Stereo Pairs

I have a question in regards stereo pairs is there any way around that when creating a stereo pair from two audio clip that final cut will not take the audio level settings from the clip above. I am doing mainly weddings and we use two wireless mics one on the left and one on the right channel, So I set audio levels etc for each track but in the end I want to put on a parametric filter to limit noise etc instead of doing each track i thought i can make a stereo pair out of it but as soon I do that it will take the audio levels from the top track and changes the bottom track. checked the manual and it says it in there it would do that but is there a way around, I tried nesting the clip but not to sure if my computer is not fast enough 4GB ram and a MacBook pro i always need to render the clip and when I put an audio filter on it every change I do i need to re render. Any advise

Making a stereo pair out of two tracks just to add filters is the wrong reason to make a stereo pair. Since you want to keep the levels, and possibly the pan settings for each clip, add the filter you want only to the clips that need it. Add it to one, then copy that clip; select all other you want to add it to, right-click on one and select Paste Attributes, then check the Audio Filters button.
-DH

Similar Messages

  • Is there a way to select multiple clips in FCP 7 and make all of them stereo pair at the same time?

    I know,....  I'm still using FCP 7,  but since there are no forums for this aaplication anymore,  I figured I ask it here.
    I want to select multiple clips on the timeline and make them all stereo pair.  I pressed "Option L", but that does not work.  Is there a way to do this?
    Thanks,
    Lisa

    https://discussions.apple.com/community/professional_applications/final_cut_stud io
    Al

  • Is there a way to select multiple audio tracks and make all of them stereo pair at the same time?

    I selected multiple tracks, pressed "option L" but was not able to make multiple clips stereo pair at the same time.

    If I remember correctly it is not possible modify a group of selected clips on the timeline with the Stereo Pair command - unless all the selected clips have exactly the same properties - such as being linked to  video clips, etc. So you have to manually go through and select the dual mono tracks you want to pair individually or in smaller groups to be able to apply the Stereo Pair command.
    If you select a bunch (a couple)  of clips, and go to the menu Modify, you will see if Stereo Pair is grayed out or not. If it is grayed out, then you can't apply it to those clips as a group, but you probably will be able to apply it if you make smaller selections of clips.
    MtD

  • Mass Change of Stereo Pairs

    I have about 150 clips in my bin that are not marked as stereo pairs. When I put them on my timeline, I can change each one individually (via option-L via the keyboard, eg) but is there a way to mark them all from the browser? Also, was there a way that I should have been capturing them to make this happen automatically?
    Thanks!

    You are capturing as dual mono, not stereo. In the Clip Settings window of the Log & Capture utility, there is a button with two individual circles. Click it, and it will link the two circles and you will now capture stereo pairs.
    As for changing the existing clips, string them all out onto a timeline. Select them all, go to Modify>Stereo Pair. Now drag them back to the browser and use those, instead of the individual files. May want to drag the old clips into a new bin so you can tell them apart.

  • Multiple Stereo Pairs in Compressor

    Hi,
    I'm having a problem with exporting fcp projects and getting the correct audio on output.
    The fcp project has multiple, normally 2 stereo pairs (4 tracks in total). When I send the project to compressor I have a preset setup to create a quicktime mov, using the mpeg imx 625/50 as the video codec, and getting the correct audio codec is where I am having a problem, if I select pass through as the audio setting. When I apply it to the project it changes to 3.1 (L,R,lfe,C) Linear PCM, 32 bit, 48k,(the PCM and 48k at least are correct the res is not) it appears to me when pass through is selected it selects what it thinks is the correct settings that it has. Of all the settings that are available everything can be changed apart from the channel configuration, there is no option available that gives me the correct result. 4.0 (L,R,C,Cs) comes closest (audio levels remain the same, stereo pairing is lost, becomes 4 discreet channels in fcp)
    Has anyone encountered the same problem? Anyone have any ideas how I can get this correctly configured?
    I need the output to be(taken from an existing file exported in fcp in quicktime)
    Apple MPEG IMX 625/50 (50 Mb/s), 720 x 576, Millions
    24-bit Integer (Little Endian), Stereo, 48.000 kHz
    24-bit Integer (Little Endian), Stereo, 48.000 kHz
    Thanks in advance

    Ben, who has a pretty good batting average round here, probably meant to say "That's the H.264 limitation when using Compressor."
    Multiple audio tracks in H.264 seems to only be possible using third party applications but I'm making this statement only after superficial research, never tried it myself and I have only limited experience with Episode, never even heard of the other products you mention.
    Your experience with multiple track output in H.264 trumps that of the elitists and I appreciate you starting the thread, Steve; I learn something new here every day if I pay attention.
    bogiesan

  • How to make two mono audio tracks into a stereo pair?

