Reverse Production Confirmation After Usage Decision (UD)

Hi All ,
             We are using Quality Inspection Type 04 ("Good Recipt production Inspection ") . We have Done some wrong Entry in Production Confirmation after that quality person also did Usage Decision for the inspection Lot. now we want to cancel this confirmation . will some one help me how we can reverse UD (Usasge Decision) and Cancel the production confirmation .
Thanks In Advance .
Regards

Dear Jaideep,
Check out this,
Do you mean to say you want to cancel the document for which 321 movement has been made where the stock has been
cleared from quality to un-restricted?
This is not possible,unless if you have used SAP notes,
Note 1108313 - Cancelling usage decision and lot
Note 175842 - Inspection lot: Reversal of goods movements from UD.
Otherwise cancel the confirmation and the error movement 102 will be going to COGI.
Do 102 through MB31 against that order and delete the 102 error from COGI.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

  • Need to send data, after Usage decision in quality inspection (QA11)

    Hi all,
    After Usage decision in quality inspection (QA11), i need to send some data like material number, qty etc to external database or to external party. is there anyway i can achive this in real time? real time means, it should send the appropriate data to external party after usage decision is made.
    Thanks
    Pabi

    Hi,
    You can change results recording in case the MIC in the inspection plan of the lot are marked as "long term characteristics", else it wont be possible to change result recording.
    you can change the UD code only after giving the Usage decision.
    you cannot change the defects recording.
    Thanks
    SUMIT

  • Cancelling material document after usage decision

    hi experts,
    how to cancell a material document after usage decision has been made (quality to unresricted stock).
    thanks in advance
    regards
    jai

    Hi,
    whenever you do cancellation for material doument then its always done for the same stock type for which you have made GR....
    If you wanna do from it then Choose cancellation and material doc and enter the mrtl doc no.
    and execute ...
    Hope it helps..
    Regards,
    Priyanka.P
    AWARD IF HELPFULL

  • Printing of Inspection Report After Usage Decision

    Hi,
    I want take the print out of Inspection Report after Usage Decision completed.......... Can you plz guide the complete Confiuration & related transaction codes for this........
    Regards,
    Raghunath

    Inspection report can be printed from QA33 t_code.
    There are some pre requesites for this,
    i)   In material master 'Inspection with task list' and 'Check characteristics'  should be activated.
    ii)  Inspection plan for that material should be present.
    iii) Record results for these inspection characteristics and take Usage decision.
    iv)In QA33 t_code, u can see 'inspection report tab' . click on that tab.
    v) Give output device and see print preview.
    U can see inspection report with all details.
    Plz. revert back

  • How we can reversal of 553 after usage decsion

    HI Dear
            I want to reversal of 553 after usage decsion with inspection lot kindly give me instuction how i can revesal of 553 with inspection lot.kindly help me
    Best regard,
    zohaib Rehman

    Thanks for ur solution but i want to revesal of 553 with respect to order. Actually movement type assign back end configuration 553 and when our end user done 262 (reversal of consumtion order) lot will be created in 05 origion and end user done usage code r (rejected) after this post quantity in  scrap now ud is done all inspection lot complete.   i want to reverasl of 553 usage decion  inpection lot with respect to order,
    kindly guide me
    regard
    zohaib rehman

  • Sample  still showing in quality inspection stock after usage decision completed

    After process order completed, we have received 100 units as a quality inspection stock.  After usage decision,( QA11), I have posted 98 units to unrestricted use and 2 units to the  to sample usage
    98 units successfully move to unrestricted stock.
    However 2 units for sample still showing quality inspection stock.
    I have checked MB51, mat document number for sample is 4900000160 and movement type is 331
    Do you have any idea why sample still showing in quality inspection stock. It  should consumed and zero out the quality inspection stock in MMBE

    Hi,
    Please check you MIC's control Indicators.
    Is it tick on Destructive insp. under Sample tab ?
    Please tick it and try again with whole process.
    Destructive Insp. : You specify whether the sample is to be destroyed after inspection. This means that is no longer available. This quantity is used in the usage decision as the proposed quantity for the posting to sample.

