Project Revenue as in Project Currency

Hi ,
Can we generate the revenue in the project Currency irrespective of Project Functional Currency ?
In Project Billing Manual -- It has been mentioned that If you select Project Functional Currency and Invoice Transaction currency as Revenue Transaction currency On your Multi Currency Project , The GDR Process calculates Revenue in the Invoice Transaction Currency ..
I tried to Check the Box in the Currency Tab Invoice By Billing Transaction currency and tried to select Revenue Transaction Currency as Project Functional and Functional and Invoice Transaction Currency but as soon as i Checked the Box , it get freezed and not letting me to select the Revenue Transaction Currency as Project Functional and Invoice Transaction Currency .
Can any one help me on this issue ...if it possible to generate the revenue in Project Currency and how to set up the same .
Thanks /Regards ,
Manoj

Hi Manoj,
On the Project > Options > Currency > Billing Tab
Please Enable Multi Currency Billing, then select Revenue Transaction Currency and select according to your need.
Invoice By Billing Transaction currency :
When the Invoice by Billing Transaction Currency is enabled for the project, you can generate separate invoices for a project by each billing transaction currency, even
though one or more invoices may be funded by the same agreement. Therefore, expenditures that are billed using markups or burden schedules to derive the bill
amounts are grouped according to their expenditure transaction currencies.
Revenue Transaction Currency options for your project :
Oracle Project Billing selects the Project Functional Currency Only option for revenue transaction currency. This ensures that the Generate Draft Revenue concurrent program generates revenue in project functional currency. To enable the Generate Draft Revenue concurrent program to additionally derive revenue in invoice transaction currency.
Project Functional Currency and Invoice Transaction Currency option :
When you select Project Functional Currency and Invoice Transaction Currency as your revenue transaction currency, the Generate Revenue Accounting Events process calculates Unbilled receivables and Unearned revenue amounts in invoice transaction currency.
Regards
Raghavender K

Similar Messages

SCHEDULES: NON PROJECT REVENUE REPORT

HI GURUS,
can you please tell me where to find out the standard reports and Datasources used and Tables related to <b>NON PROJECT REVENUE</b>.
points will be given.
Thanks
regards

Hello
what is the source of non revenue. Is it booked to a GL account ?
Non billable recievables is a special GL account.
Check OUVR for setting.
Even deferred revenue is a special GL account.
Once you know where the amounts are booked. Execute a normal standard report from GL info systems.
Reg

Migration of costs & revenues of open projects

Dear All,
I am new to CO & migrating the costs & revenues of open projects from old SAP system to new SAP system.
For costs & revenues of open WBSs/Network activities, we have three programs:
1. primary costs extraction & upload
2. secondary costs extraction & upload
3. revenue data extraction & upload
For primary costs, i am referring to table COSP and secondary costs COSS.
Incase of secondary costs, i am not sure what all the values i should consider
In COSS - i have cost center allocations - which need to be migrated through KB21N, with total qty & UOM
and also i have network activities settlements...do i need to consider this as well to get the value matching with WBS value in CJI3.
If yes, how do i migrate the network settlements? definetly not through KB21N.
Kindly clarify as i am not able proceed further on this.
Thanks in advance
Gangadhar

When you say migrating from old SAP system to new SAP system, do you mean, you are in a upgrade project? If it is an upgrade project, you need worry to transfer data. The technical upgrade would address the need of data migration.
If it is entirely a new different system and you are planning total re-engineering, you may only want to post primary costs and redo the allocations and settlments.

Settlement of project revenue

Dear PS Experts,
If the user choose to settle the project revenue to a GL account, the GL should be a balance sheet acount and not a primary gl account or cost element (since the cost elem. will require a cost object during posting and this will cause an error when execute CJ88).
The questions is whether settlement of revenue to a B/S account is recommended in SAP best practise?
Please help and thanks for the advise
Yuzeila

