Regarding filling of setupt ables for inventory
HI All..
I ahjve to delete and refill teh set up tables fr stock.
In my cube I chekc n find there the last opening balance req 2lis_03_bx package was scheduled long back
after thata regular deltas are running.
now whn i m filling am I suppose to fill the opening DS first ie 2lis_03_bx or can i directly fill the 2lis_02_bf(delta) DS
check set upt ables rsa3...
delete lbwg
fillin sbiw, search for fill set up tables... searhcing would be your best option if you dont fnind it reply back and i;ll tell you how to get there... then again check in rsa3... you should find up dated record number, replicate in bw,,,
lbwq for delta maintanance... qrfc monitor outbound query....
rsa7- bw delta queue... hv fun
award points
Similar Messages
-
Error while filling set up table for Inventory
Hi,
While filling up setup table for Inventory, 2lis_03_bf, i get an error, Plant F041 doesnot exist. I am trying to fillup the table without any selections. Can anyone please suggest me a solution.
Thanks,
PraveenPlease check the following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Hope it helps you. -
Problem while filling the Setup Table for the DS 2LIS_02_SCL.
Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM -
Stored Procedure for Inventory
Hi Experts,
I want a SP for inventory if i choose filler warehouse and To warehouse then there should be an error if both warehouses are not excisable or both should non-excisable .
In simple i can transfer items only from excisable warehouse to excisable warehouse and non-excisable to non-excisable.
plz help me..
Thanks & Regards
Shiv SenHi shiv,
there is a work around for this.Make one udf at header level and pick the value of filler that is exciseable or not(Y or N),
make one more udf at row level and do same.
now compare both udf values...
********stored procedure************
if @object_type = '67' and @transaction_type in ('A','U')
begin
if exists
( SELECT T0.[DocNum] FROM OWTR T0 INNER JOIN WTR1 T1 ON T0.DocEntry = T1.DocEntry WHERE t0.docnum =@list_of_cols_val_tab_del and T1.[Udf_row] <> T0.[UDF_header])
begin
set @error =1
set @error_message = 'whse not have same property'
end
end
***************Fms for header level UDF**************
SELECT T0.[Excisable] FROM OWHS T0 WHERE T0.[WhsCode] = $[owtr.filler]
******************fms for row level**********************
SELECT T0.[Excisable] FROM OWHS T0 WHERE T0.[WhsCode] = $[wtr1.whscode]
hope it will solve ur problem -
Taking long time filling the setup tables for sales and shipment
Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth -
Records is not coming in Delta for Inventory Cubes.
Hi..All
We are working on BW3.5 SP11 since 01.07.2005.
We are facing a very serious problem in Inventory management data extraction from R/3 since 24.08.2005.
Our active data sources of Inventory Mangement are as follow.
2LIS_03_BF
2LIS_03_BX
2LIS_03_UM
We were regularly getting records through delta as per given schedule after intialisation on 01.07.2005 to till 23.08.2005.
On 24.08.2005 -- Delta schedule we had find out there are some records that were created in R/3 did not come in BW.
On 24.08.2005 -- records loaded in PSA was 20550. The same is appering in RSA3(EXTRACTORS) also.
The Last material document loaded was 4900154552 date 23.08.2005 time 16:56:05 of R/3, but there are many other material documents that were created on the same day but are missing in the extraction.
On 25.08.2005 delta schedule records are getting 0 (Zero). Not a single record is getting in RSA3 (Extractor).
on 26.08.2005 situation is still as it is. No record is coming.
Where as our average records per day is approx. 20000 nos.
The update mode for inventory is Unserialised V3 update, and the update program in R/3 is running perfectly fine as per schdule with no errors.
We could not understand why suddenly stop the extraction of records FOR INVENTORY MANAGEMENT. Because rest all
data sources like Purchasing,Sales and Distribution,Quality Mangement, and PP is working fine on same date.
We checked the data in extractor checker with giving UPDATE MODE "F"-Transfer all requested data.
Still it is showing 0 (Zero Records) for data sources 2LIS_03_BF,2LIS_03_UM.
The situation is still as it is as of now.
