Product: &1 Location: &2 Error in Planning Book

Hello All,
We are facing an issue which is not reproducable and occurs randomly for different products.
When users access planning book, the following information message (not error message) appears as
"Product: &1 Location: &2" and the user is getting logged out without saving data.
We have implemented sap note 1510476 but still issue is found for few users.
Any pointers on this will be appreciated.
Regards
R. Senthil Mareeswaran.

Hi Senthil,
As for as I know, if this is a DP Planning Book, then, we need to explicitly execute the Macros (advisable for faster access though). For SNP Planning Book the macros run automatically.
If, your Planning Book is a DP PB, then, while executing the Transaction, it did not turn up to the exact Macro and proportionally, could not retrieve the Data Selection for Product & Location.
Please check whether the macros are running succesffuly.
Regards,
-Syed.

Similar Messages

Error in Planning Book

Hello Experts,
User is facing an weird error popup while entering in SDP94. User do not have access to load / change the data in PB. This issue is not replicable from our side.
Error : "Graphics control could not be created; check method call"
Please suggest the soultion to fix it.
Regards
Rahul Chitte

Hi Rahul,
Seems like authorisation issue. I suggest you can involve
basis or security team to fix the exact issue
1) Check the user settings using /SAPAPO/SDPUSET
2) Check assignment to planning book /SAPAPO/SDPPLBK
3) Check su53 dump of user and compare it with your dump
to find out the missing objects
Regards
R. Senthil Mareeswaran.

Error in updating ALV field catalog in selection tool for Planning Book

Hi ,
I am Implementing BADI '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
1). INIT_OBJECT_LIST
2). F4
3). LOC_PROD_VALUE_LIST
Please help on the same if u have any idea or clue.
Thanks.

Hi Srinivas!
Where did you get your implementation from?
It would be nice if you could debug your code!
For the F4 method, have you seen this note?
Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
Also check this note. It contains selection modifications in the BAdI:
Note 376902 - SDP selector: Basis corrections for BADI
I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
Thank you!
Will
SCM Support Consultant

Error -- While Uploading Data into Planning Book

Hi all...
working on SCM 4.1...
In Planning book...while loading the data of one SKU-Location into the PB , i am getting the below error...
"Overflow during propagation calculation: Number too large"
Message no. /SAPAPO/OM_TS078
Diagnosis
An overflow occurred while propagating a change to a key figure within the LCA routine.
In this case an internal error in the LCA routine is concerned.
*ProcedureCreate an OSS message as detailed in SAP Note 167280.*
can anybody help me to resolve the same as i couldnot ablt to view the data in planning book for one of the Product-location.
Regards,
Rajesh Patil

Hi Senthil,
For Some of the SKUs it is giving the Error , some abrupt values are stored in Live Cache for these SKUs(CVC), thats why it giving the Error.
The only solution is ..i have to delete the CVCs and create new one...
But i will loose the data as we cant take the Backup of Old CVC data --> Giving COM Error
The reason of Abrupt Values in Live Cache Could Be -->.>
Macro/Alerts
How can we fix these types of Error , as regularly i am getting these Error??
Is there any Note/Patch to overcome this issue?
Will be GR8 if i will get the solution..
Regards,
Rajesh Patil

How can you block production for a specific product in SNP planning book

Hi All,
Looking for a way to manually indicate a decision to prevent production in a specific cell for a product in the SNP planning book utilizing the supply planning and capacity leveling heuristics. For this requirement the resource would have available capacity during that time period. It also could plan other products in that time period. The requirement is for a planner to manually go into the planning book to somehow indicate that the heuristic should not consider that time period as available for a specific product, while still leaving the resource available for other products.
Has anyone run into this before? Any experience on how to stop a heurisitc from considering a specific time bucket for a specific product as available for orders?
Thanks
-Mike

Hello Mike,
I haven't tried it yet myself but I kow that there is the option in the Planning Book to manually fix several periods for a specific location product. This will prevent the heuristic from planning these periods for the specified product. For details please have a look in the Online Help for SNP under key word "Order Fixing".
regards
Christian

Error in reading data from planning book

Hi Guys,
I am facing error in reading data from SNP planning book .
When i try to read single product data for simulation version , it gets loaded correctly.
However, when i try loading data for more than one product, then i get error "Product does not exist".
I checked all products are assigned to model-version.
I tried running consistency check as well and after it finished got message as "All inconsistencies can not be corrected".
Please let me know if any one had faced this error.
Thanks.

