Quantity Posting Required (SPRQ),

Dear Friends,
For an Inspection Lot, System status is
UD   Usage decision has bee
LTIN Long-term inspection
PASG Plan/specification ***
CCTD Insp. characteristics
CALC Sample calculated
RREC Results confirmed
STIC Short-term insp. compl
SPRQ Quantity posting required
SPCO Stock posting complete
STUP Statistics updated
In inspection Lot tab, inspection Lot qty is 4000,
but total quantity posted is 0 and To be posted is also 0.
And in Stock overview, no quantity is there in Quality Inspection stock type
Please tell me how to post full quantity.
Thanks and Regards
Prashant Atri

Prashant,
For the status you provided on the lot, it appears to me that the lot is completed.
According to your posting you have zero stock in QI.  According to the statuses you provided in your first post, the stock posting is completed, (SPCO), and the UD is made (UD).
What makes you think you still need to post against this inspection lot?  You don't say that you are missing material in unrestrtcited stock. 
The inspection lot quantity should not change.  It always remains the same, i.e. whatever the initial lot qty was +- any lot qty. corrections. I'm wondering if you are confusing this and thinking that needs to be posted?
The only thing odd about your lot is the "amount posted" being zero.   Typically it should equal  some value between zero and the lot qty size. What does the sample size value equal on the stock posting screen shown just under the inspection lot quantity? Are they equal?  If so, is there any chance one of your characteristics is set up as a destructive test?  In that case, the system could think the entire lot was destroyed in testing.  Hence zero stock to post, posting complete and no stock in unrestricted.
If you have the stock in unrestricted, then I come back to the question of why do you think you need to post against this inspection lot?
FF

Similar Messages

  • BAPI_INSPLOT_SETUSAGEDECISION Error during quantity posting for inspection

    Dear SAP Guru,
    I used a BAPI call : BAPI_INSPLOT_SETUSAGEDECISION in my program to perform UD and post Q-stock to Unrestricted stock. The BAPI executed successfully for my developer user account but not for end user account login.
    The BAPI returns an error as below:
    Error captured in system: EQV                  054Error during quantity posting for inspection lot 340005776022, manual proc. Required
    Guess some authorization object for the BAPI_INSPLOT_SETUSAGEDECISION call is missing.
    Have tried SE97 for possible Authorization Check for Start of a Transaction but not able to solve the problem.
    Can anyone help? Really appreciate that.
    Thanks and Regards.

    Hi ,
    Run the transction SU53 after the error with user login id , to see authorization .
    Amol

  • Error: No depreciation  posting required in period 009 (current period)

    Hi,
      I am getting error " No depreciation posting required in period 009"  and  009 is my current period.
       The description of the error says " Do depreciation is posted, since according to the posting cycle no postings are required in this period".   In fact this is the first time i am running depreciation. I want to post the depreciation for 1st period. More over i could not able to see the planned values in asset explorer also.
       Whenever i am entering this asset in the asset explorer it is  giving the above error. But while i run the depreciation its not giving any error. When i check in spool to view the depreciation, its giving msg as "List contains no data" check error log.
      Could anyone help me in resolving this error.  what could be the reason for this error.
    Thanks
    Sabera

    Hi,
      I checked in TABA table, its showing that till 9 the period depreciation has been posted. But i have not posted the depreciation. If it is posted, then it has to show in the planned values as posted, but its showing as "No depreciation"  and its not even showing the depreciation for other periods.  Could you able to clear this query? I wonder why it is giving this kind of error.
    Regards
    Sabera

  • How to get MRP elements - quantity received/required

    Hi all
    I have a report and I need it to show the quantity received/required for each material in a plant due to MRP execution.
    Basically something like MD04 showing each MRP element entry (Deliv., OI-SL, Order, etc) but a sum of quantity received and required
    Do anyone knows a function, bapi, or other that can helps calculate this?
    Thanks in advance

    Hi,
    Sometime ago I were asked to solve a similar problem.
    Just try FM 'MD_ABBL_REPORTING', see if this FM meets your requirements.
    Hope it helps!
    Best regards,
    Carlos Constantino.

  • Reservation: withdrawn quantity exceeded requirement quantity

    Hi Gurus.
    Please help.
    Is there a way to check why withdrawn quantity exceeded requirement quantity in reservation? System should get standard message M7362 when this happens. Settings in OMCQ are correct.
    Thanks in advance...

