SAP CRM Client Problems or dependencies for Z Nodes

Hi Experts,
I am getting output successfully in my development client. But when I transfer the request from development client to testing client I am getting error mentioned above.
However after copy the request from development client to testing client, I am able find the changes in testing clientu2019s SAP GUI (component workbench-configuration).
I created enhancement for Z field creation. But here Standard or default configuration or Custom configurations are not showing Z fields when I click on u2018show Available Fieldsu2019 link. But those Z attributes are appearing in View Structureu2019s node. However these attributes are not generating methods. (I posted this question with subject u2018CRM 7.0 (BSP_WD_CMPWB) problems u2019)
To overcome the issue I created Z node with BOL entry.
Now I am able see my Zfields in Z node at configuration.
I added and I did some coding for event handler.
I am getting an error on browser(after copying the request from deve to testing client) given below
Cannot display view BT137I_SCN/Details of UI Component BT137I_SCN
An exception has occurred
Exception Class      CX_BSP_INV_ATTR_NAME - BSP exception: An attribute with the name "ZBTADMINI" is not defined
Method:      CL_BSP_PAGE_BASE=>IF_BSP_PAGE~GET_ATTRIBUTE
Source Text Row:      17
Is there any client dependencies are to take care to get successful results?
Please suggest me to move further.
Thanks
Sameera

Sameera
Just to chime in the most common issue when going beyond dev to test with CRM webclient UI is making sure your enhancement set is assigned to the client in test.
Now please keep in mind you have to maintain BSPWDV_EHSET_ASG specifically in each system instance because you can't transport entries(client is not the key of the table !!!).
This thread here explains that I even found this frustated and a pain when I first started with CRM webclient UI. It proves that even moderators are mere mortals lol.
https://forums.sdn.sap.com/click.jspa?searchID=26769172&messageID=5179852
This problem probably needs a wiki entry along with a SAP Note.
If this is not in the wiki I will add in it later or you can.
Take care,
Stephen

Similar Messages

SAP EHP1 for SAP CRM 7.0 : RKT Workshop for Interaction Center

Hi Everyone,
Please be advised that SAP is hosting a workshop in San Francisco, July 15 - 16:
SAP Enhancement Package 1 for SAP CRM 7.0 : Ramp-Up Knowledge Transfer Workshop for Interaction Center.
Click here for details or to apply:
[https://websmp208.sap-ag.de/~sapidb/011000358700000643542009E]
Best regards,
John

Hi,
First - the basic post installation steps are:
1. sick t-code need to execute
2. se06 --> Perform Post-Installation Actions
3. RZ10 --> Utilities --> Import profiles --> Of active servers
4. execute sgen T-code --> This will take some time
5. setup STMS
6. create client (If custom required)
7. Take backup of the system
For the solution manager client you could use the default created '001' client.
Next you need to run the solman_setup template which 'sets up' the SolMan for usage.
Follow config guide at: https://service.sap.com/~sapidb/011000358700000308502009E.PDF
For installing the ECC system, only a install key(from SMSY) is to be generated from SolMan. But if you want to use the SolMan effectively, suggest you to run the entire solman_setup.
Regards,
Srikishan

Sap crm 7.0 Browser settings for explorer 6.0 and Mozila Fire fox 6.0

In web Ui, when ever i try to create a new opportunity, Quotation, Sales agreement or order, I am getting an error in brower. in a popup :
An error has occured in the script on this page
Error: Oject doesnt support this property or method or Invalid Argument in Explorer 6.0.
I tried installing Mozila to check whether this is a browser issue, But there also
error is This website, does not supply ownership information connection is not encrypted.
I have tried changing the settings in Explore 6.0 to enable the following
1. Click the Security tab
2. In the resulting window, click the Custom Level button to open the Active X settings.
3. Under ActiveX controls and plug-ins the settings should be:
4. Automatic prompting for ActiveX controls: Enable
5. Binary and script behaviors: Enable
6. Download signed ActiveX controls: Prompt
7. Download unsigned ActiveX controls: Prompt
8.Initialize and script ActiveX controls not marked safe: Prompt
9.Run ActiveX controls and plug-ins: Enable
10.Script ActiveX controls marked safe for scripting: Enable
11.Under Downloads the settings should be:
12.Automatic prompting for file downloads: Enable
13.File Download: Enable
14.Click Ok to close the window.
Still same issue persist, Please help to resolve this issue

