Pruchase order in MM don't consume budget in the WBS

Hi fiends,
We are doing implementation for Public Sector with EA-PS, MM and PS (ECC 6.0).
We are having problems in the control availability or commitments of the WBS: duplication of the commitments in WPS:
    - In EA-PS create a Funds Commitment (FMZ1) : 10u20AC
    - In MM create a Purchase order: 10 u20AC
In our model the committed should be 10 u20AC instead of 20 u20AC.
We need that the Pruchase order don't consume budget in the WBS.
Is there any way of doing these operations?
Thanks in advance.
Carlos.

Hi,
In std SAP commitment is created after creating a PR or a PO against the project.so you need to look how to prevent the this.
Wait may be expert will advice you regarding this otherwise you can send request to SAP directly about the  requirement they can give you the solution,
Regards,
Muzamil

Similar Messages

  • Consumed Budget Getting Reversed

    Dear All,
    I am facing one typical error, please help me out to resolve the same.
    Issue:
        Consumed Budget is getting reversed after MIGO
    Scenario:
       I've Created a Material PO for which system has done the AVC check and posted the budget document by consuming the budget from available amount.
          Say...
          I've enter the Budget of Rs. 10000/- and i've created a PO worth of Rs.2000/-
             Now, when i am checking the report FMAVCR01, system showing as follows
            Consumable Budget       Consumed Amount    Available Amount
                      10000                          2000                      8000
    Step 2:
       With ref to above PO, when i am creating the Goods Receipt (MIGO) AVC is working fine and created the budget document
      But, here comes the problem that, when i check back the same report FMAVCR01, system is showing
    Consumable Budget       Consumed Amount    Available Amount
                      10000                          0                     10000
    Where actual it shold, show as consumed amount is 2000 and available amount is 8000
    In adition to this, when i check the report FMB_PT01
    it is showing residual budget as Rs.8000 only ( which is correct)
    and in report FMRP_RFFMEP1AX (Document Journal)
        System should show the GR created as (Invoice -Val Type Text) and Amount Type 0100 - Original Value and for PO it should show one line item with 0100 - original value and 2nd line item with 0500 - Adjusted by Followon Document) which is actually not happening.
    So, can anyone please look into this issue, and give some suggestions where to check and required modifications to resolve this issue.
    Thanks in Advance to All
    Raja

    Hi Alex,
    Thx for the reply.
    We are using Update Profile 000359
    and in OFUP - GR/IR Update control we are using GR and INV.
    Now tell me what else i need to cross verify and changes required to resolve this issue.
    Thanks.

  • In original Budget crossing the limit for a particular order no error procd

    Hi
    In budget where the amount exceeds the original budget without showing any error message for budget exceeding. for example order no:xxxx amt 100000 and posting amt 200000 without error system proceeding. But generally system don't allow if we crossing the limit for a budget. here there is no error. I have to make it to appear error. Any solution is to rectify..
    Thank u

    Ya I am using Transaction group ++ and i am not using any exempt cost element. In quality its working if budget exceeding its showing error properly not alowing to post. Bust in production its not showing any if budget crossed limit allocation.
    Its showing in ko23 : eg Budget 2012:23000, Current budget 2012:23000, Assigned 25000
    I dont know why its like that in production. Please give me any idea whether any problem in order
    But its working good in quality not in production. I checked starting to end all configuration.
    Please give all idea as soon as possible.

  • Asset Retirement Refunding Consumed Budget.

    We run SAP with Funds and Grants Management for Grantee active.
    The system was set up to consume budget at asset acquisition.
    We have some assets which have been sold off or scrapped, when we try to recognize these on the system via ABAVN for instance, we realized that SAP is crediting back the budget in funds management ( into asset acquisition commitment item) and grants management (into asset sponsored class/sponsored program) with the value at which asset was purchased.
    I would appreciate advise on how to resolve this issue.

    Thanks Ming and Shyam,
    Your suggestion works perfectly for the Funds Management Module, but it is still crediting the Grants Management module with the acquisition value when asset disposal is posted. The only option I have now is to go to GM_UPD_SETTINGS and manually set the asset acquisition GL account range to post statistically when the asset sale/scrapping is being done.
    I feel this is not proper and there must be a way around this. I would appreciate more help please.

