SIP incoming call, won't work (CME)

Hi all,
I'm facing a weird problem and the sip-provider can't help. I suppose there is a problem with the dial-peer/translation-rule but I can't figure it out...
There is a CME (c2800nm-ipvoice-mz.124-11.XW10.bin, CME Version 4.2(0)) with a
SIP trunk.
Outgoing calls are working (DID).
Incoming calls (all DID) are ringing on the same internal number.
The situation:
- external  call on 0815440097 is ringing on the internal nr. 296 (should be 297)
- external call on 0815440096 is ringing on the internal nr. 296
Here the config:
================================
voice service voip
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
no update-callerid
voice translation-rule 40
rule 2 /\(.*\)/ /9\1/
voice translation-rule 190
rule 1 /^0\(.*\)/ /\1/
rule 2 /^9\(.*\)/ /\1/
voice translation-rule 191
rule 2 /296/ /0815440096/
rule 3 /297/ /0815440097/
voice translation-rule 192
rule 2 /^0815440097/ /297/
rule 3 /^0815440096/ /296/
voice translation-profile TP_IN_SIP
translate calling 40
translate called 192
voice translation-profile TP_OUT_SIP
translate calling 191
translate called 190
dial-peer voice 2000 voip
description *** SIP-TRUNK (IN/OUT) ***
translation-profile incoming TP_IN_SIP
translation-profile outgoing TP_OUT_SIP
destination-pattern 0.T
b2bua
session protocol sipv2
session target dns:sip12.e-fon.ch
session transport udp
incoming called-number 0815440096
dtmf-relay rtp-nte
codec g711alaw
no vad
sip-ua
credentials username 0815440096 password 7 xxxx realm sip12.e-fon.ch
keepalive target dns:sip12.e-fon.ch
authentication username 0815440096 password 7 xxxx
calling-info pstn-to-sip from number set 0815440096
no remote-party-id
retry invite 2
retry response 2
retry bye 2
retry register 2
retry options 1
registrar dns:sip12.e-fon.ch expires 69
sip-server dns:sip12.e-fon.ch
reason-header override
connection-reuse
host-registrar
sh sip-ua register status
Line                              peer        expires(sec)  registered
================================  ==========  ============  ==========
0815440096                        20005       18            yes
Here the CCSIP MESSAGE debug (looks ok):
(call from 0000000000 to 0815440097)
===============================
Mar  8 21:55:10.469 METD: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Record-Route: <sip:212.55.198.132;lr=on;ftag=as00cd0e7f>
Via: SIP/2.0/UDP 212.55.198.132;branch=z9hG4bK49ff.2d35e30a71291ffe3895b39164900f36.0
Via: SIP/2.0/UDP 212.55.198.134:5061;branch=z9hG4bK1cb84749;rport=5061
Max-Forwards: 69
From: "0000000000" <sip:[email protected]:5061>;tag=as00cd0e7f
To: <sip:[email protected]:5060>
Contact: <sip:[email protected]:5061>
Call-ID: [email protected]
CSeq: 102 INVITE
User-Agent: e-fon
Date: Thu, 08 Mar 2012 20:55:10 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO
Supported: replaces, timer
X-IPCONNECT: 0815440097
X-Number: 0815440097
Content-Type: application/sdp
Content-Length: 415
v=0
o=root 770254981 770254981 IN IP4 212.55.198.134
s=Asterisk PBX 1.6.1.20
c=IN IP4 212.55.198.134
t=0 0
m=audio 11886 RTP/AVP 8 9 111 3 18 0 101
a=rtpmap:8 PCMA/8000
a=rtpmap:9 G722/8000
a=rtpmap:111 G726-32/8000
a=rtpmap:3 GSM/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
Mar  8 21:55:10.481 METD: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 212.55.198.132;branch=z9hG4bK49ff.2d35e30a71291ffe3895b39164900f36.0,
Via:SIP/2.0/UDP 212.55.198.134:5061;branch=z9hG4bK1cb84749;rport=5061
From: "0000000000" <sip:[email protected]:5061>;tag=as00cd0e7f
To: <sip:[email protected]:5060>
Date: Thu, 08 Mar 2012 20:55:10 GMT
Call-ID: [email protected]
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 102 INVITE
Allow-Events: telephone-event
Content-Length: 0
Here is the VOICE DIAL-PEER debug (call from 0000000000 to 0815440097):
=============================================
Mar  8 22:00:09.498 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=0815440096, Called Number=0815440096, Peer Info
Type=DIALPEER_INFO_SPEECH
Mar  8 22:00:09.498 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=0815440096
Mar  8 22:00:09.498 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
Mar  8 22:00:09.498 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=20005
2: Dial-peer Tag=2000
Mar  8 22:00:09.498 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=0000000000, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
Mar  8 22:00:09.498 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=2000
Mar  8 22:00:09.502 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=0000000000, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
Mar  8 22:00:09.502 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=2000
Mar  8 22:00:09.502 METD: //-1/8647979A82E1/DPM/dpAssociateIncomingPeerCore:
Calling Number=0000000000, Called Number=0815440096, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
