Sopping Cart Issue, PR not Created

Hi,
A shopping cart was raised and as per the DOA it was gone through to levels of approvals. Two approvers had approved the shopping cart the status is still showing as "Awaiting Approval".
I have checked the transaction code BBP_PD for this shopping cart their were no follow-on documents generated and the PR has not be assigned.
I have checked the workflow, their also i could see that the workitems has been successfully completed at the two approvers levels.
Can any one explain how to make PR to be generated for this.
Regards
Vamshi

Hi Vamshi,
Is the config setting " Define Objects in Backend system" maintained correctly for the SC details. Please check the current status of SC in BBP_PD , is it I1111.
Recreate the scenario in Devlopment system and try to debug the transfer process of SC.
http://wiki.sdn.sap.com/wiki/display/SRM/TransferprocessoftheShopping+Cart.
Sc can be manually pushed through FM BBP_PD_SC_TRANSFER.
Thanks,
Anshu

Similar Messages

Purchase Order not created for a Shopping Cart

We have a few Shopping Carts created in SRM which did not transmit as PO to our backend R/3 system. This happened because our R/3 system went down for a couple of hours and the Shopping Carts were created during this time. We tried to submit these Shopping Carts through the Application monitor later and the SRM system gave a message "Processed Successfully". However, POs for these Shopping Carts were not created and the Shopping Carts have a status of "Item in transfer process".
The Shopping Carts have already got a PO number assigned to them through the SRM system. However these PO's have not been created in the backend R/3 system
We are struggling to find the failed RFC calls with the help of BASIS so that we can possibly reprocess them. Alternatively we are also looking for a way to retrigger the PO creation for these Shopping Carts.
I need ideas to resolve this issue.
Many thanks in advance.
Susmit

Not sure if you received an answer or not, but this is what we have had to do in the past:
1. Run BBP_PD for the shopping cart to see what the purchase requisition number will be on the backend system. The requisition number will still be provided even if it fails to transfer to the backend.
2. Run FM BBP_PD_SC_RESUBMIT. The object key field will be the requisition number; the object ID field will be the shopping cart number.
Hope this helps.
Monique Stephens

Shopping cart with Asset can not create backend PO in SOSC

Dear Expert,
We are using With SRM 7.0 & ECC 6.0 EHP4 , the shopping cart with account assignment cost center can create backend PO in SOSC, but the shopping cart with account assignment Asset can not create backend PO in SOSC.
The xml message is correct in SRM, but not correct in ECC.
Your help is very appreciated....
Best Regards,
bill

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Acrobat Standard (9.4.6) - Issue: "Acrobat could not create a new PDF form"

I have Adobe Acrobat Standard (version 9.4.6). I am trying to create a form but when I start the form wizard, locate the document to convert and click next, I get an error message "Acrobat could not create a new PDF form." What's wrong? (I've used this feature before in Adobe Pro so I am familiar with the process but I am using Standard now). It's not letting me upload my document (an MS Word 2003 document). Please, someone, anyone, help! I think I got a bad batch of software here. Any suggestions? If it's hopeless, who do I call for a replacement if that's the case? Is this software under warranty?

Hello Michael,
Thank you for your email. The file I am trying to convert to PDF and create a form with is a MS Office Word 2003 file. It isn't any specific file; the issue happens every time. I type my text in the Word doc and then proceed to open Adobe Acrobat Standard and use the wizard to create a form from an existing file. I tried to repairing the software but it does not help. Any other suggestions? Is this version of software defective? I really need this feature. I look forward to your reply. Thanks.
Angela

Work flow not created for the Shopping Cart

Hi one of the customers created a shopping cart,in approval overview it is showing as no need of approvals,but the status of approval is 'awaiting approval', but workflow is not created for the Shopping cart. advised to re-order in change mode but still no use. please advise.

Hi,
what do you see in SLG1? Check the below t.codes
SM58 - check for stuck remote function calls
ST22 - check for system dumps
SM13 - check for stuck update requests
SM21 - check in the system log for anything unusual
SWUD - run a consistency check on the workflow
Saravanan

Shopping cart not creating follow-on documents

Hi,
We were using extened classic for some time in test system and now deactivated extended classic and want to work with classic scenario. However when i create shopping cart for the material it is not creating any follow-on documents like reservation or purchase requisition or PO.
Can anyone guide me for possible reasons.
Thanks & Regards,
Ganesh