Hi,
I have tried this adding the SAP crm to the popup blocker, still the error is there. any other input to make this IE 6 work.
Still the same error : Internet exploer script error
Line :163, Char 1, Error : object doesnt support this property or method., code : 0
Line :77, Char :89,Error : invalid argument.
I tried installing Fire fox to test : but in fire fox also i am encountering this error:
This website does not supply identity information. Your connection to this website is not encrypted.
Technical details : Connection not encrypted. the website does not support encryption for the page you are veiwing.
Information sent over internet without encryption can be seen by other people while it is in transit.
I have tried this with internet explorer6.0, but no progress:
If the issue persists, follow these steps:
1. Close all instances of Internet Explorer.
2. Click Start, click Control Panel, and then double-click Internet Options.
3. Click the Advanced tab.
4. Under Browsing, click to clear the Enable third-party browser extensions (requires restart) check box.
5. Restart Internet Explorer.
If the issue persists, follow these steps:
1. Open Internet Explorer.
2. Click Tools, and click Internet Options.
3. Click the Advanced tab.
4. Under Browsing, click to select the Disable Script Debugging check box.
5. Click OK to close all windows, and then restart the computer.
Please help to resolve this issue
Edited by: Karthik J on Oct 6, 2011 10:50 AM

Problem building dependencies for pll

Hi all,
What may be the cause of the problem like this when building dependencies for pll module:
Failed to load lib
oracle.forms.jdapi.JdapiException: Failed to load lib
     at oracle.forms.jdapi.BaseAPI._jni_load_plsqllib(Native Method)
     at oracle.forms.jdapi.PlsqlModule.open(Unknown Source)
     at oracle.forms.jdapi.PlsqlModule.open(Unknown Source)
     at oracle.des.ia.parser.library.PLLParser.parse(PLLParser.java:77)
     at oracle.des.ia.AnalysisTool.executeParser(AnalysisTool.java:1745)
     at oracle.des.ia.AnalysisTool.process(AnalysisTool.java:1319)
     at oracle.des.ia.AnalysisTool.process(AnalysisTool.java:992)
     at oracle.repos.tools.dependency.manager.framework.DependencyAnalyzer.parseObject(DependencyAnalyzer.java:527)
     at oracle.repos.tools.dependency.manager.framework.DependencyAnalyzer.analyzeUsing(DependencyAnalyzer.java:383)
     at oracle.repos.tools.dependency.manager.framework.DependencyAnalyzer.analyzeUsing(DependencyAnalyzer.java:306)
     at oracle.repos.tools.dependency.manager.framework.DependencyAnalyzer.analyze(DependencyAnalyzer.java:278)
     at oracle.repos.tools.dependency.manager.dialog.AnalyzeDialog$4.runImpl(AnalyzeDialog.java:652)
     at oracle.repos.tools.dependency.manager.adapter.RunnableErrAdapter.run(RunnableErrAdapter.java:17)
     at java.lang.Thread.run(Thread.java:536)
I'm using Oracle Repository 6.5.95.4.10

Goto the following link:
http://www.oracle.com/technology/documentation/forms/902docs/9021comp_rn_u_forms.pdf
see section: 4.11.3

SAP CRM middleware problem (sysfail ) The current application has triggered a termination with short dump

i'm having a proplem during starting initial load although i'm using the best practice documents C71 and B09 and all the configration was done by them .... could any one help ??

