Read this if you have the Looping Audio issue...

I was having this problem and it was driving me nuts. It would do it randomly everytime I used iTunes. I searched around the web but could not find anything related to this issue except for these forums.
What fixed it for me -
Go into your Sound preferences and look at the Output tab. Is the balance centered? Mine wasn't. It was moved a few notches to the left. This problem has been occuring for quite awhile where the balance will move by itself! I moved it to the center and have NOT had a single problem with the looping audio anymore.
Try it! Let me know if it works! =)

I had same problem not with XP but with Windows 7 beta. I posted online and a lot of people said Realtek this and Realtek that, it didn't work for me. I finally tried installing Bootcamp 2.1 and voila it worked. While it was installing drivers, I noticed bootcamp saying "Removing Realtek audio ... " then "Installing SigmaTel audio ... " few seconds later i started hearing all the bells and whistles of Windows 7. Woohoo!
I guess Realtek works for some people with various configurations but for me it was Siggy.

Similar Messages

If you have the No Audio Device Issue, I finally found a solution...

MacPro, XP
I tried all the easy solutions with making sure the Windows Audio was working, the Device Manager, etc.
The solution that worked for me was
First, uninstall SP3 on the Windows side (you do this through the control panel, add/remove programs)
Install Boot Camp 2.1 on the windows side.
(FYI, this version of boot camp would not run for me unless you have Leopard on the Mac side. I had OSX 4.11 or something and had to upgrade to Leopard)
If you have the Leopard installation disc, simply input into the drive on the Windows side.
Next reinstall SP3
Worked for me - hope it works for you.

I had same problem not with XP but with Windows 7 beta. I posted online and a lot of people said Realtek this and Realtek that, it didn't work for me. I finally tried installing Bootcamp 2.1 and voila it worked. While it was installing drivers, I noticed bootcamp saying "Removing Realtek audio ... " then "Installing SigmaTel audio ... " few seconds later i started hearing all the bells and whistles of Windows 7. Woohoo!
I guess Realtek works for some people with various configurations but for me it was Siggy.

CMSS can cause for weird results. Please read this if you have surround issues

I'm a musician who frequently uses the Audio creation mode because this is the environment most optimal for creating music. For some time now, I've facing a certain problem where today, I finally found the solution about.
my problem
The problem I was having, is that some applications (they're optimised for stereo) played sound on my center speaker differently than those who use the windows 7 drivers. What happened in a nutshell, is that when I play sound in flash, the center speaker volume is about 3 times as loud as all the other speakers. Although this gives a nice and clear sound for presentations, this can be a pain when you want to listen to music.
my setup
For me, this is a bit awkward, because I have a big room where my speakers are positioned for my TV. My computer is next to my tv, but my center speaker is not in front of my pc monitor, but rather in front of my tv. Due to this, the right ear gets way more sound than my left one. Strangely enough, it weren't all the applications that had trouble with this. My music player plays everything equally throughout my speakers.
the mixer
The creative mixer (startup console) has several ways of tweaking this. Like assigning what channels to play if sound gets played through L/R, and their individual volume bars. You can guess it maybe. Changing these settings affected both applications differently. I could use the sliders to fix one, and then mess up the other. So when I went through all my settings I couldn't find what causes this.
CMSS is the fault here
I went reading this forum, and came to this post: http://forums.creative.com/t5/Sound-Blaster/How-to-enable-sound-for-my-center-rear-and-side-speakers-using/td-p/52 What gives, this option is not available when you are in Audiocreation mode. So it shouldn't affect my sound right? WRONG!
the problem
Even though you can't tweak the settings during audio creation mode, the settings are still in affect. So you have to switch to entertainment mode to access the CMSS-3D. I went there, and I had stereo enhancing surround enabled. When I changed that, it solved my problem. Since during audio creation, I mainly use stereo applications, I do not need surround enhancement.
my setup now
I turned it off, and as suspected, windows only parses sound to the left and right, not the other channels, even in audio creation mode. In the mixer, I have enabled output to all 7 channels I have for L/R output, and now the sound gets balanced to all my speakers. True, I get stereo sound over all the speakers, but when I want to use surround, I switch to the entertainment mode anyway.
Could a mod sticky this? I think its worth to have this stickied.

