Shipment Cost per stage.

Hi gurus.
I need to calculate a shipment cost per stages. It's an additional candition type cost added to the main cost which is calculated per tansport header.
I'd like to have the stage as a calculation basis in T_06.
Thanks.

Have you activated Shipment costing at Leg level in "Define cost relevance for shipment type"?
also need to set up " Assign shipment cost types and item categories" .

Similar Messages

Shipment cost per ton

HI,
My user requirement is to see shipment cost per ton at present we are using shipment cost as total amount for the shipment
How to achieve this what are the settings we have to do in condition background.
Your reply is most valuable
Regards,
MH

Dear Mohammed,
What is the unit of measure for the material? is it TON? Are you maintaining the weight at the sales order level?
if you are using the UOM as ton then u can change the freight condition type to quantity from Fixed amount. This will solve the issue.
If you are using a different UOM for sales and weight is maintained at the sales order or delivery level then change the frieght condition type from fixed amount to weight or use any condition type which calculates based on the weight.
Fized amount is normally at the shipment cost item level and Ton should always be at the delivery item level. So change the shipment item category on how exactly the cost needs to be distributed.
Please revert for any further clarification.
Thanks and Regards,
Pavan P.

Shipment cost per shipment

Hi,
My user requiremnt is they want one time cost per shipment irrespetive of number of deliveries in the shipment.They are using one condition type for his .While vi01 cost should come once per shipment but i have done some changes the cost is coming to each delivery associated to the shipment.could you please assist.
Reagrds,
Debesh

Hi Debesh,
First of all, check your item category used into VI01. E.g. if you go to T_56 trx. check
how it is defined it. e.g. 0002 item linked to shipment type 0001 -> the origin of this item is "shipment header"
(rec. indicator) this setting characterizes the reference to which a shipment costs item refers.
Besides, as my colleagues told, condition type (t_06) and calculation basis defines how costs are based on..
regards,
david
Please refrain from begging for points, it is against forum rules
Edited by: Csaba Szommer on Apr 8, 2011 1:14 PM
Edited by: David Ruiz on Apr 12, 2011 1:40 PM

Hoe to split a shipment Cost per Distance

Hello
I have the following scenario:
2 Deliveries in a Shipment Document with the same route.
I have created a condition record for distance. For example: USD 1,00 per Mile and I have 1000 MI in my route so the system will calculate USD 1000
But I need to split these 1000 USD for each delivery, for example USD 500,00 for each one.
But when I am creating the Ship Cost the system is doubling my ship cost creating a document with USD 2000,00 being USD 1000 for each delivery.
How can I make to the system split my freight per distance?
Thanks
Marcos

Hi,
If I understand your problem correctly, in your calculation base for the condition type defined, you could maintain as "Shipment Cost Item" (cost determined for a Leg), and you can distribute the cost to each delivery in a shipment by maintaining cost distribution as "Delivery".
Hope the above helps.
Thanks.

Shipment Cost price per trip

How can we set -up the condition type as per trip or per shipment document?
Or maybe, set-up pricing per shipment route (and not per delivery).. What should be the calculation base of the condition type?
I can't find "per shipment' but only per delivery.. what if there are several deliveries in the shipment?

Hi,
if you want to combine several shipments, the calculation base is "shipment costs item".
Best regards
Juergen

1 PO per Shipment Cost Document

We would like to create one PO per shipment cost document. Currently it accumulates or adds additional shipment cost to an existing PO.
How do we do in customization?

Hi,
there is no customizing to support this requirement.
Best regards
Juergen

Apportionment of shipment costs

Hello,
In our solution, the shipment cost are posted as delivery costs during the putaway.
If we make changes to the delivery data (in quantity), the delivery costs are received per item according to the weight (the apportionment of the costs are made according to the weight).
But, this is done according to the quantity we receive and not the quantity initialy saved in the inbound delivery.
For example, we have 100$ for shipment cost for two PO, two Inbound deliveries and one transport.
PO 1 :
Material A : 50 Kg.
PO 2 :
Material B : 50 Kg.
If the good receipt is:
PO 1 :
Material A : 1 Kg.
PO 2 :
Material B : 50 Kg.
the shipment cost will be apportionned like as following:
Material A : 1$.
Material B : 50$.
And, what we would like is :
Material A : 2$.
Material B : 98$.
For us, the total price has to be 100$ even if we receive only a part of the inbound delivery.
Do you have any idea on how we could manage that ?
Thanks,
Regards

Hi,
I think we have a similar requirement. For FCA transports is the transport cost zero. We have created a seperate condition in the cost procedure as a condition class A ( discount or surcharge ) in T_06. This has an access sequence assigned which uses a 9xx condition table (T_03) with fields Service agent f.stage ( TDLNR ) and
Incoterms ( INCO1 ). This enables us to maintain condition records in TK12. So FCA is maintained with 100 % deduction and thus no costs.