This is very crutial for our business. All inventory reports are showing data which is 3 days old.
Please give your advice on this issue. And how to get the records in PSA from R/3.
Regards,
NavinHi Ravindra,
Thanks for giving input. The problem got solved.
There was a problem with QRFC Table. Tcode LBWQ
Status was wait.
Thanks for giving feedback.
Regards,
Navin -
Our client wants a report for Inventory Ageing. (we are not using batch management)
Use tried to sell Standard report MC46 but they are not convinced with the results.
The issue is if the material is not consumed for last 399 days but today if some movement is there in that particular material, then the material is not shown as non moving. Actually the material was not at all used for last 399 days.
In mc.5 report there are key figures like last consumption, last good issue etc but the same problem is there with it.
We are trying to develop a customised report.
Please help.
Thanks in advance.Hi,
The Stock Aging Report displays the description of material that are stocked for n-number of periods at particular inventory locations( may be trading plant or manufacturing Plant). The details, which are displayed, are about the aging period for the selected items.
There are reports and T code are
MC.A ,
MC.9,
MM5B,
MMBE,
MB5M,
MC50 - Dead Stock ,
MC46 - Slow-moving items,
If the above reports not meet your requirement, you should develop your own ABAP program to meet your specific business requirement.
This is define in overall stock on value based, suppose a material is received in Feb-month, same material is received in Jan-2007 , DEC-2007 also.The total value of this inventory is say 90 lakhs, ( 30 lakhs of each month) so system will show inventory aging as below
stock aging less than 30 days, 90 lakhs
stock aging more than 30 days but below 60 days 60 lakhs
stock ageing more than 60 days but below 90 days 30 lakhs
Assuming that no issue taken place if issue is taken place, it will be deducted by default FIFO method.
You may have to develop an ABAP report.
However, look into the path: information system > logistics > inventory managment > material and explore all like MC.9,MC.A,MC.B & MC.C
Regards,
Biju K -
How to schedule job V3 unserialised Update job for Inventory
Hi gurus,
How to schedule job V3 unserialised Update job for Inventory management
What are the things need to be configured
Thank youHi,
In R/3 go to SBIW > Settings for Application-Specific DataSources (PI) > Logistics > Managing Extract Structures > Logistics Extraction Structures Customizing Cockpit
UIn this Screen you can define delta type, and the jog usign the control job option.
Regards,
Dani -
Creating a tax code in FTXP I can't fill in an account for NVV
Creating a tax code in FTXP,
for my tax code I've filled in a Tax Percent. Rate for Transaction Key NVV but SAP doesn't allow me to fill in an account for this
Transaction Key in the tab tax accounts.
What cuold it depend on?
ThanksHi,
Well NVV account key in sap standard is a non deductible key and it would not be display in OB40 for account assignment.
If you see NVV properties in OBCN it will display check box ticked for not deductible and posting indicat. 3.But if you want to use it for tax posting untick that check box and change posting indicator to 2.
Then it will show that key NVV in OB40 and let you assign gl for this key.
Regards
Arun -
Process order settlements not flowing into BI for Inventory
Hi,
I built a cube for inventory based on the standard extractors to generate MAC values. I have three MAC reports, each for daily, weekly and monthly. The reports give the right values at the at the month level , but whenever there is a settlement for process order done, BI does not pick the settlement value and this makes the MAC value shoot up at the daily and weekly level. I tried to a find an extractor for this settlement and could not find any. Can someone please help me with this ? Is there any datasource for settlement of process order?
ThanksHi,
Both Tomas and Debraj have provided good tips. Let me elaborate on this.
From SWU3, access Maintain Runtime Environment -> Schedule Background Job for Missed Deadlines by double clicking on it and execute it. You could maintain the interval until next deadline check. You could keep the number low.
Also, if you have the event queue turned on, some times the work items will stuck in the queues and took a long time for them to be available.
Best Regards,
Jennifer Cha
GRC RIG -
Long Time: Fill Internal Header Table for VBUK via Doc. Flow Predeces
Good Morning Support,
I have installed DMIS (2006_1_620) and DMIS_CNT (2006_1_620), both atthe level of SP = 13. Data Base = Informix.
