Selection screen option for Screen type like inDEMO_SEL_SCREEN_AS_SUBSCREEN

hello,
in this program there are 2 selection screens,called from MAIN screen.
DEMO_SEL_SCREEN_AS_SUBSCREEN
i want to create similar..
In main screen i will have 3 screens (which should have of screen type 'Selection screen ' ) and 1 BOX (in which I will have Table control)..
I created the main screen 0100 and 3 sub screens..(1001,1002,1003)
But when i want to create these I cannot choose Screen Type as 4 Selection screen (the other options are 1.normal 2.Subscreen 3 Modal dialog box)..
I have gone through other threads..they simply say its not possible..
then how was it done in DEMO_SEL_SCREEN_AS_SUBSCREEN..
Also i have seen Zprograms with 3 sub screens as Selection screen ...
Also interestingly the short description of this screen is
SEL_SCREEN 1100 INFO:140000140000000000000000000005490892784

Hi,
This code form teh same program creates them as selection screen.
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-010.
PARAMETERS: p1(10) TYPE c,
            p2(10) TYPE c,
            p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 1100.
SELECTION-SCREEN BEGIN OF SCREEN 1200 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-020.
PARAMETERS: q1(10) TYPE c OBLIGATORY,
            q2(10) TYPE c OBLIGATORY,
            q3(10) TYPE c OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF SCREEN 1200.
check this out:
[http://wiki.sdn.sap.com/wiki/display/ABAP/Select-OptionsinModulePoolProgramming]
Edited by: sap_wiz on Jun 23, 2011 1:33 PM

Similar Messages

When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Is there any print screen option in mac book like we have in other make notebooks

is there any print screen option in mac book like we have in other make notebooks

Make a screenshot:
CMD + SHIFT + 3 = whole screen
CMD + SHIFT + 4 = you can select a area
CMD + SHIFT + 4 and after that press space bar = select a window
That will take a screenshot to your Desktop. If you additionally hold down the CTRL key the picture is taken to the clipboard and could be pasted to a program (like Preview or Photoshop ...)

No split screen option for Nokia C7 Malaysian Prod...

No split screen option for Nokia C7 Malaysian Product even after complete and successful updates of all Symbian Anna files.
Mods, any updates or advice?

Great,...it will make chatting flow much smoother. Will I see the split window chats with the "My Conversations" app that came on my N8? Also,...I use Swype for my keyboard,..not for the swiping feature but for the larger keys that fit my big thumbs better. I noticed something about Swype in this thread. Does Swype cause any conflicts for the new split window chats. Thanks again for the assist !

Sometimes when i get out of the full screen option for a microsoft word document i lose my main toolbar (the toolbar with the minimize and escape buttons, etc. etc.)

Sometimes when i get out of the full screen option for a microsoft word document i lose my main toolbar (the toolbar with the minimize and escape buttons, etc. etc.)??

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Time constraint classes and screen number for absence type

Hi all,
What should be the Time constraint classes and screen number for absence type.
The different absence types are annual leave, sick leave , study leave , personal leave, maternity leave , juryduty leave nad leave without pay etc
Kindly help.
Regards,

The time constaint class depends on the client requirement.
eg.if they want that a error needs to be generated while overlapping absences or warning message is required.
Time contraints comprise the following:
Time constraint classes that determine which collisions in time data records are allowed
Time constraint table that contains the time-based collisions allowed in the time data records
Time constraint indicator that displays whether a new data record that collides with an existing time data record can be transferred to the system or whether the transfer is prohibited
For screen number you will have to see if the is quota based deduction or just an absence. Here is the documentation of screen number from SAP
In the standard system, the following numbers are allocated to the screens:
1. 2000 - General absence
This screen is used for all absences which do not require special processing (such as paid leave of absence for getting married).
2. 2001 - Quota deduction
This screen is used for entering data on leave or time in lieu of overtime.
3. 2002 - Work incapacity
Use this screen for all absence types where continued pay should be taken into account automatically by the system.
4. Special screens have been developed for the following absence types:
2003 - maternity protection, parental leave
2004 - military and non-military service
2005 - work incapacity (Netherlands)
Please go through the documentation of the configuration.
Shrikant Basarkar

How to set field "vendor" as optional for movement type 221

Hello experts, I want to set the field "Vendor"(LIFNR) as optional for movement type 221 when create reservation using T-code MB21. As far as I know, field selection of reservations is determined by the settings in the field selection(from201) of the movement type. But even when I have set the field "Vendor" as "optional" both in field selection (from 201) and field selection (Enjoy) for mvt 221 using T-code OMJJ, it is still not shown on the screen of creating reservation. Is it the SAP inside logic that restrict this field for movement type 221 or should I change any other settings elsewhere?
Any help will be highly appreciated.
Best regards!

