Report Errors REP-1051 and REP-1070 when saving

I just created a new report. I'm now getting errors REP-1051 and REP-1070 when I attempt to save the .rdf to my local hard drive (or anywhere else for that matter). Permissions where I try to save it are OK, in fact if I remove the SQL and insert "select * from dual", it saves nicely. Is there a query size limit of which I'm unaware? The SQL runs corrrectly, compiles correctly, etc. I just can't seem to save my work. Thank you in advance.

REP-1051 and REP-1070 What are the messages for these codes?
Which version and OS are you using?
How are you calling your report?

Similar Messages

Parameter Form , REP-1051 and REP-1070

HI
I am trying to write validating functions for text box which will be shown in parameter form when the report will be run on web through URL. I am unable to save the report file after wrting the validating code in before form property of report. Oracle Report Builder raises error with error codes REP-1051 and REP-1070.I have noticed that this error occurs when the toal html content in report exceeds 6.11 kb in size. Any solution ?

May be write some of the information to a table and retrieve from that?
Rajesh Alex

Difference between deploying oracle report in RDF format and REP format

Hi All,
Good Day!!!
We are frequently encountering report failures in our production environment with the error message "REP-1247: There exist uncompiled program unit(s)"
But the report executes successfully in the next try and the issue is intermittant. In production the reports are deployed in RDF format.
So in our test environment we tried of deploying the reports in REP foramat and we cant find any errors.
Is there Difference in deploying oracle report in RDF format and REP format?
Is there any diffence in execution?
Your inputs will be much appreciated!!!
Thanks in Advance,
JK

Hi,
REP is to RDF what FMX is to FMB, MMX is to MMB, etc.
Only difference here is that if you deploy RDF, not REP, then the RDF is compiled at runtime by Reports Engine and then executed. In other words, if REP is deployed then it is straightway execute.
That should explain all your observations.
Cheers.
PS: Please post Oracle Report queries on {forum:id=84} forum.
Edited by: Prabodh on Jul 20, 2012 4:54 PM

HELP: REP-0065 and rep-0200

Has anyone else seen this error.
Env:
Report Builder 6i
Win 2000
I have a simple report with two repeating frames (one embedded). When I query and get data back in a ref cursor I get a rep-0060 and rep-0200 error. I had the report running yesterday and with no changes to the database or the report def, I get this error today.
Thanks.
null

Nevermind. Found the problem. We had another procedure running in the database that was trying to divide by 0.

Call Report with ParamForm=yes and Rep-52007

I have forms and report services 10.2.0.2 installed on my Win2003 server.
Reports runs perfectly with paramform=no but when i use paramform=yes it show html param form but pressing submit query it show The page cannot be displayed page. the same report with paramform=no and hard coding paramter runs perfectly.
This is the procedure i am using after adding hidden_action i start getting REP-52007 instead of the page cannot be displayed.....
PROCEDURE show_report(pRptServer varchar2,pRptObj varchar2,pRptFormat varchar2,pRptPath varchar2,pRptParameter varchar2,pParamForm varchar2) IS
     repid REPORT_OBJECT;
     rep_status varchar2(30);
     v_rep VARCHAR2(100);
     vjob_id varchar2(100);
     v_reportserver varchar2(50):=pRptServer;
     v_runformat varchar2(50):= pRptFormat;
     hidden_action varchar2(1000);
     v_report_other VARCHAR2(4000) :='';
begin
               repid := FIND_REPORT_OBJECT(pRptObj);
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,pRptPath);
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_reportserver);
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,v_runformat);
               --SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,pRptParameter||' paramform='||pParamForm);
               -- code for pfaction
               hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME);
               hidden_action := hidden_action ||'&destype='||GET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE);
               hidden_action := hidden_action ||'&desformat='||GET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT);
               hidden_action := hidden_action ||'&userid=' ||GET_APPLICATION_PROPERTY(username)||'/'||GET_APPLICATION_PROPERTY(password)||'@'||GET_APPLICATION_PROPERTY(connect_string);
               hidden_action := hidden_action ||'&'||v_report_other;
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'pfaction='||hidden_action||' '||pRptParameter||' paramform='||pParamForm);
               v_rep := RUN_REPORT_OBJECT(repid);
               vjob_id := substr(v_rep,length(v_reportserver)+2,length(v_rep));
               rep_status := REPORT_OBJECT_STATUS(v_rep);
               while rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
               loop
                    rep_status := REPORT_OBJECT_STATUS(v_rep);
               end loop;
               if rep_status = 'FINISHED' then
                    WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||vjob_id||'?server='||v_reportserver||'','_blank');
                    message('Finished');
               else
                    message('Error');
               end if;
end;
Edited by: Zahid Rahim on Oct 2, 2009 10:39 AM

