Question: What do I do if ipod does not respond even after reset

I tried the advise, holding the sleep button and when the red slider appears I touched on the home screen until it fades. Still doest respond if aI turn on the pod. Please help, I can buy a new one anymore

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • HT4061 the screen is blank and the phone does not respond even after pressing the on/off and home button. the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

    The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?

    This is the ipod touch forum

  • Hi tutor,my system preferences remains in hang and it does not respond even after force quit.May i have a advice la

    my sytem preferences remains in hang and is not responding even after force quit,may i have suggestion la

    Hello: Welcome to Apple Support Communities!
    Could you specify the Mac OS X version and also what computer you
    are using it on, with some detail? Some of these kinds of issues, while
    they may seem the same across various years of OS X, can have
    different causes and also different cures.
    With that information, someone may be capable of researching a reply
    most suited to try & see if it works in your computer + OS X system.
    One idea, which may/may not help, would be to start the computer
    from its most recent OS X DVD install disc, unless it has OS X 10.7
    or Later, where there is a Recovery partition on the HDD to boot from.
    Then use Disk Utility> repair disk, while there, also repair permissions.
    Thanks.
    Good luck & happy computing!

  • IPad touch screen does not respond even after full restore and update

    I have an iPad 2 64 GB
    It has for a number of months intermittently stopped responding to any touch screen inputs. This issue began almost as soon as I opened the iPad for the first time. As it was happening very rarely and normally responded eventually, so I thought nothing of it.
    This week the iPad will not respond to any touch input at all (Home, On/Off, Volume and Mute buttons still respond). I have tried the hard reset process a number of times and still nothing.
    I backed up the device to my machine and applied the latest update 5.1.1 and still no response. I then did a factory reset and still nothing.
    I have never dropped or damaged my iPad in any way.
    Does anybody know of any ongoing issues with the touch screen or a solution to this problem?

    Thank you.
    I've already booked myself in to the Genius Bar this week.
    I suspect it is a hardware failure and more specifically a loose internal connection.

  • HT201412 iPad screen does not respond, even after several resets (both with iTunes and at the Apple Store). Apple is also unresponsive to a hardware problem once the product warranty period has expired. Does anyone have a suggestion?

    It is getting very frustrating to have Apple products.
    Constant software upgrades and product releases seems to be the sole focus of Apple.
    Apple does not offer hardware repair services. I can understand this policy when products do not fail. But it seems that this is not the case with Apple, as it becomes frequent that products fail just after the warranty period.
    New software releases also destroyed the value of a "GREAT EXPERIENCE". YouTube, Google Maps, ... all features that are deleted with the latest IOS and that Apple could not properly replace.
    It seems that Apple products are not 'consummable' products but 'disposable' products.
    Let's see how robust SAMSUNG tablets are

    Apple has hardware repair services, on repairable hardware. Apple just doesn't repair iPads, from day one Apple has always replaced iPads, either under warranty or as a reduced cost out-of-warranty purchase.
    The rest of your post is just a rant. Enjoy your Samsung products.

  • IPhoto does not respond even after I upgraded to iLife '11 version

    Every time that I attempt to open up iPhoto it immediately freezes, and all the sites and manuals I have read say that I need to reinstall the program, I need to upgrade to the '11 version anyway (I had the '09 version I think) so I just bought the upgrade from the app store hoping that would fix the issue. Now it does open for two seconds, then says that I need to upgrade my library. I click ok and then it freezes up again. I am beyond frustrated and could really use the help, thanks!

    Apple has hardware repair services, on repairable hardware. Apple just doesn't repair iPads, from day one Apple has always replaced iPads, either under warranty or as a reduced cost out-of-warranty purchase.
    The rest of your post is just a rant. Enjoy your Samsung products.

