Regarding workflow error

Hi Experts,
Iam using the method " SENDTASKDESCRIPTION " which is in the standard object " SELFITEM ".But at runtime am getting the following exception ::
SEND                 
   IF_SWF_UTL_MAIL~SEND
exception occurred     .
Will you please help me to solve this.It is very urgent.

Hi,
Are you sure that:
Have assigned agents?
if so what ais the agent u assigned?
Are  the agents assigned are Valid?
Revrt back ,,
Regards
Naveen

Similar Messages

  • Regarding Workflow Error and Notification problem

    Hi,
       I am working on Workflow. I imported data <b>first time</b> in Data Manager and created <b>new</b> workflow. Now while "Launching" this workflow it is showing error "<b>The record is currently used in workflow</b>".
    I was using this repository for other data with different workflow but i deleted all previous data and workflow. Why it is showing this error? When i have new set of data with new workflow than i think i should not show this error.
    Other Question is regarding <b>Notification</b>:
    To notify the person we have to make following changes :
    1) Have to use Notify stencil and have to give e mail ids in User detail
    2) In my server ini file i have to give my mail server name.
    After making this changes I am not getting any mails. Please guide me for the same.
    Please guide me how to rectify this error and what are the prerequisites?
    Thanks in advance,
    Ronak

    Hi Ronak,
    Couple of issues with emailing:
    1.  You need to restart your repository after updating .ini file to effect the changes.
    2.  Your SMTP server should relay mails without SMTP authentication.
    3.  You can also send emails to outside domains such as yahoo or others if your SMTP server permits.
    Check with your mail server administrator and perform a simple SMTP telnet test to make sure your SMTP server is not an issue.
    Hope this helps
    Venkat

  • Regarding workflow suspension(entry in table SWP_SUSPEN)

    Hi Experts,
    I have a workflow whose one of the workitem goes into enqueue error during it's processing when user tries to perform some parallel activity , now when user stops the parallel activity & come back to his inbox, it allows him to process the workitem properly. (That is workitem is successfully processed.....status is  completed). But after this workitem execution, the workflow hangs / gets suspended. Step histroy of this workitem shows there was an error when processing this workitem (Enqueue error) even though finally  user was able to continuue & process the workitem successfully & status is completed too. It creates an entry in table SWP_SUSPEN With workflow Workitem ID & workitem id of the workitem under this workflow & error type as "0001" i.e:- Enqueue error callback to workflow)  & status of the workflow as "1" ...i.e: - "In Process  " & not in error.
    I also analyzed that once the entry in the table SWP_SUSPEN is removed or gets deleted, the workflow continues from the point where it stucked.
    So what i wanted to know is, what this entry in SWP_SUSPEN means by indicating "Error type" as 0001 & Status as "1" . & how this entry gets deleted, i thought there is some background JOB RSSWERRE that does this but when i checked i found RSSWERRE only checks for items in SWP_SUSPEN with workflow statuses as "02" i.e:- In error. where as my workflow has status "1" in SWP_SUSPEN under status field (as mentioned above)which means "In Process"  I also found that this entry is getting deleted after sometime, so there must be some background job that is doing it, so i wanted to know what is that background Job if not RSSWERRE.
    Regards,
    Chetan.

    Hi,
    This is what i got from one of the Notes:
    ou use parallel processing where you have a fork with 2 branches (1
    Branch necessary for completion). In one branch is a dialog activity
    step and in the other is a 'Wait for Event' step. While the dialog
    step is being executed by a user the Wait for Event step receives its
    event and continues along the branch and completes the fork (Remember
    only 1 branch needed for completion). Once the end of fork is reached
    the dialog work item should be set to status Logically Deleted but
    this does not occur due to the lock/enqueue on the work item while the
    user is executing it. Since a callback is essential for a workflow to
    continue running, this callback is suspended (stored in the SWP_SUSPEN
    table). These callbacks are started again via the RSWWERRE report. If
    you have not scheduled report RSWWERRE then the work items will remain
    in table SWP_SUSPEN and the work items will not receive their callback
    and will therefor will not continue.
    If there are examples of work items hanging then check table SWP_SUSPEN to
    see if the callback work item ID is there. If it is then make sure you have
    the RSWWERRE job running in order to redeliver it. If RSWWERRE is running
    and the entry is not being delivered then please check for notes using the
    search term "RSWWERRE" and "SWP_SUSPEN". If there is no entry in
    SWP_SUSPEN, then check the workflow definition to see if the work item is
    asynchronous i.e. needs a terminating event as in Example 1 above. Check
    the event queue via transaction SWEQADM to see if the terminating event is
    being buffered there. If it is then it should automatically be redelivered
    so do a notes search in relation to the event queue.
    Regards
    Gautam
    Edited by: gautam maini on Aug 3, 2011 4:16 PM