Hi Suresh,
I am able to create Reservation and/or Purchase Requisition for the shopping cart after maintaining the backend system for product category, but when i am creating shopping cart which should create PO, i am getiing error and status of shopping cart is "Error in Process".
After going through the transaction BBP_PD, the alert is as below-
Alerts that Could Belong to this Document:
Monitor            Shopping Basket\Backend application errors
Date               20.01.2006
Time               08:49:44
Message ID         BBP_ADMIN 016
Message text       Shopping cart &1 (PO &2): &3
Argument 1         5000000668
Argument 2         3300000002
Argument 3         MEPO                085Check item number 0 in tabl
Argument 4         00000000000000000000000000000000
Monitor            Shopping Basket\Backend application errors
Date               20.01.2006
Time               08:49:44
Message ID         BBP_ADMIN 016
Message text       Shopping cart &1 (PO &2): &3
Argument 1         5000000668
Argument 2         3300000002
Argument 3         06                010Document contains no items
Argument 4         00000000000000000000000000000000
Monitor            Shopping Basket\Backend application errors
Date               20.01.2006
Time               08:49:44
Message ID         BBP_ADMIN 016
Message text       Shopping cart &1 (PO &2): &3
Argument 1         5000000668
Argument 2         3300000002
Argument 3         MEPO                071Item 00010 does not exist
Argument 4         00000000000000000000000000000000
Can you throw some light on this, to solve the problem.
Thanks & Regards,
Ganesh

Shopping Cart is not creating Purchase Order

We are using SRM 4.0 in an extended classic version. We have been running into a couple of situation where that shopping cart that are created and approved are not creating PO in SRM. The follow-on document in the SC shows it's approved and the SC # but there is no purchase order linked to it.
I have looked in tcode BBP_PD but it's not yielding anything to this situation. I have also checked to make sure BBP_GET_STATUS is running and that is fine....so can someone point me in a direction to look?

Hi
<b>Please refer to follwoing SAP OSS notes as well.</b>
<u>Note 980017 - Follow-on document not created
Note 949162 Follow-on documents exist, status I1111 and I1113 active
Note 899006 - Status I1112 and I1113 even though subsequent doc exists
Note 1040670 Requirements are greyed out in the sourcing cockpit
Note 865797 BBP_ALERT_SB_NOTTRANSFERED: Incorrect status set
Note 854478 Alert monitor: No longer possible to transfer shopping cart
730239 Check status: Missing Backend reference
798604 Shopping cart monitor: Icon transfer inactive
729967 Shoppng cart:Status I1111,no follow-on docs->analysis report
728536 Shopping cart: Follow-on docs => analysis-/correction report
486246 Incorrect shopping carts offered for confirmation
Note 432434 'Item in the transfer process' for reservations</u>
Hope this will definitely help.
Regards
- Atul

Problem: Socket connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time

Problem: Socket
connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time
Environment: -
OS:
Windows XP SP2/7
Code:
VC 6.0
Dll: MFC
Problem Description: -
We have written a utility program which create socket (Using windows standard method [MFC]), and then make connection with another service (List Display) running
on port 3334 in different machine and retrieve the required list data. This program was working fine in almost all the machines.
But, we have received a severe intermittent issue on two machines. Client is facing issue in displaying the list data from port 3334.
Attempt: -
First we tried to debug code, and we come to know that socket is not creating in utility program. So we tried to telnet on ListDisplay service port 3334 and we were surprised that we were able to telnet, then we opened some more
telnet window on same port 3334 around (6 to 8) window, and each cmd connected properly. But we were not able to create socket from utility program.
Problem is severe because issue is intermittent.
We have tried all the way, but we are not able to figure it out, that what can be the exact problem and what are the conditions, when utility program will not
connect with ListDisplay service on port 3334.
Kindly assist to resolve this issue. For any help, we would be really thankful.

Hi,
According to your description, it seems that you have created an utility program which is making connection with another service port 3334, however, two clients are facing issue in display the data list from port 3334.
Port: 3334/TCP
3334/TCP - Known port assignments (1 record found)
Service
Details
Source
directv-web
Direct TV Webcasting
IANA
Since the port 3334 is used by directv-web service, I'd like to suggest check this service it is working well on the problematic clients.
1. The client can be resolved in DNS well? Please run "nslookup" in the prompt command.
2. Is there any 3rd party application interrupting? Do test in clean boot.
2. Strongly suggest you run process monitor tool to analysis it.
I am looking forward to your reply if you have any updated on your side.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

A User facing a issue of "Collaboration Folder is not created"

Dear All,
A user facing an issue of collaboration folder is not created even through they have created in the SRM Potal.
Can anybody put some light on the issue as soon as possible.
Thanks,
Pranav

