Same regionheights "a cosmetic issue"

Hi everybody
I have a page with 4 parallel sql-report-regions.
Each report may have different number of records and thus rendering different height of each reigon!
Is there a way to control the height of a report-region?
Thanks Guan

Is there a way to control the height of a report-region?Use the CSS height/[min-height|http://reference.sitepoint.com/css/min-height] properties.
(Note that min-height does not work in IE6 or IE7 quirks mode.)

Similar Messages

Apple Formats Hard Drive for Cosmetic Issue

So I sent my Apple Macbook in for service for the well know discoloration problem and the "Geniuses" formated my hard drive! I immediately called them to complain but it seems for some unknown reason they only take complaints in the morning. So called back the following day and I issued the complaint. Surprisingly they actually had a reason as to why my hard drive was formated (it wasn't a good reason but a reason none the less). Basically they said that it was formated because I had a password on it and they could not get into the machine to test, which I told them that the login prompt alone was test enough and then asked why they didn't call for my password before they formatted and they said the person who took the original call should have asked me for that information which I immediately told them I was never asked for that information and that I would have happily given it to them if it avoided formating my hard drive so the representative looked at the audit log for the original call and saw that the tech never asked me for my login information among other things (which was a big mistake on there part) and then I asked again since they saw that the information was missing and that there was a password on the computer why didn't they call me before formating my hard drive (they did after all have all of my contact information), the representative had no answer to this. So I went on to explain how formating people's hard drives for no reason was a bad policy especially when their computer was sent in for a cosmetic reason. Anyway the complaint has been logged and now I may or may not get a call back from Apple. So far no call in five days which is why I figured I would post this, I guess if they don't call I'm pretty much SOL. So a little word of warning to anyone sending a computer to Apple for repair don't put a password on it and backup your files even if it is only a cosmetic issue.

So -- everyone is always saying you should back up
everything, but HOW? Do you all have DVD drives or
external hard disks? Is there another way to do it?
I have my most important documents on a pen drive,
and my photos on a CD, and of course I have my
application CDs, but nothing else. It took me MONTHS
to get all my settings the way I like them and to
download all the freeware I like to use, and I would
have been HORRIFIED if my disk had been reformatted
when my case was exchanged, just HORRIFIED!
So do you all just invest in DVD writers and/or
external hard drives, or just what do you do to keep
it all backed up all the time?
Get an external Drive, you can pickup a 250 gig drive for less than a hundred dollars these days.
To the OP it's a shame that your drive was formatted and it should not have happened. However, this is why people backup their drives so when something unexpected happens, drive corrupt, bad customer service etc. you have all your important data and settings preserved.
Mac Mini 1.66 Mac OS X (10.4.7) 60 gb hd, 2 gb ram, 250 gb ext drive, 5g ipod, 2g ipod

Multiple Apple TV's on the same network with airplay issues.

I work at a school with 37 Apple TV's. They are all on the same network, some of them are wired while others are wireless. The problem I am having is that airplay works and then doesn't work for some unknown reason. The Apple TV's are connected to the network and internet when they are experiencing this and I believe that the issue is bonjour. Does anyone know any way of solving this issue.

Yeah, I think wiring them is the only solution to this problem.
We've only got three (well, had one and bought two more this summer - that's when the trouble started).
The first one I got had trouble connecting with the wireless network, so Apple support said to reboot the main router. That is, shut down the entire network while we reboot for one Apple TV. So...OK, I get it, Apple is a CONSUMER company and we're trying to use their products in a school...in spite of that, so far, it has been worth the effort.
But YESTERDAY I got that message about too many devices on the network and to "disconnect a device..." (you know the rest).
So, I called Aruba, knowing that it was a wireless issue and that I've had issues with them and, particularly
Bonjour. Aruba appears to be a Windows only network - would that I would have known that three years ago. But Aruba TAC has NO CLUE what the issue is. So I called Apple Tech Support and they have NO CLUE - weren't even aware of this posting, what, six months ago? (Shows you how much they read and value the forum - we're on our own, boys and girls!)
So...I wired the front of the school Apple TV to a nearby wireless access point and now it's a steady as a rock. But prior to that I actually stood in front of the ATV and watched as it connected, then disconnected, then connected, then disconnected (ad nauseum). Interferrence? Well, maybe, there are only about 150 rogue networks detected in the immediate vicinity - but Aruba ASSURED ME that their WAPs were sophisticated enough to recongnize that and filter them out. (Maybe not?)
So the ATV at the front of the building ocassionally just drops off the network. I can tell because we run a Flickr slideshow on it all day long with announcements and stuff. When I go by the TV and see the thumbnails and no slideshow, I know it has dropped off the network. Usually I can reconnect it. But that's not good enough.
Finally, yesterday, a teacher called me who has an ATV (long story on how she got that) and said she was not longer connected to the network. A shudder ran through my body as I expected (and realized) the worst.
So, my installer is coming tomorrow to wire her ATV into the WAP in her classroom. But TODAY, I have to call Aruba and enable the additional port since it's not enabled by default.
I'll tell you, every day, I get this horrific feeling in the pit of my stomach that this whole world of technology we have built is held together with bailing wire and duct tape and that it just has to blow at some point.
Then I watch Bob Ross do his paintings (and a NEW KID on the block - watch out for him - Kevin Hill - this kid takes Bob Ross to the next level and he's only 18 years old) and think - "What the heck am I doing here, anyway? Why am I not home painting?" But them I start feeling guilty that I'm leaving the school in the lurch. Who will stand up to these bozos who don't have a clue what's going on and, further, don't seem to care, yet, get this, think they are doing a GREAT JOB! I'm telling you, I'm living on Superman's Planet Bizarro!