So my touchpad wasn't working and I have an HP dv6-6135dx. It started being messed up shortly after I took my PC apart to upgrade the screen. Sometimes it worked perfectly, sometimes it was completely unresponsive, sometimes the ring around the touchpad was lit, other times it wasn't etc.... It got worse and worse to the point where the touch pad almost never worked.
I followed this guide, and it didn't fix the problem; however, this got me thinking, and I pulled the keyboard out and reseated the touchpad cable where it connects right under there. BAM works perfectly. THANK YOU so much for this post, for some reason I didn't think to reseat the cable... I must have not plugged it back in completely when I took my laptop apart. You can find the service manual for the dv6t here Its in the first post

READ THIS if you use the observer APIs ...

This is just a heads up for developers who take advantage of
the observer APIs in Spry. For the next version of Spry I plan on
making the observer APIs for both the Data Set and the Dynamic
Region consistent.
Currently in Spry PR 1.1 the data set observer mechanism
requires that you register an object with an onDataChanged method
on it. This method is then called with a notification type
(Spry.Data.DataSet.ODC_*) which developers have to manually check
against and conditionally perform their action.
In Spry PR 1.1, the observer mechanism used for the dynamic
region requires that you register a callback function, which gets
passed a region state (Spry.Data.Region.RS_*) whenever it is
called, and it is up to the developer to check against the region
state and conditionally perform their action.
For the next release of Spry, I plan to move to the following
model:
- Both data set and region observer mechanisms will require
an object which defines notification methods for which it wants to
be notified for.
// Create an object with notification methods.
var myObserver = new Object;
myObserver.onDataChanged = function (notifier, data) {
alert("OnDataChanged called!"); };
// Register your object as an observer on the data set.
dsMyDataSet.addObserver(myObserver);
- Notification methods will all have the same signature:
function (notifier, data) {}
The notifier is the object that is dispatching the
notification, and the data is an object that will contain
information regarding the notification, where necessary, or
undefined if no additional data is necessary for the notification.
When called, the 'this' object within the notification method
will be the actual observer object.
- We will publish a list of notification methods that can be
defined on the observer object for both the data set and dynamic
region.
- *All* methods on the observer object are *OPTIONAL*, which
means you only have to define the notification methods that you
want to be called for. For example:
var observerA = new Object;
var observerB = new Object;
observerA.onDataChanged = function (notifier, data) {
alert("observerA.onDataChanged called!"); };
observerA.onSortChanged = function (notifier, data) {
alert("observerA.onSortChanged called!"); };
observerB.onDataChanged = function (notifier, data) {
alert("observerB.onDataChanged called!"); };
myDataSet.addObserver(observerA);
myDataSet.addObserver(observerB);
In the example above both observerA and observerB will be
called whenever the data changes, but only observerA will be
notified whenever a sort happens.
- Some events will have pre and post notifications. For
example onPreLoad(), onPostLoad(), onPreUpdate() and
onPostUpdate(), etc.
If you have any opinions, concerns or feedback on this. Now
would be the time to speak up.
--== Kin ==--

As one person who asked for this, I like what your planning.
Is that onPreLoad() an event that will get fired before an Ajax
request goes out for new data? Cuz I could really use that.
A tagentally related thought: Notifications are great, but in
some cases, I might want to control whether some behavior happens.
Say, perhaps I want to control whether the load actually happens.
In that case, I'd want a delegate object, which would have some
methods on it that could cancel the event that is going happen.
Just as an example:
var delegate = {
willFireLoad: function(...) { if (somecondition) return
false; else return true; },
unknownValueForKey: function(key, dataset) { ... return
dynamic value ... },
unknownValue_desc: "Description"
dataSet.setDelegate(delegate);
The first would allow me to stop the data from being loaded.
The second would allow me to return a value for a key that isn't
present in the dataset. And the third could be a way to hardcode a
value for the key 'desc'.
Just kinda an idea as far as what could be done, and I'm sure
there might be other control points too.
-d

HP pavilion dv6 touchpad stopped working (read this if you have dropped your computer)!

