Serious Problem-want to track

Dear Friends/Basis Guru,
I have configured partner determination in our solution manager system and it is working fine.
Suddenly something happened and the access sequence entry is deleted.
I created again but I want to know the reason behind it.....
Means whether it is deleted by some1 or it happened due to some patch/service pack upgrade.
Please suggest and advise.

Similar Messages

Serious problem recording guitar tracks! I can't get them tight!

I am a good player and have recorded quite a bit in my life, but I can't for the life of me get these part to lock with everything else. I'm using a click and also playing to drums and keys. It feels tight and feels like it is locking when playing but upon playback, at least for my ears it is not there. I've had this problem before and literally had to shift the region to get it to lock a little better.
Could it be something with latency, what I am playing and feeling is not what is going down to tape, or hard disk?
Perplexed.

Hi Foxboy,
Yes I'm am using an M-Audio Fastrack Pro. I think I might have solved the issue, but if you have any suggestions I am completely open to suggestion.
Thanks

What do i do ? My i phone 4 has no option to reduce the motion picture. It is causing me a serious problem. Can anyone please help ?

After several attempts to get some help from Apple, it has become clear to me that my i phone 4 has no options within accessibility to reduce the motion picture.
I have a serious problem with the new software but unfortunatly i cannot go backwards with this update. Apple for obvious reasons will not advise any downgrading options. Can anyone please help me? Is there a third party option here. I do not want to pay for a new phone or replace the i phone as i run a mac,desktop and i pad... !! Thank you.

Giansh2006 wrote:
I don't quite understand why you have asked me about why I'm keeping my URL secret?
It's only that I'm not clear why you are reluctant to post it. If you have a podcast in the iTunes Store then it's there for the world to see - they might search on its subject or title, for example, even if they don't actually know about it from you. If you look at other posts in this forum you will see that usually people post their URLs and then I can examine the feed and hopefully find out from that what the problem is. Without this information no-one can give you anything more than wild guesses.
If you are still reluctant to post the details and want to have a bash at diagnosing the problem yourself you may find my web pages helpful:
How do I make a podcast?
how to diagnose a podcast feed
Why don't my podcast episodes show the podcast image?