    My video clip, brought over into Premiere CS6 from Final Cut Pro 5, has the usual left and right audio tracks, but in Premiere they are not linked into a stereo pair. Thus the volume level has to be adjusted separately in each track.
    In Final Cut, I can quickly convert two independent audio tracks into a stero pair by selecting the tracks and then going to the menu Modify > Stereo Pair.  I can't figure out how to do this in Premiere.
    When two audio tracks are not linked, the volume level has to be adjusted separately in each track, which wastes time. But after two tracks are linked into a Stereo Pair in Final Cut, adjusting either track adjusts them both, together. That's what I want to do now in Premiere.
    So, how do I make two separate audio tracks into a linked Stereo Pair in Premiere?
    Tom

    Hi Tom,
    Tom77 wrote:
    I need to do in my videos that I either can't do in Premiere or that require involved workarounds like this, things that I can do instantly
    I used to think like you do. These aren't workarounds, per se. The issue is that Premiere Pro is a different program, so you have to approach some things slightly differently.
    Actually, Premiere Pro's audio capability is more like a DAW than Final Cut was, and more powerful too, so if you know that workflow it makes more sense. A lot of FCP people don't have training in programs like ProTools or Audition, so it's more difficult for folks like yourself (and me, too) to catch on. Once you learn it, though, you begin to see its power.
    Tom77 wrote:
    things that I can do instantly with the flick of a keyboard command in Final Cut, such as link and unlink audio tracks.
    In Premiere Pro CC, you can link and unlink audio and video tracks with a keyboard shortcut for "Linked Selection." You have to create it in your Keyboard Shortcuts dialog box, but it works just like the one in FCP. Make it Shift + L if you like.
    Tom77 wrote:
    Not to mention the fact that I can have as many projects open in Final Cut as I want, and copy and paste between them. Each open project becomes a tab on the timeline, and I can jump beween projects by just clicking on their tabs. I was shocked when I tried to open two projects in Premiere to find that it only allows one at a time to be open. That seems really primitive--
    Again, you can achieve what you want (copying and using items from other projects), you just have to go about it differently. All you do is navigate to the other project files in the Media Browser and import items that you need in this fashion. So, no, you don't have more than one project open at a time, but you got what you wanted, stuff from another projects in your current project. That works for me, anyway.
    Again, Premiere Pro is a different program. You can achieve the same goals, but sometimes have to go about it differently. Some things are faster, some slower. Some are easier to learn, some harder. Hopefully, you see my point.
    I need video generators to make arrows, circles, squares, etc. and transitions such as edge wipes and clock wipes to animate them, all to point out and emphasize things that I'm demonstrating and explaining in my videos. Premiere has no such generators, nor are there any third-party plug-ins available to add them, that I've been able to find.
    Do you know about the Titler? It has a lot of useful shapes. You can also create shapes in After Effects and Photoshop and import them. The shapes you make in those programs can look a lot better than the stock FCP effects.
    There are lots of third party effects, some that have generators. Check out Boris Continuum, FX Factory, CoreMelt, Film Impact, and more.
    There are pitifully few transitions in Premiere at all (the Mac version) compared to Final Cut.
    I'm really not a transitions person, and I find the FCP transitions looking tired anyway. The only one I really need is a white flash and I can either create it, or use a third party flash effect. If you need cool, modern transitions, check out Film Impact or the other third party plug in foundries I mentioned. There is an Edge Wipe transition, called "Wipe." If you need feathering, check out the Wipe Effect, which you can keyframe to look like a transition.
    More and more I would like to be moving completely into Premiere, but I keep running into these inadequacies in the program, these roadblocks, for my purposes at least.
    The more you work with it, the less you'll be working with FCP. That's what most people are saying anyway. Sure, there are minor annoyances associated with learning a new app, but you also take the good along with it. I suggest you just dive right in. It may take longer at first, but you can get your speed up in time.
    I have no doubt that sometime in the future Premiere will become everything that I want it to be, and at that time I can finally abandon Final Cut for good, as I wish I could do right now.
    I also came from FCP, taught FCP for nearly a decade, wrote a book about FCP, help start the first FCPUG, worked at Apple on two versions of FC Studio, so I do know what you are going through. Just keep at it and keep posting here. I'll be glad to help you with any workarounds or confusion related to moving over from FCP.
    Thanks,
    Kevin

  • Using iMovie 09 with stereo pairs?

