Remove SCVMM2012 Integration in SCOM 2012

Hi @all
i had a SCOM 2012 - SCVMM 2012 integration ... and now i re-installed the SCVMM Server with Windows Server 2012 and SCVMM 2012 SP1 ... i thought everything´s fine .. but now i noticed, that system discovery in SCOM 2012 does not work .. and i guess that
is caused by the old SCVMM Integration ...
how can i remove an obsolete scvmm 2012 integration on SCOM 2012 Server ? ...

Hi
Before removing the old VMM server, you really needed to go into Settings and System Center Integrations and remove the SCOM integration. That would have removed the conectors from SCOM as well.
Do you still see all the old VMM Connectors in SCOM?
In VMM, have you tried reconfiguring the SCOM integration? Do you see a green tick or red cross? If not, then try re-adding to see if the new integration will work. You'll also need to upgrade Management Packs in SCOM.
Regards
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

Similar Messages

OEM integration with SCOM 2012

Hi,
Can anyone help me out on the topic- OEM integration with SCOM 2012.

Are you refer to this document
Oracle® Enterprise Manager Installation and Configuration Guide for Microsoft System Center Operations Manager Connector
http://docs.oracle.com/cd/E24628_01/install.121/e28572.pdf
Roger

EM 12C Integration with SCOM 2012

Hi
Has anyone integrated EM12C ( running on Solaris Sparc ) with MS SCOM 2012 ? Just looking for any hints / tips /issues ... etc ...
Any thoughts appreciated.
Regards
Rob

If the integration is along the lines of forwarding events from Enterprise Manager 12c to SCOM, then we are currently finalizing an event connector for SCOM 2012. It will enable the sending of events from Enterprise Manager to SCOM.
Regards,
Ana

SCCM 2012 integration with SCOM 2012 - Disable Alerts during patching

Have SCCM 2012 R2 and SCOM 2012 R2 and use the Software Update Patching process for servers. When using the checkbox to "Disable Operations Manager Alerts when this program runs" option have noticed on completion of the job and the target
server is rebooted, a scheduled task appears for a short time titled "SCOM 2007 Agent Resume Task". The task disappears and there is no history to view.
Is this a legacy naming convention from 2007 world when the maintenance mode is turned off from the SCCM patching process?
How do I see the actual code behind the SCCM and SCOM integration with Maintenance mode to validate it.

SCCM should use the following SCOM SDK to do that.
http://msdn.microsoft.com/en-us/library/bb437532.aspx
That's incorrect. There is no API or method to put an OpsMgr agent into maintenance mode on the client itself -- maintenance mode is a centrally controlled feature of OpsMgr. The API/code sample you linked is performing that activity on the management server
which assumes you know the management server name and have permissions to carry out the action -- neither of which is fulfilled by the ConfigMgr agent.
The ConfigMgr agent pauses the OpsMgr client agent service and also unloads the workflows from the OpsMgr agent (it only did the first part in ConfigMgr 2007). This effectively puts the agent in Maintenance Mode (although to my knowledge this is not directly
reflected in the OpsMgr console).
Jason | http://blog.configmgrftw.com

Recommendations for SCOM 2012 -- 2012 R2 migration

Hello to all. I have a customer that has SCOM 2012 in its IT environment but uses it barely and does not have any documentation. I proposed to install a new Manament Group (MG) and "reboot" to a paralell SCOM 2012 R2 considering the
use of new features present on 2012 R2.
Questions:
1- Does SCOM support a side by side migration strategy , like SCCM 2007 R2 --> SCCM 2012 R2 that takes its main source objects and bring them to the new separated Management Group (the SCOM 2012 R2)?
2- Considering that all regular member servers are monitored by SCOM 2012 (all have agents installed), what is the recommended way to to install SCOM 2012 R2 agents on them (multi homed deploy, deploy a new agent and it will upgrade/remove the
already existing SCOM 2012, etc)?
3- Does SCOM allows a approach to install a SCOM 2012 R2 on already existing SCOM 2012 MG and "migrate" its objects to new server and after that decomission SCOM 2012 (the old version)?
Your inputs and references will be very welecomed.
Regards, EEOC.