Serious problems including battery overheating

My dad and I both bought Revolutions and have had the same issues with our phones (listed below). We truly believe that the LG Revolution is a defective phone - what are the odds that we would both get "lemons"? While at the Verizon store on 3/13, the store, corporate customer service, and LG claimed to not be able to do anything for us except send us refurbished phones or return our phones to LG and have them worked on (HA. Seriously? Go without a phone? We don't have a land line anymore - might as well dump us on a deserted island). We were notified today, 3/15 that the phones were in the store ready to pick up, but they didn't come with new batteries! SERIOUSLY?!?! THE MAJOR ISSUE WITH BOTH IS THE BATTERY OVERHEATING! These phones are bound to either burn us or kill us. We don't want someone else's "fixed" phone, because it will just do the same thing! Unless Verizon will help us, I'm afraid we are going to get iPhones from another provider, as well as go to the BBB to file a formal complaint. I really don't want to, but I can't believe how much we have spent for our little death machines. We really hope Verizon will cooperate and uphold the standards they set forth in their employee handbook. We would love to be contacted by someone who can help. Please, don't give us the run-around. As anyone can see, factory resets, changing settings, etc. don't work. We have put up with those suggestions for months with no improvement.
My Dad's Revolution:
Bought LG Revolution ~July 3, 2011 for $250 + taxes & fees, car charger, (and eventually extra chargers). Over $300 total put in.
Battery gets overheated to the point that the phone is too hot to touch. This drains the battery from any percentage of battery to 0% in a matter of minutes. FIRE HAZARD IN YOUR POCKET! My dad's chest was almost burned! If it is too hot to touch on the outside, what is it doing to the guts of the phone?!
Not receiving text messages and picture messages that are sent
Internet doesn’t work properly - only when it feels like it
Loses data connection between 3G/4G/Wireless
Not always getting voice mail notifications
Phone burned up 2 wall chargers
Freezing
Phone is ringing, but the “answer call” screen doesn’t come up, so there is no way to answer the call
Phone rings once and then shows a missed call. When calling the person back, they say it rang the normal number of times before going to voicemail.
Not keeping a charge
Called sister next door and Dad could hear them, but she couldn't hear him. He called back and he could hear her fine, but she said he was very "scratchy" - keep in mind this is NEXT DOOR.
My Revolution:
Bought LG Revolution ~July 9, 2011 for $250 + taxes & fees, (eventually, multiple) car charger(s), insurance plan, (eventually, additional wall chargers) $400+ for the total cost
Battery gets overheated to the point that the phone is too hot to touch. This drains the battery from any percentage of battery to 0% in a matter of minutes. FIRE HAZARD IN YOUR POCKET! My thigh has almost been burned! If it is too hot to touch on the outside, what is it doing to the guts of the phone?!
Paying for “Unlimited Data” and phone constantly says “Mobile Network State: Disconnected”
Not receiving text messages and picture messages that are sent
Not being able to send text messages or picture messages
Getting the same text 3-4 times
Sending a text once and recipient getting it 3-4 times
Internet/apps don’t work due to no data
Loses data connection between 3G/4G/Wireless
Not always getting voice mail notifications – getting voice mails 14+ days late. This creates a serious problem for time sensitive messages.
Phone burned up 4 wall chargers and 2 car chargers
Freezing
Phone is ringing, but the “answer call” screen doesn’t come up, so there is no way to answer the call
Not keeping a charge. On a daily basis between 7:30am-12:30pm, I go from 100% to 20%. In the store on 3/13, the Verizon rep witnessed my phone go from 81% to 68% in about an hour
Phone rings once and then shows a missed call. When calling the person back, they say it rang the normal number of times before going to voicemail.
In the beginning, I would get email notifications and after I would read them, it would appear that they were “marked as read”, however, after I back out of the program, it notifies me of the same emails that I just read, only they’re once again “unread”. Now, I’m not getting ANY notifications of email except in the top drop-down screen, which if I click on it, I can see the emails, but after I back out, they disappear because the program decides not to work.
GPS is unreliable. It often says that I'm 2+ miles away from where I actually am.
The phone does what it wants to do when it wants to do it – not when you tell it to! All of our previous phones have given us reliable, clear service. What is wrong with this picture? HELP!!!

Hi I recently had the same problem with the LG Revolution. In fact it had been one of multiple replacement models that I had received in just a few weeks. The first two devices I had problems with them recycling power, I would make calls and they would make the same call multiple times i.e I would get through to the person I was intending on calling and the phone would call them on like a three way call asking me to merge the conversation I was only having with one other person... The 2nd replacement only lasted a few days. I was playing Words with Friends it gave me a sim error out of nowhere shut down. I checked the card after removing the battery and powered it back up. I was fine for about 10 minutes shut down and I was never able to turn it on again. The next phone they sent I received a few day ltr was the frosting on the cake. As soon as I tried to set it up the problems began. The phone was recycling power so much that it wouldn't fully power up before shutting down. Tech support insisted it had to be the battery, that there was no way they sent me 3 bad phones within 2 1/2 weeks... The new battery was sent over night. So I charged it up and gave it a go. It seemed fine at first, but then started acting up again. I resorted to it wasn't the battery and figured when I got to a land line or another line I would call Tech support. I was driving the phone was in my right lower scrub pocket apparently because of whatever mechanical defect it had overheated and burned me. I have been kind of at a loss when it comes to the Customer Service Dept. I have reported the incident to them even called to find out who to send my co pay bills too, no response. However they did have the nerve to send me a text asking for the device back or they were going to charge me $500. Now I'm thinking may be if people started taking things like this to the media they would act on it...

Serious problem with blackberry 9300 Curve handset and denial from BB to replace the same, under warranty.

