Reservation of Stock for different business processes

Hi
We have a scenario  like two types of sales processes are there
1. Direct Sales
2. E-sales
From Plant-A  both sales will happen, but while creating sales order for   direct sales 70% of the plant capacity  and E-sales 30% of the plant capacity.
plant capacity we are mapping with planned orders
how can we acheve this.
reagrds
rajendra

I doubt that Reservation of Stock is possible for different business processes. Based on Sales Orders, the stock will be consumed.
Regards,
Rajesh Banka

Similar Messages

  • Multiple integration flows for different business operations

    Hi - I have following business requirement & need ur advice.
    There are different business operations (read as INSERT/DELETE/QUERY) to performed on same business object (read as CUSTOMER). In order to develop these integration use case I can have following three approaches.
    *1. Single Requestor ABCS & Single Provider ABCS -* Develop single integration flow & implement logic for the business operations in them. That means, Develop single Requestor ABCS for all business operations, which will call the EBS and again EBS would call same Provider ABCS. Both Requestor & Provider ABCS would implement business logic for all business operations required.
    *2. Single Requestor ABCS & Multiple Provider ABCS -* In this case the flows for all business operations starts with single point service. That means, Develop single Requestor ABCS for all business operations, which will call the EBS and again EBS would call different Provider ABCS based on the business operations. The Requestor ABCS would implement business logic for all business operations required. There would be different ABCS service for different business operations.
    *3. Multiple Requestor ABCS & Multiple Provider ABCS -* In this case the completely independent flows are to be developed for all business operations. Independent Requestor ABCS and independent Provider ABCS. Off course if there some common business logic for all or some business operations, those can be implemented as common service & can used across all independent flows for different business operations.
    Please do suggest what approach would be best one to pick up. Or it is case to case basis. In case yes, please suggest the criteria on which the decision can be taken.
    Thanks In Advance
    Priyadarshi

    Hi Pryadarshi,
    AIA recommends having an ABCS for each Verb and Noun combination for a specific Business Process, i.e. CreateCustomerABCS and UpdateCustomerABCS. Therefore, #3 would be the preferred approach. This is to allow for maximum flexibility. However, you may have a process that demands to model the integration as #2.
    The decision would depend on how the participating application services are modeled and the granularity of individual service call. For example, a ProcessCustomer invocation at the source end may call CreateCustomer provider service.
    Regards
    Rohit

  • GR/IR Automatic Clearing for Different Business areas items

    Hello All,
         we have different business areas, and some times we create a PO for all business areas and invoice it in a specific business area
    in F.13 automatic clearing:
    for GR/IR account
    Documents with different business area cannot be cleared.
    any idea to solve this issue is appreciated,

    Thanks for your reply,
    I've tried such a solution with more parameters ( EBELN, XREF3 and EBELP)
    but in F.13 :
    - the document cannot be cleared when >>> selecting GR/IR account special process.
    if we treat GR account as a normal GL account, I mean without selecting GR/IR account special process.
    the document can be clear
    i want to be able to clear the document with selecting GR/IR field ( is it possible )
    and if it is not allowed, do we will face a problem by clearing GR account without selecting GR/IR parameter ??
    Many Thanks

  • 2 Logical Components for 1 Business Process Step

    Hello All,
    I'm looking for a way to assign in SolMan --> transaction Solar01 - Tab Structure - Business Process Step, 2 logical components for 1 business step. When creating the business step I have to assign 1 specific logical component to this step. Once I have done this I can only select  the chosen logical component ffor SAP Transactions, configuration object etc.. As my business step is running on 2 different systems I need to find a way to link transactions etc. in the step to the different systems. Is there any way to change this for the Level 3 elements, like it is for level 2 (business processes) where I can choose in the different tabs between all the logical components?
    Thanks in advance
    Ramó

    I've seen people use some absolute craziness to get more than three levels. The most extreme being using multiple projects at the highest level (i.e. a project for PTP Accounts Payable). Don't go there.
    I personally like to have 1 transaction per process step. Don't use the transaction tab as another process level, use it to better describe the process step (like all the other tabs are uses). It results in a better understanding of the system as you go forward. To do that I make teams break up things they think are one step (this can take some arm twisting, so hit the gym and maybe take a few judo classes).
    This allows you to use SolMan in more powerful ways. For instance, if you attach development objects to a step with 5 transactions, you cannot tell which transaction is modified by the development object. However, one transaction per node provides you this link. There are other examples, but basically the "where used" button becomes very useful when you have 1 transaction per node.
    Maybe you could provide a specific example of your process and we can think of a better way to collapse it.
    Such as:
    - PTP Non-Merchandise Purchasing
    -- Expense Purchasing
    --- Create Purchase Requisition
    --- Create Purchase Order (Assign Vendor & Price)
    --- Send to Vendor
    --- Post Goods Receipt
    --- Perform LIV
    --- Process Payment
    Some companies have 6 level processes already defined in models and putting it into SolMan can be a pain for sure. Your naming convention is usually the best route.
    regards,
    Jason
    The system role and template work around doesn't apply to your situation.