    Talking to the geniuses at the local Apple store, it seems clear that iMovie 09 saves Ken Burns pan/crops to the images, not as separate data. This makes it difficult to create identical moves on matching stereo pairs, as the camera pans and crops would have to be exactly the same for the right and left views of the pair.
    I'm thinking there's a work around for this limitation but I need to learn more about how iMovie saves its files.
    Consider the case where a transition and pan/crop is created for successive right view images, then this is exported as a Quicktime movie, then iMovie is closed. If it is possible in Finder (not in iMovie) to substitute the left view image source files for the right view image source files, using precisely the same file names, then when iMovie opens again it would not know the difference and could export a left view Quicktime movie.
    But I can't investigate this hypothesis because I can't find the source files that iMovie uses. Performing a swap out with the original files has no effect (at least, I saw no change in the thumbnails and the playback when using well marked test files. So are there hidden copies of the source files that iMovie uses? And if so, how do I locate these so I can swap them out?
    I hope I'm making myself clear here. When I explained what I was trying to do at the Apple store today, the geniuses required several reiterations before they got it, because my intent is so unconventional and they had no reference point. But they did get it, as far as using iMovie as it was designed to be used, and said, no, you can't do this with iMovie because swapping out images within the program removes any Ken Burns pan/crops you have set for them. And there is no way to numerically set these parameters so they are identical in a new movie to those in a different movie.
    I didn't ask them about a workaround that would fool iMovie when it is reopened into thinking it is using the same images, but I'm asking here. If I know how to locate those source image files, I can do the rest.
    Or am I completely missing something that should be obvious?
    (There's software for Windows called ProShow Gold that allows saving camera movements separately from images, and this is used for making stereoscopic slide shows with Ken Burns pan/crops. But I want to do this on a Mac.)
    Thanks.
    SMcQ

    Karsten,
    Thanks for that link! I think your arrows will point me in the right direction.
    In my effort, the images for stereo projection are placed side by side as a pair in a shared frame, 2800x1050 total resolution. Quicktime Pro can make these and show these, and also a free stereo avi editor called Stereo Movie Maker for Windows. For stereo 3D from start to finish, it is important to be cross platform proficient. Of course, the Mac can make this OS switch, but I'd like to see more stereo 3D options in Mac native software, because right now, there aren't any. Our projection software is a custom build by programmers at UC Davis and our projection system runs from an Intel Mac Pro feeding dual Hitachi projectors.
    I made a movie of a slide show with iPhoto, using 19th Century stereocard views, but wanted to take the presentation into Ken Burns territory with camera moves that are coordinated between the right and left views. I think iMovie 09 can do this with some, as you say, (ab)use. Hackers are the bleeding edge, right?
    Our stereo theater is at Lake Tahoe, Incline Village, Nevada, within the UC Davis Tahoe Environmental Research Center located on the Sierra Nevada College campus. The building is too new to see on Google Earth (or Google Earth imagery is too behind to show a building four years old).
    http://terc.ucdavis.edu/education_outreach/educationoutreach.html
    Thanks for your help!
    SMcQ

  • How do I set up an MS Stereo Pair in Logic 7?

    So we are now dabbling into the MS Stereo pair for our recording tech class and I can't seem to find an easy way of doing this. Any suggestions? I can't find a real time phase inversion plug-in or button anywhere other than going through the wave editor and doing it that way, which doesnt help much. Pro Tools and DP for instance have plug-ins that do the 180 degrees out of phase type switchup. Anything like that in Logic... still can't find one. Is there a free downloadable one that some of you out there prefer? Thanks!
    ~trevor

    I use MS all the time. Put an MS setup in front of the drumkit about 4-6 feet away pointing right between the kick and snare. You can change the width later to taste.
    Yes, all you need to do is setup a stereo track and put the direction mixer plug in the first slot with the MS button clicked on. It does all the decoding for you. The only thing you need to make sure of is that you have the inputs set properly. If you've got the inputs set to Input 1-2, you need to have the mid mic on input 1 and the side mic on input 2.

  • Premiere Pro Can Capture Only One Stereo Pair?

    I'm thinking of getting PPro CS 5.5, so I'm reading the Help file to learn about it first and I came across this listed under "Importing Digital Audio":
    1) "Although the DV format can record two independent stereo audio pairs, Premiere Pro can capture only one stereo pair.
    It may be possible to select either stereo pair 1, stereo pair 2, or a mix of both, depending on the DV hardware you use."
    Does this mean if I have 2 mic's connected to my camera, PPro can only capture 1 stereo pair or the other or a "mix" of both?  What does that mean?
    Would I be able to edit both stereo pairs as separate tracks on the timeline?
    Any help would be greatly appreciated.

    Harm,
    The specs on the Canon HV20 say DV can do 2  channels in 16 bit mode and 4 channels in 12 bit mode.
    But I want to start using HDV, which can only do 2 channels in 16 bit mode.  HDV uses MPEG-1 Audio Layer 2, 16 bit, 48 kHz, transfer rate 384 kbps (2 channels).
    The DV settings are PCM digital sound with 2 modes: 16 bit, 48 kHz/2 channels and in 12 bit mode is 32 kHz/4 channels.
    Is a "stereo pair" 2 channels? 

