SDM has not calculated any deployment actions

Hello Colleagues,
i want to install an Microsoft JDBC 1.1 driver for the JDBC Adapter Engine.
After modifying the "aii_af_jmsproviderlib.sda" with required informations and adding "sgljdbc.jar" file i tryed to import the sda archive file at SDM but i got following error:
SDM has not calculated any deployment actions.
Possible reasons.
All selected archives have already been deployed before in the same or in a higher version.
I found an import under SDM Repository "com.sap.aii.af.imsproviderlib 3.0.320040609110635.0000"
What is to do?
Perhaps new version? How can i do it?
Many thanks in advance!
Regards,
Jochen

Hi Chilla,
the problem was related to a not correct selected radio button during SDM deployment.
You have to slect "Update deployed SDAs/SCAs that have any version" under tab "Deployment" during deplyoment.
Please look up on Page 4 at HowTo Guide "How To Install and Configure External Drivers for the JDBC & JMS Adapters" http://www.sdn.sap.com/irj/sdn/howtoguides
Many thanks for support!
Regards,
Jochen

Similar Messages

"Print report REKORD 80 has not selected any data for correspondence SAP18"

When executed FBCJ transaction click the "print cash journal" button then appears the following message "Print report REKORD 80 has not selected any data for correspondence SAP18"
What is the procedure for to fix error?
Best regards
John

HI,
John.
please refer the following link.
correspondence type
Regards,
satish

HT1725 42404 error after downloading itunes (20+ times!) can access the itunes store but can't do any downloads... itunes support has not offered any valid suggestions

42404 error after downloading itunes (20+ times!) can access the itunes store but can't do any downloads... itunes support has not offered any valid suggestions

This is EXACTLY what happened to me and many others. Tech support returned most of my money but not all of it. Figure that one out! It is clear no music is downloaded (or in queue), it is clear an unknown error message is produced, and it is clear we, the consumer, are still being charged anyway. Will Apple require a credit card from its customers and alienate those that do not wish to use a credit card? Will Apple insult its customers and make silly suggestions such as 'Use an iTunes gift card' in much the same way a forum moderator has already recommended?
I have an idea: Acknowledge the problem publicly (via email, for example) and fix it in a future update. Customers will be more understanding if they know there is a temporary problem and Apple is working hard to fix it. Oh, and return our money, please!
Windows XP Pro
Windows XP Pro

TS3991 does not open. i have deleted this app, and backed and restored and downloaded again but has not made any difference. Thanks.

Can any one help. How do i get my google app to open on my iphone? It just flashes up but does not open. I have deleted this app, and backed and restored and downloaded again but has not made any difference. Thanks.

Tap Settings > General > Reset > Reset All Settings
Then restart your iPad.
See if that makes a difference.

Content has not sent any info back to the LMS after the LMSInitialise

We created a content piece with Cpativate 3 and it looks like
the content has not sent any info back to the LMS after the
LMSInitialise. So as per the SCORM standards, the LMS marks it as
complete when the player window closes.
The content needs to send back a status of incomplete as soon
as it has done the LMSInitialise. The lesson_status = incomplete
was sent by the LMS to the content, not the other way round.
Is this because the content was delaying sending back a
lesson_status of incomplete to the LMS, so the LMS was just marking
it as complete if the content was closed too early.
If anyone has had a similar issue like this and discovered a
fix, please let me know.
Regards,
Ryan

Hi Andrew,
Thanks for the reply. We are using Saba and they have fed
back to me that they have experienced problems before using
Captivate. I am currently trying a few different settings to see if
it is on my end. I will forwqard the piece onto you soon.

Some clients do not get software deployment, actions missing after OSD

We have Win7 SP1 x64 rollout going on from XP, a refresh scanario on ConfMgr 2012 SP1 non-CU site server. Our testing phase went fine with 100% success, but just before starting rolling, I approved updates November 2013 - January 2014 and did too
quick test. So there was lot of issues, after that I had to disable those patches during OSD and let them be deployed via Software Center, after OSD.
Still, about 10% clients comes out with missing actions in ConfMgr client, or/and do not get desktop deployment software. We have 2 additional apps comming up to to user profile, so after first logon these 2 apps gets installed. And in 10% this does not
happend.
- bounderies are fine, client location .log is clear.
- usually ccmsetup /install -> reboot -> ccmsetup install with MP paraments solves the problem, but not always. It´s also too slow solution
- I noticed, that in this enviroment, the 3rd scheduled task called "Configuration Manager Maintenance" is missing. I only see Idle and health eval. I had similar case in my lab with R2, and that maintanced task fixed my client with missing in
10 minutes!
- our guys who installs Computers, claim that this behavior is seen more with refresh TS rather than with PXE boot - new machine scannario.
- there are additional role based applications with required deployments, and they do not appear, even if the actions are fixed
Any hints what to do? I would like to avoid upgrading site server to R2 or updating it during active rollout.

