Spikes on network during software distribution or site Migration eventhough throttling enabled

Hello,
Maybe I am missing something here, but why am I getting Large Network traffic during site migration from sccm 2007 to 2012 and software distribution to Dps even when I have enabled Bandwidth throttling for the site/dps. Networking is trying to throttle
back the bandwidth, but said it is dynamic. Anyway to make this port a specific port?
Thanks,
Mark

Are you referring to the RPC traffic? If so, it uses the default dynamic RPC port range. That range can be shortened but that's an adjustment on operating system level and not in ConfigMgr.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

Software Distribution & Patching Design Issues - Migration of Packages SCCM 2007 to Application or Conventional Packages in SCCM 2012

Hi All
I am starting in discussion to deep root on Software Distribution & Patching model in large environments from SCCM 2007 migrating to SCCM 2012.
Below are certain assertions i am putting forward for your expert views or you may in a similar situation
1- I have migrated the packages from SCCM 2007 to SCCM 2012 as conventional methods, now i am deploying them [ not migrated the advertisements and collections ], so while deploying i am facing a peculiar situation that the deployment when created is of the
name "<<Package name>>(program)". I am not able to rename the deployment for the conventional packages. is there a way out to that??
2- Will the collection queries work the same in SCCM 2012 as was in SCCM 2007??
3- In SCCM 2012 Primary site there is default role called Site System role in that there is tab for proxy settings. I have observed that if do not check the proxy tab there and punch in proxy IP and port then after some time in the WSUS server the update
source and proxy server tab the proxy option gets unchecked and hence the sync in software update point status appears failed. Is that anyone else also has observed !!!!!
Regards Sushain KApoor

This is a duplicate of
https://social.technet.microsoft.com/Forums/en-US/2ddb8170-529b-4652-830e-fd0ade384b98/software-distribution-patching?forum=configmanagermigration
Please do not double post.
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2012 R2 - How to add second Software Distribution?

I already have a Primary site server setup so I added another site system server so I could add the Distrubution Point to a remote 2012 R2 server (hope that was correct?)
Now I would like to also add the Software Distribution role to that secondary server. I'd like the types (security, optional, etc...), of software updates pulled from my primary site, but want the actually updates pulled from Microsoft. To have that setup
do I install the WSUS role on my secondary site server and then add the Software Update role?

Hi,
WSUS when used in SCCM as a SUP is only used for the clients to download the information about which updates exist, the actual updates are downloaded from the assigned DP. There is no way to configure a client to download security updates from SCCM and the
rest from Internet.
Yes, you did correct, it is not a Secondary site though it is a Site System for your Primary site if that is the same site server you are refereing to later.
The data actually downloaded by the clients from the SUP is not that much so it is normally no ide to install a new SUP.
Regards,
Jölrgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Bandwidth usage details in SCCM 2007 during software update deployment

Hi All,
How can we know or check that how much bandwidth has been used during software update activity in SCCM 2007

use performance monitor / performance counter perhaps
http://social.technet.microsoft.com/Forums/en-US/473bf861-6d81-4a3b-b603-2dfdbfa80c62/is-there-a-perfmon-counter-for-network-utilization?forum=perfmon
---Pat

Error 10038 - Software Distribution Paused

On one machine, I'm getting error 10038
"The program for advertisement "S0xxxxxx" has not been run yet ("S0yyyyyy" - "App - Install"). Software Distribution is currently paused on this computer, and it has to be resumed before this program can begin."
This is for all apps that should be run, mandatory and optional.
Matching error in execmgr.log file is "This program cannot run because a reboot is in progess or software distribution is paused."
Cause? Well, user inadvertantly ran a USMT capture TS the other day, which has a shutdown command at the end. Always works fine, normally. However, suspect but cannot confirm that user 'interfered' with the shutdown process, as they would have been seeing whole thing happen and probably not been happy about the shutdown as they were trying to work. (Let's not get into why users will blindly click on anything that pops up in their in-tray!)
Since then, no other adverts will run. Machine has been restarted several times.
So, how do I tell the client that it should unpause Software Distribution because there really is no restart or TS in progress anymore?
I have searched online, but there are almost no pages found relating to this error.
(NB: Client is Vista SP1, Site is SCCM SP1 with R2.)