  • Monitoring Tool for Monitoring Business Process

    Hi All,
    Is there any monitoring tool which is able to monitor various technologies .
    we are integrating biztalk with SAP and we are looking for a tool which we can use to monitor both, is there any?
    Praj Dixit

    Hi All,
    Is there any monitoring tool which is able to monitor various technologies .
    we are integrating biztalk with SAP and we are looking for a tool which we can use to monitor both, is there any?
    Praj Dixit
    If if want just to monitor various technologies, lets say BizTalk, then there are lot of tools available for this. BizTalk 360 and SCOM are two main tools.
    similarly if you want to monitor SAP- like availbility of SAP services/URLS/Databases etc, then HP OpenView can be one option.
    However, if you just want to make sure your business process ( integrated BizTalk/SAP..etc) are up and running then you could write some Automated Smoke test scripts, which will perform some basic testing and make sure all components are up and running. 
    Hope this helps. 
    Greetings,HTH
    Naushad Alam
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or
    Mark As Answer
    alamnaushad.wordpress.com

  • REG: Creating customer stock for different material codes has an single set

    Hi FRIENDS,
    we  are purchasing finished items from our vendor in numbers (Eg. Item Number 1 to 6 (all different items and having different item codes)) and selling it to our customer in a set ( 1 set contains all this 6 items and we have code for this Set).  Please let me know how to create the customer stock for these items in the store as the store shows stock for 7 different  items, not in a set.
    Please let em know if any more information is nedded

    hi dan,
    as per your requriment you can have all MRP viewsfor HAWA material type.
    that means you are purchasing, use HAWA for finished goods in SAP system.
    if you are having different item codes seperately for each item.
    take one packing material called CARTON and maintain UOM as 6 items and you can pack the same in BOM.
    use PP -PHANTOM - BOM which should add all the 7 materials in & gives one single material as OUTPUT.
    use 561 GMT and upload that material as a final finished goods and in MMBE you can see only one called CARTON inside it set of 6 materials will be there.
    BUT BE AWARE OF COSTING OF THE MATERIAL because each material will be having the its price. So discuiss with PP as well as FICO consultants.
    whether you will cost the total set of carton or individual material
    go ahead
    test and confirm
    this clears your issue
    balajia

  • Validation require for different business area in MRO

    Dear friends
    System is allowing posting of different business area in Miro (Line item & Header item).For disallowing I have checked Validation, I think it is not usable.Please suggest me another solution.
    regds
    sachin

    Hello,
    You can use MRM_HEADER_CHECK bAdI for this validation.
    or
    You can use Enhancement (CMOD transaction) LMR1M001 -EXIT_SAPLMRMP_010 for this validation
    Regards,
    Burak

  • Different business processes of SD!!

    Hi SD experts,
    i am PI resource...and i am very very curious to know about the different key areas of Sales and Distribution.if any 1 have some ppt. or some good document please pass it to me..
    just want to know "Outbound delivery" falls under  which part of business process.
    Thanks
    Biplab

    hi das
    Outbound delivery is the part of sd business process.  In bound delivery is the process of wm business processs.   or mm business process inventory business process.   \
    you can get more clarity on this slideshow http://www.slideshare.net/arun_bala1/sd1-sales-overview/
    Reward points if you feeel this answer solve your query
    Thanks & Regards
    rack29

  • Admin View or Functionality for the Business Process Owner

    Hi
    I have a requrirement that Business Process Owner (not the IT person), should be able the search the process instances and take action on them like "terminate process" or "Change Authorization".
    However the Business Process Owner do not want to go through the "Guided Procedures" -> "Administration" -> "General" menu clicks.
    Business Process Owner should able ONLY to get to "Maintain Processes" option of the "General" or "Overview" menu.
    Also,
    Business Proces Owner would like find the process instances based on only the  Instance Name and/or Instance Status and/or  Start Date Range.
    Is there a prebuilt functionality or is there way to utilize the SAP CAF delivered components by configuring the permission/roles. 
    IF NOT, how to access the process instance data so I can custom build this kind of functionality.
    Thanks,

    Hi Abhay,
    As I know GP does not provide such a pattern which covers your requirements.
    You can build this functionality in custom way.
    I propose the following:
    Use the
    public IGPProcessInstanceInfo[] com.sap.caf.eu.gp.process.rt.api.IGPRuntimeManager.getCompletedInstances(GPSearchRole searchRole, Date startDate, Date endDate, IGPUserContext userContext) ;
    and
    public IGPProcessInstanceInfo[] com.sap.caf.eu.gp.process.rt.api.IGPRuntimeManager.getRunningInstances(GPSearchRole searchRole, Date startDate, Date endDate, IGPUserContext userContext)
    to retrieve process instances by your search criteria.
    As search role you should use the GPSearchRole.OWNER.
    After this you can filter these processes by name in custom way and represent them.
    To terminate a process instance you can use the following method:
    public IGPProcessInstance com.sap.caf.eu.gp.process.rt.api.IGPRuntimeManager.stopProcess(IGPProcessInstance processInstance, IGPUserContext userContext) ;
    You need to use GP exposed public api:
    DC: caf/eu/gp/api
    PP: external
    POssible it helps.
    Best regards,
    Alaiksei

