Procurement storage location in bom

I am having one raw material bom and I want to have different storage location than maintained that of maintained in material masrer for raw material.
how it is tobe done?

Hi,
You qerry is not clear, but the below may help you.
If your query is about the two storage locations in Material Master MRP 2 view then :
1. Issue storage location : If you mention any storage location here that will be defaulted for the goods movement transactions you perform, even it is copied to production order also.
2. Storage loc for EP : It is to used for external procurement.
If your query is about the storage locations in BOM then :
In BOM item details field you can mention storage location which is used for goods issue. The same is copied to Production Order. This will be given the first preference over the Material Master MRP2 issue storage location.
If your query is about maintaining two storage locations for a Material then :
You can use Tcode : MMSC to extend the material to multiple storage locations.
Hope this will help you.
regards
radhak mk

Similar Messages

How to block movement type 261 and 262 from several storage locations

Dear Expert,
Can we block the 261 and 262 movement type from several storage locations? These storage locations are not affected by the MRP run, where for the materials that have been moved to these storage locations their existance are not count. These storage locations could not be used for confirmation production order, therefore i want to block 261 and 262 movement type from these storage locations.
Thanks
Pauline

Dear Pauline,
if my understanding is correct abt ur query,
1) you want in confirmation screen, Consumption should happen only from one storage location
2) Rest all storage locations should not be allowed
3) Maintain Storage location in BOM component view, in mass you can maintain in CEWB
4) Now GO with SHD0, Make storage location field as Out put only, for CO11N Transaction
Plz refer this link for SHD0 Demo
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
Regards
Madhu Kumar

Storage location in Purchase requisition

Hello, I have a MRP area type storage location and i cannot have a storage location in the purchase req when the requirement is coming from this storage location. When converting to PO, the storage location is populated from mrp area data.
In MRP area I have external procurement storage location filled.
Any ideas what's missing?
Thanks!

hi,
When you do MRP at the storage location via using the MRP, then it is meant that PR or Any other document shd be generated for the given storage location...This is because, if there is any shortage at the storage location level, then system will run MRP and will generate document for the required storage location only, but not for the other...
Now if you don't want PR to be generated for the storage location, then you shd directly generated the PO only...
Regards
Priyanka.P

Order Confirmation user exit for storage location

hi all
while confirming order, no one should select any other storage location other than fix : 1003,
user selects 1001, 1002, 1003.
actual posting location is 1003..
Can i control this activity with the help of user exit ? if yes please suggest.

Hi,
You can maintain Production Storage location in BOM as well as you can maintain also in Material Master--> MRP-2 View--> Production Storage location.
So system will by default take the respective storage location and user need not select each time manually.
For this purpose, you need not implement any exit.
Revert in case any doubt.
Hope this solves your problem.
Regards,
Tejas

Storage location issue in case of BOM

Hi All,
I have a issue related to storage location determination. There are three materials X,Y and Z. Material X is main item and Y, Z are components of X. While creating sales order when we enter X it explodes BOM. Now in customizing for material X and Z storage location has been determined as SL1 but for material Y SL2 is determined. When we create delivery system automatically proposes storage location for all materials as-
Material X- SL1
Material Y- SL1
Material Z- SL1
For material X and Z it should be SL1 (which is coming right) but for Material Y it should be SL2 (but its coming as SL1 automatically)
I've checked every area right from the combination of plant, shipping point and storage condition (storage condition is different in case of Material Y). There are also no stock determination rules defined in item category and material master. SL req. and determine SL is marked for item category of each line item.
Please help me with this issue

Hi,
The system proceeds during BOM explosion to determine the issue storage locations follows:
In oppr
If you set indicator 1 Only components, the system checks to see whether the issue storage location has been maintained in the material master record of the components and uses this storage location. This storage location is then used as the withdrawal storage location and is displayed in the component list of the planned order.
If you set indicator 2 Only assembly, the system checks to see whether the proposal withdrawal location has been maintained in the production version of the assembly or finished product. If this has been maintained, the system uses this withdrawal storage location for all components and displays it in the components list in the planned order. If no proposal withdrawal location has been maintained, the system uses the assemblys receiving storage location as the withdrawal storage location for the components.
If you set indicator 3, the system first proceeds as for indicator 1 described above. If it cannot find a storage location using indicator 1, it then proceeds as described above for indicator 2.
If you set indicator 4, the system first proceeds as for indicator 2 described above. If it cannot find a storage location using indicator 2, it then proceeds as described above for indicator 1.