but when i use paramform=yes it show html param form but pressing submit query it show The page cannot be displayed page
for Paramform=yes u have to enter values manually.
open the following link.
REP-52007: Parameter form format error
http://www.orafaq.com/forum/t/97088/2/
sarah

REP-0066 AND REP-3335

Hi All,
I got an error when I ran one report
REP-0066:error executing CA utility
REP-3335:Unhandled Internal CA Error.
calaa 1.
I am using Developer 2000/report v2.1.
Your help is highly appreciated!
Thanks,

Even if I run this report from developer 2000, I got same error. (Initially , it ran from another Oracle Form application). The query is little complicated including datalinks so I wasn't so sure how to try default layout. need to retrieve a lot of information. But if you are willing, I can share the code with you. This error is so crucial to my work.
Thanks,
Donghong

DW reporting error line 9 and 10

Hi everything this site www.geekstotherescue.com.au was all
good to go until I input the keywords client sent me. then
Dreamweaver reported error (underlined lines 9 and 10 in red) I can
not figure out what caused this error. i do not have access to IE6
can someone check the site in IE 6 and let me know if it looks ok
and how I can fix the error?
thanks
Shontelle

> 2. Murray: when i hover over the the red underline it
says not suporrted
> in
> IE5.5 and IE 6.
So - there's your answer, then. Open the CSS file and see
what is redlined
there.
> I have heard that kewyords are not very effective
anymore but
> my clients seem to want them in I was taking the "the
having them in
> won't
> hurt approach" but perhaps i am better off just telling
my clients not to
> bother???
It's really up to you, but I do the "not to bother" part.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"shonts" <[email protected]> wrote in
message
news:fcplll$o8q$[email protected]..
> Hi thanks for ypur replies.
> 1. Peter: i should have checked validation before
positng here. I will
> fix
> the errors now. thanks
> 2. Murray: when i hover over the the red underline it
says not suporrted
> in
> IE5.5 and IE 6. I have heard that kewyords are not very
effective anymore
> but
> my clients seem to want them in I was taking the "the
having them in
> won't
> hurt approach" but perhaps i am better off just telling
my clients not to
> bother???
>
> regards,
>
> Shontelle
>

Distiller missing text and image links when saving to pdf

Not sure if anyone has experienced this issue before. Basically I create artwork 1up in indesign CS3 and print as a postscript file "print ready settings" then create a pdf through distiller 8.1.2. After this I then imposition the 1up PDF back into indesign (using the pdf as a link and then step and repeat it) then I print the new imposed artwork as postscript file again and distill it as a PDF ready for offset printing.
Most time this process works like a dream, but every now and then distiller doesn't want to process the file correctly and images and sometimes text have dropped off the final imposed PDF file. It doesnt notify me of any problems when distilling. As you can imagine working in the print industry this is VERY SCARY
As i am using a common 1up pdf link the imposition should be correct, (all the pdf linked images should be the same anyway) Is it a memory issue, or a bug in distiller perhaps.
Im running a Mac with OSX 10.4.11 with 2Gig of RAM.
If you would like to see a sample of the issue let me know.
Any help on this would be awesome.

