(Solved) compiz 0.9.12.1-2 Will not build

Hello,
       Just went to update to 0.9.12.1-2 and it stopped building with a error. (  mkdir: cannot create directory 'build': File exists   )
    Looks like this is a new package update as of today 3-18-2015.  I will look deeper to see if I can find a fix.
Last edited by sliposk (2015-03-18 15:27:47)

Hello folks. I've added a small fix for building compiz/compiz-bzr with CMake 3.2. See comments for either package.
@karol The real error was related to CMake. The mkdir error came from not having a clean srcdir. Compiz needs to be built in a separate directory which cannot be created twice.
Last edited by Chazza (2015-03-19 11:27:20)

Similar Messages

  • Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing Is there a fix for UConnect issue?

    Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing it does is list all the songs alphabetically when connected via USB.

    - Contact the manufacturer/go to their support site.
    - Sometimes this works
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    Sometimes and ISO update breaks compatibioity and a firmware update the the dock is required or an iOS update is required.
    Downgrading the iOS is not supported by Apple.

  • Elements 12 will not build previews

    Elements 12 will not build previews but is shown as a Programme Error - how do you fix it ?

    Hi peter gillard,
    Try steps mentioned in given link below and let me know in case you face any issues:-
    http://helpx.adobe.com/creative-suite/kb/change-system-default-printer.html
    Sarika

  • BETA 10.1.3.1 User Task will not build

    I have a simple process which initiates a User Task running under 10.1.2.0.2. I have opened this up in JDEV 10.1.3.1 and tried to build the project.
    This does not work, and the following messages are produced :
    Project: T:\ManualExceptionHandler\ManualExceptionHandler\ManualExceptionHandler.jpr
    T:\ABI07-ManualExceptionHandler\ManualExceptionHandler\bpel\ManualExceptionHandler.bpel
    Error: Failed to compile classes.
    Failed to compile the generated BPEL classes for "ManualExceptionHandler".
    T:\ABI07-ManualExceptionHandler\ManualExceptionHandler\public_html\manualErrorHandlingUserInteraction_WF_Form.jsp
    Error: WorklistService not found
    Error: oracle.tip.pc.services.hw.task.tasktype.impl not found
    Error: oracle.tip.pc.api.worklist.payload not found
    Error: WorklistConstants not found
    Error: PayloadUtil not found
    Error(30,3): identifier WorklistService not found
    Error(32,3): identifier PayloadConstant not found
    Error(33,3): IWorklistContext not found in class manualErrorHandlingUserInteraction_WF__Form
    Error(35,3): identifier PayloadConstant not found
    Error(37,3): identifier PayloadConstant not found
    Error(38,3): IWorklistTask not found in class manualErrorHandlingUserInteraction_WF__Form
    Error(45,3): Form not found in class manualErrorHandlingUserInteraction_WF__Form
    Error(45,3): identifier PayloadFormGenerator not found
    Error(49,3): identifier PayloadConstant not found
    Error(52,3): identifier PayloadConstant not found
    Error(54,3): identifier PayloadConstant not found
    Error(57,3): identifier PayloadFormGenerator not found
    Error(61,3): identifier PayloadFormGenerator not found
    Error(72,17): identifier PayloadConstant not found
    Error(90,43): identifier PayloadFormGenerator not found
    Error(98,24): identifier PayloadUtil not found
    Error(107,17): identifier PayloadConstant not found
    Error(125,9): Field not found in class manualErrorHandlingUserInteraction_WF__Form
    Error(139,37): identifier PayloadFormGenerator not found
    Error(139,122): identifier PayloadFormGenerator not found
    Error(140,20): identifier PayloadFormGenerator not found
    Error(140,114): identifier PayloadUtil not found
    Error(141,48): identifier PayloadUtil not found
    Error(141,130): identifier PayloadFormGenerator not found
    Error(151,18): identifier PayloadUtil not found
    Error(161,13): identifier PayloadUtil not found
    Error(166,13): identifier PayloadUtil not found
    I will not be able to continue doing much testing, as this process is invoked from every process....
    Please advise.
    Pete

    I don't know where you got the 10.1.3 jdev. Can you get the lattest jdev and try. You need to install latest BPEL engine to deploy the 10.1.2 process from jdev 10.1.3.