Default Storage Location of Child items in BOM

Hi Experts,
We are facing a problem, when we create BOM, we have to manually put default Storage location (Backflush Storage Location) in each of the line item. Can somebody suggest me some solution sothat it should come automatically in all the line items.
Ishu

Dear Ishu,
1.Backflushing storage location can be set either in the material master in MRP 2 view or else in the BOM under status/Long text
tab page.
2.The reason why SAP has provided this option at 2 places is if the material is always backflushed from the same storage
location for any assembly(assuming if this material is used in diferent assembly) means you can set it in the material master.
3.If it's BOM or assembly specific means,set it in the BOM.
4.You have to set this if the backflushing storage location is getting varied for the same component for different assembly
structure.(This system will not propose automatically).
Regards
S Mangalraj

MRP run BOM explosion acc to storage location

Hi,
I got two finished parts i.e X & Y and a component A which is being used in bothe X & Y.
But the component A is stored in two different storage locations which are P & Q respectively.
So will it be possible that when I run MRP for X it should pick up stock from P and when I run MRP for Y it shoul onle pick up from Q not from P.
Thanks
Kumar

Hi Kumar,
Since your are running MRP for Plant Level, it consider plant level stock for components.
if u want MRP donot consider stock for particular storage loaction, U have to make system to plan at MRParea Storage loaction level for Components.
Do the following settings,
1.Create Two MRP areas of stoarge location Type (2), and assign the component issue storage location accordingly.(Ex MRPAREA1 = P and MRPAREA2= Q) in SPRO
2 Assign TWO MRP Area for your Component (A) MRP view of materla master and assign issue storage location in "MRP 2" view of "MRP Area"
3. Assign issue storage loaction in BOM item for Header Material.(For X iss loc of A= P and For Y issue loc of A = Q)
4.Now run Mrp for your Header Material(X,Y), system will consider stock for A Only from "P" while run MRP for X, Bcz it will consider storage location from MRP area only
Please try and come back. Is it possible to create MRP area for your Component .
regards
pradeep

Issue Storage Location in Components details Subcontracting PO

Hi all
I need to implement this process in SAP:
I have to send material X, from storage location B 'broken', to my supplier for repairing. After He has repaired it I post good recipe of material X in the storage location A 'adjusted'.
I plan material X through MRP at plant level only for storage location A.
In the material master I've set procurement type 'F' and Special Procurement '30'.
I created a recursive BOM for material X where I entered, for component X, B as issue storage location.
In this way MRP run (with '1' as value of 'Create PR' parameter) creates subcontracting PR with X as material to buy and X as component to send to vendor, but in the detail of component I have the storage location field kept empty.
This for me is a problem.
In fact when I create PO from this PR automatically through ME59 transaction, the System creates a requirement at plant level for component X.
But this requirement is for broken material and has to be covered by stock in storage location B.
I know that is not easy to understand all the details of this process, even due to my english, but I hope someone can help my.
Please if you need a clear up, ask me.
Thanks for your help
Yours faithfully
Paolo Verderio

Hi Paolo,
don't worry. Your explanation is well understandable.
I cannot advise how to fix the problem with the missing storage location. I just have some doubts that it is the right approach to distinguish between an boken and a repaired material by storage location. Even for stock valuation there is certainly a difference between both, that you can't make transparent by storage location, and also if you look at your available stocks.
I would recommend to have either different materials or different valuation types. I have to confess that I am not sure that valuation types would help for your subcontracting PO.
best regards,
Udo

Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          - Procurement type (maybe F)
          - Special procurement (Maybe U)
          - Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

Subcontracted material in storage location

Dear gurus,
I did a 101 movement in MIGO and the system did a 543 for the components to relieve the material from vendor but I can't see the material at our storage location.
With best regards and Happy Diwali to all my friends.
Syed

Hi Syed,
Subcontracting PO concept itself is this -
You will provide some components to vendor (using 541 mvt type before hand)
Vendor completes manufacture of the finished product for you. This FG you will enter as item to be procured from the vendor in the pO with item category L
The bom maintained in CS03 provides components list to be sent to vendor (you may find within the PO at the item -->Material Data tab...click the higherarchy icon on the right side within this tab.
Now, when you receive finished product from your subcon vendor, it posts with 101 for FG and components are consumed automatically with 543. Hope, it is clear now...
Regards

[Help] - Wrong storage location in production order!

