RSEOUT00 - ECC 6.0 IDOC Dispatch Error. Status 30 goes to status 02

After our Unicode conversion to ECC 6.0, we started to get some IDOC processing going from status 30 to 02 and not dispatching to our EDI provider. We noticed it is on the PO Long Text or any of the Text fields for that matter where somebody has Cut/Paste Text from Word/Excel/Outlook document and they are using colors/fonts/bold, etc. We've also noticed it on our MAKT table on the description. You click on the Text and can see it outlines extra characters beyond the end of the visible text. When RSEOUT00 gets a hold of these PO's, it won't dispatch them. If we go back and erase the text and type it all in by had and save and close our PO Version change, it dispatches, pulls and loads now to our EDI provider. Looking for some setting that allows us to maybe turn this feature off? maybe it has to do with CodePage defaults, etc. I saw once were you could tell SAP to save documents in Office 2007/2010 version instead of Office 2003 but don't remember which OSS note that was.

Try to use "Line Editor' or 'Sapscript Editor' instead of "Continous Text Editor". You will find these editor options below to the text fields in text maintenace tabs. Hope this helps.
Regards,
Gokul

Similar Messages

RSEOUT00 run sends duplicate IDOCs causing duplicate payments

We are using RSEOUT00 to send out payments to vendor using PAYEXT type. Program is run in background job mode on daily basis.
Occasionally, 1 IDOC out of couple of hundred gives error and then program starts from the beginning and send out all IDOCs again sending those before the 'error' IDOC twice.
Today's error IDOC had below status in the given sequence:
01
30
02 - Could not write to file (At this stage it restarted the process)
30 (Second attempt worked fine)
03
20
24
06
08
10
This is happening atleast once a month.. Any suggestions would be appreciated.
thanks.
sudhir

Hi Sudhir,
I see two seperate issues here...1) why is the job periodically failing to write to the output file and 2) why is RSEOUT00 not marking the idocs written to the file to status 03 as they are written? Sounds like it is trying to write all idocs to the file before changing the status messages.
As to point number 1, please check with the unix team to determine if the files are written to a NFS mount point. There could be a possibility that the NFS mount has sporadic issues, causing failure of the job. This situation would be very difficult to diagnose and recreate. However, I have seen this issue at a client site.
My concern is that I would expect RSEOUT00 to exit at failure, leaving a single file on the server with 19 records. I would then expect the next occurance of RSEOUT00 to run and process/write all 380 idocs to a second file. However, per our conversation you indicated that RSEOUT00 only ran one time, creating two files. Can you please confirm if my understanding is correct, and if there are any other batch jobs (or steps within other jobs) that call RSEOUT00 and picking up these idocs.
Whether RSEOUT00 ran once or twice, I see the failure during the write to the file as the primary problem to be solved.
Terri

Status 56 - IDOC with errors added

Hi everyone,
 I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 - IDOC with errors added "EDI: Partner Profile not available".
 but i had already created Partner profile in WE20.
Regards,
Varun Reddy.K

Hi Varun,
 The below link will help u in solving u r problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Just try follow the steps followed in above mentioned link
And also check u r RFC connection in TC "SM59".
Reward with ponits if helpful
Regards
Sai Ganesh

Inbund IDOC error: Status records with status 51 after status 53

Hi all,
I'm looking to resolve an issue related to posting an inbound IDOC. when I process inbound IDOC created from report prg I'm getting a status message: "Status records with status 51 after 53" .
Functionality: I'm creating an IDOC from flat file and processing it to post Customer master data into SAP. During this process creation of IDOC is successful but when I'm changing the existing data record (customer master data) IDOC is throwing this error.
Changing data: For changing existing data I'm passing KUNNR field and overwriting the remaining data. Even though the idoc status is 51 the changed data is getting posted in to SAP. Here my concern is to see IDOC status as 53.
Regards,
Ganesh.
Edited by: Ganesh Sunkara on Aug 1, 2009 3:45 AM

Hi all,
I solved this issue by myself. There is an error in the user exit code.
regards,
Ganesh.

HRMD_A IDocs in Error Status 02

Dear SAP Peeps,
Upon generation of outbound HRMD_A idocs, an error occurs. Error status is "02 - Could not find code page for receiving system".
Can you guys assist me here? What does code page mean? How the error will be solve? The error occurs in every two weeks upon sending the idocs. Sending system is a unicode system while the receiving system is a non-unicode system.
Thanks!

i Think u have run some personnel acitons
than u need to check the table T529A and check have u assigned the feature which standrad in sap for certain acions
for Ex MSN20 MSN10 check these thr PE03
in IMg
check SEt up personnel Acitons

Idoc inbound error status code 56

Hi,
   when i am sending custom idoc from source system to destination , idoc sent successfully from source system .But in the receiver system idoc status code is 56 ( idoc with errors added) .
partner profile also available in the receiver system. How to solve the error.can any one pls give me the solution.
                                                                                Regards,
                                                                                Suhash.