  • Linux 3.14.2-1 ARCH config error - will not build with ABS [SOLVED]

    Hi Guys,
    I need to compile my kernels with ABS because I need 16 DVB adaptors instead of 8. This works normally just fine. Today I tried to compile newest kernel and got following error during config. For the record 3.14.1-1 built just fine.
    Makefile:615: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong not supported by compiler
    SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h
    SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_64.h
    SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_x32.h
    SYSTBL arch/x86/syscalls/../include/generated/asm/syscalls_32.h
    SYSHDR arch/x86/syscalls/../include/generated/asm/unistd_32_ia32.h
    CHK include/config/kernel.release
    SYSHDR arch/x86/syscalls/../include/generated/asm/unistd_64_x32.h
    UPD include/config/kernel.release
    SYSTBL arch/x86/syscalls/../include/generated/asm/syscalls_64.h
    WRAP arch/x86/include/generated/asm/clkdev.h
    CHK include/generated/uapi/linux/version.h
    UPD include/generated/uapi/linux/version.h
    CHK include/generated/utsrelease.h
    UPD include/generated/utsrelease.h
    HOSTCC arch/x86/tools/relocs_32.o
    HOSTCC arch/x86/tools/relocs_64.o
    HOSTCC arch/x86/tools/relocs_common.o
    HOSTLD arch/x86/tools/relocs
    CC kernel/bounds.s
    gcc: error: unrecognized command line option ‘-fstack-protector-strong’
    /home/server/core/linux/src/linux-3.14/./Kbuild:35: recipe for target 'kernel/bounds.s' failed
    make[1]: *** [kernel/bounds.s] Error 1
    Makefile:884: recipe for target 'prepare0' failed
    make: *** [prepare0] Error 2
    ==> ERROR: A failure occurred in prepare().
    Aborting...
    Thanks for the help
    Last edited by wdirksen (2014-05-02 20:31:32)

    wdirksen wrote:...I just moved to New Zealand...
    Beautiful part of the the world... you just need to watch out for Saruman and his orc army
    wdirksen wrote:... and the packages in the NZ mirror are not all in sync at the same time.
    Use reflector....
    % which upp
    upp: aliased to reflector -c "United States" -a 1 -f 3 --sort rate --save /etc/pacman.d/mirrorlist && cat /etc/pacman.d/mirrorlist && sudo pacman -Syyu
    You need to `chmod youruser:yourgroup /etc/pacman.conf` for that to work if run by non-root.
    Last edited by graysky (2014-05-02 20:33:38)