Hello SAP Gurus and friends,
I have a finish product with a BOM with only one Raw material. This Raw material is created for storage location 1001 and 1010, but in MRP2 view, I have defined "Prod. stor. location" and "Storage loc. for EP" 1010. When I create a production order for my finished product, system puts 1001 in the storage location of the component!!!
Can someone please help me with this?
Thanks in advance,
Adelmo Silva

Dear Adelmo Silva,
Storage loc. for EP" 1010
This setting is for External procurement materials
you can find another storage location which is above of storage location for EP, here check for stoarge location mainatined
or check in BOM item details, whether any storage location is defined
Regards
Madhu

Issu storage location

Hi,
Where can we maintain (in material master) the Issue storage location? like we can maintain storage location for Extl procurement in MRP view.
Regards,
Sattuj

Hi,
issue storage loc is maintained in the Bom item of the component or via MRP Group or in material master prodn storage loc,.
Storage Location/Supply Area Determination
Use
You use the storage location/supply area determination function to define the strategy the system is to use in BOM explosion and in MRP to determine the issue storage location (production storage location or supply area) for the components.
Integration
The procedure described below is the same for both storage location determination and supply area determination.
Prerequisites
You must define the production storage location for the components in the BOM item of the assembly BOM. The system then reads this storage location in the BOM explosion and uses it as issue storage location.
If you have not defined a storage location (production storage location) in the BOM, you can set the strategy the system is to use in BOM explosion to determine the issue storage location (production storage location) from which the components are to be withdrawn. You set this strategy for the MRP group in Customizing for MRP or for Repetitive Manufacturing in the IMG activity Define Stor.Loc./Supply Area Determination in BOM Explosion.
Features
In the BOM explosion, the system tries to find a storage location in the BOM item (component). If no production storage location has been defined for the BOM item, the system reads the MRP group of the assembly or of the finished product to determine the strategy for storage location determination.
The following strategies are available for storage location determination:
If you select indicator 1 (only component), the system searches for the production storage location maintained for the material in the material master record. This storage location is then used as the issue storage location and is displayed in the component list.
You use this procedure for determining the issue location if you always withdraw one component from one specific storage location.
If you select indicator 2 (only assembly), the system checks to see whether the proposal issue location has been maintained in the production version of the produced assembly or of the finished product. If the proposal issue location has been maintained, this location is used as the issue storage location for all components and is displayed in the component list. If no proposal issue location has been maintained, the system uses the receiving storage location of the assembly as the issue storage location for the components. You can maintain the receiving storage location in the production version of the assembly in the field Issue storage location or in the material master record of the assembly in the field Prod. stor. location. If none of these entries have been maintained, the system can also use the to location in the backflushing transaction for Repetitive Manufacturing as the issue storage location for the components.
You should use this procedure for determining the issue storage location if all the components are stored together at a storage location close to the production line where they are needed.
If you select strategy "2" in repetitive manufacturing, the system checks the planned order for the production storage location. Then the system proceeds as described above.
If you select strategy "3", the system first proceeds as described for indicator 1. If it does not find a storage location using this strategy, it then proceeds as described for strategy "2".
If you select strategy "4", the system first proceeds as described for strategy "2". If it does not find an issue location using this strategy, it then proceeds as described for strategy "1".
When backflushing for the planned order, the strategy is ignored. The system withdraws the components from the storage location saved in the planned order.
Regards,
nandha

Profit centre at storage location level

Hi Experts,
Can we define a profit centre @ storage location level?
My scenario :
The document splitting of FI is activated for the document type of FI and also the profit centre is mandatory entry for any accounting document that will be created so when I am trying to post a MIGO I encounter the error
"Balancing field "Profit Center" in line item 001 not filled"
We have a option of maintaining a profit centre in plant data/storage location but i will be updated in the profit centre field of Costing1 view . But we does not want to upadate in costing view of material master data.
Basically We want the system to determine profit centre based on storage location in Goods reciept transaction .
Helpful Sugestions on this would be helpful & rewarded max .
points.
Regards,
Patil
t