Skywalker - I agree, solving Software Updates issues in OSD is a challenge. It´s shooting ducks to figure what KB fix breakes the OSD hook. Recapturing .wim in a middle of a rollout is not the option here, but you´re right. In other side,
if patches breakes OSD during deployment and install software update step, it´s no guarantee the capture will solve your problems. I will check the registery, didn´t know that before. I have my suspesious, that TS might not finnish properly, though there is
no errors. MDT brings lot of more logs and status messages, so solving this isn´t easy.
Torsten - sometimes, waiting for hours, rebooting, killing and restarting prosess isn´t enough. Even if all actions are precent. Also, in a real life users can´t wait for hours. I´m very keen do understand, why there is no 3rd schduled task
of maintance.

Adapter has not provided any status information about this channel

Hi Team
We are facing a weird issue in sender MAIL adapter. We are using POP3 for reading the emails. The adapter runs fine and some time say once in a month it goes in error status with the below error
Once we stop and start the channel, it starts working again.
I have searched in SCN but did not find any helpful clue.
Can you please help me to find out the root cause of this problem.

Hi Hareesh
Checked the NWA logs but did not found anything for mail adapter.
I haven't restart the XPI Adapter: Mail. Just curious to find out why it happens??

HT2500 I have just bought a new Mac Air. I am usually a PC user. It has not brought any emails in for the past two days. (My husband picked it up from the Apple shop 2 days ago and it has the emails from when the apple store had it) but not the past 2 day

I have just bought a MacAir. The Mac shop moved my data over two days ago and my husband picked it up. The apple shop down loaded my emails up until 2 days ago. But I have just started the computer and it has not brought in emails from the past 2 days. Can anyone advize me what to do? I am an Apple virgin after only ever using PCs.

Are you connected to an ISP? Have you set up your Mail preferences per your ISP's requirements?

A million pound fine for EE has not made any difference

EE were recently fined 1 million pounds for their poor handling of customer complaints. It doesn't seem to have had any effect. I have been the victim of identity fraud with someone buying a phone using my bank account details but delivered to an address in Birnmingham 42 miles away from where EE send me my bills. Even though EE acknowledge they know I have been the victim of fraud they have now passed my contact details to Buchanan Clark and Wellsa debt collection agency who say I owe EE/T-Mobile over £80. It is now over two months since I was told that the EE fraud dept would contact me but I stiill haven't heard from them. The details of the case are below..
What is equally annoying is that within a few days I will get a response from a moderator at EE to this post to suggest I contact customer services and that I should flag this up as an acceptable solution. I don't seem to have the facility to say that It is a far from acceptable solution. EE contacted me on the 6th of June to say they suspected fraudulent activity on my account. On the 19th of June my bank account was debited for £38.01 by an EE direct debit. I was unable to check my account until the 23rd of June when I notified EE (and my bank) of the fraudulent payment. They told me the Fraud Team would speak to me within 72 hours. The following day a delivery company phoned my son’s mobile to say they were unable to deliver an item of high value to an address in Birmingham which we have no connection with. I have never used my son's phone but I used to pay for it some years ago. This suggests to me that the fraudster has a connection to EE/Orange. Again I notified EE. I phoned again on the 29th of June to point out that the Fraud Team had still not been in touch and was told they would speak to me within a few days. I phoned again on the 3rd of July to register a complaint and was told I would be contacted by the Fraud Team within 7 days. I rang the Complaints department again on the 13th of July to be told for the first that the fraud dept required a recent bank statement but it wasn’t explained why no one from EE had ever asked me for one. I sent the recent statement that showed the fraudulent payment on the same day. I phoned the Complaints dept again (25th of July) but was only told that the Fraud dept were looking into it and would 'hopefully' be in touch.

