Steps to integrate SRM system and portal?

Hi Gurus,
I am working on EP 7.0 ow i got a requirement to integrate Portal system with SRM system.
Kindly send me the step by step approach of the same.
Thanks in Advance,
Dharani

Hi,
In order to integrate SRM system with portal system download two business packages for SRM BP for SRM and BP for Supplier Collaboration from SDN Content Portfolio:
(https://www.sdn.sap.com/irj/sdn/contentportfolio) and then deploy these on EP 7.0 server with the help of software deployment manager onto the enterprise portal server. When download these business packages you get online documentation which explains detailed steps.
Hope it helps.
Regards,
Mona

Similar Messages

How to Integrate Client system and Server system?

How to Integrate Client system and Server system?
A scenario which is working successfully in server system, not working in client system.
help me out in this issue.
pankaj.

Hi Bhavesh,
server system means where we have xi inst.
client system means where we have only GUI inst.(front end).
The scenario working in server system (picking file and posting it in to the target place)
but the same not working in client system.

How do I create a new shopping cart in the SRM system (not portal)

Hi,
I'm working on a test landscape with Purchase request WF. I want to create a new shopping cart from the SAP system, not from the portal, and this purchase request should go to a manager approval.
I've been told that I need a SRM system.
Could you please tell me what the transaction for creating new shopping cart is? Could you also explain me what to do with this transaction or point to a doc I can learn from?
Thanks

it is called planned driven procurement scenario in SRM
ECC box
1. create a Purchase request
2. Approve the Purchase request
3. now check EPRTRANS table . you might have Purchase request number ( if you have already set up done in ECC system for Plan driven procurement)
4. Run BBP_EXTREQ_TRANSFER job
SRM Box..
5. Now you can see your shopping cart for this purchase request (External requirement) in the sourcing cockpit.
Muthu

Steps to configure BI system to portal system

Hi Everyone,
I am new to Portals. Can anybody tell me the steps invloved in configuring BI system to Portal. I want to publish the BEx Reports into portal. I am not able to understand, though I had collected information and files regarding it.
Thanks in Advance,
Jayasree

Hello Jayasree,
1. Navigate to System Admin-> System Config -> System Landscape -> Portal Content
2. Select a folder in which you want to create the BI reference system
3. Right click -> New -> System. Select a dedicated system
4. Please read more on this link: http://help.sap.com/saphelp_nw04/helpdata/en/ec/0fe43d19734b5ae10000000a11405a/frameset.htm
Also send me a test email (check my business card for it) & ill send you a snapshot document on the above.
5. After system creation, you need to create a Web Report iView, put in the BEx report URL
Connection between Portal and BI complete.
Regards,
Ritu

Steps To Integrate/ Comuunicate Workflow and MS Outlook?

I want to Make Integration between SAP Workflow and MS Outlook.
Can any one Please tell me how to do it?

Hello,
"Is it Possible to add our own code into workflow for sending this email?"
Sure. If it's a standard workflow then copy it first, then change and use the copy.
Please open a new thead for a new question. This one is already marked as answered.
regards
Rick Bakker
Hanabi Technology

SRM Master data - Starters(New employee) and leavers(existing employee) process and updates to SRM system

Hi Team,
What is the process when New employee Join the Organization and how it updates to SRM System?
What is the process when existing employee Leaves the Organization and how it updates to SRM System?
Thanks & Regards,
Rameshwar.

Hi Rameshwar,
The process and approach may differ organization to organization.
However, let me tell you what process we follow -
1.     Whenever the New employee or User joins organization it is automatically updated in the Idm (Identity management system). Hope you are aware of this application.
2.     The User who wants access to SRM as the end user will apply for the specified roles (Portal roles for Portal access & SAP roles for shopping) through Idm. The Idm is connected to the SRM system and whenever there is a addition / change/ update in Idm it will also update the SRM system.
3.     Only for SAP Approver roles we have WORKFLOW setup in Idm.So that the user is created in the SRM system with specified approver roles only after approval is completed in Idm.
For Requester role there is normal workflow.
4. Once it is approved, the user is created in the SRM system and we can check in SU01D
5.     This is User creation centrally. However, if you have admin access you can also directly create in SRM using SU01 transaction.
6.     Once the user is created with specified roles, we need to manually put the user in PPOMA orgnaization strcuture.
7.    Same procedure is followed when the employee is left the organization.
8. Throught IDm we remove all the authorization to SRM. however the user gets deleted in SRM but the Assignment still remains in the PPOMA. Which the consultant has to delete it manually.
9. Hope this process helps you in some way.
Thanks.
From RBEI,
Snehal