Hi,
    If it is posting to the first line means....
Follow the steps below:
First try to create a project and post the actuals and revenues.
Go to cost element report pick up those cost elements both for costs and revenues.
Go to Soruce Structure in the config, define the structure with name for Ex: 'Z1' and define two assignments, one is Costs and other Revenue, by selecting the costs go to Source mention the cost element where the actual costs are posted on (Mention only that cost element no other cost elements), next select the Revenue assignment and click on Source and mention the only cost element where the revenue wsa posted (Mention only that revenue cost element no other cost elements) and save the transaction.
Come back to project builder, select the wbs and click on settlement rule, in the menu goto-->settlement parameters and check whether the source and settlement profiles are correct or not, incase source structure is not available mention the same.
come back to settlement Rule overview and fill the fields as mentioned below:
1st line:   Category: GL
              GL Account: GL Account Number
              Source Structure: COSTS
2nd Line: Category: GL
              GL Account: GL Account Number (Revenue Account)
              Source Structure: REVENUE.
Now Run the Settlement for the specific period costs posted, the costs will be posted seperately to the two different GL Accounts.
I think this will resolve your problem.
Rgds
Sudhir Reddy

Cost / work project revenue distribution

Hi
I am looking at cost / work project revenue distribution results and I see that GDR created 2 lines in the revenue: one for expenditure and one for the event. I know that event was created from billing extension. The expenditure line has 0 distribution. The accrued_revenue and accrual_rate columns are set to 0. I cannot find where and how this 0 lines gets created. Is this seeded logic for cost / work type projects? Your help on this greatly appreciated.
thank you in advance
Ed
Edited by: user_Ed_123 on Mar 11, 2012 2:48 PM

Hi
any help is appreciated.
thanks!

Project Revenue Plan Not Update from Sales Order Item

I am generating a network and project from the sales order item using Assembly processing. I am using milestone billing on the sales order item and the milestones attached to the project network activities are appearing as billing blocks on the sales order item billing plan. However, the project revenue is not getting updated from the sales order billing plan. Can someone please help?
I have deleted the billing plan on the billing WBS element and activated revenue planning update from sales order in cusomization for PS. I am looking at CNS41 under the project revenue sched in version 0. Is there a different report I should be looking at?
Regards,
Venkat.

HI Venkat,
You are looking at the correct report & I believe you have also done the necessary customization. If you create a sales order and reference it to a quotation, the related plan values in the WBS element are refreshed automatically.
When the payment data is recorded, the terms of payment and the customer payment history are taken into consideration. One of the probable causes could be the credit limit of the customer might have been exceeded. Take help of your SD consultant & increase the credit limit for that customer (from the sales document), t-code FD32 if it is permitted in the business.
After the new credit limit is set execute the following steps:
u2022     Go to the t-code Change billing request (VA02)
u2022     Open the required billing request
u2022     Remove the account assignment of WBS element from each line item
u2022     Save the billing request
u2022     Reopen the billing request in change mode
u2022     Reassign the WBS elements to all line items
u2022     Now the changed credit limit will take affect
u2022     Check the Planned Revenue for the said project in CNS41, it should get updated.
Rgds
Deepak

Evaluation - Cost/Revenue Costing for Project

Hello,
executing the evaluation "Cost/Revenue Costing for Project" I get no results. Could someone tell me where the values for this report come from? Can I find somewhere a list with all the evaluations (except the one like completed checkpoint items, ... which are really self explaining) and the source of the shown values?
Thx, Max

Hi,
I hope that you have assigned Cost revenue rate to Roles.
Check in spro> cProjects> Evaluation--> Define extract layout, Iterator for the specific layout RES_PART, Object and attributes.
Also check in Define evaluation assigned extract layout to Evaluation is correct which is defined in earlier step.
Regards,
Karan Hon
Award if useful..

NON PROJECT REVENUE

HI GURUS,
can you please tell me where to find out the standard reports and Datasources used and Tables related to<b> NON PROJECT REVENUE.</b>
points will be given.
Thanks
regards

Hello
what is the source of non revenue. Is it booked to a GL account ?
Non billable recievables is a special GL account.
Check OUVR for setting.
Even deferred revenue is a special GL account.
Once you know where the amounts are booked. Execute a normal standard report from GL info systems.
Reg

Creation of a Quotation with a WBS of a Project that has no project stock

Is it possible to create a quotation or a sales order that is assigned to a project that has 'no project stock' (PROJ-BESTA) in the project profile? We are using a non valuated material in the quotation but get the error message CN769 'Material valuation is different'. Project stock is not required, we do need the revenues and the billing plans from SD.