  • REGARDING WORKFLOW SETTINGS FOR ELM

    HI FRIENDS,
    I URGENTLY NEED TO KNOW WHAT ARE THE WORKFLOW SETTINGS REQUIRED TO MAKE ELM WORK. I HAVE DEFINED THE TASK WS14000029 AS 'GENERAL TASK' IN T-CODE 'OOCU' BUT NOW I AM GETTING DUMPS WHEN I TRY TO SAVE THE LIST . THE ERROR ANALYSIS IS GIVEN BELOW.
    Error analysis
        Short text of error message:
        Unable to read RFC destination WORKFLOW_LOCAL_010
        Long text of error message:
        Technical information about the message:
        Message class....... "SWF_RUN"
        Number.............. 617
        Variable 1.......... "WORKFLOW_LOCAL_010"
        Variable 2.......... "RFC_READ_DESTINATION_TYPE"
        Variable 3.......... "DESTINATION_NOT_EXIST"
        Variable 4.......... " "
    PLEASE HELP,
    THANKS,
    JAI

    hi
    you need not change the settings of the ELM workflow
    you just need to activate it and plcae it as general
    regarding you error
    RFC destination WORKFLOW_LOCAL_010
    just ask your basis guy to maintain this destination in SWU3
    your dump will be resolved
    see these are standard worflows ,you need not change the settings in normal circumstances
    best regards
    ashish

  • Regarding workflow settings

    hi all
    i have a simple query that i have created a workflow in sandbox and since a workbench request is generated so workflow is reflecting in other client
    please tell me if i have to show the same workflow in production client do i need to do all the changes in that client like maintainence of table entries which i have used in my rules and methods i have created for the workflow.
    for activating the workflow and event linking etc. all these changes will be maintained in production client itself or there is some other way else.
    regards
    ashish

    hi
    you need not change the settings of the ELM workflow
    you just need to activate it and plcae it as general
    regarding you error
    RFC destination WORKFLOW_LOCAL_010
    just ask your basis guy to maintain this destination in SWU3
    your dump will be resolved
    see these are standard worflows ,you need not change the settings in normal circumstances
    best regards
    ashish

  • Regarding Workflow triggering event.

    Hi,
    Description: I have created a Object type and a event for the same by transaction SWO1, after that i have created a WorkFlow(WF) for which the triggering event is the event i have created in the Object Type. There is a report in which i have used the FM "SWE_EVENT_CREATE" and passed the Object Type, Event Name, Key field values and the creator.
    Problem: When i am executing this report the FM is called and the sy-subrc after call is 0, stating that the call was succesfull, but the WF is not getting triggered when i went to transaction SWI2_FREQ to check this WF is not at all triggered. But when i tested from WF transaction SWDD it is working fine.
    Could anyone please explain me on this. or is there any other way to use an event of a Object Type to trigger WF.
    Thanks and Regards,
    Raghavendra Goutham P.

    hi gauthum,
    try this chks.
    Workflow Trace On/Off - SWU8
    Display              - SWU9
    Delete              - SWU10.
    Work Item Analysis    - SWI1
    Identifying workflow for the work Item :
    Tx : SWI1 - Enter the workiem id which has been identified in workflow log
           The details consists of workflow of the workitem.     
    WorkFlow Errors :
    1. Workflow Not Started           - Using Event Trace we can Identify
    2. Started but No Proceeded           - Wrong Object Keys
    3. Problem in Work Item Execution
         Dialog Work Item          - Agent Determinaion Error ( Position,Role,User )
                             - Role Resolution Error
                               Reqd Element would no be
                               Set in Binding
         Background Work Item      - Make Foreground and Test once Sucessfull make it Back round
    rgds
    nver
    if hlped mark points

  • Sales Agreement workflow errored on 3205: is not a valid role or user name.

