Project Server 2013 - Workflow Execution " Submit button is grayed out. "
Dear All,
As i was in progress to making workflows in sharepoint designer this is my first project of implementing project server 2013 and executing the workflows,in the continuation of this i followed below mentioned link to go through the process of WORKFLOWS but
got some issue
LINK: http://msdn.microsoft.com/en-us/library/office/jj163494(v=office.15)
ISSUE: Is that the SUBMIT Button is grayed out after saving initial proposal plan. Snapshot is attached.
I have checked in/out process along with this gone through re-executed the whole process same result occurred.
Suggestion/Help needed...
REGARDS DANISH DANIE
Hi Danish,
Its a common thing which users are experiencing.
When you create project from workflow click on Submit it take time for transition before transition it check all the condition which you have set for workflow stage. As per your screenshot it is waiting for details in PDP (Provide details of the proposed project)
when you click on submit it push data into the database,sometimes it send e mails to stakeholder then it use exchange and take times to send e-mails and for transition too.
When you/user face this issue ask them to wait for some time or close the file then reopen.
In the screen workflow is waiting for Project detail information in PDP that is why it is still in process and not going to next stage.
kirtesh
Similar Messages
-
Help needed Regarding Project Server - 2013 Workflow
Hi All,
I am new to Project server 2013 Workflow, hence please help me regarding this. Pardon me if this question is too trivial.
I have created a project type associated with a workflow and my workflow is as follows :
So I am not doing anything here, I am just testing the workflow as mentioned by technet site : http://technet.microsoft.com/en-us/library/dn458865(v=office.15).aspx
But it is mentioned that, after a minute or 2, the workflow state will change, also they have mentioned to press the Submit button.
But in my case, the workflow is not moving to next stage [It just says 'The workflow is still processing - which never changes after hours] or I am getting the submit button (Submit button is disabled on the ribbon). Below is the state of my workflow :
PS : I have made the user added to Portfolio managers group as well. But still I am having this same issue.
The Workflow manager is installed properly, and it is working fine in case of List workflow. I am facing the issue only wrt Site workflow for Project server 2013.
Please help me to solve this issue.
Thanks,
shankyHi Kiran,
I am now facing issue while assigning a task to a person in the workflow.
I am having a person named say 'John' , who is included in Project Manager as well as Portfolio Manager.
And I am using a workflow as :
Stage : Conceptual
Assign a task to John (Task outcome to Variable: Outcome5 | Task ID to Variable: TaskID3 )
Transition to stage
Go to Approval
But this is again giving issue as :
Workflow Internal status : Cancelled
Details: System.ApplicationException: HTTP 401 {"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have
permission to perform this action or access this resource."}}}
PS : I have used the same Sharepoint admin account for 'Account Name' in ‘User Profile Sync' , Is this causing the issue? Please let me know.
Thanks,
Shanky -
Hi,
Workflow status web part gives error when going back to previous stage (using GO TO) transition activity in Project Server 2013 workflow.
Please guide how to create a workflow which restarts from a desired stage.Thanks for your prompt reply....
It gives following error
Workflow Status
This Web Part was unable to load.
Information that may be useful in solving this problem was written to the Unified Logging Service (ULS) log on the Project Web App with the following ID: e95a9c9c-1f68-90d7-0a3e-5951df70fec6
For more information, contact your Project Web App administrator.
what do you mean to restart the Project Server 2013 with different project name, please elaborate.... -
I've set up an event and published it, but it won't allow for registrations. The SUBMIT button is grayed out. Thoughts?
The submit button is greyed out in case the registration page is being viewed in preview mode.
Please check if the following string is present in the event registration URL:
"preview=true"
If it is present, please try by removing this string.
Thanks,
-Nitin -
Send email is not working in share point desinger 2013 for project server 2013 workflow
Hi,
How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
Thank you for helping us.
Thank You
VinayHi,
How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
Thank you for helping us.