Shipment Cost - Pricing Procedure

Hi,
We have several ways to calculate our shipment cost:
1> Per route (fixed rate) regardless of quantity
2> Per route -> fixed rate per quantity
3> Per route -> fixed rate per quantity with discount per material
4> Per leg -> shipment doc may have two legs (passing by a transfer point) point A to point B, fixed rate (#1), while point B to point C, quantity rate (either #2 or #3)
Can you let me know how to set-up in the system? 4 condition types? Should I have 4 pricing procedure for each? Should I have 4 shipment cost document? 4 Shipment types?
How to set-up in the system such that from the shipment document, I can display comparisons (if #1 or #2) option is cheaper ... At the moment, it does not prompt me comparisons.. when i click the freight cost estimate button, it gives me the value directly...
Thanks,

Hi,
in shipment maintain 2 stages e.g.
Departure point A to point B
Point B to Destination Point C
Also in shipment cost type>>>Idefine team categories(0001)>>>Maintain distribution as "A"(shipment cost item)
Now create Shipment cost document by VI01, Here you will find 2 iteams( 1 is A to B and 2 is B to C),now for first you can maintain fixed price and for second you can mainatian on base of quantity.
Make appropriate calculation base in condition types.
If any problem revert back.
kapil
Edited by: Kapildev Farakte on Nov 25, 2009 6:04 AM
Edited by: Kapildev Farakte on Nov 25, 2009 6:17 AM

Shipment Cost: Group Condition Type calculated on a special weight...

Here is the scenario: A shipment (truck) combines multiple deliveries, grouped on a stage when same destination (happens often).
A condition per LB is to be calculated on the cumulated weight per destination (per stage) BUT not simply on the gross weight, but on the heavier of 2 special weights: the business here uses a special formula according to the packaging, and it gives 2 weights (stored in Z fields of LIKP), an actual weight and a cubic weight.
The purpose is to identify for each delivery the heavier weight and to use cumulated the weight across the deliveries to the same destination to calculate the per CWT cost.
This is my first issue: the condition type is defined at Delivery calculation base, Calculation Type Multi-dimensional, and as a group condition). How do I define to use the cumulated of each delivery heavier weight ? In the Scale for condition type view, I used the scale basis D Gross Weight (which is not right..), there is also a field for a Scale Base Value formula, I wondered if that is what I should use..
My 2d issue: once the cost is calculated, I have to re-distribute it on the deliveries as per the proportion of their heavier weight compared to the total weight used for the calculationShould that be an alternate Condition Base Value formula in the pricing procedure (where xkwert would be.the heavier weight.would that be then a new Z field to be filled in by the user exit determing the heavier value) ??
Thanks a lot, it is a tough one, I know...who is the best ever shipment cost pricing consultant ? !

Hi Guys
Unfortunately I do not think that you will get an answer now. Either your question is not simple or we do not know.
So in the interest of keeping the Forum tidy and easier to surf through could you please close your thread and either try one of the other forums or try another post. I do not think that most people will bother to look this far back anymore.
Sorry I cannot help as I would if I could.
Regards
Frenchy.

VI01 - Shipment Costs (combining Deliveries from the Shipment)

Hello experts
Do you know how to combine (consolidate) the shipment costing line item (VI01) when there are more than one Delivery to the same customer in the Shipment document?
E.g. I have a Shipment with 58 Deliveries and for a specific customer has 2 Deliveries, the Shipment Costing (VI01) must to create just one line item consolidating the 2 Deliveries for that customer, not to split 2 lines (one line for each Delivery).
Any help will be highly appreciated.
Best regards...
Marcelo Boccia - SAP SD

Hi,
As per my best knowledge shipment cost document item is not created based on delivery, it is created from shipment header or shipment stages:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/7440ac546011d1a7020000e829fd11/frameset.htm
Shipment cost items
The items refer either to a shipment header or a shipment stage. The items contain general data for shipment costing and settlement, such as service agent, pricing date and settlement date, tax amount and tax basis as well as organizational data such as company code, plant and purchasing organization.
There is an individual status at item level for each of the shipment costing, account assignment and forwarding to FI functions.
As you can see delivery is not mentioned.
At shipment cost sub-item level you may have deliveries.
Isn't it possible that your deliveries belong to different stages? Is any related development in your system?
Please check your shipment and report us on the result.
Thanks,
Csaba

Item categories in shipment cost document

Hi guys,
I have a problem with creation of shipment cost documents. I have maintained two shipment cost item categories, one for ship to warehouse and one for ship to customer. Problem is that when creating the shipment cost document, both item categories appear. Item category Z001 and Z002. Z001 has correct price, Z002 will have 0 value. Any ways that I can stop Z001/Z002 from appearing when it has a 0 value?
Thanks,
Jimmy