Hello, this is not a question it is advice for people having touchpad issues with their dv6 (I've noticed a quite a few posts). My touchpad suddenly completely stopped working one day (didn't respond to anything that I did).
Most of the forums I've been to (actually, all of them... and they were many) ask you to try reinstalling the driver. However, if you did not recently uprage your OS or make any such major changes this is not likely to be the issue.
Try going to device manager. If your touchpad is not showing up under the mouse and pointer devices section (it should say Synaptics something or other) then it means that either something is broken OR your touchpad came unseeded.
For me, it was the second option (I drop my laptop... occasionally). The cable for the touchpad is held in place by a little plastic lever-like clamp. It can easily become loose, so try this out before taking your computer into a repair shop (and loosing it for weeks, not to mention the price if you're not under warranty!)
Three easy steps:
1) take the removable bottom cover off (that little plastic bit in the center where your hard drive is). For my model (6145dx), it just snaps off (with a flathead screw driver or other tool for leverage). You might have to unsrew a few things, but it should be easy.
2) Take out the hard drive (held in place by 4 screws in most cases). You do not need to disconnect the cables leading to the hard drive! Just pull it out and lay it off to the side.
3) Toward the very front of your computer (right under where your hard drive was, and where the touchpad is on the top cover) you will see the ribbon cables coming from your keyboard, touchpad, etc. Give them a little wiggle (just pull the plastic tabs that stick up. If one of them moves, then you need to re-clamp it! Push the cable all the way in and push down the lever.
Super easy! Should solve all your problems!

So my touchpad wasn't working and I have an HP dv6-6135dx. It started being messed up shortly after I took my PC apart to upgrade the screen. Sometimes it worked perfectly, sometimes it was completely unresponsive, sometimes the ring around the touchpad was lit, other times it wasn't etc.... It got worse and worse to the point where the touch pad almost never worked.
I followed this guide, and it didn't fix the problem; however, this got me thinking, and I pulled the keyboard out and reseated the touchpad cable where it connects right under there. BAM works perfectly. THANK YOU so much for this post, for some reason I didn't think to reseat the cable... I must have not plugged it back in completely when I took my laptop apart. You can find the service manual for the dv6t here Its in the first post

READ This if you have a Yahoo email access issues on iPhone

It's just (10:53) been confirmed to me over the phone with 02 iPhone support that there is an email server down at Yahoo which is affecting iPhone email access for accounts set up on your iPhone with the Add Account - Yahoo Mail wizard.
There is NO estimation for a fix time, but support advised you to access your email via the safari browser (if you are mobile) and web access during this down time. Just go to http://new.m.yahoo.com
I hope this helps
Follow me on twitter and I'll post updates as I get them:
twitter.com/darrenaclarke

Thanks very much indeed for this, daccad. Would you mind if I pasted what you've written in the appropriate thread on the O2 forum?

ICloud you have the ability to NOT format phone numbers of contacts; this ability is not available on the contacts of iPhone. If I set-up a phone number in iCloud with NO parenthesis, ex. 123- 456-7899, then this format should be available on the iPhone

In iCloud you have the ability to NOT format phone numbers of contacts; this ability is not available on the contacts of iPhone. If I set-up a phone number in iCloud with NO parenthesis, ex. 123- 456-7899, then this format should be available on the iPhone contact.

That is correct is doesn't. Standardized formatting of phone numbers in the iOS app is more important because it supports contact from a variety of locations (gmail, hotmail, etc.). iCloud doesn't (not directly).