Let me understand ,
u want to reserve stock with MB21 with optional for vendor code or name .
then against the reservation u was t to issue to cost centre or production with 201 rt .
If so hopefully this scenario excludes the normal production order process ( cozz their GI is w.r.t prd order only since reservation is created at backend and also shown in prod order).
ur req is normally for consumables or spares etc and u want o track the vendor also in the Reservation .
possible check is Movement type - screen in omjj
GL account variant settings
MB1a setting
last option - create a screen variant with SHDO tode and activate it .
all will be at client level so please

Changing screen size for screen sharing

Is there a way to change the screen size for screen sharing?
I have a 13" macbook and a G5 with a 20" monitor. When I use RDC to a PC it automatically adjusts to use the full screen on the G5 and when I use VNC to a linux system I can create a vncserver with any arbitrary geometry that I want, but when I use screen sharing all I seem to be able to get is a 13" screen. I can use JollysFast VNC, and view it full-screen, but it's still just 1280x800.
So, is there anyway to create a virtual window so that I can take better advantage the screen on my G5 when screen sharing to my macbook?
Thanks,
Rob

Well, the question should really have been, "What is the ideal page width for the iPad?".
The answer is that there isn't one since the iPad, like most portable devices, has two screen widths depending on whether its used in portrait or landscape mode.
If you are designing a layout specifically for the iPad, one solution is to use a folding design where the sidebar folds down to the bottom in portrait and jumps back up to the side in landscape. This will only work for personal computers and iPads.
The popular way of designing a layout to suit a large range of portable devices is to use a liquid, or semi liquid, layout that will automatically adjust to the fixed width browsers used on these devices.
Something like this...
Neither of these methods are possible using a template based editor like iWeb and this is probably one of the main reasons that Apple has given up on the application. Surfing the internet on mobile devices is growing daily and its now become essential to have a mobile version of your website or one that can be viewed on all devices.

How do I get blue/green screen option & split screen?

How do I get blue/green screen option & split screen? On iMovie, these options were presented to me, whenever I dragged a clip over another clip already in timeline. Where do I find these choices in Final Cut X ? Also, on iMovie, to resume project production, I would then hit the "done" button -- Where do I find a button to finalize changes? Also , where do I find the option of "precision editor" ? Thanks

Green screen is done with the Keyer effect.
There is no Done except for transformations in the viewer.
Double click an edit point to open the Precision Editor.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
To change the card, go to your account settings and change the information to your new card, and hit save.

Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01.

Dear Experts,
We have solution manger 7.0 ehp1 ,
ERP 6. 0 EHP4 Development server(seperate server) this is upgraded from erp 6.0 to erp 6.0 ehp4
I configured the maintenece optimzer also. and created the RFC destinations also it is working fine. For downloading the support packages In Miantenance optimizer I am getting the error.
Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01
I deleted the systems in SMSY and and recreated using the SLD refresh. Agin also I am getting the sama error for downloading the support packages. I chagned the systems details in the Service.sap.com also. in the logs it is showing the below error also
No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)
thanks

Hello,
we have the same error in our environment.
Product version is EHP4 for ERP6.0 and we have both product version (EHP4 and ERP 6.0) active in the SMSY as described in SAP note 1464712 and nethertheless we get this error message.
" No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)"
Anyone with a solution here?
Greets
Jens

Selection Screen options for Tcode CRM_DNO_MONITOR - Transaction Monitor

Hi all,
I need information regarding the selection screen when i am executing the Tcode CRM_DNO_MONITOR.
When i am executing CRM_DNO_MONITOR in the selection screec there are follwing options:
Mine
My Department
My colleagues
My Team(s)
In the selection screen if choose "Mine" option am able to see the o/p and if i select any other options am not getting the o/p. So It would be great if any one explain what are these options for and how they are use full ?
If i want to delete the unwanted selection criteria is that possible.
Thank you in advance,
Regards
Vijay

solved myself...!

Screen Sequence for Mov Type 301

Dear All,
I am doing two step transfer from one plant to another plant belonging to two diff company codes. When I use 301 movement type, the item detail data is coming at the top and the header data is showing at the bottom of the screen.
Please suggest where can I change this screen sequence for this movement type.
Regards
VT

I am sorry, Its a typing error. I am talking about 303 itself. When i try to post material document with 303, the item detail is showing at the iter overview's place and vice versa. Could you please suggest where can I change settings so as to get the correct screen sequence?
Regards
VT

Dead screen, looking for screen sh

I have a Zen Xtra with a dead screen. The backlighting works, but I do not get any text on the screen. Everything else works. What I am looking for is screen shots that will take me step by step throuh the different screens, ie, to pick an artist I press menu (pick of what screen looks like), press select button once, get this screen (pic of screen), press select button down twice to get to artist (screen shot) etc. I have an idea, through trial and error how to play some music, but need to know how to get to albums, artists, play all, and play mode. Any help is appreciated. Thanks.

Since many have viewed this (But no one has replied), I will reply to myself. I took the MacBook Pro to the apple store. They took out the battery, which was working fine by the diagnostic, and found that somehow, the traChpad had tightened itself in terms of sensitivity. They adjusted the trackpad sensitivity, buttoned it back up, worked like new, no charge!!! If you experience this problem, take it to the apple store, let them adjust the track bar, you'll be off and running in 15 minutes...

Purchase order field optional for Movement type

Hi SAP friends ,
Please let me know the config path to make the purchase order field as optional for particular mvt types that are used in MIGO transaction to receive the overage stock or reversal of overage stock
Regards,
JR.

Hi John,
If your posting a 101 movement against a purchase order then there is probably no way of making the PO optional, as this is a designed process
I guess I need to understand the process in more detail
In the Interim please look at the following customising settings
Materials management > Inventory management > Inventory management and PI > Field selection for for goods movement
Materials management > Inventory management > Inventory management and PI > settings for enjoy transactions > fields for goods movements
Regards
Steve

Selection screen option for Screen type like inDEMO_SEL_SCREEN_AS_SUBSCREEN

Similar Messages

Maybe you are looking for