Dear Blackberry Authorities,
It is really a horrible experience with the handset of blackberry for me. I have purchased blackberry Curve handset 9300 on 22nd April from a "Phone Store”, Shop No.78,79,community centre, New friends colony, New Delhi, The Invoice No. is 319,The details of the handset are as follows:
Handset: Blackberry Curve 9300 1256-India Qwerty-Pink
Name: Blackberry 9300: ETA-716/2010/WRLO
Model: RDA71UW
It has been more than just three months ,when i purchased this handset ,It worked fine for about only fifty days from the date of purchase and from the second month ,to my shock, serious problem started in the handset and some time it was getting hanged ,sometime some keys in the keypad did not work ,some time it was getting hanged the moment I receive incoming call., sometime sms sending problem, some time some other problem ..Every time I used to switch off the phone and start again, then it used to work but after some days again there were some other problem occurring in the handset.
The phone was not getting connected to PC from the starting, and i have tried so many times but i fail to get success.
Many a times when I used t send sms the entire alphabet typed on sms has gone separately as a single alphabet in a particular sms to the recipient, causing embarrassment for me in my organization. I would blame the black berry for this embarrassment as this has caused due to faulty phone they have sold me,
I am service class person and i get occupied with my work at office in the day hours and doesn’t have time to go to the service centre of blackberry every time the problem occurs, as there are only one service centre available in Delhi at Lajpat Nagar.The service centre is about 20 Kilometers away from the area my office is situated, I managed to keep the phone running by switching off and switching on after one or two minutes, every time the problem occurs but in the first week of last month ,when the problem started continuing after switching off and switching on also ,I was bound to go to service centre at noida since it is close to my place (about 14 Km) in comparison of Lajpat nagar at new delhi,the service engineer at blackberry service centre saw my phone and said there is some software problem which can be rectified by reinstalling the software, and there are some hardware problem also (some keys on the keypad is not et. all working) ,for which i have to surrender my phone to them and they will send it to the Blackberry Office (they did not give address) and it would take 15 days at least ,thus since I had no back up phone and my each and every contact no. was there in phone it was difficult for me to give them handset at that time ,so I requested them to rectify the software problem by re installing the same.
I asked the service manager to get the backup of all the data and contact no saved into the phone, but they refused to do so and they asked me to go to some other shop nearby to get the data backup, I went to that shop and they asked 250 Rupees for data backup of my phone. I was bound to say yes to them for the amount the charge for backup .I gave them my handset and after 20-30 minutes they came back to me by saying, we cannot store your data backup as it is not connecting to PC. It was a highly disappointing reply for me.
Then i again went to your service centre and written down some important contact no.(the number which was stored on phone book) on piece of paper and taken out my SD card ,and gave them handset for re installing the same.
They gave me my handset after one and half hour and said" now it would work fine except hardware problem.".I came back and to my utter shock again after two three days handset was into its old condition ,then also I tried to manage with handset and when i could spare sometime I went to your service centre again on 24th July at Noida,
they took the phone and said it would take 12-15 days to return the handset after rectifying the problem,when i requested them to change the handset with a new handset which is at least in good working condition , they clarified that if the hardware problem is not manageable or repairable ,i would get new handset had no option except to give them handset for rectifying the problem.
Now,It is the time for a biggest shock from blackberry people-Today on 3rd August ,i have received a call from noida blackberry service centre to inform me that my handset cannot get repaired under standard warranty conditions of blackberry as there are some moisture into the phone and there is no warranty if there is a moisture inside the phone.
Thus now i wish to inform all the concerned ,Blackberry/Research in Motion ,managers/authorities ,that i have explained above ,all the things ,happened to me in last three months of my purchase of handset, in detail ,so i would again request to Blackberry/Research in Motion ,managers/authorities, to rectify the problem of my handset or change the entire handset so that I can use the same peacefully and should not roam around the service center of blackberry.
Giving this lame excuse that "there is a moisture inside the handset and thus it can’t get repaired or changed under warranty " is a clear case of cheating and harassing the customer, I have bought the handset to use it for my communication purpose not to roam around the blackberry service center nor to put water or moisture inside the handset and play with the handset and fight with all of you.
If there were some moisture inside the handset then that should have been seen by the noida service centre people also during my First visit itself by them and they would have refused taking the handset for repair. They did not refuse but accepted handset and reinstalled software also, If there was some moisture that would have been seen by them that time only.
In my second visit also the took my phone and seen the inside condition also of handset in front of me ,they did not see any moisture, that time also ,and now after 10 odd days ,there are some moisture inside the phone??????.
I have no idea how blackberry keeps its handset ,which has come to them for repairing ,but if there is any trace of moisture into my handset ,that would have come into the handset ,during these 10 days only when phone was with blackberry authorized service engineers for repair purpose. What I know is that My Blackberry handset is under warranty and it is not working properly thus it should be replaced by Blackberry.
On the keypad if some key are not working that is a hardware problem which was there in the handset and it has no connection with the moisture.
If this is the way blackberry is treating its customer, i would say it is harassing its customer, and does not want to rectify the problem .in this case, I would have no option left except to go to the consumer court in Indian judiciary system. And moreover i would inform my and other friends, organizational employee also not to use services/or buy blackberry handset if this is the way BB is treating its customer.
I would request all the concerned persons/managers/authorities of Blackberry/Research in Motion, take action into my case urgently and rectify the core problem into my handset instead of giving lame excuses, and change the faulty handset of mine with a new properly working handset under warranty condition.
Best Regards
Asim
Edit: Personal information removed. At no time should you provide any personal information to any other community member. Please review the Community Terms & Conditions and Support Community Guidelines for additional information.