Hi,
Consistency check should solve the problem in this case. Try running it specifically on the version you are using. It should work.
Regards,
Guru Charan.

Purchase requisition date in SNP planning book and product view not in sync

Hello Experts,
We have an issue with display of purchase requisition date in SNP planning book.
We are manually entering the PR's for a perticular week from Monday - Sunday(01.09.2014- 07.09.2014), when the last PR is entered on 07.09.2014, it does not appear on the same day in planning book(cell becomes empty) and moves to 06.09.2014, thus quantity on 06.09.2014 is the summation of the quantities present on 06th and 07th.
The PR dates are appearing correct when we click on display details in planning book and they are correct in product view, MD04 as well.
Additionally, this is the same date on which daylight saving time comes into effect.
Kindly advise if anyone has faced similar situation earlier.
Many thanks,
Aditi

Hi Aditi,
Check the time zone that you have in your location in ECC and APO.
Also note it is recommended that you maintain the same system time zone in APO and in ECC. (check tcode STZAC in both systems).
Different time zones should generate this kind of inconsistencies.
Kind Regards,
Mariano

Recursion in planning run: product T-B104 location PL1000 to be planned twice

Dear experts,
Please advice regarding the following situation. I execute the Production Planning Run. After this, I check the log and I get the following error : "Recursion in planning run: product T-B104 location PL1000 to be planned twice". Based on previous posts regarding similar situations, I run the trx. /SAPAPO/SNPLLC to identify the existing cycles resulting in the recursion of the planning run. After this, in the log I have the following error: "no supply sources were found for the model 000".
Does anybody have a clue regarding the cause of this ?
Thank you,

Hi,
This should be probably master data - please check if you have all the master data in APO. ( for eg PDS)

Error while loading the planning book

Hi There,
I am getitng the below error while loading the data in planning book
"Error for COM routine using application program (return code 40,016)
Error reading data - Planning book cannot be processed further"
Ran /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
Could you please advise?
Thanks,
Krishna

Hi Krishna,
Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
Regards
JB

Manual Creation of Production(confirmed) in Planning book

Hi Experts,
I just want to ask if in case I manually enter a production order quantity for a certain material location in Production(Confirmed) key figure, would it automatically populate dependent demand quantity on components?
I understand that if production order comes from SAP R/3 and CIF to APO, I will have both production order and dependent demand in palnnign book. But in case production order is loaded from an external file or manually entered, would it also gives me dependent demand? Thanks.
Regards,
Mylene

Hi Mylene,
I agree with Virender (who seems right quite often actually )
I think you are approaching this the wrong way: you cannot create a SNP production confirm; and will never be able to...
However, you can create a produciton confirm order via interface; and , providing you do that properly, your order will be visible in SNP, both in produciton confirm and dependant demand.
I hope it make sense.
Where you need to concentrate your effort is on this interface.
You will probalby need interface to create PDS / PPM and to create comfirm order.
I am not an expert here, but I guess the best is to use bapi (e.g "PrdDataStructureAPS" (BUS10014) or "ProdProcessModelAPS" (BUS10003 / "ManufactOrderAPS" (BUS10503)
Thnaks and Regards
Julien

Transport planning book from Production to Dev/ Test system

Hi APO Gurus,
I need clarity for below mentioned point u2013
I have a correct planning book in production system. I have a different structure in testing as well as in quality system. I want to transport planning book with all data views and macrou2019s associated with it to development system (or in test system).
How to do this? Please elaborate with details
Thanks in advance.