  • Can't capture audio in  stereo pair

    I have FCE HD 3.0 and the audio capture default has always been stereo pair. Just now, since having to trash preferences, the default capture is now mono. Thanks to the forum, I know how to modify>link stereo in the timeline, but could anyone explain how I could reset preference to capture audio stereo?

    You can't.

  • How to export QT with 2-Stereo pairs?

    I'm trying to export from a Quicktime which has 2 stereo pairs. The resulting Quicktime would look like this:
    (the above was exported from FCP7).
    The reason we are looking for this is because we deliver our masters (as im sure many others do) with tracks 1&2 Full Mix, Tracks 3&4 M+E. The benifit by having the audio appear as two stereo pairs is that the client can disable a pair through quicktime, thus we can deliver a wrapped file (rather than a video and two stereo wav files.). Its also benificial for us as we can QC the file by simply checking the QT proporties to make sure there are two tracks, and soloing each.
    Using the new October release of PP CC I HAVE been able to export a quicktime with 4 mono tracks however QT displays this as one multichanel audio stream.
    Googling around I have found this post, which seems to show a screenshot of the QT audio export settings (see below) with the option to export 2 stero pairs, however my version of Premiere Pro (CC 7.1.0) does not have this option. All I get is the option of unlabled or DTMPE...
    Not being able to do this is currently the last remaining 'feature' that PP lacks that is preventing our company from making the switch to PP from FCP7 :'(
    me: "new version of PP is out, addresses all those things you didnt like lets start migrating!!"
    person with money: "can we do 2 stereo pair output?"
    me: "... no"
    them: "no."

    "unlabeled" and "DTMPE" are options for Channel Layout Setting.
    Stereo Pairs is under Audio Track Layout, which is just above Channel Layout.

  • How can I export 6 mono tracks and a one track two channel stereo pair in a quicktime as separate tracks?

    I'm using Premiere Pro CC 2014 (8.1) and need to export a 5.1 mix as well as the stereo tracks as 7 separate tracks in a quicktime. If I select 8 channels it automatically creates 8 tracks. Also, if I export the the seventh stereo track as mono track won't it play mono?
    Thanks in advance for nay help you can offer.
    -Sam

    Hi Richard and Kevin.
    First of all thanks so much for the response and info. Just to clarify, you're saying I will need  8 tracks, 2 of which will be designated for the stereo pair, right? My concern is that I'm supposed to deliver only 7 tracks. They want the stereo pair as separate channels on one track. I'm wondering if I can create a one track stereo pair and put it on a stereo track, then export only the seven mono tracks (plus an empty track). Would the stereo still work?
    Thanks for the link to the previous post. I had actually read it and though it was helpful in explaining how to set up the audio tracks I was still confused about the export.
    Much thanks,
    Sam

  • 3 audio tracks (centre,right,çeft) : How to make stereo pairs?

    Hi,
    Working with one video track and three audio tracks (recorded as Centre, Left and Right) for each clip.
    Having problems when I do overlaps or fades manually. I need to treat each track separately as not possible to make them a stereo pair.
    Should I duplicate the Centre track and make it a stereo pair and make another stereo pair with Left/Right.
    What should be the easiest way/workaround to treat/link the audio tracks so that sound transitions like manual overlaps/fades can be done?
    Thanx

    Hi-
    Do your manual fade on one track of the three. Select the track with the manual fade and type command+C to copy it. Select the other two tracks and type Option+V. A window will open that will let you choose to paste only your level settings, pan, or content or any combination of those.
    If you have elaborate manual mixing you might want to razor blade just the section of the the three audio clips you want to apply the sound transition to - so as not to disturb other parts of the mix.
    Hope this helps.
    MtD

  • LPX - Two Mono Busses as Stereo pair?

    I do this all the time in LP-9
    It's a quick way to setup parallel processing ...
    or have total control over a stereo Mic'ed track.
    The icons and choices look like they should work!
    (stereo left for bus1 and stereo right for bus2)
    ... but no ... they don't
    Anyone else experiencing this?
    Thanks

    Just put the clips into a timeline and change them to stereo pair Opt-L. You can put them back in the canvas after that. No need to recompress.

  • Making tracks a stereo pair

    I don't think it's possible, but...is there a way to join audio tracks, making all the clips a stereo pair at once -- rather than one at a time?

    Which version of the software are you using? It works for me in 3.5, and as far as I know it's always worked that way. Select the clips in the timeline and press Option-L. That should toggle stereo pair on and off. That's assuming there are two tracks for audio for each clip that can be changed into a stereo pair.

Maybe you are looking for