Hi Raju ,
Thanx for the reply.I am Basavarajs Collougues.
Our Enterprise Structure of our Client is as follows
One company code is assigned to one plant and we have treated all the branches across India as Storage locations.Each Branch (Storage Location- MM) is configured as Profit centres in FICO.The goods are procured for a storage location.
By using the functionality of document splitting, the profit center field is made mandatory for all the accounting documents generated in the system. Now we are trying to post a goods receipt against a Purchase Order, the system is giving error "Balancing field "Profit Center" in line item 001 not filled"
The option is there to maintain a profit center at the plant level.But we have several storage locations under the plant and each storage location has to be linked with the particular profit center. So that, while doing goods receipt the system should determine profit centre based on the storage location in purchase orders.
Please suggest on this.
Regards,
SVU123

Can PIR created at wbs element and MRP area of storage location level

Hi,
I tried to create an planned independent requirement at MRP area and WBS element level, but failed. The MRP area is not plant level, but storage location level.
*When trying to create account assignment category Q for it, then there is an error message saying:*
**only stock requirements are allowed when planning at MRP area level.**
Does it mean it is not possible to create planned independent requirement for this case?
Thanks!

Select the "Issue storage location" as '2' here:
spro -> production -> material requirement planning -> mrp groups -> overall maintenance of mrp groups -> overview -> mrp control parameters at material level -> (field) Issue storage location selection
& make sure:
1. In the BOM issue storage location is blank for the components
2. For the FG products , in mrp area prod.storage loc is maintained
3. Components are extended to the mrp area.
Pl. revert with the results

MRP Run in an excluded Storage Location

Hello all. I have this situation.
I have material X with two storage locations: SL01 and SL02. Storage location SL01 has 15 pieces and SL02 has 5 pieces. In MD04, I can see a total of 20 pieces under the "Stock" MRP Element.
Material X also has five Order Reservations (OrdRes), for 5 pieces each. These Order Reservations are assigned to Storage Location SL02, because stock is procured from there.
What I want is to have the "Stock" line only show me the stock of SL01 (Stock = 15 pieces). I want SAP to "ignore" whatever it has in SL02 and only consider the stock in SL01, so MRP Run would give a proposal of 5 pieces.
I tried deactivating SL02 in Material Master MRP4 for material X, but then the MRP Run doesn't generate any proposals because my reservations are in SL02, and it's deactivated. Even if my Availability Check is set not to look at "storage location", if I the requirement is in SL02, it won't propose anything.
Is there any other solution to my problem? How can I have the system ignore the stock in SL02, but still propose those 5 pieces I'm missing in SL01?

I have material X with two storage locations: SL01 and SL02. Storage location SL01 has 15 pieces and SL02 has 5 pieces. In MD04, I can see a total of 20 pieces under the "Stock" MRP Element.
Material X also has five Order Reservations (OrdRes), for 5 pieces each. These Order Reservations are assigned to Storage Location SL02, because stock is procured from there.
What I want is to have the "Stock" line only show me the stock of SL01 (Stock = 15 pieces). I want SAP to "ignore" whatever it has in SL02 and only consider the stock in SL01, so MRP Run would give a proposal of 5 pieces.
Sorry, but your logic is not clear to me...
your stock:
5 pcs (SL02) + 15 (SL01) = 20 pcs
your requirements
5 x 5 pcs (SL02) = 25 pcs
Procurment proposal (w/o excluding SLoc):
20 pcs (stock) - 25 pcs (requirements) = -5 pcs > procurement proposal 5 pcs
You are saying:
What I want is to have the "Stock" line only show me the stock of SL01 (Stock = 15 pieces). I want SAP to "ignore" whatever it has in SL02 and only consider the stock in SL01, so MRP Run would give a proposal of 5 pieces.
So, you can see MRP will give a procurement proposal of 5 pcs without any SLoc exclusion...
Please clarify your requirement / business process. Why don't you want to consider the stock in Sloc2? What is your process?
You can see that you cannot exclude a SLoc with Sloc MRP and still consider the requirements relevant to that SLoc (unless you use reorder point planning in that SLoc).
Thanks,
Csaba

Procurement storage location in bom

Similar Messages

Maybe you are looking for