Regarding Maxdb Support

hi guys,
Can anybody answer me for below questions about Maxdb.
1) how many OS Support for Maxdb.
2) Does MaxDb support MSCS Cluster
3) who does the Maxdb support SAP or MaxDB? or both
4) Any document mentioning the Support Scope for MAXDB.
its ambiguity to understand, what extend SAP support(Services like Backup, Povising Middleware etc) for MaxdB.
5)Does the Support level for vendors on Maxdb is same like Oracle or mssql?
regards
Jai

All the answers for those question are available at PAM
http://service.sap.com/pam
regards
Juan

Similar Messages

MaxDB support for SAP XI 3.0 SP 18 (NW04)

Hi,
I need an advice.
We are using SAP XI 3.0 SP 18 (NW04) on MaxDB 7.5.0.046. Because of some issues with the database we are considering upgrading to 7.6. However, it is not clear if MaxDB 7.6 is supported for NW04.
service.sap.com/pam -> SAP NetWeaver -> SAP NetWeaver 04 suggests:
1. tab Database platforms
SAP KERNEL 6.40 64-BIT UNICODE Maintained until 31.03.2013; MaxDB
supported database version: MaxDB 7.5 64-BIT
2. tab Process integration (PI/XI)
supported database version: MaxDB 7.6 64-BIT
QUESTION IS: which tab (1,2) should I trust regarding supported database version for XI?
Best Regards,
Piotr

Hi,
2. tab Process integration (PI/XI)
supported database version: MaxDB 7.6 64-BIT is correct as ..
1. tab Database platforms
SAP KERNEL 6.40 64-BIT UNICODE Maintained until 31.03.2013; MaxDB
 is for application server ABAP
Award points if helpful
Regards
Umesh

MaxDB support for production systems

Hi,
I have a DMS with MaxDB version 7.6.00.18.
I opened OSS message regarding an issue. I got a solution, however I was told that '7.6.00.18 is very outdated and no longer supported for productive systems'.
I can install the latest patch but how do I know when MaxDB version is no longer supported for productive system.
Can someone refer me to a note/article?
Thanks,
Omri

here is the details i found
Especially make sure to check in the Product Availability Matrix (PAM) http://service.sap.com/pam that the MaxDB / SAP DB version you plan to use is released for your specific SAP product!
Note 1178367 - SAP MaxDB: End of Support Dates
Cheers,
-Sunil

Regarding PDK support for Internet Explorer 7.0

Hi,
 Can anybody tell me whether the Portal Development Kit supports Internet Explorer 7.0
Where can I get the information about this? 
regards
Brahmachaitanya

Hi,
Please refer SAPNote: 981710
Also for ur reference go through this thread
<a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=2754691&">Portal not supported in IE7.0</a>
- Nagarajan.

Regarding Language support

Hi,
Is there a standard language support for Portal and ECC in Russian and Ukranian given by SAP.
Where can I find this details? Any idea on this is highly appreciated.
Thanks and Regards,
Vivek.

Hi Vivek.,
The answer is yes, both the portal and ECC support Russian and Ukrainian. If you check the Platform availability matrix, http://service.sap.cm/pam choose netweaver, choose the language tab then portal you will find russian available since October 2005 and Ukrainian since January 2008
As for ECC same link, choose ECC and then the language tab, Russian since October 2005 and Ukrainian since April 2008
Hope this helps.
John

Regarding SAP supporting modules

Hi all,
My client is interested to implement SAP for shipping project. The system should be able to cater jetty, container terminals, Finance, HR, Logistics, Warehouse etc. It should also be able to integrate with multiple legacy systems developed earlier on J2EE technologies. Does SAP supports all the specified modules integrations? If not? Suggest me the other alternative please.
thanks in advance

Hi,
Yes the SAP system supports all the modules which you have mensioned above.So in order to integrate these modules u would have different steps to follow integration and also interfaces to carry. Yes SAP supports all the specified module integration. See to that the basis consultants and abapers set the interfaces and other settings correctly.
Regards
Can quary back if u have any issue
Asha