My new iPod Classic will not sync with my new Mac Book. My iPhone 5 does, so does 2nd gen. iPod touch. Apple Store cannot figure it out. Tried different Classics on different Macs, same thing. iTunes update issue ?

The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
Any help would be apprecated.

By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

Acrobat Pro 9.3.1 MacOSX & XP Not the Same, Having YouTube Embedd Issues

Hello Everyone,
I am currently working on a project that requires cross platform MacOSX and PC XP users to see included Video From the Web from sources such as YouTube and Audio Sites embedded into a PDF.
The content needs to appear the same in both platforms. The content must be a refference file to play within the PDF, video can not be copied and converted to another format and be re-embedded. The content must remain in the format housed on it's local server. *
Using a technique I found on several Acrobat forums you can create an HTML page with the Embed Tags from YouTube then use Windows XP and Acrobat Pro 9.3.1 to convert it to a PDF. (I have VMware with XP and a Trial Of Acrobat Pro 9.3.1)
On the PC you can then open the PDF and see the video play, so on the PC all is good. You can even copy and paste the video between other PC based PDF documents but none of the content is visible or playable within the MacOSX environments (10.5.8 or 10.6.2 with Acrobat 9.3.1 Pro). All You Get is blank page, the content is there if you move your mouse around it will change to an arrow and you can select it but it never connects to load the content. Sometimes it shows it is buffering to download but nothing happens. There is a Security menu that loads asking if you want to allow the connection and I say yes but it does nothing.
Does anyone know how to resolve this issue?
A person in one of the forums sent me a file Hulu Video Embedded into a PDF created on an Windows XP service pack 3 system with a trial of Acrobat pro 9.3.1., the file was a acrobat v.1.7 version accorinding to the properties manager and the unique this was it played fine on the Mac. Now when I try and duplicate this it fails to work, I have no idea why now. Any ideas?
I am currently designing a project in Indesign and need to place the Multimedia content within the design for Online Distribution.
Note that in Acrobat Pro 9.3.1 the Multimedia components do not allow for embedding the content in a Flash Element or Video Element on the PDF. It will refuse to recognize that format. I have copied the YouTube Embed Tags in the video and flash multimedia componetns with ZERO success, it always states that it is an unknown format. Placing Audio into the PDF works fine though. The only issue is that player looks strange till you select it the first time. (would like to resolve that as well)
Any assistance would be appreciated.
Note: PC Xp Software fully updated to latest builds, Acrobat 9.3.1 on Both MacOSX and XP Systems, Both MacOSX & XP have latest versions of Flash Player.
Regards,
Robert
I am going to attach the file that was made for me showcasing that the video works on a Mac.
The file is called: ByBrianForRobertWorksinMacOSX
The next file I made on my Windows Xp Vmware with a trial of Acrobat Pro 9.3.1 - When I load it on the PC it works fine, but in the Mac it just states its buffering. The video is in pdf on the upper left corner under the text.