  • Consume budget from upper level fund center

    Hi ,
    PSM-BCS / ECC6.00
    I have created a fund Center Hierarchy,
    I have defined Level 1 fund centers as Budget address and level 2 & 3 fund centers as posting address. I want level 2 and 3 fund centers to consume the budget of level 1 fund center.
    what settings are required to make the above scenario work. Also the otherway, can i restrict  level 2 or 3 fund centers from consuming budget assigned to level 1 fund center.
    I don't know if this is a right approach. Please advice how can i make this work.
    Thanks
    Shekhar

    Hi,
    I have created a strategy for derivation of Budget address and assigned it to the Budget Structure.
    Derivation RULE
    Fund Center --> Fund Center
    FC-B (level 2)  =  FC-A (Level 1)
    FC-C (level 2)  =  FC-A (Level 1)
    Then I have maintained budget for Fund/FC-A/Committment Item in FMBB.
    But when I am posting(FB50) to FC-B, i am getting an error "annual budget exceed for Fund/FC-B/Committment.
    Do I have to do some other configuration or reconstruct or reinitialize or any other steps I should to do?
    Please advice.
    Best Regards
    Chandarshekhar Y.

  • Need HELP (Project Issue) : Having 3 individual VIs, datalogger.vi, start vi, amksms.vi done. (How to run the VIs in sequence order - datalogger start amksms combine into 1 VIs? )

    Need HELP (Project Issue) : Having 3 individual VIs, datalogger.vi, start vi, amksms.vi done.
    (How to run the VIs in sequence order - datalogger > start > amksms combine into 1 VIs? )

    VIs in icon.
    how would it able to run in the sequence order:
    data first, follow by start and lastly amk sms.
    Attachments:
    dsa.jpg ‏10 KB

  • I want the t code to see the against which service order payment was done ?

    i want the t code to see the against which service order payment was done ?

    you can use ME2S, but if not what you are looking for then ask ABAP to develop a customized report for service orders only for whom payment is done.
    regards,
    qsm sap

  • Sending Alter Text  by mail automaticlly on item level of pruchase order.

    There is a 'Alter Text '  listed on the tabpage 'Texts' at item level in pruchase order.
    I want to send  content  of 'Alter Text '  by mail automaticly as end user change the text .
    How to implement this requirement?
    Thanks

    There is a 'Alter Text '  listed on the tabpage 'Texts' at item level in pruchase order.
    I want to send  content  of 'Alter Text '  by mail automaticly as end user change the text .
    How to implement this requirement?
    Thanks

  • TS3988 My credit card was charged about $100 for 8 different transactions.  Five were for 9.90.  These dates are Aug. 6, 7, 28 and 29.  I have not ordered anything and don't know what they are for.

    My credit card was charged about $100 for 8 different transactions.  Five amounts were $9.90.  These dates are Aug 6, 7, 28 and 29.  I have not ordered anything and don't know what they are for.  Please help me.  Linda Feddersen

    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    Linda.. if you have not done so, contact your credit card company so they can monitor your account.
    And change your Apple ID password ASAP >  Apple ID: Changing your password

  • The budget is consumed two times of WBS element

    Hi
    My probem is that The budget is consumed two times of WBS element . The
    first consumption is purcharse requesition (ME51N) and before the
    second consumption is funds precommitment .
    For us the wbs elements WBS are statistical budget .
    how do we consume one times ?
    Thank you for attention .
    Best regards

    Hi ,
    check this link as it may help you :
    http://help.sap.com/saphelp_45b/helpdata/en/86/98853478616434e10000009b38f83b/frameset.htm
    Thanks,
    Dhruv Kumar Malhotra

  • Funds Management - Current budget Vs Consumable budget

    Hello -
    I have posted a budget entry document with budget category 'payment' and posted few commitments and actuals , when I run the Budget Consumption oveview report - budget amounts  are shown under the column ' Current Budget' not under consumable budget and nothing is shouwn under consumed budget as well. Where as I have posted an entry document for budget category ' Commitment' earlier, thats being shown under consumable budget and all budget consumptions are recorded. Both the entries are made with one document type which is assigned to 'automatics release'. I am using update profile 102 - PB , inv, posting date. What is that i am missing ?
    Thanks in advance
    CHris