  • Material Disposition After Usage Decision

    Hi Gurus,
    Im working on a scenario werein I need to change the Defect recording after I need to change the disposition of the material. The process is, the lot will be rejected, and will go to a certain Location. In this location, the user will decide whether it can be rework, return to vendor or use as is. User will need to key in in the system.
    At first, I though I can just use of changing the usage decision. But they say they need the disposition per item in the defect code. But once I have done usage decision, Defect cannot be changed.
    Please help to identify other process that I can do.
    Thank you,
    Raymond

    Dear Raymond
    Then in that case the only solution will be to activate notification.Please follow this process
    1) Maintaina default notification type in the inspection type in the config
    2) When defect recording is done automaticaly notification will be created
    3) When UD is given notification also gets closed automaticaly
    4) Go to notification ( in UD screen , select the defect and click on Notification and put the notification back in process (menu button > function> Put back in process
    5) Here you can edit the defect or add defect and automaticaly gets assigned to the inspection lot
    Please check and revert back
    Regards
    GN
    Edited by: Gajesh Nagesh on Feb 3, 2010 6:14 PM

  • EWM with QM -Inspection label not getting printed after usage decision

    Hi Experts,
    We checked configuration settings related to this but we could not find missing configuration. Right now we are not able to print label after we take usage decision. Please let us know your inputs on this.
    We are using /SCWM/QINSP for usage decision.
    Thanks & Regards,
    Prashant

    We changed the printer name in condition record and we could print the label.
    Regards,
    Prashant

  • Financial posting after usage decision.........

    Hi there ,
    Please tell me where I Can see the financial posting & variance after the usage decision has been done for an inspection lot in QA11 ?
    Thanks
    Kaushik

    Financial Posting will take place after MIGO & MIRO
    The financial posting will be as under:
      1. When GR is posted 
          Inventory Account dr (Transaction Key BSX in OBYC)
                To GRIR account (T.Key WRX in T-code OBYC)
      2. When Invoice is posted
          GRIR account Dr.
          Vendor account  Cr.
    Regards,
    Rajesh Banka

  • Update purchase order history after usage decision from quality

    Hi guys,
    I'm working with active ingredients, after entering the % of the active ingredient in quality, then making the usage the decision, I need to update the history of the purchase order for the quantity posted.
    what I mean is that if I received 1000 KG of a raw material, then in the quality check I found that the % of the active ingredients is 90%, I update the purchase order quantity to 900 KG, I know that this is made by using transaction MWBQ, but what are the settings I have to make at the very beginning before using transaction MWBQ
    Regards,

    check the below forum link related to this.
    Re: use of Tcodes: MWBQ & MWBE

  • SAP QM Issues regarding follow-up action after Usage Decision

    Dear Gurus -
    Kindly need your expertise to resolve these issues regarding follow-up action.
    1. After taking the UD i need to trigger the follow-up action to send an email with the long text to a group of people. As per standard SAP the email goes to the person taking the UD. Kindly can some one explain what & where do i need to make the changes. Also please let me know what is the customized Email ID table where mail ID's will be stored which fuction module can extract.
    2. Can i also use the same functionality for partial lots during inprocess inspection. I need to send an email to a group in case the valuation is rejected for that operation.
    Any response is highly appreciated.
    Thank You.
    Edited by: sunil t on Jan 6, 2010 7:03 PM

    Hi
    Please go through my recent thread
    Incomming Inspection Auto mail if Rejected
    Regards
    Sujit

  • The Usage decision cancellation & quantity reversal

    Daer All,
    While cancelling the Goods receipt, system gives the error Deficit of SL Stck.in qual.insp 10 M : 5000017/1 PMT1 RMST as the usage decision of quality lot generated for the goods receipt is done.
    I want to cancel/reverse the usage decision made & the quantity release from the lot to be initialised, so I can cancel the Goods receipt.
    I have applied the Note 175842 & User Exit QEVA0008
    But when I cancel the usage decision in QA11, only the usage decision is cancelled. The quantity which is moved to un-restricted stock after usage decision is not reversed.
    I want to reverse the quantity, so i can cancell the goods receipt.
    Regards,
    Prakash