this is the first dump error for my RFCUSER on the ECC server
Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_X
ABAP Program           SAPLCRMC
Application Component CA
Date and Time          05.03.2014 17:50:47
Short Text
     The current application has triggered a termination with a short dump.
What happened?
     The current application program has detected a situation that should
     not occur. A termination with short dump has therefore been triggered
     by the key word MESSAGE (type X).
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
Error analysis
    Short text of the error message:
    See SAP Note 1498111
    Long text of the error message:
     Diagnosis
     System Response
     Procedure
         Refer to the SAP Note that was mentioned.
     Procedure for System Administration
    Technical information about the message:
    Message class....... C_
    Number.............. 330
    Variable 1.......... 1498111
    Variable 2..........
    Variable 3..........
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occurs in a non-modfied SAP program, you might be able to
    find a solution in the SAP Notes system. If you have access to the SAP
    Notes system, check there first using the following keywords:
    "MESSAGE_TYPE_X"
    "SAPLCRMC" bzw. LCRMCF0C
    "CHECK_CRMATAB"
    If you cannot solve the problem yourself, please send the following
    information to SAP:
    1. This description of the problem (short dump)
    To do this, choose System -> List -> Save -> Local File (unconverted)
    on the screen you are in now.
    2. A suitable system log
    To do this, call the system log in transaction SM21. Restrict the time
    interval to ten minutes before the short dump and five minutes after
    it. In the display, choose System -> List -> Save -> Local File
    (unconverted).
3. If these are programs of your own, or modified SAP programs: Source
code of these programs
To do this, choose More Utilities -> Upload/Download -> Download in
the Editor.
4. Details regarding the conditions under which the error occurred or
which actions and input caused the error.
thanks

SAP CRM Tables and Fields for Contract start and End dates

Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja

correction
10 Replies Latest reply: 24 May, 2013 8:38 AM by nishant Vasudev
Tweet
SAP CRM Tables and Fields for Contract start and End dates
This question has been Answered.
Teja Dhar 12 Oct, 2009 8:03 PM
Currently Being Moderated
Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja
Correct Answer by Sreekantha Gorla on Oct 22, 2009 8:22 PM
Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
<:footer>See the answer in context
6281 Views
Topics: Customer Relationship Management
Reply
Average User Rating
0
(0 ratings)
My Rating:
Rating Saved!
Comment on your rating
Re: SAP CRM Tables and Fields for Contract start and End dates
Robert Jesionowski 14 Oct, 2009 2:23 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
you should try with FM: CRM_DATES_READ_SINGLE_OB or CRM_DATES_READ_DB.
There is something in table SCAPPT and SCGENAPPT.
Regards, R
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:30 PM (in response to Robert Jesionowski)
Currently Being Moderated
    Hi Robert,
I am not able to find contract start date and End dates in the tables SCAPPT and SCGENAPPT.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 2:35 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
Table SCAPPTSEG stores the contract start and end dates.
Thanks,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:32 PM (in response to Sreekantha Gorla)
Currently Being Moderated
    Hi Sreekanth,
I am not able to find contract start date and End dates in the table SCAPPTSEG.This is for appointments.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Correct AnswerRe: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 8:22 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Wim Olieman 23 Oct, 2009 9:12 AM (in response to Sreekantha Gorla)
Currently Being Moderated
    Hi,
I can tell you where the pricing records are saved, replicated from ECC.
The data from ECC table Axxx (e.g. A304) is replicated to CRM table
CNCCRMPRSAPxxx (e.g. CNCCRMPRSAP304).
Here you can find fields TIMESTAMP_TO and TIMESTAMP_FROM.
About the dates: what Sreekantha Gorla stated, about table 'SCAPPTSEG' is correct.
What might help is to execute program "CRM_ORDER_READ". Here you can find
the relevant entries also.
regards,
Wim
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 23 Oct, 2009 4:59 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi Experts,
Thanks a lot for your support.My problem got resolved.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
rajesh gadamsetty 27 Nov, 2009 12:29 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi Teja
Please let me know how you got the dates. i got the same requirement
Report Abuse
Like (0)
Reply
Correction on above mail.
Hi Sanjay,
Can you please help me to find the contract st art date and end date fetching from the table as below
ITEM DATES:
Select guid_set from table CRMD_LINK where guid_hi              = CRMD_ORDER_I-GUID AND
                                                                          OBJTYPE_HI     = '06'
                                                                          OBJTYPE_SET = '30'.
Select * from SCAPPTSEG where APPL_GUID = guid_set.
as from the table scapptseg has some unusal fields which fields to select to get the start date and end date and on what condition and isuppose we need to convert als the same
pls suggest further on same
regards
Arora