Regarding copying support message

We are using Solution Manager System from maintaining support desk
messages.
In our Solution Manager System using two client i.e. client 100 & 200
for maintaining different division support deak message.
Now, as per requirement we want to close one client & maintain all
messages in one client. But the problem is required all old support
desk messages in one client.
Therefore, pls. suggest how it is possible to copy all the support desk
message from one client to another for viewing purpose.
With Best Regards
Bipin Singh

Hello,
Deactivate Earlier message and activate the one suggested, check if you are using correct application area.
In the case of an error message, processing cannot be continued until user input has been corrected. You can also group the messages according to user classes by saving the messages as different versions.
After having saved the message categories as different versions, you can assign a version to certain users. This results in the same message appearing as an error message for one user, but as warning for another.
regards,
Prashant Rathore.

Regarding MaxDB

Hi Folks,
I tried installing ABAP Trial Version locally, First time it took around 45 mins to install and at the end setup has completed with the errors. After referring the help document i come to know that it needs Loop Back Adapter for stand alone machine, hence I configured the same by following the steps mentioned in the document. But now when i am trying to install the setup finishes within 2 mins and i observed that it is not installing maxdb server.
Can any one please guide me regarding the same.
Regards,
Jitesh Talreja

Hi,
please try to uninstall the failed installation first.
The installation program tries to install the trial version every time with the SID "NSP". So if it detects that this SID is already used it will abort.
To uninstall the version please follow the steps given in the first part of the following document --> link to the steps
Also please check your services-file that there aren't any entries like "NSP" are left.
Good luck.
Regards,
Norman Schröder

Best Practices needed -- question regarding global support success stories

My customer has a series of Go Lives scheduled throughout the year and is now concerned about an October EAI (Europe, Asia, International) go live. They wish to discuss the benefits of separating a European go Live from an Asia/International go live in terms of support capabilities and best practices. The European business is definitely larger and more important than the Asia/International business and the split would allow more targeted focus on Europe. My customer does not have a large number of resources to spare and is starting to think that supporting the combined go live may be too much (i.e., too much risk to the businesses) to handle.
The question for SAP is regarding success stories and best practices.
From a global perspective, do we recommend this split? Do most of our global customers split a go live in Europe from a go live in Asia/International (which is Australia, etc.). Can I reference any of these customers? If the EAI go live is not split, what is absolutely necessary for success, etc, etc? For example, if a core team member plus local support is required in each location, then this may not be possible with the resources they have u2026u2026..
I would appreciate any insights/best practices/success stories/or u201Cwaru201D stories you might be aware of.
Thank you in advance and best regards,
Barbara

Hi, this is purely based on customer requirement.
I have a friend in an Organization which went live in 38 centers at the same time.
With the latest technologies in networking, distances does not make any difference.
The Organization where I currently work in, has global business locations. In my current organization the go live was in phases. Here they went live in the region where the business was maximum first because this region was their largest and most important as far as revenue was concerned. Then after stabilizing this region, a group of consultants went to the rest of the regions for the go live in that region.
Both the companies referred above are successfully into SAP and are leading partners with SAP. Unfortunately I am not authorized to give you the names of the Organizations as a reference for you as you requested.
But in your case if you have shortage of manpower, you can do it in phases by first going live in the European Market and then in phases you can go live in the other regions.
Warm Regards

Regarding system support

HI gurus,
I am trying to create one Zsmartform.when i click on create button my system is giving a message like "CURRENT COMPUTER ARCHITECTURE IS NOT SUPPORTED"
I am using LINUX operating operating system.
Can any one suggest me wat may be the problem?How can i resolve this?
Thanks in Advance.

hi farook,
You should check some notes about SAPGUI for Java limitation. One of its limitation is cannot be use to create smartforms/smartstyles.
It's mandatory to use SAPGUI for Windows when you're going to program on SAP environment.
Check this Notes 736147 - Transaction Smart Forms does not work with SAP GUI FOR JAVA to be sure.
Some of friends are using wine to install SAPGUI for Windows on Linux environment to be able to program and use smartforms functionality. They said it works but I haven't tried it myself yet.
best regards,
ardhian
http://sapbasis.wordpress.com