    Hi Prakash,
    Please note that SAP doesnt provide an option to reverse a UD once its done.
    Now to solve your issue, Since you have already done QA inspection the stock is moved to Un-res.
    So when you cancel the Material/GR document, select the stock type as un-res then system will allow to post the document.
    Regards,

  • Production Order Receipt Block before Usage Decision is Made

    Dear all,
    I have a requirement to block production order receipt through MIGO into any storage location before the usage decision has been made for that production order.
    This should be the rule for all non serial items, meaning that it should only apply to batch controlled and neither batch nor serial controlled materials.
    Could someone please help me on this?
    Thanks,
    Sergiy

    Hi,
    Is it possible through by maintaining the inspection type for the material master. Then the material will be moved to quality stock after usage decision then you can move that material to unrestricted material.
    For Batch managed or serial number profile defined material don't activate the inspection type.
    Hope this might help you.
    Regards
    Ravi shankar.

  • Ship product before Usage Decision

    Hi Gurus,
    I have a scenario where client wants to ship / deliver finished goods to either customer or to other plant before completing the quality usage decision.
    The reason for this is there are certain characteristics which takes 25 to 30 days to perform results recording. Typically, sample will be sent to external lab to perform inspection of this characteristic. Client wants to keep the sample and ship the finished product to the customer. ( Not sure what if sample is rejected, )
    However, i believe that shipping the finished product without completing usage decision may not be possible becuase the stock status before UD is under quality.
    Could someone please help me in mapping above requirement to SAP please. - Many thanks!
    Regards,
    Seshu

    Hi Dsk,
    Many thanks for the response,
    I would be glad if you could eloborate the setting needs to be performed in SAP for turniing-on long-term characteristics. Where do we do this ?  What is the difference between long and short term characteristics ?
    Does system allows you to ship product before UD  to customer ? i,e product will be shipped from quality stock to customer ?
    Many thanks
    Regards
    Seshu
    816-529-6256

  • QM Module: Usage Decision for Inspection Lot

    Dear All,
    After made of Usage Decision the Notification will receive to the respective Managers as mentioned below:
    IF Usage Decision is <b>QCR</b> then Notification will receive to only Marketing Manager
    IF Usage Decision is <b>MR</b> then Notification will receive to Logistics Manager, QC manager and Production Manager
    IF Usage Decision is <b>MA</b> then Notification will receive to Logistics Manager, QC manager and Production Manager
    IF Usage Decision is <b>MAC</b> then Notification will receive to Logistics Manager, QC manager and Production Manager
    IF Usage Decision is <b>QCA</b> then Notification will receive to Logistics Manager, Marketing Manager and Production Manager
    Any Suggestions pls, workflow logic in this requirement.
    Is there any Solutions without ABAP coding.
    Thanks and Regards,
    Prabhakar Dharmala
    Message was edited by:
            Prabhakar Dharmala

    I'm sorry, I am not sure if I understand any more now, but one quick check: When you write RULE, are you specifically meaning RESPONSIBILITY RULE?
    I said that a rule is needed to specify work item agents (workflow step specification of selected agents). It is not quite true, you can specify the selected agents in other ways such as using expressions etc. You could therefore create a subtype of your business object where you define virtual attributes for the different agents you mentioned, i.e. a virtual attribute AG_MARKETING_MANAGER, another one called AG_LOGISTICS_MANAGER, a third one called AG_QC_MANAGER, and finally one called AG_PRODUCTION_MANAGER. These should have the data type TSWHACTOR.
    However, you are asking for a method that does not involve rules, AND does not involve ABAP coding. I think you are out of luck there, because the virtual attributes will require (some) ABAP coding, and of course this approach is of more interest if these managers can be determined based on data that are maintained anyway - to save you the addition maintenance of the responsibility matrix in the workflow (responsibility) rule.
    You can obtain exactly the same by creating a workflow rule that takes whatever parameters are relevant, plus the Usage Decision.
    If you want to send a single step/mail to all the managers (I couldn't quite understand if you wanted a single step to a varying number of managers or a varying number of steps) the latter solution would be the best one, as the rule would give you the correct list of managers without any additional steps in the workflow.
    If you create virtual attributes you can use container operations in the workflow to put all the relevant managers into one multiline container element. But that seems rather awkward compared to creating a workflow rule.

Maybe you are looking for