    Hi experts,
    We're currently on EBS R12.1.2 We're running into an issue that seems like a very general issue that other businesses would have encountered before. We have a business user who creates most of sales agreements. When this business user left the company, we set active end date on the particular userid. Now, when we go into these sales agreements originally created by this particular userid, and put in the expiration date to expire these sales agreement. We're seeing the sales agreement workflow erroring out in the pre-notification workflow email with error 3205: is not a valid role or user name.
    It seems to be this is a very typical business scenario. If you have encountered this problem, please share how you resolved this issue within your oracle apps environment.
    Thank you in advance for your help,
    Jennifer

    Hello,
    We have the same problem in 11.5.10.2. If we want use this blanket sales agreement I have to skipped this notification by sysadmin and after this I can extend end date and another user can use this BSA.
    Look at Extend The Expiration Date For Closed Non-Active Expired BSA Blanket Sales Agreement [ID 1394888.1]     
    Regards,
    Luko

  • Modifying workflow error message

    Dear all,
    i have a requirement where i need to modify the workflow error and i need to enter additional information like customer number and customer purchase order number in workflow error message and error description during inbound Idoc processing.
    can anybody explain me how it can be achieved?
    thanking you in anticipation
    Ashvin Patel
    Edited by: Ashvin Patel on Dec 25, 2008 8:09 AM

    Dear Krupa,
    Thnx for the reply, but can you pls elaborate it. as i need to write a FS for this but i don't know how to put this in technical terms.
    Regards
    Ashvin Patel

  • Error Logging and notifying users regarding the errors

    Hi..
    we are designing a workflow in which if any user comes across an error (at any branch or while executing an action) must be alerted with the error and must send a notification to the admin that the process has stalled at that particular part of the workflow due to some error.
    my doubts are
    1.how can we notify the admin and the initiator of the workflow regarding the error a particular user gets.i saw in adminui that there are two tabs for the admin to view the stalled actions/stalled branches.but the admin and the user needs to be notified with an alert or email that a particular action has been stalled.
    i think i conveyed my problem in a correct manner.if its confusing then plz tell me coz i am already confused in this..

    Thank you sir for your immediate response of the query.
    In the workflow which we are designing,a service request from filled by the user will be routed to the particular approver and he inturn will approve/reject the form accordingly.once he approves,the form is routed to the service provider who will fulfill the service requested and approved.
    1.Now,for instance suppose that the workflow gets stalled while the form is with the approver.my question is how to notify the user that the service he requested is delayed due to the stalling of the process in between as well as the admin alerting him with the error which stalled the workflow process.
    2.you said that it is easy to setup an email address within the adminui..but i dont know how to do that as i am a beginner.
    3.Also u asked me to specify the errors for which we need to send alerts and email notifications...whatever error that occurs whenever the workflow gets staleld needs to be notified both to the user and the admin (as per our requirements).it would be helpful to us if u give a solution for this.
    thank you..
    Raghava Kumar V.S.S.

  • Workflow error in ChaRM using Group Approval

    Hi,
    I am using the Group Approval in ChaRM's requests for change transactions, as explained in detail in Michael Vollmer's blogpostNew ChaRM Feature with SP 10: Enhanced Approval Procedure Functions
    I am also using the workflow crm_rfc_aprv (WS17100016), which sends out workflow tasks during the approval procedure.
    Since I have assigned organizational units to my approval procedure, I always receive an e-mail from the Workflow User with title "Workflow 12345 set to status ERROR" for every ticket.
    This is because somewhere in the code behind the workflow, a user is searched based on the business partner in the approval step. But an Organizational Unit is never linked to a user, you cannot assign the BP Role "employee" to an organizational unit.
    It would be nice if the workflow could send workflow tasks to all the users assigned in the organizational model to the organizational unit. But currently, I am most concerned with getting rid of the workflow error e-mails. I really don't want to get an e-mail for each and every ticket.
    Does anyone know if there is a way to solve this? Maybe some way to link an organizational unit to a (dummy) user anyway?