Solution: install all fonts
When the user installs Acrobat, they must use the Custom installation option and select
View Adobe PDF
     Asian Language Support
         Japanese Language Support
         Traditional Chinese Language Support
         Simplified Chinese Language Support
Create Adobe PDF
    Asian Language Support

2010 i5 MBP USB Ports Not The Same? Griffin iMic Issue

I have a 2010 15" i5 MBP. I got one of the white iMics and it works fine on the port thats closest to the screen. However, when I plug it in to the port that's closer to the SD slot, it doesn't work. Under the audio settings screen, I see the iMic under Input, and the slider is to the right, but the VU meter doesn't register anything. However, when it's in the USB port by the power adapter, it works as it should.
I have read that certain model MBPs have USB ports that are not the same, and some people have problems with programs like Serato when it's plugged into the front port. Traktor and Serato have even mentioned that on the MBP there is one "good" port and one "bad" port.
Curious if anyone else noticed this. Again, it seems to only affect 2010 i5 MBPs.

Hi WebBrowser2,
As I understand your query its not a single doubt you are having at all, actually it’s a bunch of multiple doubt you are carrying here in your mind allied to Mac Book Pro (USB Ports are not working). There might be various reasons behind- not working of USB ports in Mac Book Pro, as you already had searched out various ways to fix all your issues. A few months ago, I faced the same issue as my USB port was suddenly stopped to respond, then I also tried to find various ways to get rid of this issue, and I found an informative blog link which has fixed this issue and make me tension free.
For more information visit at- http://www.olmtopsts.com/blogs/when-macbook-pro-usb-ports-not-working.html
And I am hoping- it will assist you in the same way as it assists me.

Printer cannot connect with the Laptop - IP address are the same which is the issue

I have a HP Photosmart All in One printer that is connected to a desktop wirelessly and it works effectively on the desktop. I had it connected to a laptop as well. It stopped working one day with the laptop and has not worked since. It continues to work with the desktop. I have uninstalled/reinstalled the installation on the laptop, still does not work. When I go to connect the laptop to the network and put in the IP address it says "The IP address entered is currently being used by this computer. Please confirm that your printer actually has this IP address or enter the correct address below and click search" I have checked, double checked and tripled checked and it is the IP address that I got from the printer. Same issue comes up with using the Host name. Can anyone provide me with a solution? Thank you!!

Hi, Please give printer a FIX IP address, say from 200 to 254 and it will stay. Your other devices (phones, tablets ... ) including computers can use other addresses from 2 to 199 or from 1 to 199. Regards.

Two Fx 4 windows open at the same time causes usability issues

When I load two instances of Firefox, I get multiple issues with the second instance usability, display, and hot keys.
The issues are as follows:
# Menubar/Toolbar appear differently
# Back/Forward buttons do not work
# F-Keys no longer Function
# Favicons show old, cached icons
Please see screen grab of my two monitors with two instances of Fx 4 open, but the I played with my toolbar settings to get it to look somewhat ok.
http://www.travellingwebguy.com/images/Fx-4.png
This is what happens when I open a second window, and do not mess with the toolbars:
http://www.travellingwebguy.com/images/Fx-4-2nd-window.png
This issue was not happening with Fx 3.x.x.
I am using a custom Persona, but I have changed the Persona a few times and I still get the same result.
I've removed all incompatible extensions and upgraded all the ones that needed upgrading.
Not sure what the issue is here, but would love to troubleshoot it down if possible. Please let me know if any other info is required!
Cheers
Tim

Exact same issue here. Also, the add-on manger will not launch.
I thought it might be an add-on causing these issues, but only one out of my ten or so addons work in FF4, and I disabled it with no success.
This is a huge issue for me. I attempted to uninstall FF4 and go back to FF3 but I can't find an install file for FF3.

2 ATV in same house? Any issues

Hi,
I have a ATV in the family room and love it! So much so I want to install one in the garage to look at pictures and listen to my music.
Any issues with two ATV's on the same network?
Thanks

I have 3 running currently hosted by the same ITUNES server. When I talked with the Mothership tech support they said there was no limit that they knew of and had 14 currently running off one ITUNES host.

LUMIA 800 Epic cosmetic issues

I've came across an issue with my polycarbonate LUMIA 800. As I've removed the original casing that comes with the LUMIA 800, I realised the layer of "DIRT" on the phone. I've attempted to clean it off with soap and water but it cant be removed.
The LUMIA 800 comes with a silicone casing and I'm suspecting it is ruined by the given silicone casing that was bundled with the phone. The purpose of putting the silicone casing is to protect, not ruin the beautiful cosmetic matt black surface.
You guys had this issue? Those who had the used the bundled silicone casing can probably take it out and take a look!
I've already surfaced the problem since 2 weeks ago and am still waiting for NOKIA Singapore's reply.