Thank You
Vinay -
Project Server 2013 Workflow Task Permissions Breaking Inheritance and Causing Workflow to Cancel
I have an on-premise instance of Project Server 2013 with a workflow that includes an
Assigned Task to assign users to Approve or Reject a WF phase. The workflow successfully assigns the task and notifies the user of the task. However, after (or possibly just prior) the user Approves the task, the workflow is automatically
cancelled.
By default, the WF Task List is set to inherit permissions. After Approving an item, it appears that the list permissions automatically breaks inheritance, causing the workflow to cancel. This occurs somewhat regularly after resetting permissions to inherit
from the parent site. Although there are stretches where the issue doesn't occur. I'm not sure what's causing the list permissions to change.
This issue occurs in both our Dev and Prod environments. Has anyone experienced this issue with permissions breaking inheritance automatically?Hi Vic,
According to your description, my understanding is that the workflow was cancled when you created a workflow with Impersonation Step to break inheritance permissions.
After breaking inheritance permissions, make sure the workflow initiator (the creator) still has least edit permission on the list.
In addition, please check the workflow history list to find more information about this issue.
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Submit button grayed out in Project server 2013 WorkFlow
We published the Workflow in project server'13 through SharePoint desginer 2013 and we used the Microsoft sample workflow. after saving the project information Submit button is in disable mode. So can any body clarify this issue ?
we tried the re provisioned the PWA through the above article but still submit button is in grayed out mode.
Please clarify me where i am wrong?
Thanks in advance.Hi,
Open your site in SharePoint Designer
Expand the "Workflows" folder, and the folder containing the workflow you want to fix
Right-click on the file that ends in "xoml.wfconfig.xml"
Choose Open With -> SharePoint Designer (Open as XML)”
Look for the “RulesVersion” attribute
Change its value to “V1.0”
Save the xml file
If you modify the workflow again, you’ll have to change the “RulesVersion” attribute again before saving as an STP as changing the workflow increments this
attribute value which has to be reset to "V1.0".
Source: http://suguk.org/forums/thread/3942.aspx
Hope this will help you.
Jalal Blali MCTS, MCITP -
How to send previous stage of a project in project server 2013 workflow
Hi
I have taken three stages. First stage i have submitted fields it goes to second stage. Now on basis of condition if it fails the condition it should go to stage1.
Can it be possible. If it possible pleas guide me. I am using Project server designer 2013.
Thank You
VinayVinay,
What you are looking for is a State-Machine Workflow. In SharePoint 2013 Designer, the "Stages" model will allow you to do this. See my example below. However, if you workflow logic is overly complex, Visual Studio might be a better tool to build the
workflow.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:
-
The Stage Gate Workflow get suspended in project server 2013
Hi,
Getting following error when i am trying to create an stage gate project/workflow in project server 2013. The submit button in
the ribbon gets disabled and when i see the workflow status it is suspended. and getting following error message.
RequestorId: d5f04432-bd27-3da1-0000-000000000000. Details: RequestorId: d5f04432-bd27-3da1-0000-000000000000. Details: An unhandled
exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401 {"x-ms-diagnostics":["3001000;reason=\"There has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["d5f04432-bd27-3da1-bc57-8ce72d9f5e43"],"request-id":["d5f04432-bd27-3da1-bc57-8ce72d9f5e43"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["153"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["Bearer
realm=\"2a5d48f2-f71d-4589-a6ae-ab6c0d30fafd\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]0d30fafd\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4481"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Thu, 04 Jul 2013 11:20:43 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Could anyone help me to fix this issue and reason why the Stage gate workflow isgetting suspended.
Thanks,
SunithaCheck your User Profiles and make sure that the user's domain is correct. We've seen workflows suspend with 401 errors when the User Profile Service syncs with AD and pulls the wrong domain name - for
example if your FQDN is corp.company.com and the user logs in with company\username, UPS might have corp\username instead. Hence a 401 error...
