Service order type from repair orde

Hi,
Is there any custo to define the service order type from a sales order type.
Thanks in advance for
Regards

Hi,
If u want to create service order from sales order,then some prerquisits for this are as.
MRP strategy group is - 84 in material master,
Fill all the data in t-code OISD
Now create sales order >> put material & enter >>>system automatically create's service order, you can latter view it by in shedule line tab at item level or By t-code IW32.
Kapil
Edited by: Kapildev Farakte on Dec 28, 2009 11:22 AM

Similar Messages

Problem Creating Service Order SM03 from Repair order RAS type

Hi All,
While performing "Repair" action in repair order, we are triggering service order type-SM03
If the return material (serviceable material) is having Individual requirement settings in MRP4 screen, system proposing POP up screen for PO creation-
This POP up we need to restrict (even though as per present setting it is not effecting our business process)
This is because the serviceable material is copying as item "0000" in component tab.
Any inputs?
Thanks
Chidambaram

.

Change the default service order type for repair order - RA

When creating a repair order (RA), a service order of type SM03 is triggered. The default order type is SM03. How can I change the order type?
Thanks in advance...

hi,
try to change in OIOL and check ..
regards
pushpa

New service order type...

hi all,
i copied a new service order type from sm02 (customer service). i am creating a new service order and confirming for activity. but activity cost is not appeared on service order. what will be the reason?
(when i use sm02 with the same data, there is no problem)

Hello,
I believe your thread has been answered by Mr. Thyagarajan in PLM forum and you are satisfied with the answer.
Please close this thread.
Prase

Service Order creation from a Repair Order

Hi,
This is about a case of performing Repair services for customers. Customers send their defective product along with replaceable parts for performing the repair. After completing the repair, the repaired Product has to be sent back to the Customer. Then, we claim service charges from the customer for the labor involved.
I created a Problem Notification and from there, a repair order (RAS). However, after taking the defective product into stock, system is not generating a Service Order. It is automatically picking up SM03 and displays "Order Type SM02 is not suitable for repair processing".
Can anyone guide me through the steps required till Billing !!
Thanks.
Raj

It is not picking up SM03. It is picking up SM02. And SM02 is not a refurbishment type maintenance order. That is why it is giving this message. Trace back to the requirements class/ requirements type to see which service order type is being determined for the item category.

Service Order Creation from a Repair Order - Reg

Hi,
I have a situation where a batch of 100 Pieces of a serialized Serviceable Material has been delivered by a Customer. I have to carry out repair and treat each piece as unique. i.e., a Job Order for each Piece of the Material.
I created a Repair Order, Delivery and perform PGR to inward the incoming Serviceable Material. Now each Serial Number is in stock.
Now, is it possible to automatically create 100 different Service Orders (based on Repair procedure) for each Piece and assign Serial Number to each of these Service Orders ? Or should I have to enter 100 line items one after another manually ?
Thanks.
Raj

Raj,
No, if you want to stay within standard, then you need to create 100 items on the repair order each for one unit, then do 100 seperate goods recipts which will then create 100 seperate orders..
PeteA

Service order type assignment

Dear all,
How i am goin to assign the service order with the repair order type?
Regards,
Mohsin

The links are as follows:
Item category --> Requirements type --> Requirements classes. In the requirements classes the order type is assigned.
In customization:
Sales & Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements
B A

Revenue Account Determination based on Sales Order Document Type & Service Order Type

Hi Expert,
I have Customer Service Module with Resource Related Billing for services attached with SD.
When DP90 runs sales document debit memo request is created & then debt memo is created.
I need to configure Revenue Account Determination based on Sales Order Type and also based on Service Order Type.
I did not see any field catalogue in revenue account determination for order type, For communication structure KOMKCV Header and KOMPCV Item level there is no field for sales order type nor service order type.
Is it possible to bring in both order types? Can ABAP person do it?
How to bring these fields?
Is it possible & recommendd to have service order type filed AURAT for service order into this sturcture?
Is this configuration is OK acceptable by SAP? If so is there any chnace for issues errors & wrong determination from FI CO view?
Your valued input is highly appreciated.
Thanks
Prakash Parikh

Hi Prakash,
Yes, you can certainly add new table fields into the field catalog KOMKCV and KOMPCV and use it during account determination. You will also have to add these new fields in the user exit RV60AFZZ for it to work. I believe you will need ABAPer's help to make this work. The abaper will have to crate a ZZFIELD (ZZAUART for example) and put it in the structure and use the same in the user exit to pass the values.
In your case, what I am not sure is, are you looking to modify the existing standard tables or creating new ones. My suggestion is to create the new condition tables with these new fields (like document type) after adding it to the field catalog. Only modify the access sequence (KOFI) in such a way that your new tables are access first before it goes into standard tables (or you can adjust it according to your scenario.
We have done it in our company and it is working fine. Basically what we have done is to create new tables instead of modifying the standard ones. We have adjusted the access sequence in such a way that some of our custom tables are accessed first before the standard SAP tables (C001 to C005).
I found a similar requirement on SCN. This might help.
Adding New Field in Account Determination
Hope this helps.
Regards,
Mukund S

Can Process Siebel salesorder and another order type from a another external system in OSM with O2A PIP?