I would advicw you not to worry about it so much. I've been using the case for almost 5 months now, since launch.
Agreed, when you take out the case, the body looks really bad n the stains dont go even after a lot of cleaning. However, leave it without the cover for a day or two and it regains its original clean texture. I'm guessing it gets polished while moving around in your pockets or something.

IdeaPad U430 cosmetic issues

I found a used U430 online for only $320 USD, but these are the listed physical problems:
Dent on left palm rest and separation on front and right sides, Scratches and wear on top and bottom covers, Dent and separation on bottom cover, Scratches on LCD bezel and hinge
There are no pictures listed but its from a trusted site. What do you guys think? First of all, it would obviously have no warranty, so Lenovo wouldn't be able to repair it right? If not, do you think it would be fine to Gorilla Glue the separated parts back? I'm not worried about the dents at all, just the separation. Those problems seem kind of major (it says it's fully functional and only cosmetic) but they're knocking off hundreds of dollars for it. Is it worth it?

Good afternoon and welcome to the community.
I think what would concern me most about the machine you describe is: How were the dents and separations caused? To me, it reads more like abuse, vs cosmetic damage.
Just for the sake of comparison, you might wish to browse through the Lenovo Outlet: http://outlet.lenovo.com/outlet_us/laptops/#/?page-index=1 to see if anything matches your feature set requirements and price point.
In my experience, machines listed as "Refurbished" have all appeared as new to my eye. They also come with a one year warranty, I believe.
Hope this helps a bit.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Same apple id contact issue

i dont check these updates often. multiple users on same apple id having trouble with contact merger. i have the answer for my set up. 2 users one apple ID ....on a macbook, iphone 4s(2 cells), and 1 ipad. have the 2 different users set up as 2 contacts set ups on address book. open address book on mac. then open contacts on iphone/ipad. have macbook(with prevent auto sync checked off before connection to mac book:its in itunes settings)connect device then open itunes . let device set up.it will not sync.. be sure to have ,in info section, sync contacts with(selected groups whatever user it is at time.. and also add contacts created outside of groups on this "device" to same contact group).. sync device one time. watch what is posted as sync occurs on top of itunes page...if u do not see (i never do) "contact sync" ,let process finish... then sync again. u should see contact sync at this time. now u should see(as i do) contacts sync.. for the 1 user should be merged from mac to device and device to the mac for only the 1 user only. no smash up of contacts between 2 users. i do not have icloud for the 2 users as this will mash the contacts as well. hope this helps someone

This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by going to Settings>iCloud>Storage>Manage Storage, tap your device under Backups, then tap Delete Backup and choose Turn Off & Delete at the prompt. Then go to Settings>iCloud>Backup and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

Cosmetic issue in WEBI report while creating on top of BEX query

While Creating WEBI report on tob of BEX Query, it is displaying both Technical names and descriptions at webi design level.
The infoobjects we had used in BEx Query is Navigation Attributes.
In case if we are using normal Infoobjects, we can able to restrict as per my requirement like uniqe name, description or both.
In this webi report user(Power user) having flexibility to drag and drop available characteristics.
Due to this issue column heading is displaying both technical name and description. For example Customer(ZCUSTOMER)

How come , if it is display for data means it also need to be display for header (Dimension also).
you can try alternatively in webi by creating variable for that Iobj .
Refer below blog provide details:
BOBJ Tricks: Toggle the Display of Text and Key in Webi
Regards,
Seshu.P

I am having the same slowness, irratic, unstable issues with Thunderbird that I had 9 months ago. T-bird worked fine last sunday but now is unstable,

Slow to download email, slow to respond or open email, slow or unable to delete email, "A script on this page may be busy....error message when trying to delete an email. I had similar problems before (9 mo ago) but they went away after dealing with McAfee. Thunderbird worked fine last sunday but when I tried to use it today I now have all these problems.

McAfee has been causing problems again this week, so the remedy remains the same:
https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee

Export for iPhone & iPad same time - Without resolution issues?

Hello,
I have developed an app for the iPhone and it runs perfectly fine on the iOS for iPhone. I am trying to port it to the iPad so I have done the proper stage adjustments and have set export as "iPhone & iPad"
It opens up fine on my iPad, but the same app opens distorted on my iPhone (since the stage resolution isn't native, so it gets squished)
How can I make my app iPhone/iPad friendly all in one IPA?
Thanks.

Use the same iphone version without any change on the stage and publish it for Iphone/Ipad with full screen parameter.

Same regionheights "a cosmetic issue"

Similar Messages

Maybe you are looking for