Mar  8 22:00:09.502 METD: //-1/8647979A82E1/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=2000
Mar  8 22:00:09.510 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=0815440096, Called Number=0815440096, Peer Info
Type=DIALPEER_INFO_SPEECH
Mar  8 22:00:09.510 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=0815440096
Mar  8 22:00:09.510 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
Mar  8 22:00:09.510 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=20006
2: Dial-peer Tag=2000
Mar  8 22:00:09.510 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=0815440096, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
Mar  8 22:00:09.510 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ANSWER; Incoming Dial-peer=2000
Mar  8 22:00:09.514 METD: //-1/8647979A82E1/DPM/dpMatchPeersCore:
Calling Number=, Called Number=0815440096, Peer Info
Type=DIALPEER_INFO_SPEECH
Mar  8 22:00:09.514 METD: //-1/8647979A82E1/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=0815440096
Mar  8 22:00:09.514 METD: //-1/8647979A82E1/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
Mar  8 22:00:09.514 METD: //-1/8647979A82E1/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=20006
2: Dial-peer Tag=2000
show dial-peer voice summary:
dial-peer hunt 0
AD                                    PRE PASS                OUT
TAG    TYPE  MIN  OPER PREFIX    DEST-PATTERN      FER THRU SESS-TARGET    STAT
PORT
555    voip  up   up             555                0  syst loopback:rtp
20001  pots  up   up             296$               0                          50/0/1
20002  pots  up   up             297$               0                          50/0/2
2000   voip  up   up             0.T                0  syst dns:sip12.e-fon.ch
20005  pots  up   up             0815440096$        0                     50/0/150
20006  pots  up   up             0815440097$        9                     50/0/2
voip translation debugging (call from 0794142975 to 0815440097):
=========================================
Mar  8 22:35:26.145 METD: //-1/73E51DB2834F/RXRULE/regxrule_stack_pop_RegXruleNumInfo: stack=0x46FBFCA0; count=1
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_stack_push_RegXruleNumInfo: stack=0x46FBFCA0; count=0
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_profile_translate_internal: number=0794142975 type=unknown plan=unknown numbertype=calling
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_profile_match_internal: Matched with rule 2 in ruleset 40
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_profile_match_internal: Matched with rule 2 in ruleset 40
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/sed_subst: Successful substitution; pattern=0794142975 matchPattern=(.*) replacePattern=9\1 replaced pattern=90794142975
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_subst_num_type: Match Type = none, Replace Type = none Input Type = unknown
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_subst_num_plan: Match Plan = none, Replace Plan = none Input Plan = unknown
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_profile_translate_internal: xlt_number=90794142975 xlt_type=unknown xlt_plan=unknown
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_profile_translate_internal: number= type=unknown plan=unknown numbertype=redirect-called
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_get_RegXrule: Invalid translation ruleset tag=0
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_profile_match_internal: Error: ruleset for redirect-called number not found
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_profile_translate_internal: No match: number= type=unknown plan=unknown
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_profile_translate_internal: number=0815440096 type=unknown plan=unknown numbertype=called
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_match: No match; number=0815440096 rule precedence=2
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_match: No match; number=0815440096 rule precedence=3
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_profile_match_internal: No match found
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_profile_translate_internal: No match: number=0815440096 type=unknown plan=unknown
Mar  8 22:35:26.149 METD: //-1/73E51DB2834F/RXRULE/regxrule_stack_push_RegXruleNumInfo: stack=0x46FBFCA0; count=1
Mar  8 22:35:26.153 METD: //-1/73E51DB2834F/RXRULE/regxrule_dp_translate: No profile found in peer 20005 for outgoing direction
Mar  8 22:35:26.153 METD: //-1/73E51DB2834F/RXRULE/regxrule_dp_translate: calling_number=90794142975 calling_octet=0x0
        called_number=0815440096 called_octet=0x0
        redirect_number= redirect_type=0 redirect_plan=0        redirect_PI=-1 redirect_SI=-1
Mar  8 22:35:26.181 METD: //-1/73E51DB2834F/RXRULE/regxrule_stack_pop_RegXruleNumInfo: stack=0x46FBFCA0; count=2
Thanks,
Norbert