  • [SOLVED] transmission remote gui svn will not build

    This is what I get when trying to compile from AUR:
    http://code.google.com/p/transmisson-remote-gui/issues/detail?id=410&colspec=ID%20Type%20Status%20Priority%20Stars%20Milestone%20OpSys%20SummaryNote: environment config file not found - using defaults
    NOTE: miscellaneous options file not found - using defaults
    TLazPackageGraph.CheckIfPackageNeedsCompilation No state file for trcomp 1.0
    [TExternalToolList.Run] CmdLine="/usr/bin/fpc -B -MObjFPC -Scgi -O1 -gl -vewnhi -l -Fu/usr/lib/lazarus/lcl/units/i386-linux -Fu/usr/lib/lazarus/lcl/units/i386-linux/gtk2 -Fu/usr/lib/lazarus/packager/units/i386-linux -Fu/var/abs/local/yaourtbuild/transmission-remote-gui-svn/src/transmission-remote-gui/ -Fu. -FU/var/abs/local/yaourtbuild/transmission-remote-gui-svn/src/transmission-remote-gui/lib/i386-linux/ -dLCL -dLCLgtk2 trcomp.pas" WorkDir="/var/abs/local/yaourtbuild/transmission-remote-gui-svn/src/transmission-remote-gui/"
    Hint: Start of reading config file /etc/fpc.cfg
    Hint: End of reading config file /etc/fpc.cfg
    Free Pascal Compiler version 2.4.2 [2010/11/14] for i386
    Copyright (c) 1993-2010 by Florian Klaempfl
    Target OS: Linux for i386
    Compiling trcomp.pas
    Compiling vargrid.pas
    Compiling varlist.pas
    vargrid.pas(74,28) Hint: Parameter "Sender" not used
    vargrid.pas(441,41) Error: Wrong number of parameters specified for call to "DrawGridCheckboxBitmaps"
    grids.pas(3877,23) Hint: Found declaration: TCustomGrid.DrawGridCheckboxBitmaps(const LongInt,const LongInt,const TRect,const TCheckBoxState);
    vargrid.pas(540,47) Error: Wrong number of parameters specified for call to "DrawGridCheckboxBitmaps"
    grids.pas(3877,23) Hint: Found declaration: TCustomGrid.DrawGridCheckboxBitmaps(const LongInt,const LongInt,const TRect,const TCheckBoxState);
    vargrid.pas(1002) Fatal: There were 2 errors compiling module, stopping
    TExternalToolList.Run Exception: /var/abs/local/yaourtbuild/transmission-remote-gui-svn/src/transmission-remote-gui/vargrid.pas(1002) Fatal: There were 2 errors compiling module, stopping
    ERROR: tool reported error
    This also happens with some arbitrary svn versions 519,410 and 300. I've also posted here:
    http://code.google.com/p/transmisson-re … %20Summary
    Last edited by swanson (2011-04-08 07:31:20)

    Finally! Lazarus 0.9.28 easily compiled from source manually. And install fpc 2.4.0 from ARM. Then I had to edit the PKGBUILD and delete 'lazarus' as dependency since it otherwise wuold install 0.9.30 again.. . Violá! Compiled and really seems to be working. One problem was that lazarus 0.9.28 wasn't in the ARM.
    EDIT; instructions;
    Download lazarus 0.9.28: http://mirrors.iwi.me/lazarus/releases/ … rc.tar.bz2
    fpc 2.4.0: http://arm.konnichi.com/community/os/i6 … pkg.tar.gz
    Uninstall any previuos fpc and lazarus
    Install downloaded fpc (pacman -U fpc-2.4.0-1-i686.pkg.tar.gz)
    Unpack compile and install lazarus (make clean all, make install)
    Begin install transgui - yaourt -S transmission-remote-gui-svn - during install edit PKGBUILD and delete the makedepends 'lazarus'. Continue build. Should be ok.
    Maybe it's possible to do a PKGBUILD on lasarus 0.9.28, and an alernative  one for transgui but it's a bit over my horizon.
    Last edited by swanson (2011-04-09 05:51:52)

  • DVDSP Slideshow will not Build...

    Hi, I'm wrinting this because I simply cannot build my iphoto slideshows to DVD. Here is what I have done. Maybe I've done something wrong.
    I have 7 slideshows from iPhoto that I would like to put into a DVD using DVDSP3. My intentions are to open up with a 15sec intro. Following that intro will be the main menu featuring a submenu for every slideshow. Totaling 7 submenus.
    What I did was I took the intro mov and placed it in track 1. I then linked track one to the main menu. I then placed the slideshows from the "stills" tab, onto the menu. I added a background song to the menu, and placed songs to go along with each slideshow.
    Finally, I hit build/burn and let it go. It gets to about the 75-80% mark and then it brings up an error.
    "Slideshow 5:Invalid Video Asset"
    That sounds to me like one of the files can't be understood by DVDSP3. But all the files are the same. The pictures are ALL JPEG / 720x480 / 8-bit / RGB.
    PLEASE HELP!
    Thanks
    Paul