We have OSM 7.0.3 with O2A PIP. We are currently getting the salesorder from Siebel and processing fine. Is there a way to also get another order type from another external system and generate an orchestration plan to only go to provisioning (not SOM)?

Hi, I believe that in principle what you described is possible.
I assume your other order source would transorm through AIA to the EBM message structure.
Please bear in mind that milestones are automatically generated to AIA, you would need to somehow address branching the milestones to the originating system.
However, since you want your other order to only go to SOM, you might consider submitting the other order directly there?
Why have it do through COM when COM has no value-added in termes of orchestration (since you always want just one and the same function).
Also, pls consider that with some future evolution of O2A, SOM is likely to take a service order as in input, which would be transformwed from the commercial order.
The right choice here depends on the wider context of your requirement.
Hope this helps.
regards
Viktor

Service order type creation

Hi,
I want to create a service order type. We dont have any requirement to create any service notification for it.
Could any one please tell me is it necessary to create a service notification before a service order.
Thanks and Regards

Hi
No there is no nedd to create service notification before order creation but in real time this logic will not apply before you have to craete the notification.
But if u want to just check this concept then u can eaisly create a order without creating notification
Thank & Regards

Service order type

Hi,
I want to create a service order type. We dont have any requirement to create any service notification for it.
Could any one please tell me is it necessary to create a service notification before a service order.
Thanks and Regards

Birendra,
I think this question has been posted earlier also.
You may create a service order directly using transaction IW31.
But in normal practice, the service order will be created after creating notification (IW21 / IW51).
It is not mandatory to create notification before raising a serivce order.
Prase

Number range creation for new service order type

Hi,
Could anyone please tell me how can we create service order number range if we have done a new service order type creation, and what should we do: should we create the number range in development and then transport it to the production or we should directly create it in production.
Thanks and Regards

HI,
You just define number range in tcode VN01, but remember that number ranges are not transportable.
Once you define number ranges in development, do the same in quality & production client.
Then attach number ranges in document type & transport this config to quality & production
Please see that before transportating, the number ranges must have been created in quality & production thru VN01.
Hope this helps you
Regards
Dhananjay

Error in requirement class while assigning service order type.

Hello All,
I am getting below error message whenever I am trying to assign a service order type to requirement class.
This the error meassage:
Maintenance order type ZSC3 is either not flagged as a service order type or revenue posting is allowed for this order type.
System Response
The system does not allow any further processing.
Procedure
Enter a service order type that does not allow revenue postings.
Please help urgently.
Best regards,
Partha Das

Ya do same thing but I dont think using this FM will solve the problem...
You get the Update Terminated message when the normal course of the program has been halted by user intervention.
Now could u please check that are u calling any FM in your program.
If yes just list out all of them.
Thanks.

Automatic Rule Determination Based on Service Order Type

Hi Experts,
I have a requirement to determine the rule based on the custom service order type.
I have created 2 custom rules which are then assigned to 2 different org units as needed.
Now the thing is i want to avoid putting condition step if else based on various order types.
Is there any way by which i can directly determine which rule to be used by passing the Order type.
If there is any FM then please suggest and also how to use the same.
If no FM exists then is there a possibility of having only 1 if else condition and assign rule number in local container variables and pass it thought out the workflow to all the manual validation workitems. Please suggest how this can be achieved.
Thanks,
Jessica

Hi,
only 1 if else condition and assign rule number in local container variables and pass it
thought out the workflow to all the manual validation workitems
Create a workflow container element lets say with probably 15 characters length...
Now create a background step in which you determine the rule based on the order type.
data: lv_Rule(10) type c.
if order_type eq 'X'.
lv_Rule = '1234567890'.
else.
lv_Rule = '0123456789'.
endif.
" export the rule concatenated with 'AC' which indicates a rule...
concatenate 'AC' lv_rule into ev_rule. "ev_rule size may be lets say 15 characters.
condense ev_Rule.
"export the EV_RULE to workflow and store it in WF cotainer element.
In the step where you want to give the rule, select the Agent type as Expression and select the container element.
Hope this would solve your issue.
Regards
Narin

Is this possible in TIDAL , Change the Lotus Domino Server (LotusDominoData) service Startup Type from 'Automatic' to 'Manual

1) Shutdown the Domino server (Lotus Domino Server (LotusDominoData) service)
2) Change the Lotus Domino Server (LotusDominoData) service Startup Type from 'Automatic' to 'Manual'
3) Reboot the server
4) Defragment the drive (D:\ or F:\)
5) Change the Lotus Domino Server (LotusDominoData) service Startup type from 'Manual' to 'Automatic'
6) Reboot the server
Any help would be appreciated.

Binu - are you wanting to automate this process with TES?
There is a windows cmd command "net stop" and "net start" you can use to stop and start a service.
You will need to work with your windows admin or look online for a command line way to change the service to manual and to start the defrag.
There is a shutdown command that can be run from cmd. It has a switch to force the reboot.
You might also check out scripting with WMI.
Hope this helps,
Michelle

Service order type from repair orde

Similar Messages

Maybe you are looking for