  • How to set up Pymnt Method for different business units

    Hi,
    Can anyone shed some light as to how to set up P Method in FBZP in a way that one type can be identified according to its Business Unit?
    To clarify, FBZP is currently set up in a repeated way:
    Pymnt Methods:
    T - Transfer - Business Oil
    S - Transfer - Business Engineering
    V - Transfer - Business Equipment
    A - Boleto - Business Oil
    N - Boleto - Business Engineering
    C - Boleto - Business Equipment
    As you can see, we are repeating same payment method as it is needed for business to identify which business unit this refers to.
    Is there a way of setting up only one type of Transfer and one type of Boleto and how this will categorize the type of Business Unit ??
    Any input is welcome
    Regards
    Roger

    Hi Roger:
    How about some enhancement on F110? The logic would be something like read all the proposal lines, group by profit center and then re-assign the payment method based on profit center. There are couple of user exits available starting with RFFOX###, depending on the payment method and the program you using.
    Something similar to substitution rules user exit.
    Not sure if there is any other standard configuration to combine lines by profit center.
    Thanks.
    Rahul

  • Can we maintain Same No. Ranges for Different Business Places & Section co

    Hi All,
    In Extended Withholding Tax for Remittance Challans we create number ranges,our cleint having five business places. We maintained the number range for only one Business place. I want to know whether can we copy the same number ranges to remaining Business places or we has to create new number ranges for the remaining Business Places.
    Regards,
    R.K

    Hi AnjiReddy/Chetan,
    In EWHT-> India-> Remittence Challan-> Maintain Number Groups, I copied one Business Place-xxxx, and while i am executing T.Code:J1INMIS, the system throwing an error "Number group not maintained for CO Code:YYYY, Section:xxxx, Business Place:194C".
    Regards,
    R.K

  • CRM WEBClient UI -The same screen-menu appears for different Business Roles

    Hi Experts,
    We are working with CRM 2007 and are facing the following problem:
    After starting the CRM WEBClient , a screen with two Business Roles appears: u2018SALESPROu2019 and u2018SERVICE PROu2019 (because in my User I have added the roles: SAP_CRM_UIU_SRV_PROFESSIONAL & SAP_CRM_UIU_SLS_PROFESSIONAL).
    I select the one of the two roles (e.g. SALESPRO) and then I choose u2018backu2019 and select the other Role (SERVICEPRO) but the same screen appears with the menu from SERVICEPRO .
    I noticed that the menu that appears has to do with which business role I select first.
    Do you have any ideas what could be the problem?
    Best Regards,
    Roula

    Hi Roula,
    In CRM 2007, the CRM Webclient doesn't have the capability to switch from one business role to another directly as you are trying to do. The only option to switch is to logoff from Webclient and login in another role.
    regards
    Srikantan

  • Does SAP provide  visual funciton for configuration of business process  ?

    I mean ,take the defining the sales process for example, a company may have many types sales,the standard sales process, sales without delivery, sales with delivery by other companies so on and so forth.
    Can I have a visual configuration which makes the work easier.   I mean finish the process definition by just picking ,dragging the relevant icons which represent different documents type.
    I know,oralce EBS and many other ERP have such functions.
    BTW. I am a novice at SAP.
    thank you very much
    Edited by: humility on Dec 15, 2008 4:25 AM

    Hi,
    I understood your requirement as, you would like to have a  pre-configured set for every business process like sales, returns etc... These pre-configured solution r available in SAP in terms of BC set, more information you can get in the SAP Best practise (http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm)  wer for every business process you can install the building block which SAP has created.
    Regards
    Mani

  • Business Process Procedure Customer reservations, Check ins, check outs

    Hi Experts
    Iam facing a big challenge in trying to process a Customer reservation check in ,check out process for guest houses and Hotel properties for my client using RE-FX functionality.I have already defined a room using the architectural view and used the customer rights of use contract for the process. The challenges are , iam failing to pick up the room from the contract when assigning it in the contract on the object tab page
    2 whether also the particular contract i have picked up is the correct one for this business process.
    Help to this particular issue is very much appreciated
    Regards
    David

    Hi David,
    In order to use any rental object in a contract you have to ensure following;
    1. Rental object is created in usage view. Here if you have architectural object then you can assign this with Rental object.
    2. Rental object is permitted for your required contract type.
    This way you can pick your object from Object tab in contract.
    Regards,
    Atif

  • Module Business Processes (request for detailed website links)

    Hi,
    I'd like to learn more about the different Business processes inside all of the SAP modules. For instance, I'd like to know what Business Processes are included in each SAP Module, what they do, how they are used, what their specific objectives/outlines/uses are and etc.
    Please provide online links and documentation that can help me learn more about what each module is and does (in terms of the module specific business processes.)
    Any and all help will be greatly appreciated.

    Hello John,
    Take a look at this.
    https://websmp202.sap-ag.de/bestpractices
    Detailed information on all SAP Best Practices scenarios (Scenario Overview, Business Process Procedures, Installation Guides etc.) can be found in the SAP Help Portal (http://help.sap.com/)
    Cheers !

Maybe you are looking for