Hi Alex,
Thank you for the reply.
After changing the "incoming called-number" I got the same output.
The weird think is, why the dial-peer debug shows the 0815440096 number, despite the right "to: number" in the SIP-Message.
Is there a problem with the "voice service voip" or "sip-ua"?
on the voice translation debug I see:
Match Rule=DP_MATCH_TO_URI; URI=sip:0815440097
Match Rule=DP_MATCH_FROM_URI; URI=sip:0819262424
But I guess the translation rule is maching this one:
Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=0815440096
So how can the voice translation rule be set to map the entry DP_MATCH_TO_URI; URI=sip:0815440097
Thanks for the help.
Regards,
Norbert
voip translation debugging (call from 0819262424 to 0815440097):
===================================================
Mar  9 07:45:16.371 METD: //-1/439ABF97847F/RXRULE/regxrule_stack_pop_RegXruleNumInfo: stack=0x46FBFAFC; count=1
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_stack_push_RegXruleNumInfo: stack=0x46FBFAFC; count=0
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_translate_internal: number=0819262424 type=unknown plan=unknown numbertype=calling
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_match_internal: Matched with rule 2 in ruleset 40
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_match_internal: Matched with rule 2 in ruleset 40
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/sed_subst: Successful substitution; pattern=0819262424 matchPattern=(.*) replacePattern=9\1 replaced pattern=90819262424
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_subst_num_type: Match Type = none, Replace Type = none Input Type = unknown
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_subst_num_plan: Match Plan = none, Replace Plan = none Input Plan = unknown
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_translate_internal: xlt_number=90819262424 xlt_type=unknown xlt_plan=unknown
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_translate_internal: number= type=unknown plan=unknown numbertype=redirect-called
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_get_RegXrule: Invalid translation ruleset tag=0
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_match_internal: Error: ruleset for redirect-called number not found
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_translate_internal: No match: number= type=unknown plan=unknown
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_translate_internal: number=0815440096 type=unknown plan=unknown numbertype=called
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_match: No match; number=0815440096 rule precedence=2
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_match_internal: Matched with rule 3 in ruleset 192
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_match: No match; number=0815440096 rule precedence=2
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_match_internal: Matched with rule 3 in ruleset 192
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_match: No match; number=0815440096 rule precedence=2
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/sed_subst: Successful substitution; pattern=0815440096 matchPattern=^0815440096 replacePattern=296 replaced pattern=296
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_subst_num_type: Match Type = none, Replace Type = none Input Type = unknown
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_subst_num_plan: Match Plan = none, Replace Plan = none Input Plan = unknown
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_profile_translate_internal: xlt_number=296 xlt_type=unknown xlt_plan=unknown
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_stack_push_RegXruleNumInfo: stack=0x46FBFAFC; count=1
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_dp_translate: No profile found in peer 20001 for outgoing direction
Mar  9 07:45:16.375 METD: //-1/439ABF97847F/RXRULE/regxrule_dp_translate: calling_number=90819262424 calling_octet=0x0
        called_number=296 called_octet=0x0
        redirect_number= redirect_type=0 redirect_plan=0        redirect_PI=-1 redirect_SI=-1
Mar  9 07:45:16.379 METD: //-1/439ABF97847F/RXRULE/regxrule_vp_translate: No profile found in voice port or trunk group for outgoing direction
Mar  9 07:45:16.379 METD: //-1/439ABF97847F/RXRULE/regxrule_vp_translate: calling_number=90819262424 calling_octet=0x0
        called_number=296 called_octet=0x0
        redirect_number= redirect_type=0 redirect_plan=0
Mar  9 07:45:18.195 METD: //-1/439ABF97847F/RXRULE/regxrule_stack_pop_RegXruleNumInfo: stack=0x46FBFAFC; count=2
debug voice dialpeer detail
=====================
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
  Dial String=0815440096, Expanded String=0815440096, Calling Number=0815440096T
   Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer:
   Result=Success(0); Outgoing Dial-peer=2000 Is Matched
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer:
   Result=Success(0); Outgoing Dial-peer=20005 Is Matched
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_ANSWER; Calling Number=0819262424
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=0819262424T
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_ORIGINATE; Calling Number=0819262424
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=0819262424T
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.572 METD: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer:
   Result=Success(0); Incoming Dial-peer=2000 Is Matched
Mar  9 07:49:25.576 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_ANSWER; Calling Number=0819262424
Mar  9 07:49:25.576 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.576 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=0819262424T
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.576 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.576 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_ORIGINATE; Calling Number=0819262424
Mar  9 07:49:25.576 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.576 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=0819262424T
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.576 METD: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer:
   Result=Success(0); Incoming Dial-peer=2000 Is Matched
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_REQUEST_URI; URI=sip:[email protected]:5060
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpAssociateIncomingPeerCore:
  Match Rule=DP_MATCH_TO_URI; URI=sip:[email protected]:5060
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpAssociateIncomingPeerCore:
  Match Rule=DP_MATCH_FROM_URI; URI=sip:[email protected]:5061
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_INCOMING_DNIS; Called Number=0815440096
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Dial String=0815440096, Expanded String=0815440096, Calling Number=
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_ANSWER; Calling Number=0819262424
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=0819262424T
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_ORIGINATE; Calling Number=0819262424
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=0819262424T
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.576 METD: //-1/D8245087848D/DPM/MatchNextPeer:
   Result=Success(0); Incoming Dial-peer=2000 Is Matched
Mar  9 07:49:25.584 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=296, Expanded String=296, Calling Number=296T
   Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.584 METD: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer:
   Result=Success(0); Outgoing Dial-peer=20001 Is Matched
Mar  9 07:49:25.584 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_ANSWER; Calling Number=296
Mar  9 07:49:25.584 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.584 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=296T
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.584 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.584 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_ORIGINATE; Calling Number=296
Mar  9 07:49:25.584 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.584 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=296T
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.584 METD: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer:
   Result=Success(0); Incoming Dial-peer=20001 Is Matched
Mar  9 07:49:25.584 METD: //-1/D8245087848D/DPM/dpMatchCore:
   Dial String=296, Expanded String=296, Calling Number=
   Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.584 METD: //-1/D8245087848D/DPM/MatchNextPeer:
   Result=Success(0); Outgoing Dial-peer=20001 Is Matched
Mar  9 07:49:25.588 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=90819262424, Expanded String=90819262424, Calling Number=
   Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.588 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.592 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=0819262424, Expanded String=0819262424, Calling Number=
   Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.592 METD: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer:
   Result=Success(0); Outgoing Dial-peer=2000 Is Matched
Mar  9 07:49:25.592 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_ANSWER; Calling Number=296
Mar  9 07:49:25.592 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.592 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=296T
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.592 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
   Match Rule=DP_MATCH_ORIGINATE; Calling Number=296
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchPeertype:
   Is Incoming=TRUE, Number Expansion=FALSE
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=, Expanded String=, Calling Number=296T
   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer:
   Result=Success(0); Incoming Dial-peer=20001 Is Matched
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=296, Expanded String=296, Calling Number=
   Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer:
   Result=Success(0); Outgoing Dial-peer=20001 Is Matched
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=90819262424, Expanded String=90819262424, Calling Number=
   Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=90819262424, Expanded String=90819262424, Calling Number=
   Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Result=-1
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:
   Dial String=296, Expanded String=296, Calling Number=
   Timeout=TRUE, Is Incoming=FALSE, Peer Info Type=DIALPEER_INFO_SPEECH
Mar  9 07:49:25.596 METD: //-1/xxxxxxxxxxxx/DPM/MatchNextPeer:
   Result=Success(0); Outgoing Dial-peer=20001 Is Matched