    Hi Karthik,
    Yes, my organizational model is maintained.
    There are three BP's + Users assigned to the organizational unit.
    The SP10 Enhanced Approval Procedure completely works, those three users are able to set the approval for the "Center of Competence" organizational unit to "approved" in the RfC ticket.
    However, the workflow behind it never goes looking in the organizational model. It just sees "business partner 632", and checks only the data of BP 632, and doesn't find a user on it. So the workflow goes into error, and sends a mail about it to me...
    For approval step 1 everything goes as normal, there is a specific person assigned to the step, the workflow finds a user on the person's business partner, and sends a workflow task / mail to that user.
    Below are screenshots of tx PPOMA_CRM, the approval block in the RfC ticket, and the correct and error mail as seen in the tx SOST list.
    Kind regards,
    Joyca

  • SRM Workflow error-  Error' 9' when calling service ' SO_OBJECT_SEND'

    Hi Team,
    We are facing problem with SAP SRM Workflow error-  Error' 9' when calling service ' SO_OBJECT_SEND' .
    Due to this WI is not going to Approver/Requester INBOX and unable to process that WI.
    Please advice .
    Greatly Appreciated for Help.
    Regards
    CK

    Hi,
    Not sure what '9' is, the exceptions called by the SO_OBJECT_SEND function are as follows:
    EXCEPTIONS
                   ACTIVE_USER_NOT_EXIST      = 35
                   COMMUNICATION_FAILURE      = 71
                   COMPONENT_NOT_AVAILABLE    = 01
                   FOLDER_NOT_EXIST           = 06
                   FOLDER_NO_AUTHORIZATION    = 05
                   FORWARDER_NOT_EXIST        = 08
                   NOTE_NOT_EXIST             = 45
                   OBJECT_NOT_EXIST           = 13
                   OBJECT_NOT_SENT            = 15
                   OBJECT_NO_AUTHORIZATION    = 13
                   OBJECT_TYPE_NOT_EXIST      = 17
                   OPERATION_NO_AUTHORIZATION = 21
                   OWNER_NOT_EXIST            = 22
                   PARAMETER_ERROR            = 23
                   SUBSTITUTE_NOT_ACTIVE      = 31
                   SUBSTITUTE_NOT_DEFINED     = 32
                   SYSTEM_FAILURE             = 72
                   TOO_MUCH_RECEIVERS         = 73
                   USER_NOT_EXIST             = 46
                   OTHERS                     = 1000.
    Regards,
    Jason

  • Three State Approval Workflow Error

    I have created one Task List. Add Three state approval workflow to it.
    When i created New Task. It started workflow. But after couple of minutes it throws error "Error Occured". How to find error.
    Please let me know. If you know any resolution for workflow error then also let me know.
    Thanks in advance.

    Hi,
    Please go to the task list settings page, click Assigned to column and check "No" for "Allow multiple selections", then check whether the issue still exists or not.
    Here are two threads for your reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9231b505-7e78-4e98-b6c0-02ad85b247c3/error-occured-three-state-workflow-multiple-selection?forum=sharepointcustomizationlegacy
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a9f37ea-40b4-494b-b4af-db15be9d91ff/error-occured-three-state-workflow?forum=sharepointgenerallegacy
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • General Workflow is receiving multiple workflow errors

    Dear Team,
    i have working in production system facing problem with workflow.
    General Workflow is receiving multiple workflow errors
    Resulting in confusion for business users to resolve.
    Old Workflow errors that have been resolved appear to have been resent and sent to the wrong people.  Claims Workflow messages are being sent to Customer Service, etc.  only thing is we know the user who had changed.
    please guide me how to achive this problem?

    Hello,
    How are emails being sent to users about errors in already processed workflows?
    Not by the workflows, they've already been completed. Do you have a custom job running periodically that looks for errors?
    Check SM37. Also make sure these mails aren't coming from a Test system.
    Could you give an example of one of these mails.
    When you find the solution to your problem, please post it here.
    regards
    Rick Bakker
    hanabi technology

  • Workflow Error - ROLLBACK WORK executed (SWP_CALLBACK_WI_DONE item 8)