    Chris,
    Thanks for the help! I got it to work. Thankfully I saved all the original pictures as uncompressed psd's so I didn't loose any quality when I saved them as picts. So I was able to build and burn the final project to a DVD and view it on my home DVD player.
    On the other hand, I now have a new problem. It seems that 2 of my 7 slideshows "skrew up" at the end of the their play. I'll explain...
    I have each slideshow aligned to audio. I will click on the first slideshow to begin the entire movie. The movie will go fine until it hits the END of the 3rd slideshow. When it does, it begins the 4th slideshow slide and then skips back to halfway through the 3rd slideshow. It also does this to my last show as well! What the heck is going on?!
    The beauty of this is, when I click on the individual chapters, they don't do it. Please help, I want to get this project OUT!
    Thanks
    Paul

  • FlexUnit4SampleCIProject will not build for me with build.air.xml

    I have I6 of Burrito. I downloaded the FlexUnit4SampleCIProject and followed set-up instrucitons on this page:
    http://docs.flexunit.org/index.php?title=Ant_Task
    When I leave in all the default source and run it using:
    ant -v -f build.air.xml clean package
    it goes for awhile and then fails with a:
    BUILD FAILED
    /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/build .air.xml:65: Could not create application descriptor
    What am I doing wrong? Here is the full log from terminal on my Mac running Snow Leopard with ant 1.8:
    admin-MacBookPro:FlexUnit4SampleCIProject brantner$ ant -v -f build.air.xml clean package
    Apache Ant version 1.8.1 compiled on September 21 2010
    Buildfile: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/buil d.air.xml
    Detected Java version: 1.6 in: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home
    Detected OS: Mac OS X
    parsing buildfile /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/buil d.air.xml with URI = file:/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject /build.air.xml
    Project base dir set to: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject
    parsing buildfile jar:file:/usr/share/java/ant-1.8.1/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/usr/share/java/ant-1.8.1/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file
    [property] Loading Environment env.
    Build sequence for target(s) `clean' is [clean]
    Complete build sequence is [clean, init, compile, test, package, ]
    clean:
       [delete] Deleting directory /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et
       [delete] Deleting directory /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/bin
       [delete] Deleting directory /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/dist
       [delete] Deleting directory /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/report
       [delete] Deleting directory /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et
    Build sequence for target(s) `package' is [init, compile, test, package]
    Complete build sequence is [init, compile, test, package, clean, ]
    init:
        [mkdir] Created dir: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et
        [mkdir] Created dir: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/bin
        [mkdir] Created dir: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/report
        [mkdir] Created dir: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/dist
    compile:
        [mxmlc] Loading configuration file /Applications/Adobe Flash Builder 4.5/sdks/4.5.0/frameworks/flex-config.xml
        [mxmlc] Required RSLs:
        [mxmlc]     framework_4.5.0.20135.swf with 1 failover.
        [mxmlc]     textLayout_2.0.0.232.swf with 1 failover.
        [mxmlc]     spark_4.5.0.20135.swf with 1 failover.
        [mxmlc]     sparkskins_4.5.0.20135.swf with 1 failover.
        [mxmlc]     mx_4.5.0.20135.swf with 1 failover.
        [mxmlc] /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/bin/Main.swf (63438 bytes)
    test:
    [flexunit] Validating task attributes ...
    [flexunit] Generating default values ...
    [flexunit] Using the following settings for compilation:
    [flexunit]     FLEX_HOME: [/Applications/Adobe Flash Builder 4.5/sdks/4.5.0]
    [flexunit]     player: [air]
    [flexunit]     sourceDirectories: ["/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/sr c/main/flex"]
    [flexunit]     testSourceDirectories: ["/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/sr c/test/flex"]
    [flexunit]     libraries: ["/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/li bs/flexunit-aircilistener-4.1.0.swc","/Users/brantner/Documents/burrito/flexunit-flexunit- d3a56a1/FlexUnit4SampleCIProject/libs/flexunit-cilistener-4.1.0.swc","/Users/brantner/Docu ments/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/libs/flexunit-core-flex-4 .1.0.swc","/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIPr oject/libs/flexunit-uilistener-4.1.0.swc"]