Please have a look at those registry keys:
HKLM\SOFTWARE\Microsoft\SMS\Mobile Client\Software Distribution\State
HKLM\SOFTWARE\Microsoft\SMS\Task Sequence
There might be some values that were not set to 0 again (I have no ConfigMgr client right next to me but it was obvious what to set from 1 to 0 IIRC)
Just following up on my post, we upgraded to SP2, still an issue (random), not an issue with a specific TS (random again). After stumbling on another post somewhere and digging into the registry, changing the same above values mentioned by Torsten, resolved the issue.
All that I change is "HKLM\SOFTWARE\Microsoft\SMS\Mobile Client\Software Distribution\State" change the values for "Paused" and "Paused Cookie" to a 0 , so it reads 0x00000000 (0) this resolves the issue, at first I was stopping ccmexec, changing the value, starting ccmexec, but that is not required, just change the value and your good to go.
Roger Zanders SCCM Client Centre has this built in to client actions, confirmed what his action does and it just changes the registry value.
Now as this is a random issue for random clients and random TS, any ideas how we can get a permanent solution, is this classed as bug?
Proposing Torsten's response as the answer.

Ipod touch 3rd gen hang during software update

my ipod 3rd gen got hand during ios software update

Hang during restore process: Following Troubleshooting security software will frequently resolve this error. This error can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, Enterprise apps optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings. Follow the steps below to remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694

Time Capsule Falling Off Network During Heavy Activity

This basic topic has been previously posted but keeps getting hijacked by digression. To clearly state the behavior; Time Capsule falls-off (disappears) from a WiFi network during operations where large amounts of data is being moved. This occurs regardless of whether the internal drive or a connected USB drive is the target. This is not an internet issue.
Set-up: Time Capsule is extending an 802.11 b/g/n network originating from an AirPort Express. Time Machine is currently off (because this issue has made it unreliable). The TC has a USB drive with my iTunes library and documents folder. There is one client cpu, a current model Macbook. All drivers and firmware report "up to date." Interface robustness has been both on and off. I have gone to 802.11n only and the problem persists.
The Time Capsule will sit on the network for weeks without issue if data is not being passed to it. When I copy large amounts of data to the TC or the attached USB drive it will vanish off the network until I do a cold boot of it (the TC). I will get a system network error of "DATA-1 cannot be written to" when it happens, which is understandable since the TC is in Oz. I have parked on Channel 1 which reports unused by my sniffer; I have also hopped to other channels but the problem persists. This is a hi-rise apartment environment.
This has been an issue since day-one with this unit and I have brought it to the Genius who could not get it to repeat after hours of testing.

I can't help directly -- just got mine last night -- but to bump your thread and get some clarification...
You say your USB drive attached to the TC has your "iTunes library and documents folder", do you mean literally your Documents folder, or just a folder with documents?
Are you accessing the Internet through your TC, or is it attached to your network as just a device, and you have another router/gateway? When you say "drops off", do you mean you cannot mount it remotely and that's the only problem, or do you lose Internet connectivity -- if it's your gateway -- or does the Airport Utility not see it?
If it's a mounting problem, I assume you cannot see either the internal or external USB drive. Have you tried it without the external USB drive? (I assume that may have been a difference when the Mac Genius tried it. Did you also take your USB drive and did they leave it attached for their testing?)
What about things like temperature conditions, etc? Perhaps if where you keep it is very hot and the Apple Store is very air-conditioned?
Just throwing out a bunch of ideas and questions that might help someone see the problem. Clarification always helps.

Problem with Java and APC Network Shutdown Software

I am having an issue with APC's Network shutdown software. On any Win2k Server I load the software on after logging off from the console I am unable to reconnect to the web interface for the APC Powerchute Network Shutdown software. If I stop and restart the Powerchute Network shutdown service it is fine again until I log back off.
I opened a support ticket with APC but they told me this is due to a bug with the underlying JAVA software and I had to get support from Sun for this issue. They referenced Sun Bug Number #4619811 but when I checked that bug out it did not have a solution.
Any thoughts, this only seems to be affecting Win2k Servers, Win2k3 Servers work just fine.