Hi,
Check your requirement class derived for the material.
In the "Account Assignment" sub tab of requirement class maintenance, see the Valuation field value (for special stock) maintained.
It should probably be "blank" or "A" for your scenario.
regards

Is there a way of working collaboratively on a flex project with a small project group?

Is there a way of working collaboratively on a flex project with a small project group?
I am part of a small group of developers who wish to work on a single flex project together. Is there a way to set up flex so that the project can be developed by multiple people at the same time. I have seen one thread out on the internet about working locally and then uploading to SVn but this is not an option in this case.
Any ideas.
Many thanks in advance
Dave

I would say that rushing into development without a source-control system will cost you more in the long-run. If your organisation is serious about developing software it then it needs to invest in the necesary infrastructure, so you should get that process kicked-off as soon as possible.
In the interim you could set-up a source control server on one developer's machine or commandeer a spare machine to use as a temporary source control server. Just make sure you have it backed-up regularly. Or you could use one of the online source control services; many will support private repositories for a small fee.

A totally different project is played when project is played in full screen view and project is not editable

Hi
I have problems with my imovie 09. After several days of work with an imovie project I was again about to start editing my project after startup of my mac. I played through the project and everything seemed fine, but when a movie clip was moved infront of a still picture instead of after, the whole project became uneditable and unplayable. When trying to play the project in full screen mode a totally different project is played. Shutting Imovie and/or the mac down does not help. In some cases I have managed to get the red cursor moving along in my project. However, no movie is played in the screen in the right hand corner, -it is totally black, and the audio is again from a totally different project. I am not able to export the project as all the export options are grey. Some of the other projects worked fine and some did not, -and the functionality seemed a bit random from time to time after rebooting/ exiting and reentering imovie. My first guess would be that this is a memory porblem. However, looking at my activity monitor it seems that I'm only using 1.73 GB of system memory of a total of 4....I have tried remove old projects and also quite a bit of clips in my library to minimize memory use. Now it seems that all the rest of the projects are working fine, but my current project is still corrupt. I have tried copying the first clip of my project into a blank project, but it will only play in full screen mode, not in the screen in the right hand corner.
I am working on a mac mini with 2.26 Ghz intel Core 2 Duo, 4GB 1067 MHz DDR3.
I would be very grateful if anyone out there could help me out...Is my project totally corrupt beyond the point of no repair? Why has this happened, and how is it possible that something like this can happen without any kind of warning?
Thanks!

Thanks for your reply AppleMan1958. Unforunately the playback problem was only experienced in the project described, - all other projects played fine....and I tried a lot of different ways to do it...so I really believe the whole project, including the playback (which did not work in the editing window in the right hand corner either, -nothing was shown there and the red marker line would not move across the project) just suddenly become totally corrupt...However, after deleting the project as described above and installing imovie11 I have done the whole thing over again and completed the project without problems this time.
But thanks for the tip anyway!

Manual creation of Project Site for a project is taking old project site template.

Dear All,
I have modified the project site and save it as a template to associate it with an EPT so that the modification will reflect in new project sites.
For existing projects, I am deleting the old project sites (after taking backup) and recreating so that new modifications will be there for existing projects and I am able to do so.
But, for 1 of the project, when I have deleted the project site and recreated, still it is taking the old template (i.e. new modifications has not been seen).
Kindly advice in some areas so that I can jump in and around and can find out a solution so that the project site will take modified project template.
Example to get the issue in an easy way:
ProjectA:
Project Site: http://epm/pwa/ProjectA
Issue List:
Column: Category [data type as Choice: Cat1, Cat2, Cat3]
Have saved 1 project site as a template and associated with an EPT with the following changes:
Column: Category [data type as Choice: Choice1, Choice2, Choice3]
Then, deleted the project site: http://epm/pwa/ProjectA and recreated.
So, it should take the modifications in the project site.
But, it is showing as Column: Category [data type as Choice: Cat1, Cat2, Cat3].
Regards,
Shravan

Dear Guillaume,
Thanks for your response.
Please seem my comments inline:
Which Project Server version do you use?
PS 2010
It is working well and as expected for all projects except for 1 specific project?
Yes. It is working well for other projects except 1 project.
Has this project something particular?
Nope. It is similar as other projects.
How do you proceed to create the new project site? Do you go to the site actions, then new site and pick up your new template?
First I have modified 1 of the project site and saved that site as a template.
Then, I have deleted the existing project site (from Project Sites under Operational Policies) and recreated so that project site will gets created from the new template. But, it's not happening.
Regards,
Shravan