         [null] Executing '/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java' with arguments:
         [null] '-jar'
         [null] '/Applications/Adobe Flash Builder 4.5/sdks/4.5.0/lib/mxmlc.jar'
         [null] '--version'
         [null]
         [null] The ' characters around the executable and arguments are
         [null] not part of the command.
         [null] Output redirected to property: SDK_VERSION
    [flexunit] Found SDK version: 4
    [flexunit] Created test runner at [/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/tar get/bin/TestRunner.mxml]
    [flexunit] Compiling test classes: [org.flexunit.demo.EchoPanelTest, org.flexunit.demo.SampleTest]
    [flexunit] Executing '/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java' with arguments:
    [flexunit] '-Xmx256M'
    [flexunit] '-jar'
    [flexunit] '/Applications/Adobe Flash Builder 4.5/sdks/4.5.0/lib/mxmlc.jar'
    [flexunit] '+flexlib'
    [flexunit] '/Applications/Adobe Flash Builder 4.5/sdks/4.5.0/frameworks'
    [flexunit] '+configname=air'
    [flexunit] '-output'
    [flexunit] '/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/tar get/bin/TestRunner.swf'
    [flexunit] '-source-path'
    [flexunit] '/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/src /main/flex'
    [flexunit] '/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/src /test/flex'
    [flexunit] '-library-path+=/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4Samp leCIProject/libs/flexunit-aircilistener-4.1.0.swc'
    [flexunit] '-library-path+=/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4Samp leCIProject/libs/flexunit-cilistener-4.1.0.swc'
    [flexunit] '-library-path+=/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4Samp leCIProject/libs/flexunit-core-flex-4.1.0.swc'
    [flexunit] '-library-path+=/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4Samp leCIProject/libs/flexunit-uilistener-4.1.0.swc'
    [flexunit] '-headless-server=true'
    [flexunit] '/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/tar get/bin/TestRunner.mxml'
    [flexunit]
    [flexunit] The ' characters around the executable and arguments are
    [flexunit] not part of the command.
    [flexunit]
         [null] Error redirected to property: MXMLC_ERROR
         [null] Loading configuration file /Applications/Adobe Flash Builder 4.5/sdks/4.5.0/frameworks/air-config.xml
         [null] /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/bin/TestRunner.swf (491869 bytes)
    [flexunit] Using the following settings for the test run:
    [flexunit]     FLEX_HOME: [/Applications/Adobe Flash Builder 4.5/sdks/4.5.0]
    [flexunit]     haltonfailure: [false]
    [flexunit]     headless: [false]
    [flexunit]     display: [99]
    [flexunit]     localTrusted: [true]
    [flexunit]     player: [air]
    [flexunit]     port: [1024]
    [flexunit]     swf: [/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/tar get/bin/TestRunner.swf]
    [flexunit]     timeout: [60000ms]
    [flexunit]     toDir: [/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/tar get/report]
    [flexunit] Setting up server process ...
    [flexunit] Starting server ...
         [null] Executing '/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java' with arguments:
         [null] '-jar'
         [null] '/Applications/Adobe Flash Builder 4.5/sdks/4.5.0/lib/adt.jar'
         [null] '-version'
         [null]
         [null] The ' characters around the executable and arguments are
         [null] not part of the command.
         [null] Output redirected to property: AIR_VERSION
    [flexunit] Opening server socket on port [1024].
    [flexunit] Waiting for client connection ...
    BUILD FAILED
    /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/build .air.xml:65: Could not create application descriptor
        at org.flexunit.ant.launcher.commands.player.AdlCommand.createApplicationDescriptor(Unknown Source)
        at org.flexunit.ant.launcher.commands.player.AdlCommand.prepare(Unknown Source)
        at org.flexunit.ant.launcher.contexts.DefaultContext.start(Unknown Source)
        at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
        at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.Target.execute(Target.java:390)
        at org.apache.tools.ant.Target.performTasks(Target.java:411)
        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1397)
        at org.apache.tools.ant.Project.executeTarget(Project.java:1366)
        at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
        at org.apache.tools.ant.Project.executeTargets(Project.java:1249)
        at org.apache.tools.ant.Main.runBuild(Main.java:801)
        at org.apache.tools.ant.Main.startAnt(Main.java:218)
        at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
        at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
    Total time: 18 seconds
    admin-MacBookPro:FlexUnit4SampleCIProject brantner$
    Thanks,
    Brian