    Hi Chris,
    I suppose that you are using BCS, if not, kindly let me know.
    Can you please inform your EA-PS package? In addtion, can you please confirm if the report that you are using is transaction FMRP_RW_BUDCON? If you are using this one the value columns of this report are the following:
    Consumable Budget =  from availability control
    Consumed Budget =  from availability control
    Available Budget = Consumable Budget - Consumed Budget
    Current Budget = from budgeting
    Commitments and Actuals
    Therefore you can check each field with the table values.
    For AVC fields (that check the value from availability control) you should check the value from the report in table FMAVCT.
    Current Budget from your budget transaction or reports.
    Commitment and Actuals from table FMIT.
    Let me know your comments about these information. I hope it helps you.
    Best Regards,
    Vanessa Barth.

  • Should PPDS orders consume capacity in the SNP Capacity view in 9ASNP94?

    Dear Gurus
    Should PPDS orders consume capacity in the Capacity View in 9ASNP94?
    We currently only use PPDS, but are looking to implement SNP for mid-range planning and S&OP.  I would like to demonstrate the simplicity of the capacity view in SNP, but the planned orders in PPDS do not consume the capacity of the Resource in the standard planning book/view SNP94(2).  We are using Single mixed production resources which I thought were suitable for both PPDS and SNP planning.  This is a particular concern because I would expect that the SNP and PPDS horizons will have to cross over and so PPDS and SNP will have to take into account the capacity consumed by orders in the other module.
    Any help will be appreciated!
    Elamobel

    If you are using PDS you probably need this BADI:
    Note 657185 - RTO: Sample code for calculating bucket consumptions 4.0
    As standard only the continuous consumption is maintained in the PDS by the CIF, the bucket consumption (which is the SNP view of capacity) is missing.
    Check the related notes too (especially 1462965)
    If you are using PPMs you can just maintain the missing data directly

  • Sales Order and Invoice qtty both consuming credit limit

    We are facing a problem where the credit limit is getting consumed by both the sales order as well as the subsequent invoice, thereby creating a double impact of one transaction. I ideally what should happen is that after invoicing the "Sales Value" field should get reduced and the "credit exposure" should get increased. However, in our system this is not happening. The net impact is explained by this example:
    Sales Order Value : 20000
    Invoicing: 0
    Credit Exposure 20000
    Sales Order Value 20000
    Invoicing : 20000
    Credit Exposire : 40000 - This is wrong. This sohuld be 20000
    Please to help.

    Dear Intrigue,
       What do u mean by invoicing value? Are you talking about 'Recievables'?
    In FD 32 credit exposure is the total of Recievables + Special liab + Sales value.
    1)After the creating the sale order the value 20000 will be updated under sales value. (Table S066)
    2)After creating delivery document the same 20000 will remains there only under sales value. (But internally table will be changed. This 20000 will get reduced from the table S066 and will update in S067 under 'open delivery' field)
    3) After creating invoice also the 20000 will remain there only under sales value. (But internally this 20000 will get reduced from 'open delivery field' and will update under 'open billing doc.' in same table S067)
    The above invoice value will remain there only until it is released to accounts. After releasing it to accounts the value 20000 will get reduced from 'sales value' and will update in 'recievables' in FD32.
    Total value in recievables is the value of the FI accounting documents for which payment is to be recieved. After recieving the payment this will be cleared off.
    Now tell me what are you comparing with? sales value and recievables or anything other?
    Ratna

  • How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out?  At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

    How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out?  At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

    Compass Health Systems wrote:
    How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out?  At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.
    No, there is not setting for a default printer.The system scans for available airprint printers each time you print.

  • TS2516 I placed an order but I don't low if my order went thru. How can I be sure?

    I place an order but I don't know if my order went thru to process. How can I be sure?

    Click on the Store button at the top.  In the next window click on Accounts and selecxt Check Order Status:
    OT

Maybe you are looking for