Similar Messages

  • Iphone 5: Incoming Calls won't go through.

    Hello everyone,
    I purchased the Iphone 5 about 1-2 weeks ago and so far i love it. However as of recently i've been expeirencing a few issues where incoming calls won't go through.
    I'll try my best to break it down:
    Someone calls me.
    Phone "rings" on their side.
    My iPhone doesn't ring.
    I get no notification of a missed call, and maybe a few minutes later i'll be alerted to a missed call or a voicemail.
    I've tested various things that i assume would cause the issue, but so far none of them seem to be the case.
    I even went to Verizon (a few minutes ago actually) and they did a soft-reset (pretty much what i did prior) and soon as i got home i called the phone and nothing went through. I waited about a minute, called again, and then i rang. However seconds later i tried calling again, and it didn't ring.
    Also it happens are random times. First insident was a few nights ago around 10 PM. Then again a few days ago around 3 PM and finally this morning around 8-8:30 AM.
    No my "Do not disturb" isn't on.
    I have good (if not great) connection.
    At home the phone is always on WiFi
    Yes i've tried turning off LTE.
    Yes i've done a network reset.
    Yes, phone is up to date.
    One question i have is could it be only having this issue at my house? I have no way of testing if it only happens at my home (cause no one really has that kind of time to waste with me lol) so i'm not sure.