    Mean the one for i6.. we monitor that as well.
    Or just reach out to me offline:
    my last name at digitalprimates dot net
    Mike

  • BETA 10.1.3.1 - Process will not build

    A process developed in JDEV 10.1.2.0.2 has been migrated to JDEV 10.1.3.1
    When I try and build the process I get this error :
    Project: T:\RecallCase\RecallCase\RecallCase.jpr
    T:\RecallCase\RecallCase\bpel\RecallCase.bpel
    Error: Failed to compile classes.
    Failed to compile the generated BPEL classes for "RecallCase".
    Not alot to go on, is there a more detailed log file somewhere?
    Pete

    i cannot build or make my business process which has no errors in the designer the error is:
    Error:
    [Error ORABPEL-10902]: compilation failed
    [Description]: in "bpel.xml", XML parsing failed because "undefined WSDL message.
    Message "{http://xmlns.oracle.com/service/employee}EmployeeTravelStatusResponseMessage" is not defined in WSDL at "file:/C:/OraBPELPM/integration/jdev/jdev/mywork/BusinessTravelProcess/BusinessTravelProcess2/employee.wsdl".
    i define the wsdl message & i clear the wsdl cashes & i still have the same error, any help, thanks
    Naim KANJ

  • Beta Photo library will not build.

    Able to open the icloud.com and Beta photo.  It just keeps saying building library......for hours,   This is new and usually it open right up.

    Please post in the Developers Forum as you agreed to. Beta Software cannot be discuss anywhere else as you were told when signing up for the Beta Testing Program.
    Cheers
    Pete

  • Disc will not build

    I'm trying to build a medium sized disc(2.3Gb) when it reaches "Muxing Menu 1 : Language 1 0% complete, it freezes and needs a force quit to get out of the window.
    Anyone got any ideas about what I'm doing wrong - I know 99% of the time it's operator error, but after a couple of hours of manual reading and fiddling I don't seem to be getting anywhere
    cheers

    Well after a couple of days of experimenting I can answer the question myself, what I did was to systematically replace , one by one all the files used with files from previous projects that were successful, doing a test build after each replacement. It turned out to be a layered photoshop file used in a menu. I still have no idea why this file caused the problem, I rebuilt the menu with another similar file and there were no problems. Weird things computers - I've just had compressor make an mp4 file that quicktime won't play!
    so it goes
    sigh

  • Tab Control will not build properly if "tab location" are on left or right.

    Using LV 6.1, try the following;
    Create a new vi. Place a Tab control,(from the Arrays & Clusters palette), on it's front panel. Right click on one of it's tabs and follow "Advance-->Tab Location-->select Left". Save your vi. Create a build for it and run the program. Does anyone know of a fix for this? Does this also happen on LV 7.1?
    Thanks

    That is good news to me. That probably means I am doing something different here.
    What happens to me is that when I create an executable of a VI which uses a Tab Control that has had its tabs set on the left or right of the control instead of its original location, the tabs are now all stacked on top of each other at the very bottom and the text labels are not shown.
    I don't know how else to explain this. I've attached a sample of a vi I used to test this. Please take a look at it.
    Thank you,
    Wil
    Attachments:
    Untitled.vi ‏9 KB

  • Creative Suite 6 Design and Web Premium will not Reinstall: Says Serial Number is not "Valid"