Hi,
I have serious doubts whether such setting would exist in standard system... So, what you can do is to solve it via developments:
SPRO > LE > Transportation > System Modifications > User Exits For Transportation
SPRO > LE > Transportation > System Modifications > Business Add-Ins in Transportation
Please check help for these customizing nodes.
(Maybe "BADI_SCD_SAVE"?)
However, maybe it would be worth considering whether you really needs two item categories.
Please also check what SAP help says for SPRO > LE > Transportation > Shipment Cost > Shipment Cost Document > Shipment Cost Types and Item Categories
You can, for example, create several items for a shipment stage per cost type. You may wish to do this if you want to post the basic freight and a surcharge for the stage to different G/L accounts. If you need to post to several accounts for one cost type, you can specify several item categories in this table for the shipment cost typeand the cost type.
Regards,
Csaba

Control of Incoterms in creation of Shipment Costs

Dear All,
We calculate shipment costs (Through Transportation module in SD-Freight payment-Outwards) on calculation base A (Delivery) or B
(Delivery item) and do not want to calculate deliveries that have certain
Incoterms (for example, TOP-To Pay, where Customer makes payment to Transporter).
By default, the system always creates a subitem in the shipment cost
document for the corresponding calculation base for every delivery item or for every delivery involved.
We want to have Control over certain Incoterms where we don't pay to the customers. We want to restrict the users not to calculate Shipment Costs in TOP-To pay cases. Kindly help if any Userexits available for this scenario to handle.
Regards
Subrat

Hi,
I think we have a similar requirement. For FCA transports is the transport cost zero. We have created a seperate condition in the cost procedure as a condition class A ( discount or surcharge ) in T_06. This has an access sequence assigned which uses a 9xx condition table (T_03) with fields Service agent f.stage ( TDLNR ) and
Incoterms ( INCO1 ). This enables us to maintain condition records in TK12. So FCA is maintained with 100 % deduction and thus no costs.

Shipment cost based on Value

I need your valuable suggestion on how to create the Value based shipment cost.
Our Process:
Create POS - Create Inbound delivery - Create Shipment - Create Shipment cost - Post Inbound Delivery.
So while posting the inbound delivery, the freight cost will post against the material. The invoice will be paid for the Vendor for the quantity purchased and freight charge will be paid for the freight Vendor(s).
We are adding the Vendor in the Shipment and adding the cost against the Vendor in the Shipment Cost.
Everything is working fine, but the shipment cost posting against the material was happening based on the delivery weight / quantity.
The reason for this asking the question is - we are receiving high value items and low value items with the same weight.
Question 1: Is it possible to have the shipment cost being split, calculated and posted against the material based on the PO Item received Value or PO Price
Quesion 2: Is it possible to post the shipment cost at a later date? Currently, the shipment cost posts when the inbound delivery is received (I know the material value will be posted when there is stock changes or price changes). But our issue is the invoice for the shipment cost will be received after a couple of days from the goods receipt. Right now we are entering couple of costs through assumption, then while postig the invoice, we adjust that value.
Note: I cannot enter the condition directly in the PO, as the same PO item will be partially received by multiple inbound deliveries

Freight carriers charges weight on the basis of Weight / volume of the items.SAP shipment works on the same principle.
Cost of transporting ton of Potataoes is same as transporting 10 ton of aluminium between two known destinations.
Hence it is illogical to distributes cost on the basis of item value. However if still you want to distribute the same on value basis then maintain freight condition(%) in PO as per your prefined logic of distribution of freight cost.
It is well known fact that cost of freight % is always higher in Low value items & iis low in case of High value items.
Regards,
Sanjay Kohli