    Hi,
    The message might relevant for the scenario of GI to reservation, which issued quantity greater then reserved quantity in reservation.
    You may check your reservation with MB25 for listing your reservation document and I suggest to use MB26 for collective and more accurate GI processing of relevant reservations.
    Cheers,
    Girang

  • The quantity received/required for each material (only sum of Dep and Foreq

    Hi all
    I have a report and I need it to show the <b>quantity received/required</b> for each material (<b>only sum of Depreq and ForReq</b>) in a plant due to MRP execution.
    Basically something like MD04 showing each MRP element entry (only sum of Depreq and ForReq)
    Do anyone knows a function, bapi, or other that can helps calculate this?
    Thanks in advance

    Hi srivalli,
    U mean that for every material u need sum of recieved quntity and required qunatity? if this is your requirement.
    Try the synax below.
    Example.
    itab - internal table of any sturcture. suppose itab  consits of materil and quantity fiedls.
    sort itab by matnr.
    loop at itab.
    At end of matnr.
    Sum.
    Write: itab-matnr, itab-menge.
    ENDAT.
    endloop.
    This syntax will display the sum of quantity for each material.
    <b>Reward if useful</b>
    Any thing please reply back if you have any other doubt.
    Regards,
    sunil kairam.

  • Additional field for quantity posted

    Dear Friends,
    While doing UD there are some fields for the quantity posting such as to unrestricted,to scrap,to block etc.but there is no field for to rework or rejection.As practically there may be a situation that the material which is non confirming in quality may me rework & clear it ok.
    now please tell how can i add that field for rework in that area.
    Please reply.
    Regards,
    Chandra.

    Dear Chandra
    My suggestion will be use Block for Rework purpose. Please add this in your Blue Print process.
    Please find the rework process for your reference
    Rework & rejection
    1. Reject the material in QA32 to block stock
    2. Reverse faulty material using Tcode MB1A u2013 262 movement type against the production order
    3. if you need to scrap highly faulty materials   use Tcode MB1A u2013 551 movement type against a cost centre
    4. Create a rework order using Tcode Co01 order type (PP03)
    5. Enter the Parent production order number in the goods receipt tab in Co01. (inbound delivery)
    6. Issue goods against the rework order using MIGO
    7. confirm the rework order through co11n
    8. Move the material back from block to quality using Tcode MB1B u2013 349 movement type (activate 08 inspection)
    9. Inspection lot created
    10. do the posting accordingly
    Regards
    gajesh

  • ML81N Negative Quantity Posting for Credit or Difference Adjustments.

    ECC 5.0 - DIMP
    This is a VERY, VERY common situation at nearly all companies where a credit or small difference may occur between the invoice amount and the SES.  Reversing / canceling and reentering documents, along with all of the additional accounting documents created is not an appropriate option.
    =========================
    I have a situation with Service Entry Sheets where a vendor delivers services for a PO line item.  There can be MANY service entries, and MANY invoices for a single PO Line item.
    Invoices are posted against the open GR SES amount on the PO Line Item and not specifically to the service entry sheet.  As a result there may be more than one invoice tied to a single service entry sheet.  The reversal option would requie
    When credits come in, or when vendor discounts are taken the SES amount does not match but there is a need to ensure that the SES amount matches the vendor credit amount (whether credit memo or discounts taken). 
    NUMEROUS SAP OSS Notes say that Negative Service Entry Sheet Amounts are possible, and in the first step I even get an SE042 warning message about the negative quantity.  However, when I press ENTER to go past the warning I then get messgae SE396 as a hard error and the dialog box for the error has JUST an exit button causing the entire transaction to exit the process.
    Has anyone ever worked successfully with negative service entry sheet quantities?
    If so, what were your lessons learned?
    Here are some of the notes I have reviewed, and the ability to do the negative SES quantity goes back to 4.6:
    365648
    375799
    411262
    455707
    1068156
    1166693