dubem747 wrote:
It looks like your phone has a some virus, use your computer to scan and remove it.
not possible for it to have a virus and a PC would not know how to scan the OS as its protected
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Looking for some VPN advice on c7200 and possible serious problem

Hi all,
I am looking for some advice on how to figure out few things.
customer has a c7200 with VPN module and seen the following
15.2(4)M4, RELEASE SOFTWARE (fc2)
Vpn7# Show crypto isakmp sa
Exemple: x.x.x.x y.y.y.y QM_IDLE 14020 ACTIVE ( repeated around 700 times)
Vpn7# IKE-Session : 2517 active, 5120 max, 3169 failed
Hardware Encryption : ACTIVE
Number of hardware crypto engines = 1
CryptoEngine VAM2+:7 details: state = Active
Capability : IPPCP, DES, 3DES, AES, RSA, IPv6, FAILCLOSE, HA
IKE-Session : 2800 active, 5120 max, 3169 failed
DH : 55 active, 5120 max, 0 failed
IPSec-Session : 1628 active, 10230 max, 0 failedhe would like to know whether these messages allude to some kind of serious problem or show the normal operation of vpn routers. because they need to analyse their business related incidents and do prevent actions
therefore if someone could give give me some advice if there is any problem with the hardware i would greatly appreciate it
thanks in advance
Lance

I'd make sure to read the contract and any associated fine print really, really carefully before doing this. But back to your question - this is more of a marketing question and I'd suggest hiring a good marketer (or become one) to make the most of this opportunity.
And how do you find a good marketer?
I'd suggest using Seth Godin (http://sethgodin.typepad.com/) as your guide/model. If the person you want to hire knows and follows Seth's good marketing advice, you'll likely do very well. If they don't know who Seth Godin is and are obsessed with SEO rankings and email blasts, I'd be very worried (that's not to say SEO rankings and email blasts are "wrong" but that they shouldn't be the only options in your marketing approach).
Good luck!

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. after Office Updates.

I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
Here is a quick note from the event viewer:
The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1138
Start Time: 01d07dcede19c458
Termination Time: 15
Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Report Id:
Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
this add-in and check to see if an update is available. Do you want to disable this add-in?.
I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
someone could help me get to the root cause of the matter.
My environment is as follows:
Windows 7 x64 SP1
Office 2010 v 14.0.7128.5000
Adobe Reader MUI X and Adobe Acrobat X
Feroze

Hi,
As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
Or contact the support of Adobe and see if there is a known compatibility issue or not.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in.