The activity "Header Fill Internal Table for Predicting Flow VBUK via Doc" is taking a long time in execution.
I wanted to create an index to improve performance according to the note 1256679 but I can not because the tables VBFA and VBFCL are "Table cluster" and I have no way to create index.
Any suggestions?I open the remote connection.
Thanks,
Hugo.Hello Hugo,
There are 2 ways out of this :
1. Either convert the Cluster Table to Transparent Table.
2. Enable Cluster Handling by setting P_CLU to Y. But in this case, you will have to set the parameter for all the 3 activities for VBUK i.e.
a) Fill Internal Header Table for Table VBUK (Initial) -
> TD05X_FILL_VBUK
b) Fill Internal Header Table for Table VBUK via Document Flow -
> TD05X_FILL_VBUK_1
c) Fill Internal Header Table for VBUK via Doc. Flow Predeces. -
> TD05X_FILL_VBUK_2
Then re-run the previous activities in the above order so that the cluster gets filled.
Hope this helps.
Regards,
Suman -
Hi All,
Is there a way to make customized reports using ALV grid for Inventory reporting as like in Purchasing.
Regards
AshokI think you need to have those developed.
See threads below.
http://scn.sap.com/thread/321656
http://wiki.sdn.sap.com/wiki/display/Snippets/MM+Inventory+Report+ALV+GRID -
Offsetting Entry for Inventory Posting
Hi ,
While Working on Automatic Postings - Offsetting Entry for Inventory Posting
can any one explain me what are all General modification ,valuation modification entries made ?
What are all General Valuation Class applicable for GBB Entries & give me the G / L account details where the entries will be posted
Please give me solution on this
Thanks & Regards,
PioneerRefer belo link this may give some idea
http://d.yimg.com/kq/groups/54256/740187646/name/SAP_FI_MM_SD_integration_20090615.pdf -
Early warning system for inventory management,
Dear Friends,
I had an issue related to early warning system for inventory management, i.e, if the stock goes below the specified level the system should trigger the mail.
Pls. explain how to configure
regards
SureshSolved
-
Unserialized for inventory management?
Hi,
why unserialized update for inventory management, why not direct update and delta queue.
regards
anitha.Hi Anitha,
SAP Inventory Management system allows you to manage stocks on a quantity and value basis in order to plan, enter, check goods movements and carry out physical inventories.
Enables users to manage all the items purchased, manufactured, sold, or kept in stock. Services can also be defined as items, although they are relevant only for sales.
For each item, users enter the data relevant for a particular area in the system. This data is used automatically by the system for purchasing, sales, production, inventory management, and accounting.
Provides optimum support for business processes. Helps create orders, delivery notes, and outgoing invoices, automatically calculating prices, sales units, and gross profit. Enables complete control over stock quantities at all times and lets users analyze the financial aspects of stockholding at the same time. Allows users to control production on the basis of the items that are used for production and on the basis of the finished product and any by-products created.
http://help.sap.com/saphelp_nw70/helpdata/en/f7/64073c52619459e10000000a114084/frameset.htm
with hopes
Raja Singh
Maybe you are looking for
-
I have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port. Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port ? I thought it would be better going for a thunderbolt display monitor rath
-
I am getting this error since purchasing my latest book: "This page contains the following errors: error on line 1 at column 1: error on line 1 at column 1: Encoding error Below is a rendering of the page up to the first error" This message also appe
-
I installed Firefox and it won't open any web pages at all, why?
No matter what web address I type in nothing comes up. Even have tried clickig on the 'Getting Started' button and it won't open either.
-
Is there any tools in an Oracle database or by Oracle to encrypt data in the database in 8.05 database or earlier? How to be secure my database from hacking people??? If anybody have an ideas about Database Level Security, Please send message to my [
-
I am syncing my iPhone with microsoft outlook.
I am syncing my iPhone with microsoft outlook 2003. Prior to my last sync my wife sync'd her iPad. When I sync'd my iPhone my notes where removed and my wifes notes were copied. Where can I find a copy of the notes that were removed?? I have a PC