Hi cptjim,
i have exactly the same problem on two totaly different Win2k3 machines.
APC told me to try the following (i haven�t tried so far, but will test and report on monday):
To find the APC Powerchute Network Shutdown Service in the registry, use the following path:
HKey_Local_Machine/System/CurrentControlSet/Services/PowerchuteNetworkShutdown/Parameters/AppParameters
Open up the AppParameters folder, right click, go to Modify and Add -Xrs before the following entry:
<space>-Xrs<space>-cp
.\lib\m11.jar;.\lib\collections.jar;.\lib\jsdk.jar;.\comp\AAOL.jar;.\comp\CommandFileRunner.jar;.\comp\EventLogger.jar;.\comp\http.jar;.\comp\Notifier.jar;.\comp\Omaha.jar;.\comp\PowerSourceAggregator.jar;.\comp\PSAggregator.jar;.\comp\RunTimeVerifier.jar;.\comp\Shutdowner.jar;.\comp\StdPowerSource.jar;.\comp\ps\StdPowerSource.jar;.\comp\shutdownerlets\OSshutdownerlet.jar;
com.apcc.m11.arch.application.Application
Hope this helps

When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

How to send the spool output to the specific user during ALE distribution

Hi All
In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075whenever user changed the internal order which is moved to the destination system because of change data setting in data element fields.
I want to know how to send the spool output of the changed internal order to the specific user during ALE distribution.
Please help me to reslove the above issue
Thanks & Regards
KRISHGUNA

Solved by myself

Adaptiva Software Distribution not working with Cisco APs in Local Mode

A worldwide customer would like to use a new Software distribution system called Adaptiva to replace SCCM within Windows environment. As far as I understand, Adaptiva is designed to work like a snowball system. A single PC at a remote side can be "infected" with new Software and will distribute the package to other PCs within the same IP-subnet, saving WAN bandwidth.
First tests are showing that it is working well with Cisco WLAN solution as long as we are using Flexconnect WLAN APs.
Customer locations with Local WLAN AP design create problems for this new software distribution method.
The WLAN-PCs can be reached from outside, but the establishment of the Client/Server-model between the WLAN Clients is not working. The Port used by this software for communication between clients in each WLAN subnet is UDP Port 34329.
Our WLCs are running at 7.4.130.0. The problem is appearing independently of AP Multicast settings or Broadcast Forwarding. Enabling Broadcast forwarding without Reboot did not improve the situation.
Global Multicast Mode and IGMP Snooping are also of no influence.
P2P Blocking Action is "Disabled" within the WLAN setup.
Who has any idea what might cause this communication problem between WLAN clients in Local Mode of APs ?
Thank You for answers
Wini

I can think of two solutions. You could 1: turn the "auto-lock" to never, so that your phone never sleeps. Or, you could 2: jailbreak your iPhone and install "insomnia". I wish we had the Cisco Mobile app. I usually use wifi/insomnia and turn data off at work since we have wireless pretty much everywhere...
Sent from Cisco Technical Support iPad App

Apple Mobile Device Support won't install via software distribution tool

Trying to install iTunes v10.0.1.22 in corporate environment using a software distribution application. The individual components Apple Application Support v1.3.2, QuickTime v7.68.75 and iTunes v10.0.1.22 all install successfully. Apple Mobile Device Support v3.2.0.47 fails with the following in the install log file:
DIFXAPP: ENTER: ProcessDriverPackages()
DIFXAPP: INFO: 'Component' is 'usbaapl.inf'
DIFXAPP: INFO: Component state 0x2 -> 0x3
DIFXAPP: INFO: 'ComponentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}
DIFXAPP: INFO: 'Flags' is 23
DIFXAPP: INFO: component path is C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\
DIFXAPP: INFO: user SID of user performing the install is 'S-1-5-21-1960408961-436374069-1801674531-500'.
DIFXAPP: INFO: creating HKEY_USERS\S-1-5-21-1960408961-436374069-1801674531-500\Software\Microsoft\Wind ows\CurrentVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593} (User's SID: 'S-1-5-21-1960408961-436374069-1801674531-500') ...
DIFXAPP: ERROR 0x57 encountered while creating subkey for component '{9AA3828A-F852-11DB-8E29-6C6B55D89593}'
DIFXAPP: RETURN: ProcessDriverPackages() 87 (0x57)
Action ended 15:59:25: MsiProcessDrivers. Return value 3.
Action ended 15:59:25: INSTALL. Return value 3.
The Apple Mobile Device Support component installs without failure when run manually from a command line but we have not been able to find a way to successfully install running an unattended install via a remote management software distribution tool (in this case Tivoli).
Please help, we need to roll this out to corporate executives to support the new iPhones being supplied to them.

