R7950 TF 3GD5/OC BE ISSUES HELP ME PLEASE

I have two of these cards, one worked fine no worries at all. Would run max at games on 70 no issue at all, added another today and it cuts out at 67degrees, now i ran a test individually as the crossfire wasnt working.
The new card seemed to be the issue it cut out at 67, i went back to my old card and now that does exactly the same
1 old card worked fine
2 added new card and xfire wouldnt run past 67 degrees
3 removed old card and tried only new card, wouldnt get past 67 degrees
4 tried old card and that wont get past 67 degrees now
CANT PLAY any games at all. HELP :(
running a test on GPUZ it works fine running on 100% or 95% stress test as its not getting over 67 degrees
GPU temp 65
VRAM 1 65
VRAM 2 68
GPU LOAD 96%

CPU doesnt get over 47 degrees in full use.
As for the PSU worked fine yesterday if its broken its developed a fault since adding an MSI card

Similar Messages

Font Rendering Issues-Help Required Please

In the past week, any Google search on Firefox or Chrome (but not Opera) gives me results where the fonts look gappy. Sometimes there are additional dots above the letters. I uninstalled and reinstalled Firefox from scratch in case an add-on was at fault but even with a clean install I am still seeing the issue. I checked my font settings and do not have any minimum font size set. I have allow pages to choose their own font ticked.
I've uploaded an image where I can see some correctly rendered text and some gappy looking text (not from a Google search but a Mozilla query). It also happens when commenting online sometimes, during typing it will be gappy but it will show properly once submitted. Any ideas for a fix would be warmly welcomed and I can give more examples if that would help. Although it's not Firefox related, I did restore all defaults in Chrome and it didn't fix the issue there either.
I uninstalled the most recent Windows Update since the problem is recent but it didn't change anything. I'm not sure if browsers would even look to my computers fonts.

hi Auds77, this is probably caused by microsoft update kb3013455 which can cause font rendering issues on vista:
<blockquote>After you install security update 3013455, you may notice some text quality degradation in certain scenarios. The problem only occurs on systems that are running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available. </blockquote>
<sup>reference: https://support.microsoft.com/kb/3013455</sup>
one option may be to [http://windows.microsoft.com/en-us/windows/remove-update#1TC=windows-vista roll-back this particular update] for now until there is a fix by microsoft or you could also look if there is a [[Upgrade your graphics drivers to use hardware acceleration and WebGL|graphics driver update]] available on the website of the vendor (intel/amd/nvidia) which might also resolve this problem in some cases.

So..this is new to me. my apple id has been disabled for some reason..it's not cool how i can't install apps or even update them.. i've tried to already reset my password and that doesn't help..can someone whose had the same issue help? please?

so, just read the title, there's not much that i can say about this..it ****** me off. who else has had this problem..should i just sell it and buy a new one..or is it because of the update? I'd appreciate the help and maybe some step by step instructions on how to get it working if you guys wouldn't mind.. thanks

contact itunes support

Start-up issue HELP ME PLEASE! ASAP

At start up computer goes to blue screen that says:
Esc=boot menu> F1=Setup>F10=system recovery>
Than immediately goes to a black screen that says:
Reboot and select proper Boot device
Or insert Boot Media in selected Boot device and press a key_
I pressed f1 n looked to see if a hardware was detected n in second channel device 1: it says WDC WD800BBect. So I'm assuming it detects a hardware. Idk I saw that on up website I'm confused n not computer programmer need assistance asap. Please help me

Here is what I would do if I were you:
I have seen one or two of these types of errors get resolved by ...
- unplugging the power cord
,-pressing the power button on the pc for 5 seconds while the computer is already off
- opening the case and unplugging the hard drive power and IDE/SATA cables
- Reconnecting power and turning it on and wait for an error to appear.
- turn off
-unplug power cord
- reconnect cables to the hard drive
- reconnect power
- turn on and hope for the best.
- if it magically works again, replace side panel... make sure to create a set of recovery discs.
More than likely though, you will either need to reformat the hard drive (if you can access it) or replace it. Either way, if you want to keep your computer and you need to restore/replace the hard drive - you will need HP recovery discs to get the original software build on the PC. Alternatively, you could install a fresh operating system that meets its minimum system requirements.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

IPad issues HELP QUICK PLEASE!!!

HI THERE!
I HAVE RESET AND RESTORED MY IPAD. I HAVE A VODAFONE MICROSIM BUT IT IS NOW SAYING NO SERVICE. HOW CAN I REGISTER IT TO GET A SERVICE!!????
PLEASE REPLY QUICKLY!

Call Vodafone and don't type in ALL CAPS. We don't appreciate being YELLED AT.

MSI R7950 TF 3GD5/OC BE DXGI_ERROR_DEVICE_REMOVED

Hi, sorry I speak very low english,
I have a brand new system:
Graphics: MSI R7950 TF 3GD5/OC BE (Serial number is: 602-V276-18SB1212032385
Board: Asus Sabertooth FX990 rev 2.0
SSD: Corsair 240GB GTX
RAM: 2x 4 GB 1866Mhz Corsair Vengeance
PSU: Corsair GS800
CPU AMD 8350
Cooler: Corsair H100i
Windows 8 PRO 64 bits
I have problems playing crysis 3
Appear the error playing, "DXGI_ERROR_DEVICE_REMOVED" all the time 30 secs and crash,
I have tested the stable drivers of ATI, and the lastest beta and is the same.
No overclock, all stock, defaults on msi afeterburner and ati catalist...
Some people say to undervolt the graphics card the problem are oc graphics cards... Anyone know the solution to solve the error: DXGI_ERROR_DEVICE_REMOVED
Printscreen:
link: htt*********p://img832.imageshack.us/img832/8615/problemhk.jpg
Remove the *******

I put some prints of the game,
h*****ttp://img163.imageshack.us/img163/2152/print1a.jpg
h*****ttp://img833.imageshack.us/img833/5125/print2b.jpg
h*****ttp://img854.imageshack.us/img854/8485/print3q.jpg
remove *****
Is in french sorry
I have all extreme, max settings.
I change for test to high settings, and is the same, the graphics is good but the game crash.
I need some help because the game dont
This crash is with clock to 880 and all stock, just put on ati catalist best performance view printscreen:
This crash is with clock to 880 and all stock, just put on ati catalist best performance view printscreen:
h********ttp://img824.imageshack.us/img824/777/print4d.jpg
MSI after burner:
h************ttp://img853.imageshack.us/img853/1109/print5h.jpg
I use the MSI lastest drivers.