    Hi Workflow Experts,
    I need help regarding a workflow error I encountered during a workflow run, the error is as follows:
    when I click the "red" traffic light right besides the broken box a pop up of the error log shows:
    "object does not exist
    ROLLBACK WORK executed (SWP_CALLBACK_WI_DONE item 8)
    object does not exist
    object does not exist
    object does not exist
    ROLLBACK WORK executed (SWP_CONTINUE_WITH_NEXT_NODES item 1)"
    when I click the drop down arrow, the following error log shows:
    WF Manager                SWP_CALLBACK_WI_DONE
    WF Manager                SWP_CALLBACK_WI_DONE
    WF Manager                SWP_CALLBACK_WI_DONE
    Workflow-System           SWP_CALLBACK_WI_DONE
    Workflow-System           SWP_CALLBACK_WI_DONE
    WF Manager                SWP_CALLBACK_WI_DONE
    Workflow-System           SWW_WI_STATUS_CHANGE
    Are any of you familiar with this error? or even encounter them? WHen I restarted the workflow in error using SWPR (restart workflow after error), the workflow continues and status is in process...
    Please let me know if you have any idea on how to solve this issue or if there are anyone who have solve similar issues like this. Please help me, I am running out of options.
    Thanks in advance!
    Manny

    Hello,
    Does the error message give any more information? What sort of step does it happen at?
    Did it also happen in the last run of that workflow? If not, compare the contents of the containers, one of the elements may be missing a value.
    regards
    Rick Bakker
    Hanabi Technology

  • Workflow Issue - Delivery address XML Reference workflow - Error

    Hello All,
    I am an ABAP developer, with very limited knowledge in Workflow, and I am stuck with an ongoing issue for quite sometime. We have a scenario where we need to a workflow triggers for a specific UNDATED sales order lines (identified by values in VBAP-Zfield ) in R/3 box, and it carries an XML request (probably mails it) to a SAP CRM destination, which would now update some CRM tables and generate a Call list in the SAP CRM box. This is one flow that used to be fine, but has stopped working since the past few months may because of some change, which is not yet identified. as multiple projects are working on the same boxes.
    To elaborate -
    1 - We have a SALESORDER_CREATEFROMDAT2 Idoc creating the SO, where in, based on a CUTOFF date condition, (if it is in the past), a VBAP-ZFIELD for the corresponding line is set to a value (08).
    2 - This event is expected to trigger a workflow for the Undated order/Delivery resolution , which would then create an XML doc for the SO and send this across to CRM box
    3 -This will then update a Ztable. This will be handled by a batch job in CRM to generate a call list.
    Now we are facing a problem in the second step here, where in the activity - 'BCKGRD: Create XML_DOC for SO: xxxxxxxx' is completing successfully, but having a failure in the next step  - 'Delivery address XML Reference workflow - ERROR'
    This is how the detailed workflow log looks -
    WF-BATCH                  Web work item created                               03.04.2014 08:12:29
    WF-BATCH                  Execution started automatically                   03.04.2014 08:12:29
    WF-BATCH                  CL_SWF_RUN_ALERT_ERROR                   03.04.2014 08:12:31
    WF-BATCH                    IF_SWF_UTL_MAIL~SEND                      03.04.2014 08:12:31
    WF-BATCH                  SWW_RI_EXECUTE_S                            03.04.2014 08:12:31
    WF-BATCH                    SWW_RI_EXECUTE_S                           03.04.2014 08:12:31
    WF-BATCH                  Execution started automatically                      03.04.2014 08:12:31
    WFXML                     START_EXECUTION_IN_BACKGROUND            04.04.2014 04:00:35
    WF-BATCH                  Execution started                                          04.04.2014 04:00:36
    WF-BATCH                  CL_SWF_RUN_ALERT_ERROR                   04.04.2014 04:00:44
    WF-BATCH                    IF_SWF_UTL_MAIL~SEND                   04.04.2014 04:00:44
    WF-BATCH                  Execution started                                     04.04.2014 04:00:45
    WF-BATCH                    SWW_RI_EXECUTE_S                       04.04.2014 04:00:45
    I've also attached a screenshot for the errors, if that gives a clue.
    Request all the workflow experts to help me with a solution, or an approach towards a fix.
    Thanks & Regards,
    S Sen.

    Hi S Sen,
    Agree with Ronen....no mail recipient or from 10 records of mail recipient - one record is empty.
    Try to find out the intended email recipients....any data change there might have resulted in errors since few months. Maybe, some position got vacant, some config table to get the recipients got changed.....
    regards,
    Modak

Maybe you are looking for