1- Does SCOM support a side by side migration strategy , like SCCM 2007 R2 --> SCCM 2012 R2 that takes its main source objects and bring them to the new separated Management Group (the SCOM 2012 R2)?
2- Considering that all regular member servers are monitored by SCOM 2012 (all have agents installed), what is the recommended way to to install SCOM 2012 R2 agents on them (multi homed deploy, deploy a new agent and it will upgrade/remove the
already existing SCOM 2012, etc)?
Yes. You can built SCOM 2012 R2 and do side-by-side migration.
High Level View of System Center 2012 R2 Operations Manager Upgrade Steps – Upgrading 2012 SP1 Agents to 2012 R2 and Running Two Environments:
1. Retain the original System Center 2012 Service Pack 1 (SP1), Operations Manager environment.
2. Set up an additional, new System Center 2012 R2 Operations Manager environment with management servers, gateway, Operations Manager Database, Operations Manager Data Warehouse, console, web console, and reporting server.
3. Upgrade the System Center 2012 Service Pack 1 (SP1), Operations Manager Agents to 2012 R2.
a. Push-Install option
b. Manual / Command Line option
3- Does SCOM allows a approach to install a SCOM 2012 R2 on already existing SCOM 2012 MG and "migrate" its objects to new server and after that decomission SCOM 2012 (the old version)?
The upgrade path is from SCOM 2012 --> SCOM 2012 SP1 --> SCOM 2012 R2
High Level View of System Center 2012 R2 Operations Manager Upgrade Steps – Upgrading a Distributed Management Group
1. Accomplish Pre-Upgrade Tasks
2. Upgrade the initial management server and then additional management servers (each management server must be upgraded)
3. Upgrade ACS (because the ACS server must be on same machine as a management server, we recommend you perform this step along with the upgrade of the management server on which ACS resides.)
4. Upgrade Gateway(s)
5. Upgrade Console
6. Push Install to Agent(s) / Upgrading Manually Installed Agents
7. Upgrade Web Console
8. Upgrade Reporting Server
9. Accomplish Post-Upgrade Tasks
For detail, pls. refer to
Upgrading System Center 2012 – Operations Manager to System Center 2012 SP1
https://technet.microsoft.com/en-us/library/jj899854.aspx
Upgrading System Center 2012 SP1 - Operations Manager to System Center 2012 R2
https://technet.microsoft.com/en-us/library/dn249707.aspx
Roger

AD Integration: 1 Forest containing 2 Domains - Run Accounts/Profiles (SCOM 2012)

I know there are plenty of threads on AD integration & Run As accounts\Profiles, but none quite answering my scenario...so here goes.
1 Forest containing 2 domains -
abc.com and
def.com.
abc.comcontains SCOM 2012 infrastructure (Mgmt Servers (MS1, MS2), Ops DB, Reporting DWDB).
abc.com
1. Created SCOM Admins
Global Security group
2. Created SCOM_MS_Action
domain user account (used during SCOM setup & also Local Admin on all
abc.com machines via Action Account AD group/GPO)
3. Ran MomADAdmin.exe DEV-OPSMGR12 "abc\SCOM Admins" abc\SCOM_MS_Action abc.com
(SCOM_MS_Action
added to SCOM Admins group as a result)
4. Created Auto Agent Assign
rule for abc.com
against MS1 for "servers", Run As Profile left as
default setting.
RESULT: All servers in abc.com
populated MS_PrimarySG_xxx
group as expected.
def.com
5. Created SCOM Admins
Global Security group
6. Created SCOM_AD_Assign
domain user account
7. Ran MomADAdmin.exe DEV-OPSMGR12 "def\SCOM Admins" def\SCOM_AD_Assign def.com
(SCOM_AD_Assign added to
SCOM Admins group as a result)
8. Created Run As Account (Windows) "def\SCOM_AD_Assign"
Do I need to create this?
9. Set "def\SCOM_AD_Assign"
Run As account to "More Secure"
Is"More Secure" correct, otherwise "Less Secure" causes errors on abc.com clients?
10. Created Run As Profile "def AD Agent Discovery" & assigned to
Default Management Pack
Do I need to create a new Run As Profile?
Was this the correct MP as when creating a new MP I got errors about it being unsealed when assigning to new Auto Agent Assign
rule? I was under the impression never to use the Default MP?
11. Associated "def\SCOM_AD_Assign" Run As account to "def AD Agent Discovery"
Run As Profile, targetting "All Objects"
Is this correct?
12. Created Auto Agent Assign
rule for def.com
against MS1 for "servers", Run As Profile changed to "def AD Agent Discovery."
RESULT: def.com contains OperationsManagement\DEV-OPSMGR12
container but no MS_PrimarySG_xxx
group exists?
Do I need to add my Run As account to the "Active Directory Based Agent Assignment Account" Run As Profile as well as/instead of creating a Run As Profile? - and if so, do I target All Objects, Class, Group,
Object?
Thanks in advance - I find these Run As accounts very confusing when it comes to multiple domains!