Adding system and client specific TMS approval steps

Hello,
In defining QA approval steps, how to define a step which is not system and client wide?
When adding a new step, it is automaticaly defined with * in the client and system fields, and when changing the steps, these fields are not editable. However, there are several approval steps for which a specific system and client are entered, but this was done by a consultant, who was here some years ago.
Does anyone know how to do this?
Thanks in advance,
A

Hi Aleksandra,
Did you ever find a solution to this issue. I too have multiple QA systems in our landscape (4 system landscape), and yet I can not defined system/client specific approval procedures in STMS.
The system and client options don't even appear when I go into change mode, yet table TMSQASTEPS has the options available. Direct table update works fine, but it would be nice to know the "SAP standard" way of doing this.
Cheers
Shaun

Technical systems and Business systems in SAP XI

can any one tell me ,breifly explain the diff b/w Technical Systems & Business Systems?
steps to create Techincal system and Business systems?
and also Steps for creating Software Components? For Technical System we can create more than one Business systems ,what it means?can any one explain?

Hi
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
U can also refer Blog's
Re: Difference betweeen Technical systems and Business systems
For creation of software component see link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3172d290-0201-0010-2b80-c59c8292dcc9
Reward point if it help u understand

Message was edited by:
Ajay Kumar

Parties, Business Systems and Business Services

Hi guys,
I've read a lot about items in subject, but have some doubts about applying them to my scenario. I have to integrate SAP system and web service.
As far as I understand concepts, this is B2B communication, so I have to use parties. To represent SAP system I use Business System, as it's described ins SLD, and for Web service I use Business Service... just as we use business services for web services
--- Am I right here? Will it work ok in reciever determination, agreement?
Thank you.

Hi,
You are doing the usage of business systems and services in proper way.
The scenario will difinately work with combination of business system and service.
It will be fine for all other configurations such as Receiver Determination, Sender/receiver agreements and interface determination etc.
Please see below the importance of Parties, Business Systems and Business Services
A communication party
A communication party (party for short) represents a larger unit, which is involved in a collaborative process. Using a communication party, you generally address a company within a cross-company process.
You can assign a communication party one or more services to address it as the sender or receiver of messages.
A business system
If you want to address a particular business system as the sender or receiver of messages, choose this service type.
A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
You usually use business system services when configuring internal company processes.
A business service
If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
Thanks
Swarup

Automatic Replication of Vendors from SAP R/3 Backend System to SRM System

Hi All,
I am searching for any existing standard configuration in SRM V 4.0 System for replicating Vendors of selected Purchasing Organizations from SAP R/3 Backend System to SRM System.
I have checked in the SPRO settings of SRM System and found/could make out from the documentation avalable in help itself, that there is a standard configuration by which you can automatically replicate the Vendors created in SAP R/3 by activating the following in SPRO: By putting a tick mark against the Check Box existing against "Create New Vendors also" under Vendor Synchronization with Make Global Settings I hope.
If the above statement is correct, then I hope we have to schedule a job ,since the above configuration is based on a job based execution which should run at least once a day.
In that case,which would be the relevant job which has to be created WITH A VARIANT in order to filter the Purchasing Organizations desired for.
Please help me out since we have to implement this asap.And if the above solution is not at all feasible,then please do reply at the earliest.
Awaiting for your early reply .
Regards
Annette

Hi
Please try this ->
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
Regards
- Atul

Invoice deletion in SRM system

Hi All,
We are using the extended classic scenario.An invoice has to be deleted from SRM system having staus "awaiting approval".
(p.s:the invoice is still in the SRM system and it is not posted in the backend)
When we tried deleting the invoice ,a Pop-up message appears u201CThis Document is locked by another Useru201D .
Tried to check if it is stuck in the workflow but havent found any entry in the table BBP_WFLOCK.
Kindly advise on how to go about deleting the invoice.