    Hi Bill,
    If you try to save an SES with ONLY a negative quantity you will receive               
    the following error Value of specs. less than zero (function cannot be                 
    performed) Message no. SE396.
    You can enter negative VALUES based on the               
    following rules:                                                                               
    The service specifications contain lines with negative values.                         
    Service lines with negative values are only allowed if the following                   
    conditions are fulfilled:                                                                               
    The total value of the specifications is positive.                                     
    The total value of each account assignment is positive.                                                                               
    Please see other notes attached.                                                       
    354903 Postings: Invoices for services                                                 
    499575    FAQ: Invoice verification/goods receipt in service                           
    1174830 FAQ: Invoice cancellation for services       
    Regards,
    Edit

  • Procurement of more quantity than required in case of non stock items

    Dear Experts,
    Requirement is given below.
    I have one maintenance order with non stock item category N for quantity 5 pieces which is actual need.But user wants to procure 50 pieces against order and consume 5 pieces and rest will keep as stock.
    But in case of procurement against non stock item the moment we received the Goods (GR), all procurement quantity  will goes to consumption account and postings will happen accordingly.Correct me if i am wrong.
    Now my requirement is to keep the remaining stock 45 pieces (5 pieces consumed against actual need) as stock and to be consumed whenever there is a need.Can it possible to keep as stock in storage location which was procured against order as non stock item.
    How can i resolve this issue.
    Please somebody can help me.<<Text removed>>
    Thanks in advance.
    Reddiy.A.V
    Edited by: Matt on Oct 12, 2011 6:46 AM

    For the orders which you consumed, do the reversal of that material document. Also create one GR for the qty which has been returned to vendor & keeping the stock to storage location.
    In future, define those as stock items, so that this work around won't be required.

  • Purchase Tax posting required on WBS

    Dear Experts,
    Need your help urgently for this:
    When doing invoice verification (MIRO)
    Cost 440/- is posted to WBS - OK
    Tax @ 8% is posted to Cost center mentioned in cost element  of Tax G/L.
    I have to mention Cost center in cost element, otherwise it gives error:
    "Account 50100072 requires an assignment to a CO object"
    I want all the cost to be posted to WBS, which is now getting posted to Cost center.
    How can I do this?
    Thanks in advance...
    SSanjay

    Dear Ravi,
    Thanks for the help provided.
    Purchase Tax G/L 50100072 is a P/L type & not BS.
    I checked in field status of Account group (G001) of this G/L
    in FI -> FI Global Settings -> Ledgers -> Fields -> Define Field Status Variants,
    Field Cost Center & also WBSE are optional & not mandatary.
    Still it gives message at invoice:
    Account 50100072 requires an assignment to a CO object
    Message no. KI235
    Diagnosis
    You have not defined a CO account assignment for an account that is relevant to cost accounting.
    System Response
    Account 50100072 is defined as a cost element.
    This means that you must always specify a CO account assignment.
    Procedure
    Enter one of the following CO account assignments
    Order
    Cost center / cost center/ activity type
    Sales order item (for a project or cost relevant)
    Project / WBS element
    Cost object (Process manufacturing)
    Network/ Network activities
    Business process
    Profitability segment
    Real estate object
    The posting row affected is 0000000003, account 50100072.
    Please help.

  • Automatic KANBAN quantity calculation requirement -reg

    Hi,
    As of now we enter  no.of KANBANS and KANBAN quantity  while creating control cycles for the material to be operated through KANBAN. The KANBAN quantity is decided at user level and updated  which is causing many discrepencies .
    the requirement is can system calculate the KANBAN quantity automatically driven from the requirement calculated based on finished products PIR quantity ?
    1. is it possible  that when MRP runs for the finished product  system calculated the KANBAN quantity for those BOM items of the Finished products which are marked as relevant for KANBAN.
    2. if it is possible then what and all settings and other things required ?
    3. any side effects?
    please provide some inputs
    regards,
    madhu kiran.

    Hi,
    Pls. find inputs for respective queries as below :
    1. Yes it is possible with using Kanban with MRP , pls go through the following link for details about Kanban with MRP :
    [KANBAN With MRP  |http://help.sap.com/saphelp_erp60_sp/helpdata/en/cb/7f932e43b711d189410000e829fbbd/frameset.htm]
    2. For Automatic Kanban Calculation pls go through the following link which gives all detailed settings & requirements for the same :
    [Automatic Kanban Calculation  |http://help.sap.com/saphelp_erp60_sp/helpdata/en/cb/7f932e43b711d189410000e829fbbd/frameset.htm]
    3.There are no side effects of automatic kanban calculation because It is Std Functionality given by SAP.
    Hope this helps resolve your issues.
    Revert in case any doubt.
    Regards,
    Tejas
    Edited by: Tejas  Pujara on Apr 29, 2009 6:58 AM