OK, solved this one myself. To answer my own questions :) this is what needed to be done (whether it's entirely correct or not is up for debate, however I ended up with the result I was after, so I am happy for now):
def.com
5. Created SCOM Admins
Global Security group
6. Created SCOM_AD_Assign
domain user account
7. Ran MomADAdmin.exe DEV-OPSMGR12 "def\SCOM Admins" def\SCOM_AD_Assign def.com
(SCOM_AD_Assign added toSCOM Admins group as a result)
8. Created Run As Account (Windows) "def\SCOM_AD_Assign"
Do I need to create this?
YES
9. Set "def\SCOM_AD_Assign"Run As account to
"More Secure"
Is "More Secure" correct, otherwise "Less Secure" causes errors on abc.com clients?
YES, and added the Management Servers as "...the computers to which the credentials will be distributed"
10. Created Run As Profile "def AD Agent Discovery" & assigned to
Default Management Pack
Do I need to create a new Run As Profile?
YES
Was this the correct MP as when creating a new MP I got errors about it being unsealed when assigning to new Auto Agent Assign rule? I was under the impression
never to use the Default MP?
Questionable, I did select the Default MP, otherwise the unsealed error occured when creating the Auto Agent Assign rule
11. Associated "def\SCOM_AD_Assign" Run As account to "def AD Agent Discovery"
Run As Profile, targeting "All Objects"
Is this correct?
NO, instead I targeted the Class "AD Assignment Resource Pool"
12. Created Auto Agent Assign
rule for def.com
against MS1 for "servers", Run As Profile changed to "def AD Agent Discovery."
Do I need to add my Run As account to the "Active Directory Based Agent Assignment Account" Run As Profile as well as/instead of creating a Run As Profile? - and if so, do I target All Objects, Class, Group, Object?
NO, otherwise alerts appear in regards to abc.com discovery rules breaking. Looks like for additional domains this rule should not be touched.
RESULT: All servers in def.com
populated MS_PrimarySG_xxx
group as expected
Note: Domain Controllers should not be included in the Auto Assign rules supposedly (makes sense) so I altered the query to ensure they didn't populate in the
MS_PrimarySG_xxx group:
(&(sAMAccountType=805306369)(objectCategory=computer)(objectClass=computer)(operatingSystem=*Server*)) (!(primaryGroupID=516))
(!(primaryGroupID=516)) equates to exclude DCs.
Hope this helps others
Steve

SCVMM and SCOM 2012 Integration Issues

Hello, I have integrated SCOM 2012 RTM and SCVMM 2012 RTM and am having lots of issues that were not present with 2007/2008 family integration. For starters, my SCOM environment manages multiple untrusted domains, etc. When enabling VMM integration
I now get hundreds of alerts about "Unable to verify Run As Account", stating that is cannot login as the VMM service account for all clients that don't live in same domain as SCVMM server. For starters why do my physical servers, and all VMs need
to be distributed with this account? The alert is also expected logically, because this is impossible to distribute a Run As account to every agent in a multi-domain untrusted environment. Also according to this configuration, the Virtual
Machine Manager Connection Account created in SCOM is set to less secure (distributed to all agents), which is why the alert is coming up; additionally less secure setting is typically bad practice. Why does SCVMM do this by default? Can it be
changed? What are options here? It seems to me only the SCOM management server should need this Run As account, not every agent? Thoughts on this? Thanks!