        I want to ensure those important calls get through Huxable! I understand why you are concerned!
    My first recommendation would be to make sure you are power cycling the device(turning off and on) at least once a day. This allows the device to refresh with the network and update the tower information on 4G handsets.
    Second, it will definitely be valuable to test the device in different locations to determine whether it is a location issue versus an equipment issue. If this happens in multiple locations for example, it is likely device related.
    If you find the issues occur mainly inside your home, the network extender accessory is an excellent option to boost indoor signal strength.
    http://bit.ly/AKkC
    Sincerely,
    JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

  • No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help? Thanks

    No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help me? Thanks

    This is an annoying problem for many people. Most likely your dock connector (on the bottom where you plug in your phone) is dirty or screwed up and is probably just coincidence that it happened after you updated. Some people have had success cleaning the port with a dry clean tooth brush. There is a long discussion going on at the thread I linked below. Good luck...
    https://discussions.apple.com/thread/2475631

  • SIP incoming call with G722-64 codec not working

    Hi, Guys.
    Have setup cube sip trunk to ITSP, incoming and outgoing calls are working. Except for an incoming call with g722 codec and video h263 (just need voice call). The called number does not even ring. The caller informed that his using polycom phone.
    Also, itsp provided 10 numbers for testing in which we can assigned to our phones but only the main number is working. When doing an incoming call, (dialing the other numbers except from the main number) can see always on the logs that itsp is always feeding the main number. I think it was because of the configuration under the sip-ua (register the maint number to a registrar)  but itsp informed that it was also their setup for other clients and is working. Appreciate your help on these.
    Thanks

    I have looked at your logs and here are my observations..
    1. When you disabled fast start on CUCM, I asked you to enable early offer on your CUBE, however I dont see this in your logs..
    This is the INVITE sent to your ITSP, as you can see, this doesnt contain any SDP, that suggest you are doing delayed offer..
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 172.21.8.134:5060;branch=z9hG4bKC862F
    From: <sip:[email protected]>;tag=AE7F464-1B0F
    To: <sip:[email protected]>
    Date: Thu, 03 Apr 2014 07:33:09 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces,histinfo,sdp-anat
    Min-SE:  1800
    Cisco-Guid: 0011462194-3037647155-0083893506-2887478836
    User-Agent: Cisco-SIPGateway/IOS-15.2.4.M4
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 102 INVITE
    Max-Forwards: 70
    Timestamp: 1396510389
    Contact: <sip:[email protected]:5060>
    History-Info: <sip:[email protected]:5060>;index=1,<sip:[email protected]:5060>;index=2
    Expires: 300
    Allow-Events: telephone-event
    Authorization: Digest username="AMM-4324-Trunk",realm="amcomvoice.ipsystems.com.au",uri="sip:[email protected]:5060",response="9555a4d29d9316d3f5d416f9a5096ee2",nonce="BroadWorksXhtjq88oeTdvuambBW",cnonce="6AFA84F5",qop=auth,algorithm=MD5,nc=00000001
    Content-Length: 0
    2. If you are doing DO, then your CUBE needs to send an answer to what your ITSP is offering in its ACK..but this is not happening
    Here is what I see..Your CUBE sends SDP in its PRACK
    Sent:
    PRACK sip:[email protected]2.147.134.21:5060;transport=udp SIP/2.0
    Via: SIP/2.0/UDP 172.21.8.134:5060;branch=z9hG4bKC9232B
    From: <sip:[email protected]>;tag=AE7F464-1B0F
    To: <sip:[email protected]>;tag=SD7qfu599-1874793413-1396510390487
    Date: Thu, 03 Apr 2014 07:33:09 GMT
    Call-ID: [email protected]
    CSeq: 103 PRACK
    RAck: 323009643 102 INVITE
    Allow-Events: telephone-event
    Authorization: Digest username="AMM-4324-Trunk",realm="amcomvoice.ipsystems.com.au",uri="sip:[email protected]2.147.134.21:5060;transport=udp",response="a9d772d988ec971cdad556fd4a992bd0",nonce="BroadWorksXhtjq88oeTdvuambBW",cnonce="58621262",qop=auth,algorithm=MD5,nc=00000002
    Max-Forwards: 70
    Content-Type: application/sdp
    Content-Length: 293
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 1079 7198 IN IP4 172.21.8.134
    s=SIP Call
    c=IN IP4 172.21.8.134
    t=0 0
    m=audio 17082 RTP/AVP 8 96 100
    c=IN IP4 172.21.8.134
    a=rtpmap:8 PCMA/8000
    a=rtpmap:96 telephone-event/8000
    a=fmtp:96 0-16
    a=rtpmap:100 X-NSE/8000
    a=fmtp:100 192-194
    a=ptime:20
    ###Here is your ACK to the 200 OK from ITSP###
    On the ACK...Your CUBE doesnt include any SDP in its ACK, hence your ITSP disconnected the call immediately
    ACK sip:[email protected]2.147.134.21:5060;transport=udp SIP/2.0
    Via: SIP/2.0/UDP 172.21.8.134:5060;branch=z9hG4bKCA1335
    From: <sip:[email protected]>;tag=AE7F464-1B0F
    To: <sip:[email protected]>;tag=SD7qfu599-1874793413-1396510390487
    Date: Thu, 03 Apr 2014 07:33:09 GMT
    Call-ID: [email protected]
    Max-Forwards: 70
    CSeq: 102 ACK
    Authorization: Digest username="AMM-4324-Trunk",realm="amcomvoice.ipsystems.com.au",uri="sip:[email protected]:5060",response="9555a4d29d9316d3f5d416f9a5096ee2",nonce="BroadWorksXhtjq88oeTdvuambBW",cnonce="6AFA84F5",qop=auth,algorithm=MD5,nc=00000001
    Allow-Events: telephone-event
    Content-Length: 0
    017151: Apr  3 07:33:11.089 UTC: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    BYE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 202.147.134.21:5060;branch=z9hG4bKahsb3f108gbhq8pbn5k1sdj0gkbf0.1
    From: <sip:[email protected]>;tag=SD7qfu599-1874793413-1396510390487
    To: <sip:[email protected]>;tag=AE7F464-1B0F
    Call-ID: [email protected]
    CSeq: 323009054 BYE
    Max-Forwards: 9
    Content-Length: 0
    I have two suggestions..
    1. Downgrade or upgrade your CUBE IOS. Something is not quite right with this behaviour
    2. Send your full sh run
    On your inbound call issue, you need to send me the logs for a call to another of your DDI..