Guideline Performance Initial Download from SAP for Utility into SAP CRM

Hello,
Please find below a link (valid for 10 weeks) to the document Guideline Performance Initial Download from SAP for Utilities into SAP CRM. The document is also published in the SAP Service Market Place at http://service.sap.com/utilities. Then choose Technical Information Center - Migration.
The purpose of the document is to give guidelines as well as to share experience for an efficient and high performance execution of an initial download from an SAP for Utilities system to an SAP CRM system, such as:
- Configuration of the initial download
- Ensure optimum performance for the initial download of the relevant business objects
- Avoid unnecessary business data being downloaded
- Monitoring of the initial download and taking corrective actions in case of problems
- Handle errors occurring during the initial download of business objects
- Minimize performance bottlenecks
The document explains the setup and configuration of the SAP for Utilities and SAP CRM systems only if necessary for the understanding of the solution of a described performance problem. This document does not cover the performance optimization of the delta down- and upload and the synchronization download.
The document has the following structure:
Chapter 1 describes the basics of an initial download
Chapter 2 describes how to plan and execute tests to achieve an acceptable performance
Chapter 3 describes the most important technical activities to prepare the involved systems
Chapter 4 describes the most important functional activities to prepare the involved system
Chapter 5 describes how to perform an initial download
Chapter 6 describes measures to improve the performance of an initial download
Chapter 7 provides a list of important repository tables
Chapter 8 contains a list of important SAP Notes related to initial download
I'd highly appreciate your valuable feedback on this document.
Kind regards,
Fritz
Edited by: William Eastman on Feb 17, 2011 2:34 PM

Hi Fritz,
sorry for the late late reply but I didn't notice your answer.
Here are my answers:
(1) I monitored the behaviour on the CRM system, CRM 7.0, SP5
(2) The change should be implemented in the CRM system
(3) Deactivate buffering for scenarios marketing, sale and service via SM30 and table T770MATTR.
By doing this the initial load of 3.2 million business agreements took around 2 hours, with activated scenario buffering I was at least ten times slower.
After the initial load you have to activate the buffering again.
Interesting to know would be why the scenario buffering only affects the initial load of business agreements and no other object. As far as I know the scenario buffering is relevant for the organizational management.
Regards
Alexander

Moving OTC processes from SAP R/3 into SAP CRM 5.0

Hi all,
A SAP CRM client that I am currently working on have decided to extend the project scope and now want to move all their existing OTC processes from R/3 to CRM 5.0. Their system is heavily bespoked with a high level of user exits, as during the initial implementation they preferred to use more ABAP than config although some of the functionality was available as standard. If they havent figured it out yet, Im sure theyll be asking themselves soon whose clever idea that was. They have over 1m customer records with a low transaction volume per customer per year, configurable products, complex pricing and use Biller Direct, just to mention a few.
Has anyone got any experience in doing this previously? Any issues, challenges or lessions learnt apart from the obvious ones?
Thanks!
J

Seshu Mannepalli wrote:
> As part of the upgrade we are going to do initial upgrade in the mock server and vendor is going to provide mock server with AIX 7.1 O/S. Current database size is 100GB, hence we are going to copy the production server data into the mock server using export and import method,
>
> Here my doubt is can i install db9.7 directly and do the import (using compitable kernel)?, insteady of installing source database version 8.1 and later upgrading to db2 9.7 . Please clarify me whether can i go head and install the db2 9.7 and do the system copy using R3load.
Hello,
You can go ahead for IMPORT with DB 9.7.
We completed an OS/DB Migration Project (which involves system copy using EXPORT/IMPORT) and we utilized direct newer version of DB2 on the target during IMPORT.
But please confirm whether the kernel of your release would work fine with DB 9.7 or not. Otherwise, there is no problem in going for higher version of DB2 here.
Small question - Why you want to test the Mock Upgrade on DB2 version which is different than the current version on production server ? Or are you planning to upgrade your current DB2 8 to DB2 9.7 BEFORE the SAP Upgrade on all the servers - then the testing is OK I think (however OS is still the different - Or may be you will go for system copies for this too !)
Thanks

Sales orders, vendor determination in SAP CRM vs CRM E-Commerce?