I'm running SCVMM 2012 R2 and OpsMgr 2012 R2. I have the integration setup and have had the same issue with the RunAs account logging on to workgroup computers.
I tried changing the account distribution to More secure and only targeting my two management servers and the VMM server. I also changed the profile so that it targeted only the Windows Computer object for the same three servers. I came in this
morning and I do not have the "Run As Account Could Not Log On" message anymore on the workgroup computer, but now I have an alert "VMM Agent Not Monitored By Operations Manager" for the VMM server. I look at the Health Explorer and see that the agent
is reachable but its not being monitored.
I tried changing the RunAs profile back to "All Targeted Objects" but monitoring still didn't restart. Then I tried restarting the OpsMgr agent and then the VMM agent, but still the status did not change. Now, I have just set the account back
to Less secure and have again received the warning from the workgroup computer about not being able to log on. I'll wait a little longer to see if the VMM server begins to be managed.
Any experience with this?

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

Error 1723 when removing scom 2012 sp1 agent

Hi All,
I am trying to remove the scom 2012 SP1 agent from a machine and i get an error - 'Error 1723. There is a problem
with this Windows Installer package. A DLL required for this install to complete could not be run.
Any idea how can i remove the agent from the box. Let me now if any other info required to give a hint to the problem.
Durgesh Kumar

Hi,
Reinstall the agent, and the uninstall ? If possible, reboot the server and then uninstall?
Same issue here:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/get-error-1723-there-is-a-problem-with-windows/3d68fc4b-c968-4796-a270-27027a52de3f?page=2
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SCOM 2012 SP1 - SCVMM 2012 SP1 Integration

Hi All,
I need to integrate SCOM 2012 SP1 (without UR)with SCVMM 2012 SP1(without UR).
Is Update Rollup required for this integration as a prerequisites? or We can directly proceed with Integration without update Rollup. Please advice.
Can we get performance date of virtual machine by integration scom with scvmm?
Thanks and Regards
Karthick M

Hi,
To monitor virtual machines in VMM, we should integrate VMM with SCOM, please go through the article below:
How to Connect VMM with Operations Manager
https://technet.microsoft.com/en-us/library/hh882396.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error 10218 while integrating scom 2012 r2 with scvmm 2012 r2

hello,
We are working to integrate the SCOM 2012 R2 With SCVMM 2012 R2 .But while creating connection of integration it got failed with error in job on scvmm as below :
Error (10218)
Setup could not import the System Center Virtual Machine Manager Management Pack into Operations Manager server because one or more required management packs are missing. The VMM Management Packs cannot be deployed unless the following component management
packs are present in Operations Manager :
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
Recommended Action
To provide the missing component management packs, ensure that the following management packs have been imported into Operations Manager server:
Microsoft Windows Server 2003 Internet Information Services Management Pack for OpsMgr 2012 (version 6.0.6278.0 or later)
Microsoft SQL Server 2005 Management Pack(version 6.0.5000.0 or later)
You can download the management packs from the System Center Operations Manager Catalog at http://go.microsoft.com/fwlink/?LinkId=86411
Reference link used :- http://technet.microsoft.com/en-us/library/hh882396.aspx ,We have imported all the required MPs as mention in above link on scom.
Regards
Richa KM

Have you imported all of the packs it mentions:
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
There's a good walkthrough
here which details all the pre-reqs.
It was some time ago but i also did a walk-through with pictures
http://myopsmgrblog.wordpress.com/2013/04/23/scom-integration-with-scvmm/
Hope this helps

