the transport connection in RSA1
    and I want to collect Transfer Rules, I see a small subset of all the
    transfer rules I would expect to see. I am looking specifically for
    the transfer rules: 1_CO_PA2900010_DS PCDEVC200
    Similiar behavior occurs when i am looking for "3.x DataSources" in the
    transport connection
    I can see these rules in other areas of RSA1 such as Infosources.
    Please assist with finding these transfer rules in the Transport
    connection.
    Other then this transport both ECC and BI system landscapes are up and running normally.
    Please help
    Thanks!
    Nick

    Bryan,
    Thanks for jumping onto this thread.  I am going to complete the transports and see if i have any system name conversion issues to address.  I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
    To answer your questions:
    1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
    Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS.  The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
    2. To what Source system do the transfer Rules belong to that you are missing?
    ---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the  missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
    3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
    ---Bryan:  The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
    Thanks!
    Nick
    Edited by: Nick Bertz on Dec 21, 2009 3:11 PM

Maybe you are looking for