Is there anyone there? I hope there is someone who can you understand this problem and have the common sense to respond? I open gmail. I want to save an email to one of my folders. I position my cursor over the appropriate Folder icon or by choice, to th

Is there anyone there? I hope there is someone who can you understand this problem and have the common sense to respond?
I open gmail. I want to save an email to one of my folders.
I position my cursor over the appropriate Folder icon or by choice, to the Trash.
The friendly finger pointing cursor icon changes to an arrow icon.
The hand icon allows me flawless access to opening and/or moving emails.
The arrow, however does not open the link.
On the Google menu bar the cursor hand with finger opens the links to Everett (my name), Search, Images, Maps and Play.
When I attempt to open the remaining links in the menu bar (YouTube, News, Gmail, Drive, Calendar and More) the arrow icon replaces the hand. The arrow icon does not work. It will not activate these links. Nor does it open email messages in the Inbox.
Usually I reset, even reboot Safire and sometimes the problem goes away, then reappears.
Can you imagine if this condition should it happen to a tech savvy Google Support person? Perhaps one can share and make my problem go away.
I am considering dropping Google as my mail source. Unfortunate!
Everett Halvorsen
[email protected]
718.490.3824

I have uninstalled my Access Connection, but this problem seems to persist. IBM technician have changed the wireless card of my T60, the first few days after it was changed was very fine, no problem at all. About a week later, the problem occured again, and it happened quite frequently after that occurence. Now i really have no idea what is the cause and how to solve it. Will be greatful if there is anyone that can help me.

Firefox will updage. I get this message: Something is preventing firefox from updating securely. Please make sure that you have the latest version

I get this error message: Something is preventing Firefox from updating securely. Please make sure that you have the latest version of Firefox. I have uninstalled and re-installed. It did not work. Support tells me to click on Firefox at the top. I have no word at the top which says Firefox. I have the Firefox icon.

This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file firefox.js that overrides the update URL with a wrong link.
Do a clean reinstall and be sure to remove the Firefox program folder.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* [/questions/826858]

S4BB Audiobook won't work - this file could not be opened check that you have the correct permissions and try again

I bought the french audiobook J'accuse from S4BB and it simply doesn't work. I sought help from Blackberry and got the message that BB doesn't support 3rd party apps. I contacted S4BB, who by the way says they have a warranty on their apps, and got the email back that "for the issues and refund you would need to contact BlackBerry as the only way you can download to the playbook is through App World we do not have access to their system."
I have deleted the app and re-installed, uninstalled and re-installed, searched permissions (not listed there), and it simply does not work. It says "this file could not be opened check that you have the correct permissions and try again".
I put a warning comment on blackberry app world that the app doesn't work and that support is hard to get, and Blackberry has removed both the comment and the very low rating I have this. I found this to be the most disturbing part.
Is there anything I can do to either get this app to work, or get a refund on this app?
Also, why was this comment and rating deleted - this seems to be contrary to the nature of comment sections on apps and does not do a service to your customers who may download this app which doesn't work?

Try right clicking on the installer and select run as administrator.

Subclips of Independent Clip all have the SAME audio

I have a bunch of DV streams I want to edit in FCP, but I discovered that the audio is out of sync in most of them. Each stream has multiple shots in it, each of which I want to make into a subclip. Here's how I approached the problem:
1. I gave the out-of-sync DV stream a reel name in the Browser.
2. I opened the clip in the Viewer, set In and Out points to the extremes, and dragged it into the timeline.
3. I unlinked the video and audio, shifted the video to get it in sync, cropped the ends of the video and audio to start and end at the same time, and relinked the video with the audio.
4. I selected Make Independent Clip from the context menu.
5. I dragged the synced clip back into the Browser and changed its name.
6. I opened the new clip in the Viewer, selected the individual shots with In and Out points, and made each into a subclip.
For each clip, the first subclip I created in this way worked perfectly, but for some reason the subsequent subclips all have the same audio as the first subclip. What am I doing wrong?
~ Joel

I had the sync problem when capturing DV footage until I found and deleted the FC preferences file. I found this worked for several FC problems so I found a utility that saves the prefs before a problem starts. Then you can just replace the corrupted prefs file with the saved good one and you're fixed. I posted this problem to the forum and never found an answer as to why the capture sync gets hosed so I went with what works. I would work on why the captured footage is out of sync in the first place as described above.
Sorry but I do not have an answer for your sub-clip problem, just questions. Did you capture your DV tape as one individual file? Is the audio recorded on tape 48k and captured as 48k? I know I used to do the same thing as you to correct the offset... unlink the video & audio and bump the audio track until the sync was corrected. As long as I edited the clips on the timeline, everything stayed in sync and I just worked around the problem. For me, the prefs file was the answer.