Freight capitalization for STO process using shipment cost document

Dear MM experts
I have been testing and trying to charge freight to material using transportation module. I know how to do it in simple STO process without SCD (shipment cost document) but I am not able to do it with SCD.
I have searched and tried every link I found on SCN. Unfortunately there are many open threads and non of them is answered or giving complete solution. For example I have tried this link where Ajit Kumar has explained the scenario in detail I am but unable to achieve my result. I have also tried other links and SAP note 427944 as well.
Now what thing confusing me is accounting entries and documents/steps where these accounting entries will be posted.
My current process is like this in plant to plant transfer under same company code
STO > OBD > Shipment Document > PGI > Accouting Entry with 641 movement type. Material account debit and same account credit. > Shipment Cost document > GR with 101 without any accounting entry > Transfer freight cost to FI using Freight Service PO determination > Accounting Entry Freight Outward Expense Debit and Freight Clearing Account Credit > MIRO > Accounting Entry Freight Clearing Debit and Vendor Credit
As you can see we are booking freight as an expense and not charging to material. Now what I want is that freight should be charged to material. If I am sending material from plant P000 to plant P201 under same comapny code then freight charges should be added in material cost in plant P201.
I have done FRB1 condition type with accrual and copy shipment cost tick mark and other stuff suggested in all those threads but it is not working.
My requirement is to understand the points where and what accounting entries will be created as per my new scenario which is same as old one except one difference which is to charge freight to material instead of booking expense in freight service PO.
Lets take an example that material cost price is 100 and freight charges is 50. Now as per old threads at the time of GR against OBD system will create accounting document with 150 debiting the stock in plant P201. What about credit? If we have added freight here then what about 2nd accounting entry in my first scenario in which freight expense is debited and clearing account is credited? Could anyone please explain accounting entries and points where these entries will be posted?
Another thing is that is it only possible with moving average price to charge freight to material or can we do this with standard price as well using some standard or customized solution?
Detailed and easy to understand answer will be highly appreciated.
Thank$

Hi Moazzam ;
Firstly, you can benefit Badi/s in package VTRA which is given belowed.
Secondly , i think that shipping method --> create sto with delivery --> create shipment document and shipment cost document (problem is starting so system will be create PO and service entry sheet automatically , can you try shipment document is non-related with cost document.
Thirdly , you can post invoices charge to material with miro , if you success to direct freight costs to stock account (BSX).
Also , you can benefit doc. sap behaviours for Std price/ Map --> Planned & unplanned delivery costs in mm
I hope , you can manage your process ; for me standart way is the best.
Regards.
M.Ozgur Unal

LE-TRA Shipment costs as inbound delivery costs, goods receipt

Hello gurus:
We are facing the following scenario, regarding inbound transportation.
We plan our shipment document and shipment costs, and they feature several items. Each of those items represent a shipping service, which in certain cases be taken on different countries by the same service agent.
That is, we have a service X on country A, with tax indicator 1, and service Y on country B, with tax indicator 2.
Both services would need to be transferred as delivery costs to the purchase order.
According to note 427944, shipment cost value is cumulated by service agent., so that it looks impossible to get the values broken up to the purchase order, which would be the first step to subsequently get the right tax indicators for each item of the shipment.
Even using different condition types on the shipment cost document, system cumulates by service agent and transfers to the first condition found on the purchase order schema.
Has any of you faced similar issue? Any workaround possible?.
Thanks in advance for your valuable help.
David Ramos.
PORCELANOSA MM.
This is the section of note 427944 that indicates the treatment of the shipment costs in the purchase order,
Transfer the shipment costs into the condition types of the purchase order:
The shipment cost value (without tax amounts) is cumulated for all relevant shipment cost documents
for each service agent and transferred to a corresponding condition type of the purchase order item.
Before cumulation, the amounts are first converted into the purchase order currency.
1. A transfer of the values for each condition type (similar to the transfer from a shipment
cost document to the SD billing document) is not supported.
2. If different service agents exist in the shipment cost documents, a corresponding number of
condition lines (with value 0) must be specified in the purchase order item. These can always
belong to the same condition type (in schema 'Manual') or also to different condition types (not
'Manual'):
a) Manual condition lines: If the condition type in the schema of the purchase order is
marked as 'manual', the condition type must be created (with value 0) in the purchase order
item before the goods receipt. If delivery costs are expected from different service agents,
several non-valuated entries must be generated for this condition type. If more condition
lines exist than required, these are then no longer taken into account. If condition lines
are missing, the last service agents are not settled.
- Advantage: You only have to define one condition type for the delivery costs.
- Disadvantage: Each purchase order must be processed manually before the goods receipt.
b) Automatic condition lines: If the condition lines are to be generated automatically for
the delivery costs (the condition type is not flagged as 'Manual' in the schema), the schema
must have enough condition types to settle several service agents. If more condition lines
exist than required, these are then no longer taken into account. If condition lines are
missing, the last service agents are not settled.
- Advantage: The goods receipt can be carried out without manual preparation beforehand in
the purchase order.
- Disadvantage: You must define identical condition types with different names.
Message was edited by: PORCELANOSA MM

Hi,
If you refereed the OSS Note 427944 correctly it explains how the shipment cost can be transferred to delivery cost based on some pre-requisite.
Like the value for PO should be >0
Like the service agent is involved during shipment liability, then there should be cumulative transfer for each value which will update based on shipment cost if PO value is "0".
The shipment cost will be delivered to all delivery items based on weight.
If you want to enhance this then you need to use the enhancement V54KSFRC to update the values as per your requirement.
Rgds,

Shipment Cost per stage.

Similar Messages

Maybe you are looking for