Here is a link that includes the steps to fix this:
http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
Neall -
Configure Workflow Manager 1.0 in Project Server 2013 with FBA
Hi,
Please suggest the ways to configure Workflow manger in Project server 2013 where PWA using FBA
we have tried for below situation, but no luck!!
The workflow manager configured using windows login account, we are associating a FBA site with workflow manager which is
Register-SPWorkflowService -SPSite 'http://FBAsite' -WorkflowHostUri 'http://workflowmanagerapplication:12291'
Following steps are taken care while creating workflow.
We have added users to the user service profile services
User profile synchronization is started
The user by whom we are logged is available in User Profile list
we are not running workflow with share point system account
Final step full synchronization of User Profile Application
Below the error we are getting when workflow run
Resume this workflow
RequestorId: 879e36f9-9db0-3c16-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["440"],"SPRequestGuid":["879e36f9-9db0-3c16-a91c-356d29becb34"],"request-id":["879e36f9-9db0-3c16-a91c-356d29becb34"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4605"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Sun, 15 Jun 2014 12:44:03 GMT"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)Hi Mafeer,
Since this issue is related to Project Server, I would like to recommend you to post there for more effective support:
Project Server General Questions and Answers
Thanks for your understanding. -
Workflow in Project server 2013 online not going particular stage after Approval
Hi All,
i have created workflow using sharepoint designer 2013 for project server 2013 online. and i have also set the approver after the first stage. when i create a project using this workflow, project is created successfully and the approval task also go for
a approval to specific user. and i have set the property that after approval it has to go on specific stage. but the problem is when user approve the task it shows approved but my stage in workflow is remain same. it is not going to any stage.
i don't know why this type of problem is occur.
FYI, i have created same workflow for Project server 2013 on premise(Which is installed in my server) and
it is working fine but when i want to deploy this workflow in
project server 2013 online its giving error.
so please help me to solve this type of issue.
ThanksI am also experiencing issues with this. After the approval task is completed, the Workflow gets cancelled with the following message
RequestorId: 60d96368-4cb4-b059-8086-604972a92e60. Details: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
bookmarkManager, Location resultLocation)
All other desired workflow actions work as expected. Emails are sent, project is moved from stage to stage, however as soon as the workflow approval task is completed, either Approved or Rejected, the Internal Status is changed to Canceled and the
workflow fails.
What is interesting is when the Approval task is completed, the approver will receive an email notification that the task was CANCELLED or DELETED....
not COMPLETED, which is what would be expected.
Has anyone seen this - any potential resolution? -
How to handle PSW approval task in project server 2013 through declarative workflow VS 2013
Hello,
Plz explain in detail handling PSW approval task in project server 2013 through declarative workflow VS 2013
bcoz when using am posted on with this error when i try to approve the item
"This list item has not been created by the workflow.you cannot apply this content type"
any help would be appreciated!!!!
Thanks regards, Vignesh.I am also experiencing issues with this. After the approval task is completed, the Workflow gets cancelled with the following message
RequestorId: 60d96368-4cb4-b059-8086-604972a92e60. Details: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
bookmarkManager, Location resultLocation)
All other desired workflow actions work as expected. Emails are sent, project is moved from stage to stage, however as soon as the workflow approval task is completed, either Approved or Rejected, the Internal Status is changed to Canceled and the
workflow fails.
What is interesting is when the Approval task is completed, the approver will receive an email notification that the task was CANCELLED or DELETED....
not COMPLETED, which is what would be expected.
Has anyone seen this - any potential resolution? -
Upload button in PDP page in Project Server 2013
Hi,
I am using SP 2013 and Project Server 2013. I want to create a project detail page with a upload button to save document to project's site(generated from site template).
In 2010,in solution starter kit ,there was a list viewer control to achieve this.But how to do this in Project server 2013
Please let me know way ahead to achieve this?