I've installed Adobe Presenter V7.0.7 Build 7746. When I open an existing PowerPoint file and try and use Presenter, I get the following error: PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in. If you have seen this message multiple times, you should disable this add-in and check to see if an update is available. Do you want to disable this add-in?
No, I don't want to disable it. When I click No, PowerPoint stops working. I get a message that says: Microsoft PowerPoint has stopped working. A problem caused the program to stop working correctly, Widows will close the program and notify you if a solution is available. My only choice is to click the Close program button.
When I open the PPT file again, I get the same "experienced a serious problem" message. If anyone has a solution to this, I'd appreciate knowing what it is. It took me a while just to get the Presenter option to appear in the PowerPoint toolbar. Now that I have it, it's not working.
Thank you!

Thank you for your quick reply. Here are the answers to your questions.
1. The file I'm having issues with was not created using any version of Presenter. It is simply a PowerPoint file.
2. The file is a PPT not PPTX.
3. I am running Windows7 and Office 2010.
I think I might have found the solution to the problem. I opened the PPT file and saved it as a PPTX file. Then I clicked the Presenter option in the PowerPoint toolbar and was able to select different Presenter options with no issues. I opened other PPTX files and I did not get the error window stating 'PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com addin' add-in'.
This seems to work. So, it appears that any PPT file needs to be saved as a PPTX file before using Presenter. If you have another solution that I might be able to keep in my back pocket (in case this happens again and what I did does not work), then please answer. Otherwise, I'm good now.
Thanks!

A serious problem with Mac OS X

Dear Mac Community
Since I bought my first iPod (a 3G), I have been a fan of Apple. For years, I had wanted to make a switch to the Mac. About a month ago, I finally decided it was time to leave the M$ world, and bought a Mini.
My overall experience has been nearly flawless, with no crashes, truly amazing apps that are mac only (like QS, adium, spotlight and the whole iLife bundle, to name a few) and a very good looking interface.
You may've noticed the word "nearly" on the previous paragragh, and it's there for a reason. There is one serious problem I can't solve. I am Brazilian, and therefore, I speak and write mostly in Portuguese. But OS X has no support for the Brazilian layout keyboard. I have been after a solution since day 1 with my Mac, but all I have managed to find out is that there are tons of pages in the web about Portuguese speakers complaining that their keyboards don't work properly. Apparently, this has been an issue since Mac OS 10.0, and until Tiger there isn't a solution for it.
There are many different hacks to try to solve this, and I've tried every one, but they are either buggy, or don't work properly with non-universal apps (including word), or aren't 100% accurate on the keys placement.
The fact is, I write a lot for school, and I need a Brazilian layout keyboard. And my parents, who were also seriously considering switching, work a lot with translations, so it is even more important for them to have the right layout.
I am going to send a complaint for apple regarding this, but I'm skeptical that I'll get a solution, since this has been a known issue for a long time.
Sincerely
Daniel

There is another major problem with the layout I'm currently using which I forgot to say:
- I can type accented letters with almost no problem (á, à, ó, é, etc), except for "è" (e + `), which shows up simply as "e".
"That seems very strange to me. It could be something related to layout id's, which can easily be changed. Let me know if mine works with Word (I assume you are talking about Word2004 rather than the old WordX?)."
I've checked that more carefully, and here's what I've come up with: Word doesn't change the layout to US, it simply stops recognizing the 12th key (the extra one) which is responsible for "/" and "?" (and therefore is fairly important)
btw, I'm using Word 2004
"Thanks. Feel free to email me details and screenshots if you like. Since no one outside Brazil is likely to have the special keyboard with 12 keys on the bottom row, it's somewhat difficult to build and test layouts like this. (tom at bluesky dot org).
Try the one called winbrazabnt73.keylayout, which tries to put in the extra key. "
There is one problem with your layout, which is the fact that no app recognizes the 12th key responsible for "/" and "?" (including Pages, which doesn't have this problem with the other layout I'm using).
On the other hand, your layout manages to type the "è", whereas my other layout doesn't.
In the site you provided above in this thread (
http://m10lmac.blogspot.com/2007/02/fixing-brazilian-keyboard-layout.html), there is an image of different kb layouts available in Windows and OS X. If you could make the Windows Brazilian ABNT and it worked with Word, all my issues would be solved, since that's exactly the layout I'm looking for.
BTW, thanks for all the support
Best regards
Mac Mini 1.83 GHz Core Duo 1 GB Ram 80 GB HDD Mac OS X (10.4.8)

A serious problem in Migration workbench - BUG!