The advice comes from a collection of advice across the forum that has worked for others, so based on this it's hard to say what that means. I guess it's a bad sign if it isn't listed there, as that means the player hasn't been detected.
Out of interest, are there any listed that feature "MTP" in the name?

My phone let me up date it say I have to sign in. I sign in then takes me payment type and won't except my card which has not changed any idea what's wrong ?????

Apple Id wont let me update my apps. It tells me to sign in then takes me to payment method and says card is wrong even though I have not changed anything. Any idea what I can do ????

Hi Kim ...
Might not just be the security code > iTunes Store: My credit card's security code or zip code does not match my bank's records
Apple "verifies" your billing credentials with every transaction.
what does my debit card have to do with my having a redeemed ITunes card
If the total purchase price of the media including any applicable taxes or fees exceeds the balance of the redeemed card, then the difference is charged to your debit or credit card account.
iTUNES STORE - TERMS AND CONDITIONS < re taxes and fees
You don't have to have a credit or debit account setup > Create an iTunes App Store account without a credit card

I purchased a one year license from my school and it stopped working within one year. It is asking for a key code. My school's tech center has not been any help. I purchased Adobe Acrobat XI from California State University, Los Angeles

I need a copy of the key code to use the product. It has stopped working.

This is generally a volume license and the key has to come from the school.

My daughter spent £69.99 on this app diamonds to send on her Disney fairy game, I wasn't to happy when I found this out she has not used any can I get a refund and how? Help

How would I get a refund for this?
Please help would mind if it was a few pound but 69.99 I can't do
Thanks

Open iTunes on the computer. Without any iPhone plugged in, go to iTunes' menu and do Store > Sign Out.
The click the iTunes Store row on the left of the iTunes display. You can then sign on from the signon row on the right side of the display using the correct Apple ID and password. Then you'll be all set!

HT4208 I would like to get started with my one on one instruction. Since receiving my MacBookAir there has not been any availably for booking appts.

I live in Houston, Texas and have tried 2 stores for the last 2 mos. There has been no availablitiy for help in working with my new laptop.
Could you reccomend a solution to this problem. My closest stores are the Galleria and Highland Village area.
thanks,
Miriam Portnoy

Why did you give your granddaughter the password?
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Flash player stopped working, followed threads, has not helped, any suggestions??

HI,
Im using vista home basic,on a note book i got last year. the flash player was working fine until last week, at that time i updated to ie 8 and flash 10.
The player hasnt worked since. The playback is very choppy, just a series of fotos realy. The settings dont respond. Also it freezes the page into wich it is embedded.and the rest of the system to a lesser extent. ihave followed the instructions about reinstalling and using the uninstaller, ensuring that i reboot inbetween. no difference. its a 32bitoperating system with 1gb of ram. I understand that flash wont work in 64bit ie, ive looked under the help on ie and as it doesnt mention that its 64 i understand that means it must be 32? ,,,,I realy hope you can help!!! going off on a bit of a tangent,,, but this 'failure' of flash is realy quite scary! it makes you realise just how entrenched it is in every day life! its like the end of civilisation! no facebook,,,no utube, no online news!!! helllllllllp!

hey thanks for reply,
Deep breath!!!
Ok these are the files that are in the flash folder.
flash10e.ocx
flashuntil 10e
install
uninstall active x
I opened the manage add ons, there is no mention of flash at all.
I deleted all my add on tool bars.
I did install firefox, hence all this trouble. when i decided to go back to ie. and reinstalled it,,,thats when all problems started.
Thanks
rich

I have imported a jpeg photo into iPhoto and cannot get the Places map to let me fix a position on the map. It remains disabled for my photo. Checking out the Help file has not given any solution.

I have imported a jpeg photo into iPhoto and cannot get the Places map tp show. I have tried the Help file and the information was not helpful. Can anyone give advice here?

I am using iPhoto 9.1.1. When I select thephoto, then Places I get the window (Places to lookup disabled). When I hit theInfo button I get the size an JPEG notification, and Faces and Key words. The “reverse” of thepicture shows a window with Rotate, Hide, Trash etc.
When I select Places, get the Google worldmap, and this case a pin on Sydney Australia showing that eighteen photos arecorrectly placed. I am unable to make the connection to San Francisco wherethis particular photo was taken on a very modern camera.
Regards,
Theogt

SDM has not calculated any deployment actions

Similar Messages

Maybe you are looking for