Yes it is still showing the same pop up message "locked by another user"
We believe it is stuck in the workflow.
Could you please suggest an alternative on how to delete the invoice.
Quick reply is appreciated.
Thanks in advance.

How to create 'system' in Portal for backend

Hi Basis Gurus,
Please let me know how to create a 'system' for a backend system in Portal 'system administration' --> 'system configuration' --> 'system landscape'.
i.e. which properties I need to fill up, assuming the backend system is release 700 ABAP system and Portal is at release 640.
Thanks & Regards,
Kunal.

Hi,
Please check the following links..
[Creating Systems|http://help.sap.com/saphelp_nw70/helpdata/EN/ec/0fe43d19734b5ae10000000a11405a/content.htm]
[Editing Systems|http://help.sap.com/saphelp_nw70/helpdata/EN/42/11e43d19734b5ae10000000a11405a/content.htm]
Regards,
Murthi...

Workflow and Portal

Hi all,
Does anybody know how can i integrate workflow2.6 and Portal release 2? if anybody has an example, please send me. [email protected]

Hi,
You can find documents on this in portalcenter.oracle.com
Thanks,
Sharmila

SRM One Client + Portal and MDM system on top of SAP EHP4 system

Hi!
we successfully upgraded SAP ERP 6.0 system to SAP EHP4.
Now we would like to extend the functionality by adding the following components:
- SRM One Client
- Portal and MDM
Question:
1) Can some one explain the procedure to do this?
2 Where can I find the Installation files and documentation?
Any helpful information will be very appreciated

Hi!
Thank you very much for your response!!
My actual situation:
I have a EHP4 for SAP ERP which has only ABAP stack.
Questions
1) Should/must I install a Java-Add In Instance?
a) Is it possible to install a Java Add In Instance for EHP4 ERP system or do I need only a extra/new Windows server for this?
b) what are the must usage scenarios I have to choose for the Java installation (Portal, MDM, PI)?
2) what is the exact installation sequence (SRM One Client, SRM MDM, NW Portal)?
Thank you very much!

Creating system in portal for the backend SRM

Dear All,
We are in the process of setting up a system in portal for the backend SRM system
I have tried to create system in System admin--> System configuration --.>System landscape
For SAP Web AS Connection , the parameters maintained are:
Hostname : <FQ hostname>:8000 ( 8000 is the HTTP port for ICM)
Web AS path: /sap/bc/webdynpro
protocol :8000
But test is failing as 'An HTTP/S connection to http://xxxxxxxxx::8000/sap/bc/webdynpro was not obtained successfully; this might be due to a closed port on the Firewall:
test details:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (bhidfwao06.ent.bhicorp.com:8000)
5. The host name bhidfwao06.ent.bhicorp.com was resolved successfully.
6. The Web AS ping service http://bhidfwao06.ent.bhicorp.com:8000/sap/bc/ping was pinged successfully.
7. An HTTP/S connection to http://xxxxxxxxx::8000/sap/bc/webdynpro was not obtained successfully; this might be due to a closed port on the Firewall.
Is there any problem with the port, I doublechecked and the port for HTTP is 8000.
If I give the Web AS path: /sap/bc/bsp test is successful.
Any pointers please?
Regards,
Arun

hi arun,
u may have to activate some more services in sicf
u can follow this link what are the neccesary applicaiton need in sicf
http://help.sap.com/saphelp_nw70/helpdata/EN/46/d28dfa34bb12bee10000000a1553f7/frameset.htm
let me know u need any further information
ravindra

Steps to integrate SRM system and portal?

Similar Messages

Maybe you are looking for