SCOM 2012 CA Wily Introscope Integration

Hello,
I want to integrate CA Wily Introscope into our SCOM 2012 environment. There is an Integration xml (CAWily.Introscope.Integration.xml) which I can include as management pack into SCOM. After this I see 4 charts but no information in it. SCOM agent
is running on Introscope MOM Servers and Collectors and the Intrscope discovery function is active at SCOM. It seems to me that the discovery can not find the Introscope servers.
Is there anything to activate on Introscope?
Has anybody experience with this integration?
Regards, Doreen

Hi,
Do you mean that you want to use SCOM to moitor Introscope server? Do you have the corresponding management pack imported to the management group?
Based on my research, CA Wily Introscope is also a monitoring tool. If you are looking for ways to combine both the two monitoring tools together, I have to say that it may not be supported. As they are totally different and I am not familar with CA
Wily Introscope, please also post on the vendor forum to get more support.
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 Powershell command to remove agent

Hello,
Has anyone had any luck removing agents via Powershell to mimic the delete agent from the console?
Blogs don't turn up anything useful for this task.
The 2012 Powershell covers how to approve agents, add proxy flag, and uninstall agent, but nothing to remove. Used the SQL stored procedure previously in 2007R2 (and same procedure exists in 2012 SP1.
Anyone aware of Powershell automate agent removal?
Thanks!
SCOM Power Shell to add SCOM 2012 agent
Get-SCOMPendingManagement | where {$_.AgentName -eq "ServernameFQDN"} | Approve-SCOMPendingManagement
Enable Proxy on newly added agent
Get-ScomAgent | where-object {$_.DisplayName -like "okcnmo*"} | where-object {$_.ProxyingEnabled.Value -eq $False} | Enable-SCOMAgentProxy
SQL Query to remove
http://social.technet.microsoft.com/Forums/en-US/operationsmanagergeneral/thread/e413c030-509b-45e4-bcd4-b4ae1a649c73
Uninstall Agent
http://technet.microsoft.com/library/hh545186.aspx
Remove Unix agents
http://social.technet.microsoft.com/Forums/en-US/operationsmanagerunixandlinux/thread/081f2801-7dfa-4db9-8c78-6adbc487a031/

We actually have used the stored procedure for 2007 and 2012
OperationsManager.dbo.p_TypedManagedEntityDelete
If you want to use Invoke-Sqlcmd to run the query.
Another way from SQL which can be put in PowerShell
--Grab GUID for that health service
select * from BaseManagedEntity
where FullName like '%<servername>%'
and IsDeleted = 1
Look for FullName with Microsoft.SystemCenter.HealthService:servername
-- Use this to test the entity delete for the healthservice GUID
DECLARE @EntityId uniqueidentifier;
DECLARE @TimeGenerated datetime;
-- change "GUID" to the ID of the invalid entity
SET @EntityId = '<GUID here>';
SET @TimeGenerated = getutcdate();
BEGIN TRANSACTION
EXEC dbo.p_TypedManagedEntityDelete @EntityId, @TimeGenerated;
COMMIT TRANSACTION
--Check what is in deleted
select * from BaseManagedEntity
where IsDeleted = 1

How to remove network devices through powershell? (scom 2012)

Hi
Could anyone says how to delete network device in SCOM 2012 through powershell?
In 2007 we have Get-RemotelyManagedDevice.
I have a big number network device in monitoring and now need delete some of them with specific filter, all switches.
How to do it?
Thanks
Alex

The devices were discovered by an old Management Server that was reinstalled.
I finally got those devices out of my SCOM environment using this SQL query (just replace networkdevicename):
UPDATE
BaseManagedEntity
SET
isdeleted=1
from
BaseManagedEntity where
BaseManagedEntityId in
(select
BaseManagedEntityId from
BaseManagedEntity where
displayname like
'%networkdevicename%')

SCOM 2012 SP1 Integration with Qlikview

Hi ,
can anyone help me with information on how to integrate SCOM 2012 Sp1 and Qlikview ?
Any pointers or documentation will be greatly appreciated.
Thank you,

Hi,
I recommend you go to Qlik Community to find if there have a solution.
Welcome to Qlik Community
http://community.qlik.com/welcome
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party
contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Remove SCVMM2012 Integration in SCOM 2012

Similar Messages

Maybe you are looking for