Hi,
Check this link..[IDOC Status code 56 !!   |IDOC Status code 56 !!]
[Re: Status 56 - IDOC with errors added   |Status 56 - IDOC with errors added]
Edited by: Avinash Kodarapu on Mar 19, 2009 4:55 PM

Idocs with error status

Hi Everyone,
How to find all idocs with error status for a given date range?

Hi,
Please refer EDIDS for Status and EDIDC for control records.
Also refer the below wiki page for details.
http://wiki.scn.sap.com/wiki/display/ABAPConn/IDoc+Overview
Thanks,
Karthik

IDOC INBOUND ERROR ( STATUS - 51 )

hi all,
when procssing the inbound idoc's i am getting an error ststing that " No status record was passed to ALE by the application " what may be the problem .
helpfull answers will be rewarded with points.
regards,
murali.

See the code in this function module IDOC_INPUT_CLOSE. I think, even though you are writing the status records to the database, you need to send a status back to XI(ALE) with your status record. That is why I think you are getting this message.
In WE02, what do you see as status records for 1)original IDOC and 2) your new IDOCs?
Are you getting this message after you create the new IDOCs or before you split them? Can you tell us what is the logic of your function module(just design logic not the code)?
Regards,
Srinivas

IDOC: Update ERROR status

Hi Experts !!!!!!
I am creating outbound IDOC for Informatica as middleware.
Once transaction is saved in SAP, customized workflow will start on a trigger event and create IDOC using MASTER_IDOC_DISTRIBUTE. Before calling MASTER_IDOC_DISTRIBUTE i am doing few mandatory field validations.
My requirement is to generated IDOC, even validation fails and set status to '26'. I also need to set customized message in error status mentioning why IDOC failed.
Can anyone suggest how to achieve this.
Regards,
Rushikesh

Hi,
Did you configure partner profile with appropriate information?
Thanks,
Ganga

IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

Hi
We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
Any help in this regard is highly appreciated.
Thanks
Pandiri

User Exit activation and fixing the issue in user exit fixed this issue.

RBDMANI2 for IDOCs in error not working in Background..

Dear All,
 We have an ALE-IDOC scenario in which our IDOC gets posted in the destination system with status 51 as per business reqt. We schedule a job in the background using program RBDMANI2 which is used to manually reprocess IDOCS in error.
 This background job was working fine in the 4,7 R/3 Server, but we have upgarded the receiving system to ECC 6.0. Now the problem is dat when we try to reprocess the IDOC using this job, the IDOC are not processing further.. It ideally is supposed to do further processing as per the code writen.
We tried debugging the code(RBDMANI2) in background. But, its not helping.
Kindly advise.
Regards,
Santosh Reddy.

On primary research I found that there is a call to this FM 'SAPGUI_PROGRESS_INDICATOR' .
In that FM see line 12.
IF SY-BATCH <> SPACE.
 EXIT. "do nothing in batch
 ENDIF.
May be this is the cause of your error.
Rhea.

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

WPUUMS IDOC Posting error

HI,
When i am sending aggregated sales data to wpuums idoc, it is giving error ...Document 90000007 saved (error in account determination) (MATNR Unknown)
When i cheked with VF02, its say doucment does not exit.
Please provide some solutions.
Regards
Laxmi Bhushan

Hi
Check the status of IDOC in WE02 or WE05 .From status records you can identify the exact issue.
If error is matnr is unknown then that means either material is not in correct format or not extended to correct sales area.
Regards
Mandar

File to Idoc - Outbound Error

Hi,
I am doing File to IDOC scenario. I got error
in "Message has error status at outbound status" .. When
I opend that messeage then i got this ...
<SAP:IDOCTYP>ZIDOCIN</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>ZMTIDOCIN</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPX11</SAP:SNDPOR>
<SAP:SNDPRN>Logi_01</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPA11</SAP:RCVPOR>
<SAP:RCVPRN>A11CLNT200</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
Can any one tell me what to do to solve this.
thx,
Ansar.

Hi,
There is somethig worng with your Partner Function while defining the the Partner Profile, please check it. The Partner function is optionla and see if you need it
Go thru the link,
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Thanks,
Prakash
Thanks,
Prakash

RSEOUT00 - ECC 6.0 IDOC Dispatch Error. Status 30 goes to status 02

Similar Messages

Maybe you are looking for