When migrating a MS SQL Server 2000 database to Oracle
using Migration WOrkbench 2.0.2 I've run to a serious problem.
Capturing the source database went OK, then creating the
Oracle model started and it finished after some time, but -
after looking at the Oracle model pane I could see no
objects mapped!
SInce it looked almost impossible to get any technical
support I started to hack thru the Workbench repository
myself and found out that the objects were actually mapped,
but the user which owned them was not mapped to some reason.
Namely, when issuing the query
SELECT obj_owner, count(*) FROM om_obj_info GROUP BY obj_owner;
I saw most of the objects owned by the user named
'<DOMAIN>_Administrator' (that what was captured from MS SQL)
while the user mapped in the Oracle model was named simply
"Administrator". After updating manually the obj_owner
field for all those records with 'Administrator' I could
see the migrated objects on the Oracle Model pane.
However that way of doing the job seems rather owful for
me since I will be to perform migration many times for
individual objects - I want them to appear immediately, not
after hacking thru repository!
Who may help to find a GOOD workaround?
I may provide the export file of the Migration Workbench
repository if needed.

Vitaly,
can you use the sp_changedbowner with the parameter "sa" if the database you are migrating is not already
owned by "sa". If this does not help you, please send the error.log file which can be found in the
%ORACLE_HOME%\Omwb\logs directory as well as a zipped version of the repository, if possible,
to [email protected] and we will be happy to investigate the problem further.
Regards,
Tom - Team OMWB.

Help me please : Serious problems with collection-mapping, list-mapping and map-mappi

Hi everybody;
I have serious problems with list-mapping, collection-mapping and map-mapping.
Acording to specifications and requirements in a system I am working on it is needed to
get a "list" of values or an indivudual value.I am working with ORACLE 9i Database,
ORACLE 9i AS and ORACLE 9i JDEVELOPER.
I tried to map a master-detail relationship in an entity-bean, using list-mapping.
And this was very useful in order to get a "list" of details, ...but, when I wanted
to get a single value I have some problems with persistence, something about "saving a state"
despite I just want to get the value of a single detail.
I decided to change it to map-mapping and the problem related with a single detail
worked successfully, but I can get access to the whole bunch of details.
May anyone of you help me with that?
I am very confused I do not know what to do.
Have any of you a solution for that problem?
Thank you very much.

Have you tried a restore in iTunes?

Serious problem adobe presenter addin

I am using Office 2010 32 bit version and have presenter 7.07 installed. It still brings the "serious problem with add-in" and wants to know whether I want to disable it. I said no and then reopened PowerPoint.How can I avoid this problem?
Thanks for any help you can give me.

Thanks for the advice, Jorma. This solution works. I recorded my sound files in audition and now it doesn't crash any longer when I publish.
Now I have a different problem. I need to upload the presenter files to YouTube. Is there a tool that converts presenter swf to avi? I have tried Sothink but it didn't work with presenter swf although it works great with other swf files. Presenter swf files don't seem to be standalone. When I move the swf file only to a different directory it no longer plays. There is some logic that I don't seem to grasp yet.

When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.

What can I do to start the program again, when it does not answer? The only message I get is that there is a serious problem.

Thanks a lot for your quick reply! However, it works again, after a restart!
Best regards,
Hans
Hans Storhaug
Director
Norwegian Emigration Center
4005 Stavanger
Norway
m +47 908 31 097
9. juli 2014 kl. 10:57 skrev Mylenium <[email protected]>:
When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.
created by Mylenium in Adobe Creative Cloud - View the full discussion
Without knowing anything about your system, nobody can advise. In any case, the ID forum would be a better place to ask such questions.
Mylenium
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6535011#6535011
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Possibly Corrupt Catalog .Dat Files - A Serious Problem?