thanks for the replies,
Working in a pre-press environment we obviously prefer to print from pdf files (as opposed to using supplied native art). As a result I am always receiving pdf files from external clients who have saved their artwork from indesign to pdf format, so Im not sure what the real difference is between me imposing a supplied indesign/pdf files in indesign vs me imposing my own indesign/pdf files in indesign. (aprt from perhaps going through distiller twice)
i can see what your saying though and for years i have been using the cut and paste and step and repeat method but recently changed my workflow for a few reasons
- I noticed that by printing a 1up pdf and relinking the file back into my indesign imposition the final imposed pdf was lower in size
- if a client made a change to the artwork after imposing (which always happens) all i had to do was make the change, resave the pdf 1up link again and update the link and it did it for me and saved me from step and repeating all over again,
- whenever the job was printed again in the future i could use the same procedure, resave as 1up pdf again and update the link.
- plus i knew that if i was using the one link all my step and repeats would be exactly the same each time (and i didn't have to worry that a graphic that hadn't been selected/grouped correctly and would drop off when step and repeating)
.....and for sure it probably is a slightly longer way to impose a job for print but it saves me half the time on the next print run, and i can use my imposition file as a template for similar jobs also.
I have found the workflow i use works fine, apart from these rare hiccups which i can get around by resaving the pdf again anyway, but what Im really worried about is the times this error presents itself and doesn't notify me that a problem has occurred.

Internal Software Error: .\AVTreeNode.cpp, line 25 when saving a project

Hello,
I am trying to work with Encore DVD 2.0 on Windows XP professional (SP 2). Until now with every project I try to make I see new error messages, and my whole work consists of trying to find work arounds.
My actual project consists of five slide shows. They are all between 1 and 2,5 minutes. Except for one, that only consists of a black screen shown for 5 seconds.
I have a playlist that contains all slide shows. Between two of the longer slide shows I inserted the 5 second black screen. What I wanted to achieve with this technique is that I can easily change the "gap" between two slide shows by changing the duration of the black screen slide show once. Alternatively I could have added a black image as the last slide two each of the four slide shows, but then I would have to change the duration of that slide four times when I want to change the gap between the slide shows.
Anyway, I finally tried to create the project which resulted in the CVOBUPlanner.cpp error in line 331.
So I wanted to track down the problem by
- deleting some of the slide shows
- saving the project under another name
- trying to create that project
So first I deleted everything but the first slide show from the playlist. then I deleted all the slide shows but not the first one (and the 5 second black screen though I didn't use it here), from the project. Saved the project under another name and created it without an error.
Then I opened the original project again. Now I deleted everything but the first slide show and the 5 second black screen slide show. Again I deleted the slide shows, but not he first and the 5 second black screen.
I tried to save the project under another name, but now I received an internal software error: .\AVTreeNode.cpp, line 25.
After I restarted the application I was able to open the original movie, delete the slide shows and save the project under another name.
I still wanted to let you now because this is an error message that I have not seen before and didn't find here in this forum.
Regards,
Christian Kirchhoff

There are a couple of other threads about a similar error which seem to point to a possible chapter playlist problem:
Internal Software error ..... When 'preview from here' or Build
Chapter Playlist play order bug?

Error 0xBFF69011 - "Unable to get attribute" when saving current camera settings to file

Hi,
I get an Error 0xBFF69011 - "Unable to get attribute" when attempting to save current camera setting to file with MAX. I was not able to save a single time, hence the settings the camera came with out of the box are still active.
Camera: Basler acA2500-14um
Camera firmware: 106215-05;U;acA2500_14u;V1.0-8;0
Driver: NI-IMAQdx USB3 Vision device
MAX version:5.4
IMAQdx version: 4.2
Does anyone know what causes this error or how I can modify the camera settings and save the modifications to file?
Thank you,
Ferenc

Yes, the 1.0 Basler firmware released after IMAQdx 4.2 exposed this specific problem. This has been addressed in Vision Acquisition September 2013 (13.1) which includes IMAQdx 4.3. There should have been a public KB created for this issue but I do not see it yet...
You can update your installation here:
http://joule.ni.com/nidu/cds/view/p/id/4409/lang/en
Eric

Checking item and line service when saving PO and Contract

Hello people,
my requirement is:
When saving the Purchase Order or the Contract, checking the material group of the item and their line services. They must me equal, otherwise an error message must be raised.
Do you know what User Exit ou BADI must be used?
Thanks a lot!