  • How to limit incoming call on B-ACD CME?

    I have configure B-ACD on CME 4 and its working. But I have a problem with incoming call from outside (PSTN). I set queue-len for 30 queue. But on busy hour, some call hear only ring tone. No greeting tone or busy tone. When I check call session, its only 10 or 15 session.
    How to limit incoming call, let say, for 10 calls only? The 11th call will receive busy tone.
    Here are my config:
    application
    service queue flash:app-b-acd-2.1.2.2.tcl
    param queue-len 30
    param queue-manager-debugs 1
    param number-of-hunt-grps 1
    param aa-hunt2 0
    service aa flash:app-b-acd-aa-2.1.2.2.tcl
    paramspace english index 1
    param number-of-hunt-grps 1
    param handoff-string aa
    param dial-by-extension-option 1
    paramspace english language en
    param max-time-vm-retry 1
    param max-extension-length 7
    param aa-pilot 2999
    paramspace english location flash:
    param second-greeting-time 30
    param welcome-prompt _bacd_welcome.au
    param call-retry-timer 15
    param max-time-call-retry 60
    param voice-mail 0
    param service-name queue
    FYI: I have no voice mail. 'param voice-mail 0' is to send unanswered call to my operator.
    Regards,
    Iwan

    Hi Iwan,
    To restrict the number of calls to the application you need to configure only the appropriate number (10 in your example) of dial-peers to point to the AA Pilot number. Have a look;
    Set Up Incoming Dial Peers for AA Pilot Numbers
    In this task, you associate dial peers for incoming calls with the AA service that you want them to use.
    Cisco Unified CME B-ACD is available for outside calls through voice ports and trunks, for which dial peers must be set up. When you set up a dial peer, you use the service command to associate it with the name of the Cisco Unified CME B-ACD AA service that you want callers to that dial peer to reach.
    Note You must configure a dial peer for each incoming DID voice port.
    To determine how many ports or trunks you must have for your Cisco Unified CME B-ACD service, consider the following:
    Total number of phones across all ephone hunt groups
    Total number of slots in the queues across all queues
    Total number of PSTN ports feeding into the queues
    The number of simultaneous calls that Cisco Unified CME B-ACD can handle is limited by the number of PSTN ports, but these ports may not always be in use. For example, you could have three queues with ten slots per queue, but configure only 10 ports instead of 30 because you do not expect the three queues to ever be full at one time.
    From this good doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2305.html#wp1003323
    Hope this helps!
    Rob

  • IPhone 5 outgoing and incoming SMS works but incoming calls do not work. The dialler gets message this number is not in available in network.