This question continues from http://forums.adobe.com/thread/804620?tstart=-1.
The three .dat files (backupCt.dat, collstatus.dat and tagstatus.dat) in one of our Adobe\Catalog Folders subfolders ("Paintings") may be corrupted. Whereas these files appear to be rewritten routinely, along with the thumb.5.cache file, each time Adobe Photoshop Elements is opened to one or another of our catalogs, the three files have not been rewritten for the Paintings catalog since 3/9/11, although that catalog has been opened almost every day. This situation came to my attention because the three files showed up in error messages in the Second Copy backup program I run every night, saying that the three files could not be copied because access is denied. In my previous post (referenced above), MichelBParis suggested that I could delete those files safely and that they would be rewritten when the catalog was next opened. However, I can't delete the files, rename them, or move them elsewhere because of the access denied status (I get an error message asking me to be sure that the disk is not full or write protected [which it is not] and that the files are not currently in use [which they are not, at least as far as I can tell -- Adobe Photoshop Elements has been closed when I have attempted all procedures, and I don't see any other applications or processes running, as per Task Manager, that I can immediately identify as belonging to Adobe). I have thought about restarting the computer in Safe Mode to see if I can delete the files then. However, I am a bit nervous about trying this, as the Paintings catalog in question is huge and of enormous importance to my wife -- I don't want to do something that might inadvertently make it impossible to access or use that catalog (as happened to us once before when we were using Adobe Photoshop Album Starter Edition 3.2, and the catalog became corrupted).
My questions:
(1) Does anyone know what these three .dat files actually do? I've not so far been able to find this information via Google.
(2) If these files remain in their present state (access denied and non-rewritten), do we run the risk of ending up with a serious problem down the road and loss of our ability to access the catalog (or some other loss of functionality)?
(3) Would it be safe for me in fact to delete these three files if I can find a way to do so (e.g., in Safe Mode)?
(4) If it would, indeed, be safe for me to delete the files, and if that would seem to be a next step to try, are there any suggestions for how I could go about doing so?
(5) Any other suggestions about how I can get the Paintings catalog back in proper shape?
Thanks for any help anyone can provide!

Most likely the files are not corrupt if your basis is that the backup program cannot open the files. However, I would be concerned about the security settings in the files if multiple users need to access the same catalog. This might be why you aren't seeing any changes to the time/date because one of the user doesn't have rights to modify the file.
Please tell me what OS you are running and what version of PsE?
For PsE 9 (and I think 8), you can modify the media-analysis options from the Organizer...
Menu 'Edit->Preferences->Media-Analysis'
Uncheck either checkbox as shown in the red circles
After hitting 'OK', exit the organzier and reboot.
See if you can access the .Dat files.
Instead of copying the catalog, I would just create a new empty catalog. This can be done as follows...
Menu 'File->Catalog...'
Make sure you note where the current catalog is located before you continue. The name of the current catalog is found in the box at the bottom of the dialog with [Current] added to the end of the name. Now...
Click on 'New...'
Enter the new catalog name.
Click on 'OK'
The organizer will use the new catalog. You will now see nothing is in the organzier.
See if you can access the .dat files. You may need to reboot.
You can select the previous catalog as follows...
Menu 'File->Catalog...'
Click on the previous catalog name
Click 'Open'
There is something not right with the security settings especially if you want multiple users to be able and access the catalog. As far as how things got messed up -- I have no idea. Some possible options are that one user has more rights than another user. The one with more rights created the files just fine but the other user has no way to read the files. Or someone was messing with the security settings.
Security settings in Windows can get very complex very fast. I hesitate attempting to walk through this can be done because there could be many factors which has caused this issue. You could have specific security settings on the files which override parent directory security settings. Or the parent directory security setting could simply be wrong.
You first need to determine if both users need write access to the catalog. If this is the case and they are not administrators, I would go ahead and set the security settings on the folder containing the catalog. You do need to be careful so you don't remove security settings such that you cannot even make changes to the security settings. Make sure you give full control to "This folder, subfolders, and files" in the Permission Entry dialog.
I would encourage you to look at the effective permissions on all files in the catalog after making any changes and before you start up PsE again. I have no idea what would happen if the security setting was wrong on a single file. This could cause a corrupted catalog depending on how PsE is written.

Serious Problem-want to track

Similar Messages

Maybe you are looking for