Hello,
We are creating Sales Order through SAP CRM E-Commerce B2B scenario.
We noticed that vendor is determined at header level but not at item.
If we create a Sales Order in SAP UI (tx: CRMD_BUS2000115) (same transaction type used by B2B) with the same data Vendor is determined at header and at item.
Any idea?
Best Regards

Hello Folks,
I Have many years implementing IBM Net.Commerce and Websphere Commerce Suite, and 3 years with SAP CRM. What I can tell you:
IBM Sol. has less tables than SAP. It´s much easier to extend the Database.
In terms of catalog management IBM Solution, it´s not good. There´s a web interface do administer it. Very hard. There´s the option to use the massimport utiity. Same thing as Batch input of SAP.
Integration to third party solutions for IBM product, it´s hard. Have to use WBI, or decompile java kernel. For SAP is easier, depending of what you need.
Both solutions work with B2B and B2C, plus IBM working with dutch, reverse and normal auctions.
IBM can work with mobile but you need to acquire the everyplace solution suite. SAP CRM can work with integration for handhelds, naturally, just configure it.
Now the point where it´s very hard really: Taxes and deliveries. SAP has localization for almost every countries around the world. IBM just works fine for USA and Canadá.
For the pricing procedure, SAP, indeed is much better.
Conection with third party delivery companies, like Fedex, UPS or DHL, both don´t have it. Including taxes, except IBM for USA and Canadá, how told you before.
For materials, SAP has a much better implementation, to work with products, itens, services, and so on. IBM has infinite number co categorize a product, and products can have a limited number of attributes. For example a blue and pink pant. Color is an attribute for sap.
For user, IBM has something named non stop shop, where is possible to buy something without a full registration. In SAP, yu have to register entirely.
About visual Design, for both you must respect the JSP, or BSP, in front-end, for IBM and SAP solutions. Don´t leave it on hand of the webdesigner.
The learning curve for learning both are long.
Well there are the points... If you need something else, contact me.
regards,
Luiz David

SAP ECC 6.0 Service functionalities vs. SAP CRM Service functionalities

Hi all,
My name is Chitra. I want to make a comparison between the Service functinalities available in SAP CRM Service. I beleieve SAP CRM has lot more functionalities for Service than SAP ECC. But since I have not worked in Service, I would really appreciate any help in this regard. What are the Service options available in ECC 6.0 . What are the additional functionalities available in SAP CRM Service. Any help in this regard will be very helpful.
You can email me at [email protected]
Thanks in advance,
Chitra

Hello Chitra,
I know it was a long time ago since you posted this thread, but I was wandering if you (or anyone reading the forum) ever got the information requested for comparing CRM Service to SAP ECC Service. I have a similiar requirement for comparing both options.
Your help would be truly helpful,
Many thanks in advance,
Pedro

How to read Business partner attachment in SAP-CRM

Hi Experts,
I am working in SAP CRM, i am uploading attachments for Business partner through T-code : BP. My requirement is to read the attachment of the particular business partner in the form binary or XML. Please suggest some BAPI for class to read the attachment of business partner.
Thanks and Regards,
Peter Dinesh.

Class CL_CRM_DOCUMENTS is the one that manages everything with attachments in BP transaction

Forwarded successfully the workitem for BO-BUS2000220(complaint) in the worklist of other user: Problem in "Sent date" not reflecting correctly in SAP CRM 7.0 Web UI

I am working with SAP CRM 7.0. We have a workflow in the system which is triggered at the creation of complaint(BO:BUS2000220) and then assign the complaint workitem
in the woklist of specified agent. I have created a report and scheduled it daily to forward the complaint into the worklist of user B from worklist of user A after 7 days
from creation date of complaint. But the problem is that the forwarded complaint is showing in the worklist of user B with sent date(the creation date of complaint, not the
forwarded date).
Relevant code:
IF gw_complain-PROCESS_TYPE = 'ZCMS' AND age_complaint = 8.
          CALL FUNCTION 'SAP_WAPI_WORKITEMS_TO_OBJECT'
           EXPORTING
objtype         = 'BUS2000120'
objkey          = obj_guid_key
top_level_items = ' '
SELECTION_STATUS_VARIANT       = 0001
           IMPORTING
return_code     = return_code
           TABLES
worklist        = it_worklist[].
READ TABLE it_worklist INTO wa_worklist WITH KEY wi_type = 'W'.
CALL FUNCTION 'SAP_WAPI_FORWARD_WORKITEM'
            EXPORTING
workitem_id    = wa_worklist-wi_id
              USER_ID        = wa_worklist_esc-ESC_USER
LANGUAGE       = SY-LANGU
DO_COMMIT      = 'X'
CURRENT_USER   = wa_worklist_esc-CURRENT_USER
            IMPORTING
RETURN_CODE    = lv_return_code
            TABLES
MESSAGE_LINES = lv_mesg
* MESSAGE_STRUCT =
* USER_IDS       =
ENDIF.
Can someone help me how to change the sent date to actual forwarded date of complaint.