Regarding Hyperion Support

Hello Oracle Experts,
Good Day!!!
I am working as a Hyperion System Administrator.
As i am working as a system admin i need to solve Hyperion application errors which are coming to me everyday.As some issues are very new to me.
I want documents or resolution procedures to resolve Hyperion system application errors or issues which comes regularly to Hyperion application users.Please provide me the required documents or procedures.
If you people are not the right candidates(team) to resolve my problem please suggest me the right candidates(team) and also provide me theright forum details.
Please help me out.
Thanks In Advance.
Warm Regards
Anilkumar.P

Hi Vivek,
Have a look at the following help documentation...
[Language Transport |http://help.sap.com/saphelp_erp2005/helpdata//EN/04/c89d3665c45904e10000009b38f839/frameset.htm]
[Language Import with Transaction SMLT |http://help.sap.com/saphelp_nw70/helpdata/en/a3/30ad5296b511d384bb0060975b04f3/frameset.htm]
Multi National Language Support tables SAP OSS Notes 15023 and 45619
Hope it helps!
Warm Regards,
Upendra Agrawal
Edited by: Upendra Agrawal on Feb 25, 2010 9:41 AM

Regarding multilanguage support...

Hi,
I have few reports which were developed in WINDOWS env using rep6i and they run in UNIX. few ODFs are used in these reports which were developed in english langauage..Now, my client wants to implement the same reports in ukraine and for that they want to display the content of all the ODFs as well as all labels in ukrainian language..Is there any way to do it other than redeveloping all ODFs and reports in this language?Can this be done with the help of some configuration file?

there are different approaches to multilingual support:
I remeber there was a tool in 6i (called translation hub i think), which was able to extract all static text-values from a form/a report, give you the chance to "translate" the texts with a frontend and then "inject" the translation into the module again. I also remember that the results was a new fmb (at leaft for fmbs') and, depending on the developer-client NLS-settings, the compilation create a language-secific fmb (i don't know if it worked the same way for reports).
The secord approach would be to have only one executbale (rdf or rep) and give it some language-information at startup and then read the language-specific parts either from some local file or from a database table in before-report-trigger. Anyway, you will need to make changes to your report.
i don't know what to do with odf.

Regarding CVS support in SUTDIO CREATOR--imediate requirment

hi ,
we are doing the project in jsf using creator. actually it is a big project (might contains some 1500 files) more than one developers may involve in it. we created a single project in sun java studio creator for project synchronization between developers and splited it as packages and imported this package structure in cvs.(This thing we had decided because whenever i imported the existing page that was created by other developers, the properties of that page hasn't been copied properly in creator )so we decided to go for cvs.
whenever i create a new package and file in creator. i have to create new folder and file in cvs (corresponding .jsp file, .java file, ) and i have to correctly check in the modified file by creator to cvs (ie ., managed-bean.xml, navigation.xml, project.prj, build-ext.xml, project.properties)
This thing is very trivial for us to synchronize the whole project as it grow long.
would u please tell us wheather cvs support is avail in studio creator or any other efficient way for project synchronization.
please post a solution immediately.

As Mark Dey explained in the thread at http://swforum.sun.com/jive/thread.jspa?threadID=51046, it's not difficult now to use an external CVS client with source for Creator apps. Adding a CVS feature to Creator is in progress, but we can't divulge the release date in advance.

Out of Band Dial Up... (Regarding Module Support)

Hi Friends,
Can I use the PVDM2-12DM module for Out of Band Dial Up management of CPE routers. Dialing to remote connected modem with Call Back function.
Might sound stupid, but I would also like to know whether the same is supported on Japanese PSTN system.
Thanks,
~sultan

Out-of-band management requires the optional Cisco network management module.
Initiate XMODEM upgrade. Initiate an out-of-band firmware upgrade. The XMODEM protocol is used to perform this upgrade

Regarding pendrive support??

HP SLATE7 VOICETAB 6102RA IS IT PENDRIVE SUPPORTED VIA OTG

Hey @Sankhanika ,
Welcome to the HP Forums!
I understand you're looking for information on OTG support for the Slate 7 6102RA.
According to the product specifications (available here) this Voice Tab does not support USB OTG.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Regarding Maxdb Support

Similar Messages

Maybe you are looking for