  • Mail application does not respond even after forcing quit over and over

    My mail application is not responding. I have forced quit at least 5 times and I still get the beach ball. This just started happening 2 days ago and now I can't access my mail at all.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • IPod does not respond at all when plugged in

    Alright, this topic is for people who have had this exact problem only. I don't want to get this confused with other problems and have people trying to help troubleshoot multiple problems and get things mixed up. Here's the problem.
    After updating to v1.1.2 of the iPod software, the iPod does not respond when plugged in. The iPod still works fine when not plugged in. It plays music and both the standard and shuffle play modes work accordingly. The problem is when you plug the iPod in, it doesn't charge and it doesn't mount. The orange blinking light does not come on. While plugged in, it works the same way as it does when you're listening to music with it. It's as if the iPod's USB connector is dead. Here is my original post and description of the problem.
    Alright, so here's my story. I bought my 512MB Shuffle in April. It has worked perfectly fine since I got it. Last night, I updated to v1.1.2 of the iPod software, clicked no when it asked if I wanted to restart, added some songs to the iPod, then restarted. As of this morning, I went to listen to some music while out for a bike ride, and I was greeted with the red battery light. I thought it was a bit odd since I had left it plugged in overnight. I figured, what the heck, I'll just plug it in and let it charge when I get back. When I got back, I plugged it into my PC and left for a while. I came back later and went to grab my Shuffle and I noticed it was cold, which was unusual after charging for a couple hours. I plugged it back in, a bit frustrated, and it never came up in Windows. I looked at the iPod plugged into the back of my PC (a high powered USB port) and sure enough, no orange light. No lights at all. I can still slide the switch to one of the play modes (standard play or shuffle) and play music for a couple seconds before it stops and says the battery's dead again. It works.. I mean it turns on and plays music, it's just not charging or mounting when I plug it in. I tried multiple computers and USB ports, none of which worked. I would really like some help with this considering it IS my only source of portable music and I'm not going to go pay $50 to talk to tech support or have it sent in for repairs. That's half of what it's worth.
    I've tried uninstalling all iTunes/iPod related software from the PC I normally use it on and reinstalling it. That didn't work. I also tried uninstalling again and installing the last known working version of the iPod software, still no results. The only thing I havn't tried is giving it a good beating... Not that I would. Anyways, I hope there's a solution to this that doesn't involve buying a new one.
    Here's a rundown of the computers I tested it with.
    500MHZ G4 Cube (384MB RAM/Mac OSX Tiger)
    400MHZ G3 iMac (384MB RAM/Mac OSX Tiger)
    4.2GHZ AMD 64-Bit running Windows XP Service Pack 2 (my PC)
    515MHZ Dell running Windows 2000 (256MB RAM)
    UPDATE: The BIOS won't recognize the iPod, so it has nothing to do with my computer. Somehow, installing v1.1.2 of the iPod software made it so the iPod itself has USB problems. The iPod works to the extent of playing music and showing the battery charge level. I get no response at all when I plug it in, from the computer or the iPod.
    I'm going to have to agree with Philip Harhay on this one. The original 10GB iPod I bought 3 years ago came with a full one-year warranty, no extra charges. I am disappointed to see the Shuffle only coming with a three-month warranty.
    ------------------------------------------------------------------

    Help! I just purchase an iPod Shuffle for my son's birthday and I cannot get the darn thing to show up on my iMac G5. I am running OS 10.4.2 and I have downloaded the latest iPod and iTunes software. When I try to restore my iPod to the factory settings it tells me to plug the iPod into the computer, but it is plugged in. I have tried different USB ports, too. I'm running out of ideas and so is the trouble shooting Apple site. I was hoping someone out there might have some ideas.
    It showed up at first and I transferred a few songs from the iTunes to the iPod but I couldn't get them to play, so I plugged it back into the USB and the icon never came up.

  • After upgrade firmware my iPod does not respond to touch. Help me!

    After upgrade firmware with iTunes my iPod does not respond to touch.
    To be more precise - works, but very, very bad. And around the icons on the display is visible GRAY line of width 1 px.
    Please HELP me! This iPod - the gift for my girl.
    p.s. Maybe this problem arose because I reflash iPod with old cable from the iPhone?