    New I phone outgoing calls as well incoming SMS works but can not receive incoming calls. Caller gets the number does not exist in network.

         Like Superman, here I am to save the day! I can help you with your service in your home area dizzymslizzie. Let's start with what zip code are you in? Can I assume that there isn't any physical or liquid damage on the iPhone 5? Recently, there has been an update to the iPhone to iOS 7. If you have done this update then please provide the exact carrier version that's installed. Keep in mind that there is a difference in device performance between iOS 7 and the iOS 7 beta version. As you share this info, I will check the area to re-affirm that the issue is or is not network related.
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Incoming call shows Name - work/mobile/home of deleted contacts !!

    hi all,
    i have iphone with firmware 1.1.3
    I was trying to add a contact while on a call- a feature unavailable in 1.1.3
    while doing so, all my contacts were deleted and I did not sync with my computer.
    THough I do not have a contact in my contacts list, if one of my old contact calls me, his name is correctly displayed with work/home/mobile information.
    This means data is still there but not accessible nor visible? Has anyone encountered such an issue ?
    Trying to sync with computer does not show contacts that were "deleted"
    Any ideas to fix? Else i will upgrade phone firmware.
    Thanks
    Rajas

    I agree that I have old firmware and I should upgrade. Would the update restore my deleted contacts? I do not have unlocked phone or any Non-apple apps.
    I Added a contact with home and mobile#. I then deleted the home# and called my cell from the same deleted home#. The incoming call stil shows the correct information "Name - Home". This means the data is available somewhere in the phone but not visible.
    I tried to do a sync using iTunes 7.7.1 or latest. It only shows me Contacts that I added recently after all my contacts were erased. But when i get calls from those who were in my Contact list, I still see their names poping up when the call comes in and more over it identifies which phone they are calling from home/work/mobile/other. How is that ?
    Thanks
    Rajas

  • My i phone ringer is giving me a lot of trouble. It does not play any sound or music, the incoming call ringtone is working, but no music is playing. The problem itself disappears , and then reoccurs again. Anybody with same kind of problem, plz help !!!

    the iphone ringer is not working, the incoming call ringtones are playing , but ringer volume bar has disappeared. The problem itself gets fixed at times but i'm having a real tough time . I have almost tried evrything from resetting the phone, switiching it off and do it gain, but nothing seems to work. A nybody with anykind of knowledge reguarding this problem, please help!!

    Unfortunately, this is not Apple, but just the iPod Community forum, of iPod Classic end users, who shares your angst. You can post it to iPod Feedback

  • For incoming calls ringtone not working

    My incoming calls are only identifiable with display to ANSWER or DECLINE.   I. Can get vibrate to work  but ringtones not working.  I am missing many calls
    because of no ring.  I did shut down my Bluetooth earpiece so unsure what happened.

    These are a couple of articles that might help.
    http://docs.info.apple.com/article.html?artnum=305740
    http://docs.info.apple.com/article.html?artnum=305744
    Try a reset first then if that does not work, you might want to restore.

  • Ignore incoming calls occasionally not working

    I've run into odd behavior that happens intermittently on the Tour device.
    An incoming call comes in. The user presses the red key to "ignore" the call. The incoming call temporarily halts, but then resumes ringing the phone. Pressing the red "ignore" key again yields the same results. This happens maybe 1 in 5 incoming calls. The rest of the time the red "ignore" key works as it should - rejecting the call.
    Is this a known issue in the Tour? Is there a patch or work around?

    The Network Preference is checked, to Notify me of incoming calls while connected to the internet.

  • Incoming mailserver won`t work after Yosemite upgrade

    My incoming emailserver (pop.online.no) suddenly stopped working after upgrading to OS X Yosemite on my Macbook Pro 2013.
    I have checked all the settings, and all seems to be correct, apart from it won't download any e-malis anymore.
    (My outgoing emails from smtp.online.no seems to work fine though).
    What can I do to get this fixed? Everything seems to be correct in all fields. But my Mail won´t establish any contact with my incoming pop.online.no account.