Trying to install iTunes v10.0.1.22 in corporate environment using a software distribution application. The individual components Apple Application Support v1.3.2, QuickTime v7.68.75 and iTunes v10.0.1.22 all install successfully. Apple Mobile Device Support v3.2.0.47 fails with the following in the install log file:
DIFXAPP: ENTER: ProcessDriverPackages()
DIFXAPP: INFO: 'Component' is 'usbaapl.inf'
DIFXAPP: INFO: Component state 0x2 -> 0x3
DIFXAPP: INFO: 'ComponentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}
DIFXAPP: INFO: 'Flags' is 23
DIFXAPP: INFO: component path is C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\
DIFXAPP: INFO: user SID of user performing the install is 'S-1-5-21-1960408961-436374069-1801674531-500'.
DIFXAPP: INFO: creating HKEY_USERS\S-1-5-21-1960408961-436374069-1801674531-500\Software\Microsoft\Wind ows\CurrentVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593} (User's SID: 'S-1-5-21-1960408961-436374069-1801674531-500') ...
DIFXAPP: ERROR 0x57 encountered while creating subkey for component '{9AA3828A-F852-11DB-8E29-6C6B55D89593}'
DIFXAPP: RETURN: ProcessDriverPackages() 87 (0x57)
Action ended 15:59:25: MsiProcessDrivers. Return value 3.
Action ended 15:59:25: INSTALL. Return value 3.
The Apple Mobile Device Support component installs without failure when run manually from a command line but we have not been able to find a way to successfully install running an unattended install via a remote management software distribution tool (in this case Tivoli).
Please help, we need to roll this out to corporate executives to support the new iPhones being supplied to them.

My new ipad froze during software update thru itunes. The normal reset tructions do not work and itunes on my pc no longer recognizes my ipad. how do i get past this issue?

My new IPAD froze during software update thru itunes on my winows PC. The normal reset instructions holding the home and power buttons do not work. Itunes no longer recognizes my IPAD. What can i do?

See here -
Recovery Mode
http://support.apple.com/kb/HT1808
iPad not showing up in iTunes on a PC
http://www.apple.com/support/ipad/assistant/itunes/
iPad not showing up on a Mac
http://support.apple.com/kb/TS1591

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

I need free network analyzer software for my mac. we are trying to monitor what software may be running which is causing our internet to fail, although the internet is still coming into our modem.what is recommended?

My internet keeps 'tripping' at or around the same period time each day. We have already replaced our modem from our internet provider and we bought a new airport extreme router. We do not believe these were the cause, although we have now ruled them out as a cause. Everytime the internet fails, our internet provider company tells us that there is still plenty of signal coming into our house. There is something going on inside we believe, and a technician set up our Network Utility to run a continuous ping test to capture information about when it 'trips' againn. Yesterday, it happened again, and when he checked the data out, he said he is sure there is something 'running in the background' on my IMac. He advised me to download a free Network Analyzer so he could further investigate what is was that was causing the problem, so I need a free network analyzer software for my Mac. The issue has been going on for a long time, so it is not the new operating system, Lion. This morning, we changed the radio channel from 'auto' to 'manual' and set a new channel, hoping that might help. We are trying to find out what program may be running (even a tiny one in the background) which is causing our internet to fail, although the internet is still coming into our modem. What is free downloadable product is recommended?

Will Activity Monitor and/or Network Utility, both already in the Utilities folder on your Mac, help in trying to diagnose the problem.
If you are connecting via wifi what encryption are you using? If you're using the Exteme I doubt that you are using WEP, but worth checking as it seems Macs don't like it and work better using WPA.

Spikes on network during software distribution or site Migration eventhough throttling enabled

Similar Messages

Maybe you are looking for