Hi
Please refer below URL.
cFolder settings in SRM
Thanks
Karitkeya

CO-PA for good issue documents are not created

Dear All
We are using both account & cost based CO-PA , actually the problem is this that when we are doing the sales cycle, after billing my CO-PA document created but the same when I do delivery COGS document not created ,actually for sales I am taking the sales data from condition type(assignment of condition type to CO-PA value filed) and for COGS , I have assigned the COGS GL accounts in TRANSACTION Code OKB9 (automatic determine the profitability segment) also the same GL accounts I have assigned with value field in
Assignment PA transfer structure
Now when I am doing sales cycle , CO-PA document has been created when I am doing billing but when I am doing Good issue , CO-PA not created but if I go and check the GL account of COGS account I found the all detail of my profitability segment which hit this GL account
Please help in this regard.
Regards
Kashif

I assume that problem relates to billing in make-to-stock scenario. Since COPA document is automatically created with billing. Please note the following -
1. COGS GL account is not created as cost element.
2. There is no CO / COPA document at the time of delivery.
3. Condition type VPRS should exist in SD pricing. It is updated form material master.
4. Condition type VPRS should be assigned to COPA value field (just like PR00 / price).
5. Revenue and COGS value fields are updated at the time of billing.
Hope it clarifies.
Regards,

Issue opening or creating new files in illustrator CS5 windows 7 64bit, "Not Responding"

Issue opening or creating new files in illustrator CS5 windows 7 64bit, program becomes "Not Responding" when opening a file.
I had recently tried a trial version of FontExplorer Pro X, and this issue has come up after the Uninstallation of that program. Any suggestions?

Check for ant third party plugin in the plugin folder....?
Also Check in the new user account?
Message was edited by: Manish_1988

AnyConnect installation issues - Network Adapter is not created - cannot find any error?

I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access. I am about the only person with this installation issue, that I know of. When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect. I have turned off Firewall services, I've turned off SQL services, Citrix, etc. But nothing I have tried allows this to install correctly.
When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
Can anyone here point me in the right direction - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
Thank you!
Michael

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

AnyConnect installation issue - Network Adapter is not created - cannot find any error?

I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access. I am about the only person with this installation issue, that I know of. When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect. I have turned off Firewall services, I've turned off SQL services, Citrix, etc. But nothing I have tried allows this to install correctly.
When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
Can anyone here point me in the right direction - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
Thank you!
Michael

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

Shopping Cart with Service Item (SRM 7.02) - not created successfully

Hi Experts,
We have a requirement to create a Shopping Cart with Service Item (SRM 7.02) from PR Data coming from ECC via standard Proxy (PurchaseRequestERPSourcingRequest_In). But we are not able to create the SC with Service Items, though we are successfully able to create SC for Material Items successfully.
Please suggest, what can be the additional parameters to be passed in order to create a SC with Service Items in SRM 7.02.
Thanks in advance.
Regards,
Gaurav Gupta.

Hi Gaurav,
Thanks for your response, but we have standlone scenario( No ECC), we have the Service Hierarchy, Category and Product all setup for Service, yet the system is not creating the SC with Service Item via PR Data Coming in to SRM System.
Also, we tried the same directly from SRM system using describe what you need, and their as well the SC goes with Service category but when SC details are shown up it shows as Outline Item, where again we need to add subline using service category. Ideally i suppose it should take the Service Category which we added at the time of filling details in Describe what you need.
Please suggest, where in my main concern was in standalone SRM system if we have material PR data, then apart from the Category to be used Service is their any other parameter to be passed in, to create SC with Service Item.
Regards,
Gaurav

"Could not create a backup" Apple Configurator issue

I manage two carts of iPads (iOS 8.1.3) for my small junior high school. We use Apple configurator to supervise them and to Check out/Check in. I currently have four iPads that are in the setup assistant mode but the configurator still thinks they are checked out to students. When I attempt to check them in I get an error message that reads, "Could not create a backup. The device is showing the setup assistant" and when I show details it shows Code 4. Consequently, I cannot check out another device to these students as the Configurator thinks they have already been assigned a device.
Any ideas for me?
Thanks!

The first thing I would check are permissions on directories that Apple Configurator read/writes. Maybe something there is preventing the backup.
Also, I remember reading somewhere that the code 4 error sometimes happens if you don't turn off "Find My iPad."
You could also try putting your iPad into recovery mode then unsupervising it in Configurator... then re-supervising it and try restoring the backup.
Hope this helps!
~Joe

Sopping Cart Issue, PR not Created

Similar Messages

Maybe you are looking for