On iprocurement page..How to populate task field dependent on Project lov field value which Project type is "Capital Project Type"

Hi,
I have an requirement on Iprocurement page where in i have to populate task field as CAPL in case my project field contains the project which is of type 'Capital Project Type'.
Please suggest how can we implement this.
Thanks,
Abhishek

try these links:
http://sharepoint.stackexchange.com/questions/103682/autopopulate-form-fields-based-on-selection-in-people-picker-column-using-javasc
http://sharepoint.stackexchange.com/questions/80261/people-picker-not-getting-populated-in-the-sharepoint-site
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?
A little background info. I use Captivate 7 and currently have over 100 projects that I maintain on a quarterly basis. I publish using the SWF format and upload the swf/htm files to a server where they are then accessed from a few locations (within our online documentation, in our software product, on two different websites). Many of the projects are linked so some will be viewed as a series and others viewed as a standalone video. Each video uses the same template and includes an intro and end slide. Now my organization wants to implement a new intro to all videos (those I publish and those from several groups across the organization). My current intros provide overview material for the specific video so the new intro, which is an animation with audio in mp4 format, would need to be placed at the start of each project. The issue is, the intro adds 9 seconds to every video and in many cases doesn’t add any value (say, if a user accesses the video from within our product or views the videos as a series). I’ve talked it over with my boss and we want to try to add the intro only to videos accessed from site X, not any other location. So now to my question. Is there a way to play an external mp4 file (intro) only when the published project is accessed from a specific site, therefore eliminating the need to update each project? Maybe there's a way to add a parameter or variable to the URL or the html code?
Thanks in advance for your suggestions. Please let me know if you need additional information.

AimeeLove,
I have a solution for you. You may have to modify the code a little bit based on how long the timeline animation is for your clock. I based mine on 3 seconds to complete a minute hand sweep around the clock.
Milliseconds for each point on the clock:
12 = 0
1 = 250
2 = 500
3 = 750
4 = 1000
5 = 1250
6 = 1500
7 = 1750
8 = 2000
9 = 2250
10 = 2500
11 = 2750
In the mouseover section for 12 o' clock, put this code...
myVar = setInterval(function(){
     var pos = sym.getPosition();
     if (pos > 0 && pos < 50){
          sym.stop(0);
          clearInterval(myVar);
},10);
When you point to the time, the setInterval method loops every 100th of a second and checks the current position of the timeline. When the timeline reaches the range between 0 and 50 milliseconds (almost impossible to hit 1 specific point), the timeline will stop at 0. Also, the clearInterval will be fired to stop the loop.
In the mouseout section, put this...
sym.play();
clearInterval(myVar);
It start the clock again, and it also clears the loop in case you mouseout before you reach the range.
Make sure that myVar is a global variable so you can clear it from the mouseout section.
Repeat this for each point on the clock. To avoid potential conflicts, you may want to use my12, my1, my2, etc. instead of myVar. I put the milliseconds at the top that you would use as the beginning of the range. 50 milliseconds should be enough to catch it. So, for 5 o' clock, you would make your range between 1250 and 1300.
Let me know if you have any questions. Thanks!
Fred

How to create the Custom project System as Web Project

Hi,
I have created a custom project system using this walkthrough. But
this walk through is targeting Visual C# project system. I need to create the Custom project system as Web project and set the start up page as index.html file. How can I achieve this?
Note:
I have got the Custom project system sample from VS2013 SDK samples(https://mpfproj12.codeplex.com/).
But it demonstrate the Custom console applications only.
- Abbas K

Hi,
So you didn't even follow this walkthrough yet? If you did, how did you do it?
I failed to create such a web project system because I finally messed up my VS experimental instance. But it's possible to create a custom web project system, by following this walkthrough. Someone else has successfully made it, check this
link.
The difference is that you have to use web project type instead of the console application project type. You could copy a web project's .csproj file into the VSPackage project and rename it to xxx.myproj. There's an error in the walkthrough that the AssemblyInfo.cs
file should be put into Properties folder and set the "Build Action" property to Content, "Include in VSIX" to true.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Project Revenue as in Project Currency

Similar Messages

Maybe you are looking for