Thanks,
Sachin
Sachin Sisodiya Associate,Dev Services ASPL,UdaipurHi sachin,
It seems to be Project Server issue, I will move it to Project Server forum.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Hi All,
We planed to have as simple workflow for project, which will go through initiation, planning , execution and monitoring and closure. Is there any easy way to configure this or we need to develop the workflow using visual studio.
Thanks in advance, tajHi Taj,
With PS2013, it is now possible to build workflow using SharePoint Designer that requires less/no code than with Visual Studio with PS2010.
See some interesting links below to start over:
http://blogs.office.com/2012/09/18/demand-management-now-with-sharepoint-designer/
http://msdn.microsoft.com/en-us/library/office/ee767694(v=office.15).aspx
http://msprojectnow.com/Blog/tabid/142/entryid/617/Designing-and-Deploying-workflows-with-Project-Server-2013.aspx
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
How to get timesheet information in a javascript (Project Server 2013)
Hi all,
In Project Server 2013, I'm trying to customize the Timesheet ribbon. This far, I've been able to add a new button and tie an event to it. All is working well. This is all done using elements.xml and a javascripts.
Now the problem is that I want to get some informations about the timesheet (the Guid for example) and, for now, I've got no success. I know that there is an object called PS.TimeSheet, but when I try to use some PS.TimeSheet's methods I get an error.
Note that i'm in the page http://servername/pwa/timesheet.aspx (there is not Guid in the address) and all the treatments should be done in the javascript (no call to another aspx page)
Thanks !Finally, I've found the solution.
My goal was to add a button in the timesheet ribbon to launch a special report showing some data about the timesheet. The report has the timesheet Guid as parameter.
To customize the Sharepoint ribbon, you have to do it via an xml file and a javascript (a lot of explanation is available in the internet that explains how to do it). So I had to call a function in the javascript to launch the report (which is a SSRS report).
When you are in a javascript you have access to many global variables. When the timesheet.aspx is displayed, there is a global variable called "timesheetComponent".
Using this variable we can call the method :
timesheetComponent.m_consumedApi.get_Impl()
to get an implementation of the current timesheet. This implementation has an attibute that has a lot of nice stuff about the current user and the current time sheet. This attribute is
_headerInfo
_headerInfo is a structure that includes tsUid which contains the timesheet Guid I was looking for.
Finally, the function attached to the button goes like this :
function _LaunchReport() {
var tsUId;
var rptPath;
var tsImpl = timesheetComponent.m_consumedApi.get_Impl();
try
if (CONST_REPORT_PATH == null || CONST_REPORT_PATH == "" ) {
alert("Constant CONST_REPORT_PATH is not defined")
else {
tsUId = tsImpl._headerInfo.tsUid;
rptPath = CONST_REPORT_PATH + 'TimesheetDetails&rs:Command=Render&rc:Parameters=false&TimesheetUID=' + tsUId;
window.open(rptPath);
catch (Err) {
alert(Err)
CONST_REPORT_PATH is the path to SSRS defined elsewhere
I hope this will help some other poeple !
Maybe you are looking for
-
I'm buying a new MBP this week and having a bit of trouble deciding which configuration. Any help would be fantastic. I plan on using this for light video editing with Final Cut Studio 2 and encoding as WMV files. My budget will only allow for a 15"
-
TS1368 Itunes can't save the phone backup to my computer does any one know why thanks
itunes can't save the iphone backup to my computer does anyone know why thanks
-
My iMovie '09 won't import or export any video.
Somebodys going to say it's a formating issue, this can't be the problem because I've been importing and exporting for at least 7 month. All in .mp4 format. So this is my evidence that formating can't be the issue to my problem. When I chose to impor
-
Need to install software to MacBook Air
Hi, I need to install CS3 (already installed in my MacBook Pro) into my MacBook Air but I don't have a CD drive. Any solution please....
-
Reg: User Entered Value in LOV Window
Hi All, Following is the use case. I have an LOV ("PO Number") with its own controller. If user enters a partial value in LOV Field, (say 513), LOV Window comes up with results like PO Number starting with 513. Suppose, If user modifies the search va