How can I use airplay if my receiver does not have the small audio jack?

I have a harmon kardon receiver for surround sound, but it does not have the small audio input jack to hook to my small apple airplay. Any ideas? should I just us the LAN plug from my receiver to airplay and try to connect itunes to it?
Or, can I just attach an old ipod to the stereo and leave it there as a hard drive for my itunes?
Thanks!

You will need a cable similar to the link below.
Mini Jack on one end and a pair of RCA jacks on the other.
http://store.apple.com/us/product/HA832ZM/A/belkin-rca-stereo-cable-2-m66-ft?fno de=72
These can be purchased at Wal-Mart etc. for about $6
If you have an Apple Airport Express, that is what you need.

How can I upgrade my itunes to 11 version? It shows the legend "you have the latest version"

Hi,
I need urgent help!!
I recently upgraded my iphone 4, it works perfectly, everything all right with it, but... Next time I wanted to sync the iphone with itunes I couldn´t!!!
On the screen it shows a message saying that "my iphone cannot be read on this itunes because is not the actual version" and that I needed to upgrade it to the latest version, so I went to search for an update on the itunes menu and the message was "there are not new versions, you have the latest" but is not true!!!
So, I went to the itunes webpage to download the 11.1 version and once it was finished I tried to install it, but it happened nothing!
I am desperate and don´t know what to do, I don´t want to loose all I have there!!!
I would be so grateful if you could help me solving this problem!!
Thank you!
Yazz

If you're using 10.5.8, YOU HAVE the latest (iTunes 10) that will run on your OS.
If your mac is Intel, you can upgrade to 10.6 through Apple for $19.99, then run the 10.6.8 combo update and you'll be able to run iTunes 11.1.2 or 11.1.3

11.0.10 Update Issue - Problem saving documents - getting message "This document could not be saved. There was a problem reading this document (21)." The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers

Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices. Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved. There was a problem reading this document (21)." The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Read this if you can't hear callers or voicemail o...

If you can no longer hear callers, cannot hear your voicemail, and are tearing your hair out trying to get any help from the obvious sources (your service provider, Nokia, your local store) - do not panic.
Call 121, as if you are making a vm call. While it is connecting, adjust the volume control button on the right of the phone. You will find that this volume control button operates on a 1-10 scale and is completely different from the one that is normally adjustable from the main screen, which operates on a 1-30 scale. Hopefully you will start to hear the recorded voice and all will be well.
This is not mentioned anywhere in the handbook or any of the online resources. I eventually found a clue via a different help site - but couldn't find where the 2nd volume control was. Thank goodness I eventually stumbled upon it by accident.
I know I am not the only one to have lost connection with a caller half-way through a conversation. It must be a design fault of some sort. I am just relieved that I did not follow the Nokia diagnostics advice to reset my phone to factory settings (after backing up etc etc), or pay out vast ££s for the privilege of sending off my phone for a non-existent repair.
I am not techy - but I am posting this in the hope that it will save others the frustration, expense and time I have wasted over the past 3 days trying to get any sense out of Vodafone and Nokia. (I am sorry if that breaches some form of discussion board protocol - but it is a fact.)
If anyone from Nokia is reading this will you PLEASE update your handbooks to include this information, and take account of it within your online diagnostics page, which told me to restore factory settings. (Fortunately I have no idea how to backup data on my phone, and the advice didn't tell me either.)
If anyone from Vodafone is reading this, will you PLEASE train your sales staff and helpdesk staff to understand this problem.
Feeling calmer now ... off to make a large mug of coffee.

This is normal an also the same with other phone brands and OS. Even on android and IOS the call volume is different from the general volume of the phone. If you have a non-lumia nokia phone, it is also the same.

Read this if you have the Looping Audio issue...

Similar Messages

Maybe you are looking for