Hi,
please try to implement additional checks via badi ME_PROCESS_PO_CUST and / or EXIT_SAPLMLSP_030.
Regards,
Edit

What is "Baseline Standard" and "Baseline Optimized" when saving JPEG's?

When saving a JPEG image file in PSE 6 for Mac, I noticed a "Format Options" section of a pop-up window called "JPEG Options." This section gives you three options -- Baseline Standard, Baseline Optimized and Progressive. Baseline Optimized is selected by default.
What are these selections and what do they do to the image file. I'm concerned because I am using a particular JPEG image for color optimizing my monitor and printer. Thanks.

Thes are just different ways that JPEG compression can be done.
> Which choice gives me the best image for printing?
You mean you are sending it out for printing? Go for Baseline Standard [the default].

Custom Oracle Report errored with Enter Password: REP-0004: Warning: Unable to open user preference file. REP-0300: ORACLE error occurred. REP-0069: Internal error REP-57054: In-process job terminated:Terminated with error: REP-300: ORACLE error occurre

Hi Gurus
We have created a custom oracle report and concurrent program and when we ran the concurrent program it is error out with below error
Enter Password:
REP-0004: Warning: Unable to open user preference file.
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Can any one help us
Thanks in advance.
Kumar

Please see
REP-0004 Warning - Unable to Open User Preference File. (Doc ID 26014.1)
ApPsMaStI
sharing is Caring

Error REP-51002; REP-50125 and REP-56048

Hello All,
We are upgrading our Forms/Reports environment to 11.1.2.0.0. For report server setup we have done following:
1) Setup a new VM with 2008 Windows Server R2 64 bit operating system
2) Installed Oracle Reports Server 11.1.2.0.0
3) Pointed our new Forms Server (which is also 11.1.2.0.0) to use this new report server.
Normally reports work fine, but at times it results in error. At times with error it brings the whole report server down as well.
In the Enterprise Manager it shows following log messages:
Dec-13 3:44:01 (Incident Error) REP-51002 : Bind to Reports Server willow_reports_qa1 failed.
Dec-13 3:44:01 (Incident Error) ServerManager:getServer Bind to Reports Server willow_reports_qa1 failed.
Dec-13 3:48:20 (Incident Error) REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 completed: Maybe
Dec-13 3:48:21 (Incident Error) REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
Dec-13 3:48:21 (Incident Error) REP-56048 : Engine rwEng-0 crashed., job Id: 327
Dec-13 3:48:21 (Incident Error) REP-56048 : Engine rwEng-0 crashed., job Id: 327
Any help will be highly appreciated. Let me know if you need additional information.
Regards,
Saket Maheshwary

question. Did you solve this? If so was it because you firstly needed to create a Report Server and register it with Enterprise Manager?
Pamela

Error rep-0066 and rep-3335

I have problems with reports builder, suddenly i recive the next error :
REP-0066 Error executing CA utility.
REP-3335 Unhandled internal CA Error
calaa 3
I don't have any problems accesing the data base, the free space in my hard disk is huge and all the software was reinstaled, but the error still apears, If anybody has experienced this or has any idea why this is hapening please let me know.
Tnx for your help.

Hi Yuri
Is this specific to one RDF file only? There are no known reason for this error [which is very generic error]. All it tells is that some internal error is occured in CA utility and is very difficult to predict like this. I suggest, you get in touch with Oracle Support on this.
Thanks
Rohit

Report Errors REP-1051 and REP-1070 when saving

Similar Messages

Maybe you are looking for