    Thanks all, i solved the problem yourself.
    I helped this one topic: http://discussions.apple.com/thread.jspa?messageID=12641053&#12641053

  • Ipod nano 6th gen - the sleep/wake button does not respond. already tried resetting, restoring.Help!

    ipod does not respond when i press the sleep/wake button. 
    it only comes on when plug in to power supply or using the resetting method (pass and hold the sleep/wake & vol down button). 
    tried restoring and after restoring, ipod screen hangs, does not respond at all. same for sleep/wake button...
    lost! can someone help pls!

    Hello Ryan,
    Since it sounds like you have already tried all the usual and available troubleshooting techniques, I would make a trip to your local Apple store/Genius Bar and have them take a look at it.  Your iPod is still under Apple's 1 year warranty that cover any defects (but not accidental damage!).
    B-rock

  • My ipod touch does not start up after resetting

    my ipod does not turn on after I reset it. It shows an apple logo and flicker white screen until the battery goes dead.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • If my apple ipod does not respond

    If my apple ipod does not respond to on/off and screen does not respond to touch, does it go back to the shop where it was bought or does it have to be sent to apple?

    For warranty work it depends on where you purchased it. Some resellers have a limited time for when it can be returned and after that you have to go to the manufacturer.
    You can go to Apple at any time. Make an appointment at the Genius Bar of an Apple store.

  • Ipod touch screen not working even after resetting to factory specs

    ipod touch screen not working even after resetting to factory spec.  lock symbol appears at top

    That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

  • My ipod will not open even after following instructions online

    my ipod will not open even after following instructions online

    Do you mean you can't unlock it?
    We have no way of knowing exactly which online instructions you may have tried.
    Apple - Support - iPod touch - iPod touch Troubleshooting Assistant
    iPod touch: Hardware troubleshooting

  • Photoshop crashes each time i start it and it then does not respond and after 3 to 4 min sarts

    On starting photoshop on my macbook pro it crashes and does not respond and only after 4 minutes does it start, does any one have any suggestions on how to fix this as it is annoying to always have to wait for photoshop to start

    Hi Andy.  Can you give us some information?
    Which version of OSX?
    Which version of Photoshop?
    Is this a new installation? Or how long has it been working OK before this problem?
    Do you have any external drives?
    What are your Photoshop Scratch disk arrangements?
    The sort of issues that can cause a crash on start up are bad fonts
    Fonts — Troubleshoot
    Third party plugins
    Looking for a scratch disk that does not respond
    Driver problems — video card being a big one.
    Troubleshooting Steps to Fix Most Issues

Maybe you are looking for

  • What is the best practice to replicate the change of an object name in HANA AT/AN view where there are dependent views in it?

    Dear All HANA Studio Experts, I'm using SAP HANA Studio Version: 1.0.68 in our current landscape and looking for a expert and intelligent solution for a problem that we have encountered recently. We have created multiple AT views, AN views and create

  • Problem in sun web server : user-mapped section open

    Hi Friends, I am using sun web server7.0. When i am trying to update the struts-config.xml file through my application. I got the following error message. The Struts-ConfigXML couldn't be Modified Reason: C:\Program Files\SunWebServer7\https-java1.to

  • Can't install OSX on a Macbook with Windows XP!! alone on it

    Hey, I have a Macbook pro on which i have only Windows XP  . I want to install OS X10.5 on it and by no means i can boot the machine from DVD. I have tried the this below, 1. To boot on Safe mode - dint work 2. To boot in Single user mode - dint work

  • Edit Appraisal through MSS

    Hi We are about to implemented MSS and Appraisal (MBO). I want to create an Appraisal via MSS but I'm not sure how to do that. When I select My staff -> Employee Review -> Edit Appraisals I get the message 'No suitable appraisal template is available

  • Put a coded value inside a field

    What is the easiest way to insert a value from a function into a field. For instance in the USER_CRE field i always want to put the value SessionInfo.getLoginId(); I tried to do this by editing the get-method for USER_CRE in both in the entity object