  • SCCM installation and post requirements

    I have searched several threads regarding the permission prerequisites for SCCM installation but have not found one that cleary addresses my question.
    I have setup the appropriate permissions with the SCCM computer accounts and site installation service account added
    to the local administrators group on the SQL server. Is this access still needed for post SCCM installation or can it be reduces once installation is complete?
    I would like to remove the SCCM computer accounts from the SQL local admin group post installation and reduce the SCCM service account from the sysadmin role on SQL.
    What is the supported configuration post installation?

    The official response is that we require admin rights to all site system computers, even after installation. There are ongoing tasks we perform after installation that will fail and generate errors/status messages if you were to remove it.
    With that said, for SQL Server:
    If the customer removes the local admininstrators group from the SQL sysadmin then we still work.
    Hi Wally,
    do you mean the SQL sysadmin right for SCCM installation service account is not required after the installation? is it officially supported by Microsoft?

  • R12 12.0.4 Onhand Quantity SQL required

    Hi guys
    We are a huge retailing company and currently in the process of implementing a custom made application for POS. One of our requirements is to reserve a given quantity against a particular item and once the PO received from the customer, raise a Credit invoice against customer account. Throughout last couple of years after the R12 implementation we kept on adding in-house built modules, mostly for tracking the on-hand quantities. We never used the material reservation until the custom application integration.
    As we are planning to go live with the custom built application, we are in a requirement to alter our on-hand quantity scripts throughout the custom modules and reports. Right now we are using the following query to fetch the on-hand quantities:
    Select onhand_quantity from
    Select sum(onhand_qty) onhand_quantity, inventory_item_id, organization_id, subinventory_code from
    Select sum(transaction_quantity) onhand_qty,inventory_item_id, organization_id, subinventory_code from mtl_onhand_quantities
    group by organization_id, subinventory_code, inventory_item_id
    union all
    Select sum(reservation_quantity)*-1 onhand_qty,inventory_item_id, organization_id, subinventory_code from mtl_reservations
    group by organization_id, subinventory_code, inventory_item_id
    group by inventory_item_id, organization_id, subinventory_code
    where inventory_item_id = :item_id and
    organization_id = :org_id and
    subinventory_code = :subinv_code
    Should we consider anything else? We tried to use "apps.INV_QUANTITY_TREE_PUB.QUERY_QUANTITIES" API, unfortunately while compiling we got compilation errors. Please forward your suggestions
    regards,

    Thanks Sandeep
    Unfortunately, we do use move orders quite frequent (OM team just confirmed) and there are just few entries in MTL_MATERIAL_TRANSACTION_TEMP table. A total of 6 records dating back to 2010.
    Anyway we are going ahead with the current setup and will include this table if differences are found at later stages. Thank you very much for your replies.
    Regards,

  • QA11 - Quantity Posting

    HI All,
    Iam posting some quantity through the QA11 BDC by considering the Materials having the quality stock(having the inspection lot origin = 09 only). But for some materials the qauality inspection stock is maintined in both the 08 and 09 types. In that case my bdc is failing with an error message "The Sum of the Quantities that still must be posted is    100".
    Could u suggest me how to post the quantity through the QA11 successfully(with 09 only). Is there any BAPI or alternative to post it ?
    Thank you.
    Regards,
    Padmasri.
    Edited by: Padmasri on Jul 30, 2009 2:36 PM

    Check BAPI_INSPLOT_SETUSAGEDECISION
    Kanagaraja L

  • Wrong ATP Stock quantity and requirement

    Hi friends ,
    My orders are not giving correct confirmation as per stock .
    In Product view ATP tab i saw some confirmation quantity against sales oreder in total . But actually there is no Sales order iagainst it neither in R/3 nor in APO . Also no order detail exist for those orders in ATP view .
    Can anyone please tell me why i am having such a wrong ATP view ? Will appreciate your kind suggestions .
    Thanks & regards
    Nitesh

    Hi ,
      Please check the ATP time series transaction and see any order exists there.
    I remember there was the same problem of showing orders in time series in the past. I guess there is a note for this from SAP can you check out for that...
    Regards,
    Deepthi.

Maybe you are looking for