I did the transport from Production to Dev client using TSOBJ last week. Basis team helped in connecting Prod and Dev clients.
Everyting went ok except selection IDs. When I check 'with selection transport' in TSOBJ, it ends up in short dump saying Timed Out in reading SQL table /sapapo/sdpsetde. We increased the system profile parameter "rdisp/max_wprun_time" from 1800 seconds to 3600 seconds. It still timed out with same message. So, I created the transport without selection IDs and it worked.
Next, I downloaded the only required selection IDs (total 498) from the DP Planning Area in Production client to excel spreadsheet using table /sapapo/TS_SELKO. Then created another transport using TSOBJ.....this time I used the 'Transport of Selections' section for Selection IDs and used single value selection from drop down, uploaded the IDs from clipboard option. That worked.
Although my problem is solved....but by any chance, has anyone encountered that TSOBJ Timed out? Is there any OSS note for this?
-Sachin

Error creating planning locations from eas console

Hi,
I am getting the following error when trying to create new location that point to planning apps from EAS. I was able to see the servers listed under planning. But when clicking on that it displays the following error.
"Error connecting to planning server" I looked in the EAS logs and saw the error
" error connecting planning server 11333"
I tested telnet connection from EAS server to planning server and it worked fine.
I checked the HBRServer properties file location on planning server and looks good.
Is there anything else I need to look.
Thanks
Srinivas

Hi John,
Thanks for the reply. I forgot to mention.
I followed the steps in the document.
Logged into every app from planning web.
Logged into EAS -> right click Administartion and refresh users.
Then tried. But getting the same error.
I also checked the planning logs and it clearly mentions "Planning connected to HBR repository successfully".
Thanks
Srini

"Initial column cannot be generated" error when creating a planning book

Hi,
I have an error when creating a planning book with the planning book wizard. In the tab "data view", I enter values for the "Visible" and "Input" fields and validate. The following error is generated: "Initial column cannot be generated" and then "Maintain the time for the 'column visible from' field". I tried with different dates, and get the same error.
I am running SCM 5.0.
Any help would be greatly apreciated.
Regards,
Mikael.

Hi,
Generally these error come when we manually enter the value in the Visible and Input column. Instead we should try select value from the Drill down options which gets generated based on the Time Bucket Profile you have selected as input for Planning Horizon.

Interactive planning book transaction error

hello
It is observed many times that even though user is assigned to any particular planning book
user sometimes get an error,,,when hit /n/SAPAPO/SDP94..screen directs to change planning book screen
looks like it is some type of inconsistency did any one come across this type of issue if yes any solution to solve the same?
response appreciated
Rgds
SB

hi SB
The authorization object associated with display and change access in the planning book is governed by C_APO_PB. can you please check with this object is correctly defined in the roles assigned to the users. you may want check with your BASIS folks if the correct restrictions has been provided in the roles.
Let me know if this helps.
Rgds, Sandeep

Error while accessing DP Planning Book through Portal. ( internet)

Dear SDN,
We are using a collaborative planning book from SCM 4.0 system, which is published as a service on the ITS (6.20 version). This ITS has been published so that we can access the system from the Broadband, simply like any other website.
The ITS URL is :
http://mmscmoptprd.mahindradms.com/scripts/wgate/webgui/!
The planning book service is
http://mmscmoptprd.mahindradms.com/scripts/wgate/clpsdp/!
When we try through our LAN, we can access it.
When entering through broadband, we can see the first page of planning book , i.e. where selection of planning book and planning view is to be made.
Once a selection is made from the dropdown, and when "CHOOSE" button is clicked (for that matter the rectangular box containing the selection criteria and also the Exit button ) we get a message as :
Problems with this Web page might prevent it from being displayed properly or functioning properly.
Line : 714
Char : 1
Error : Object Expected
Code : 0
URL : http://mmscmoptprd.mahindradms.com/scripts/wgate/clpsdp/!?client=100&language=en&accessibility=0&DesignBaseUrl=%3A%2f%2fmdwds01.mahindradms.com%3A80%2firj%2fportalapps%2Fcom.sap.portal.design.portaldesigndata%2Fthemes%2Fits&~design=mm_dms_defaultTheme
and it remains on the same page.
The IView used is of the type :
1. URL IView ... CLPSDP service url is given as parameter URL.
2. IAC IView : web-service is "clpsdp" and "ITS url" is given.
We intend to give either one which should work fine.
I am not able to figure out as due to what reason should this problem arise, either the UI attributes or the publishing or something else.
Request you to please help.
Regards,
chandani
ep consultant
www.bcone.com

Hello,
SInce this is an Portal Error, for quick and efficient replies past it in SAP EP forum.
Thank and regards,
Abhishek

Product: &1 Location: &2 Error in Planning Book

Similar Messages

Maybe you are looking for