MSI R7950 TF 3GD5/OC BE too high stock voltage

Hi, this is my first post so please be gentle with me
I just bought a MSI R7950 TF 3GD5/OC BE video card which is 960mhz stock speed, but I found out that this card has a too high stock voltage which displays 1.18v in GPUZ and 1.25v in afterburner. I don't think the card can last long with such a high voltage so I want to lower it.
I try to adjust the voltage in afterburner, it seems it changes in the software (the slide did change). But GPUZ still displays the same voltage.
Can anyone help me with this?
Thanks.

Quote from: tails on 07-April-13, 22:29:57
Thanks for the reply.
I've found the solution for that. I downloaded the version 3.00beta9 of afterburner and now it can change the vcore.
I changed the vcore from 1.25 to 1.05v. Now the card is running at 1050mhz, 57degree with 60% fan speed, cool and quiet. Before was 75 degree and 80% fan speed.
I'm satisfied now.
Ive got Afterburner 2.31, its allows undervolting as well. But problem is that in boost mode new values are ignored and back to default. So in that case cant see any sense in doing that. Is that changed in ver 3?
D.

VBIOS request - 2x R7950 TF 3GD5/OC BE

Hello folks, I'm looking for the latest UEFI BIOS to help Windows 8.1 out a little... and maybe my motherboard will stop complaining.
GPU Model: R7950 TF 3GD5/OC BE
Serial Number Card 1: 602-V277-130B1308042869
Serial Number Card 2: 602-V277-130B1308042717
Current BIOS version: 015.031.000.001.001867 (113-C3861300-X03)
Current BIOS link... h t t p ://1drv.ms/1mVBjTD
Thanks in advance.

Use the attached.
Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (270.rar) and put the included file (TV277MH.270) on that stick.
Rename TV277MH.270 to 270.rom. Put the atiflash.exe also included in the archive provided on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 270.rom [ENTER] and let it flash the vbios.

[REQUEST UEFI GOP vBIOS] R7950 TF 3GD5/OC

Hi，please help me to get UEFI GOP bios
R7950 TF 3GD5/OC
S\N: 602-V276-020C1210038413
thx!

There is no such available for this one,
you can ask msi tech about it here: >>How to contact MSI.<<

Toshiba 50M2U Display Issue - Help!

Colors are not displaying correctly on our Toshiba; dark colors are replaced with a green hue. It's most noticible in the initial boot up, with the red TOSHIBA logo appearing on top of a green screen that should normally be black.
I messed around with absolutely every setting on the tv. Tint, contrast, brightness, color, reset to factory settings, etc...
None of it fixes the issue I'm wondering, is it the LED lamp panel that's messed up? Has anyone ever had this issue before?
Please let me know if there's anything that can be done about it!

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G.

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

I am not sure, I have full signal on my iphone 5 and just 1 dot on my ipad, tomorrow I will test connection with other router and network, I thank you for your help and I will tell you the test result when done

Palm 680 Issues HELP!

My phone powers on normally everything works great! once the backlight times out I cannot wake the phone back up! None of the keys work after the initial screen timeout! I can recieve calls fine, but I cannot make any phone calls due to not being able to use any of the functions or buttons!
I tried to reset the phone but it just wont reset!! HELP ME PLEASE!
Post relates to: Treo 680 (AT&T)

Try a 10 second soft reset by taking out the battery for at least 10 seconds. This allows the device to power off completely, like a shutdown on a PC.
If that reset doesn't fix the issue you will need to try a hard reset that will put the Treo back to the factory condition. The hard reset will erase all data on the Treo.
Click on the following link to the kb.palm.com webpage for the article regarding reset procedures.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
Are you sync'ing the device to the same username in Palm Desktop as an older device?
If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device.
You may need to hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Next before you hotsync your data back over you will need to rename your backup folder, to do that go here;
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treo/treo680att/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

R7950 TF 3GD5/OC support GOP?

Hello,
I have 2 x R7950 TF 3GD5/OC in CrossFire along with a Z77A-GD65 (Bios 10.8) working with Win8 pro x64, and i´m willing to know if there are a updated version of Vbios/firmware to enable GOP ??
S/N: 602-v277-05sb1205073706
S/N: 602-v277-05sb1205073710
Best regards.
Frost.

here it is.
flash it by booting from USB key, then execute:
atiflash -f -p 0 xxxx.BIN [ENTER]
where xxxx.BIN will be your vbios file

My iphone serial number claims to have been replaced. But it is actually not. I need to get it replaced for a screen issue ASAP! Please help

My iphone serial number claims to have been replaced. But it is actually not. I need to get it replaced for a screen issue ASAP! Please help

This was told to me by Apple Store reps... They have asked to contact Apple support help line .. nobody answers there.. I am stuck! There is no email id that i can find either to contact Apple support

R7950 TF 3GD5/OC BE ISSUES HELP ME PLEASE

Similar Messages

Maybe you are looking for