    Chat support has been no help.  I uninstalled Creative Suite 6 because I was having issues with some of the software and hoped that a reinstall would solve the problem.  Now the software will not reinstall.  It takes me to the validation screen where it asks for the serial number and says "We are unable to validate this serial number for CS6 Design and Web Premium.  Please contact customer service," when i type the serial number in.  I have now gone through THREE chat sessions with "customer support" in which they have sent me a link to download the same program, and it would not reload because of the serial number, and then have walked me TWICE through a multitude of tasks that have not solved the problem.  They keep asking me the same questions again and again, ignore my own questions to them, and cannot give me any information that actually helps.  The phone system will not support Creative Suite.  I NEED this software to reload as I've already missed one publishing deadline and will miss another if I cannot use this software, which, at the moment, seems to be a $350 coaster.
    This is the same disc I used to install the software originally.  I installed it on my old laptop and used it there without incident until my new laptop came (a period of about two months).  I then Uninstalled the software from the old lap top and installed it on the new one, again, without incident.  When I found that the icons for switching between tools in Photoshop and Illustrator were so small I could not see them, and they seemingly could not be adjusted within the program, I uninstalled the software, and at this point is when the software would not reinstall on the same computer it was on in the first place.  My software is official, on a physical disc, and registered to my account with Adobe.  What do I do?  I just opened this press five months ago, and I cannot justify a Creative Cloud membership with the amount of work I'm actually putting out at the moment, and especially not with the terrible customer service I have been receiving so far.
    Please help.

    If you never deactivated, and neither did they, then that is likely to be a reason for not being able to activate again.  Contact them thru chat and ask them to reset your activations.
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Calendar on MacBook Pro using Mavericks 10.9 will not sync with Google Apps for Business

    Ever since the Mavericks upgrade, I have had problems syncing my MacBook Pro Calendar with my Google Apps for Business Accopunt.  When Mavericks first came out, I could do a work-around and set up a second CalDev account and that worked for a while.  But with the most recent update to Mavericks, in part apparently to solve Google integration issies, the Calendar app will not sync either through the mail account setup in System pref, or by setting up a separate CalDev account.  I have no functioning Calendar on my MacBook, thogh the CalDev account option works fine on my iPhone and iPad, and of course all work on the PC with Google Apps Sync.
    Appreciate any advice, or better appreciate if Apple were to get this right ASAP.

    Thank you for your answer, unfortunately that is not the solution. I found the plug-in where it was already properly installed in the Root Level Library>Internet Plug-ins Folder.  It was NOT to be found in the [User Name]>Library>Internet Plug-Ins Folder, so I copied it there from the Root Level Folder, Rebooted, deleted all cookies, signed in to Netflix, and I still get the same:
    Thanks for installing
    Once installation is complete please restart your browser to watch this movie.
    So, I tried a complete re-install of Mavericks OSX 10.9, from scratch. I checked all Internet Plug-In Folders and the latest version Silverlight Plug-in is in all of them. Still, I get the same:
    Thanks for installing
    Once installation is complete please restart your browser to watch this movie.
    Any other Suggestions?

  • Editor will not open after Elements 11 is transferred from Mac Snow Leopard to OS 10.10.2 Yosemite

    I have been running Photoshop Elements 11 on a Mac with OS 10.6.8 (Snow Leopard). I've just got a new Mac with the latest OS X (OS 10.10.2, Yosemite). I transferred all my files to the new computer with Migration Assistant.
    The PSE 11 seemed to install fine and the Organiser opens OK, except that I get a message saying 'Some online services are unavailable' and asking if I want to go on without them. However when I try to open the Editor it won't open, instead I get two error messages, first 'Some of the application components are missing from the Application directory, please reinstall the application', and then 'A required application library failed to open and the product cannot continue. Please reinstall the application'.
    My questions are – should I just do a reinstall from the original disk? If so, should I do a complete uninstall of Elements 11 first? If I do a reinstall, will I lose any edits, version sets or anything else?
    I had been told that I should be able to simply transfer over the PSE 11, with the original product key no. Are there any incompatibilities between PSE 11 and the latest version of Yosemite?
    Thanks for any orientation,
    Nick

    You can never, never, never transfer any installed version of PSE on any platform. You must always install from scratch on a new machine. By trying to do so you have made more work for yourself. You will need to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    which will not seem to do anything, but is a necessary step to break the links within the program. Then you can go around and manually remove everything related to PSE that you can find, not only from Applications, but also from your username>library>preferences and the library at the top level of your hard drive>application support>adobe. You must go to these locations manually; spotlight will not help you with this type of search.
    Then you can reinstall from your original media or from the download here:
    Download Photoshop Elements products | 13, 12, 11, 10

Maybe you are looking for