Hi Kavita,
There is a standard column in UWL with name 'Sent Date'. Other functionalities in UWL for example deadline monitoring (Due date column) are based on this sent date. This shows an employee what was the date workitem was created (sent date) and when it will get escalated (due date). Displaying forwarding date in Sent date will not give clear picture to employee as the deadline will be calculated based on sent date only not based on forwarding date. this was just an example.
even though if your client is insisting, i dont think it can be done without any enhancement in UWL web dynpro com sort of thing. you can check with your portal consultant too.
Regards,
Ibrahim

S_DEVELOP authorization needed for CRM Web Client in SAP CRM 7.0?

We implemented an own WebUI component in SAP CRM 2007 and use it in others components (with USAGE).
After we transport the component in SAP CRM 7.0 we always got an error CX_BSP_DLC_CONFIG_GENERAL_ERR at loading the component. But if we set the permission to SAP_ALL all thing work fine.
In SAP Note Nr. 1367944 we read:
"It is not possible to run the CRM Web Client without the S_DEVELOP, activity=03
authorization because it is needed by the Web Client Framework.
The S_DEVELOP authorizatin is part of the SAP_CRM_UIU_FRAMEWORK PFCG role, which must
be assigned to every user."
"This dependency has been removed in CRM 7.0."
Do we need to install some other SAP Notes at SAP CRM 7.0?
Many thanks for advices!
Handri Gunawan

Hi Handri,
I asked my collegue here, who created the note.
The note is correct, in CRM 7.0 you do not need S_DEVELOP anymomre.
The error that you have might occur because of another reason.
Could you track the call stack of this exception?
And send me back the call stack?
Regards,
Steve

SAP CRM multiple clients possible

Hi,
We have a NetWeaver SAP CRM system (ABAP + JAVA) stack.
We run an internet webshop application on the JAVA stack connected to CRM ABAP stack, client 010. The CRM ABAP stack connects to SAP ERP.
Q1: Is it possible to add a new client 020 in the ABAP stack of the CRM system?
Q2: I don't understand in CRM the connection between the JAVA and ABAP stack. If I add a new ABAP client 020, do I need to copy the JAVA stack/client also?
Who can help me guiding in which direction I have to go?
Note: We want to connect a non-SAP system to client 020.
Overview:
ERP ABAP (client 010) --> CRM ABAP (client 010) --> CRM JAVA stack
non-SAP (legacy system) --> CRM ABAP (client 020) --> CRM JAVA stack
Q3: What are the problems (challenges) I can expect?

Hi Rene,
I think it is not supporting multiple clients. Wait for some additional replies.
Regards,
Ravindra

Launch CRM transaction through SAP Web Client UI

Hi,
We would like to incude transaction "S_AE2_89000019" from CRM to SAP CRM WEB Client UI.
We have done the following steps using the SAP best practices (C04-Configuration guide):
1. in transaction CRMS_IC_CROSS_SYS we have configured the CRM system with url: http://CRMnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
and ERP system with url
http://ERPnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
2. we have set TSTC to synchronous (CRM and ERP)
3. we have configured transaction launcher through wizard (tx CRMC_UI_ACTIONWZ)
4. we have created logical link for transaction and we assigned the link to work center and business role.
The problem is that when we are opening the SAP CRM web gui and click on the link that we have created, we take a blank picture with a red x "PLease wait..." and nothing else opens.
Can anyone help?
Thanks in advanced.

Hi,
please also check the information in this very good blog:
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4]
Kind regards
Manfred

SAP CRM Client Problems or dependencies for Z Nodes

Similar Messages

Maybe you are looking for