    Hey there SirOlsen,
    It sounds like you are unable to receive mail, but you seem to be able to send it without issue. I would use the Connection Doctor to help you troubleshoot the issue here:
    OS X Mail: Troubleshooting sending and receiving email messages
    You may even need to remove, and readd the account from your Internet Accounts pane of System Preferences:
    Add your Twitter, Facebook, and other Internet Accounts - Mac Help
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • IMessage and calling won't work with one person?!

    My iMessage works with everyone except one person. I can text them or call them, but I can't get anything from them. How can I fix this?!

    The issue is likely on their end if it works with everyone else. Double check the information for them in their contact to make sure its correct or try deleting and re-adding it just to be sure but its likely that their imessage either isn't activated or they don't have data service where they are at.

  • Skype video call won't work

    Hi every body, I've had a mac book air 2012 for almost a year now and have been using Skype avidly however recently after the Maverick update Skype does not work so well. When I try and do a video call I will be able to see the person at the other end but it will just say that my video picture is loading and the little green camera light wont come on. Any suggestions?

    https://discussions.apple.com/message/23627865#23627865

  • Facebook video calling won't work after upgrading

    i have tried diffrent browsers . still no solution . i see myself instead of the other person ..

    No can do, David.  I have a board that supports quad SLI.  Windows 8.1 x64 recognizes two cards just fine.  But when a third, is added, or two more at once, I mean, there is -nothing-, absolutely nothing in the device manager to suggest that
    any device is added, period.  Not that it matters, but the cards are two RADEON 290x s, a radeon 7590, and a radeon 5850.  These all work fine on other systems, and actually, other windows 8.1 installs.  All updates added, all chipset drivers
    added, and all these cards work off of the newest catalyst drivers, 13.12, which supersedes any beta 13.11 version.  Does not matter out of the myriad of ways the cards are entered, which order, how many, etc.  Over two?  "it" will choose the
    one or two it seems, and absolutey nothing will come up in device manager, even under "view by connections."  It's as if the x16 slots housing the added cards, or cards 4 or more if tried at once, are seen as vacant.
    If I could get windows to recognize a -device- is added in a proper x16 slot, properly configured, that, I might be able to work with.   I must have completely uninstalled catalyst versions and installed
    them over 100 times in testing.  It doesn't matter.  Catalyst cannot shift over drivers to a card or cards that windows itlelf doesn't "see."  I've tried a huge number of different things, but short of not scaling up with windows 8.1, nothing
    seems to be working.  Windows 7 x64 seems to not be the genesis of "missing card" trouble in that op system.  That, is wonky catalyst.  But windows 8.1 has yet even given catalyst a chance to mess things up, and sometimes "forget" cards on reboot.

  • NEW 9320! CURVE HANGS ...!DURING INCOMING CALLS! NO BUTTON WORKS! PLS HELP ME

       Recently, i was purchased New 9320. I am very much fedup with this new 9320The phone completely hangs during my incoming calls , no button works & nothing happens. . Each and every time I’ve  to remove the battery & reboot 4 to 5 times.
     This happened once when it was in the holster too ,said “keypad locked” and nothing except the power off button worked (the power off button did nothing to help though)
        This is frustrating ,especially for a first time Blackberry user like me
       Is it a software problem with the 7.1 OS or something else? Please any one help me.

    That is what I am doing right now, but thats a short term solution. It happens 7-10 times a day. Have to do this exercise again and again.
    Is not there a permanent solution for this problem ?
    Thanks

Maybe you are looking for

  • MBP Failing Hard Drive

    My late 2007 15" MBP seems to be having a hard drive on the edge of failure. Coincidence or not, it comes the day after the Apple Store replaced my logic board because of the NVidia card failure associated with the black scrren of death. No indicatio

  • Mac Book Pro with 2 or 4 core?

    I use Lightroom a lot and am looking at getting a new Mac Book Pro to speed things up and to replace my Mac Book (I need a laptop for location tethered shooting) Will I see a big difference between a 2 or 4 core model, or is the processor speed more

  • Deleting duplicate contact groups

    My iPhone has two contact groups of the same name. One of the duplicate group's is empty. One has appropriate contacts. My computer's address book does not have the same duplication. Yet, when I sync through iTunes the duplicate group still remains o

  • Zen Sleek problem! Blank, Black Scr

    Ok, I installed the disk that was included and windows media 0. I charged my zen, but I cannot see anything but a blank, black screen. Sometimes I can hear music, sometimes I cant', can anyone help me out? I have unplugged the zen sleek a few times t

  • Lion Permissions

    I have a white macbook with lion installed for about 2 months. I was on a plane ride to Hawaii for school, and I tried opening Photoshop CS3, but I got an error about not having the right permissions to open it. I created another account (called test